forked from openwrt/openwrt
-
-
Notifications
You must be signed in to change notification settings - Fork 5
/
302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch
461 lines (412 loc) · 11.1 KB
/
302-dts-0006-arm64-dts-ls1012a-accumulated-change-for-ls1012a-boa.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
From 8fd1ab38e922383fa87db60c48c44ab0d5e6f1c1 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Thu, 2 May 2019 15:52:49 -0500
Subject: [PATCH] arm64: dts: ls1012a: accumulated change for ls1012a boards
commit 65c558ec270003e8e99cb58c940d3b913d08fa39
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Tue May 15 08:47:19 2018 +0800
arm64: dts: ls1012a: correct the register range of dcfg
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 8f7b4cded4ea1fca53516ae8f5d5bc89af291f26
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Mon May 7 11:52:04 2018 +0530
arm64: dts: ls1012a: Add LS1012A-FRWY board support
LS1012A-FRWY is a different design from LS1012A-FRDM,
but has some common SoC features. Key feature on this
board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR,
QuadSPI, Audio, UART.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
commit 94fc77837b3b6f4213a49b29ddc3e09e38ae5fbb
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Mon Apr 2 16:16:47 2018 +0800
arm64: dts: ls1012a: add dts entry for A-010650
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit d4164a6d8cffd8f09c451073754834d58b7ace19
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date: Thu Feb 1 23:44:15 2018 +0530
arm64: dts: freescale: ls1012a: Add DT nodes for qspi
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
commit 4fdc98a03492b732a48426a4180f7d6a36847e71
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Wed Nov 1 10:31:47 2017 +0800
arm64: dts: ls1012a: correct the i2c clock to 1/4 platform pll
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit bb534725996b92aff853a4dee43738629fd4ac08
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Wed Nov 29 06:31:23 2017 +0530
arm64: dts: freescale: ls1012a: Disable PCIe node as default
Keep PCIe node in "disabled" status as SoC default.
Only enable it for boards with PCIe circuit designed,
such as LS1012ARDB and LS1012AQDS.
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
commit 6b9a3244baba2c5126f349800ecaad83ba97ee47
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date: Mon Oct 16 12:25:19 2017 +0530
arm64: dts: freescale: ls1012a: fix RGMII tx delay issue
Recently logic to enable RGMII tx delay was changed by
below patch.
https://patchwork.kernel.org/patch/9447581/
Based on the patch, enabling tx delay again using rgmii-txid.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
commit 1e17e247088f6e2c08041559e38053b70a9d2bbe
Author: Calvin Johnson <calvin.johnson@nxp.com>
Date: Sat Sep 16 14:20:23 2017 +0530
arm64: dts: freescale: ls1012a: update with pppfe support
Update ls1012a dtsi and platform dts files with
support for ppfe.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>
commit e9661ed864d2a9d437057f97729410bb9af994f2
Author: Suresh Gupta <suresh.gupta@nxp.com>
Date: Tue May 16 17:17:21 2017 +0530
arm64: dts: ls1012a: add the DTS node for QSPI support
There is a s25fs512s qspi flash on QDS, RDB and FRDM board.
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
commit ed9c51239461fe0322da2e93f50033ea0d05bc4f
Author: Chenhui Zhao <chenhui.zhao@nxp.com>
Date: Fri May 5 17:45:15 2017 +0800
arm64: dts: ls1012a: add ftm0 node
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 58 ++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 62 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 62 ++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 68 +++++++++++++++++++++-
4 files changed, 248 insertions(+), 2 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -13,6 +13,11 @@
model = "LS1012A Freedom Board";
compatible = "fsl,ls1012a-frdm", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -74,6 +79,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -81,3 +124,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -13,6 +13,11 @@
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -57,6 +62,10 @@
};
};
+&pcie {
+ status = "okay";
+};
+
&dspi {
bus-num = <0>;
status = "okay";
@@ -128,6 +137,44 @@
};
};
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x1>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x2>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x3>;
+ phy-mode = "sgmii-2500";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
&sai2 {
status = "okay";
};
@@ -135,3 +182,18 @@
&sata {
status = "okay";
};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -12,6 +12,15 @@
/ {
model = "LS1012A RDB Board";
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
+
+ aliases {
+ ethernet0 = &pfe_mac0;
+ ethernet1 = &pfe_mac1;
+ };
+};
+
+&pcie {
+ status = "okay";
};
&duart0 {
@@ -38,3 +47,56 @@
&sata {
status = "okay";
};
+
+&pfe {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* GEM_ID */
+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */
+ fsl,gemac-phy-id = <0x2>; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "sgmii";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x1>; /* enabled/disabled */
+ };
+ };
+
+ ethernet@1 {
+ compatible = "fsl,pfe-gemac-port";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* GEM_ID */
+ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */
+ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */
+ fsl,mdio-mux-val = <0x0>;
+ phy-mode = "rgmii-txid";
+ fsl,pfe-phy-if-flags = <0x0>;
+
+ mdio@0 {
+ reg = <0x0>; /* enabled/disabled */
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ qflash0: s25fs512s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+ spi-rx-bus-width = <2>;
+ spi-tx-bus-width = <2>;
+ };
+
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -260,7 +260,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1012a-dcfg",
"syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -317,13 +317,23 @@
#thermal-sensor-cells = <1>;
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ };
+
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1012a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 3>;
+ scl-gpios = <&gpio0 13 0>;
status = "disabled";
};
@@ -395,6 +405,20 @@
big-endian;
};
+ qspi: spi@1550000 {
+ compatible = "fsl,ls1012a-qspi", "fsl,ls1021a-qspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x1550000 0x0 0x10000>,
+ <0x0 0x40000000 0x0 0x10000000>;
+ reg-names = "QuadSPI", "QuadSPI-memory";
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "qspi_en", "qspi";
+ clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ big-endian;
+ status = "disabled";
+ };
+
sai1: sai@2b50000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -499,6 +523,46 @@
<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ rcpm: rcpm@1ee2000 {
+ compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1";
+ reg = <0x0 0x1ee2000 0x0 0x1000>;
+ fsl,#rcpm-wakeup-cells = <1>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ pfe_reserved: packetbuffer@83400000 {
+ reg = <0 0x83400000 0 0xc00000>;
+ };
+ };
+
+ pfe: pfe@04000000 {
+ compatible = "fsl,pfe";
+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */
+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */
+ reg-names = "pfe", "pfe-ddr";
+ fsl,pfe-num-interfaces = <0x2>;
+ interrupts = <0 172 0x4>, /* HIF interrupt */
+ <0 173 0x4>, /*HIF_NOCPY interrupt */
+ <0 174 0x4>; /* WoL interrupt */
+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol";
+ memory-region = <&pfe_reserved>;
+ fsl,pfe-scfg = <&scfg 0>;
+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>;
+ clocks = <&clockgen 4 0>;
+ clock-names = "pfe";
+
+ status = "okay";
+ pfe_mac0: ethernet@0 {
+ };
+
+ pfe_mac1: ethernet@1 {
+ };
};
firmware {