forked from openwrt/openwrt
/
205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
155 lines (128 loc) · 3.45 KB
/
205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
From 67face049c62cb37cf93da26b7fea037228d1d3d Mon Sep 17 00:00:00 2001
From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Thu, 15 Apr 2021 13:49:55 +0300
Subject: [PATCH 205/247] ARM: at91: pm: add support for waiting MCK1..4
SAMA7G5 has 5 master clocks 0..4. MCK0 is controlled differently than
MCK 1..4. MCK 1..4 should also be saved/restored in the last phase of
suspend/resume. Thus, adapt wait_mckrdy to support also MCK1..4.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210415105010.569620-10-claudiu.beznea@microchip.com
---
arch/arm/mach-at91/pm_suspend.S | 48 ++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 1f63bbfad728..7669b32d5257 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -22,11 +22,23 @@ tmp3 .req r6
/*
* Wait until master clock is ready (after switching master clock source)
+ *
+ * @r_mckid: register holding master clock identifier
+ *
+ * Side effects: overwrites r7, r8
*/
- .macro wait_mckrdy
-1: ldr tmp1, [pmc, #AT91_PMC_SR]
- tst tmp1, #AT91_PMC_MCKRDY
- beq 1b
+ .macro wait_mckrdy r_mckid
+#ifdef CONFIG_SOC_SAMA7
+ cmp \r_mckid, #0
+ beq 1f
+ mov r7, #AT91_PMC_MCKXRDY
+ b 2f
+#endif
+1: mov r7, #AT91_PMC_MCKRDY
+2: ldr r8, [pmc, #AT91_PMC_SR]
+ and r8, r7
+ cmp r8, r7
+ bne 2b
.endm
/*
@@ -231,7 +243,9 @@ sr_dis_exit:
bic tmp1, tmp1, #AT91_PMC_PRES
orr tmp1, tmp1, #AT91_PMC_PRES_64
str tmp1, [pmc, tmp3]
- wait_mckrdy
+
+ mov tmp3, #0
+ wait_mckrdy tmp3
b 1f
0:
@@ -267,10 +281,13 @@ sr_dis_exit:
bne 5f
/* Set lowest prescaler for fast resume. */
+ ldr tmp3, .mckr_offset
ldr tmp1, [pmc, tmp3]
bic tmp1, tmp1, #AT91_PMC_PRES
str tmp1, [pmc, tmp3]
- wait_mckrdy
+
+ mov tmp3, #0
+ wait_mckrdy tmp3
b 6f
5: /* Restore RC oscillator state */
@@ -307,6 +324,7 @@ sr_dis_exit:
.macro at91_pm_ulp1_mode
ldr pmc, .pmc_base
ldr tmp2, .mckr_offset
+ mov tmp3, #0
/* Save RC oscillator state and check if it is enabled. */
ldr tmp1, [pmc, #AT91_PMC_SR]
@@ -348,7 +366,7 @@ sr_dis_exit:
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
str tmp1, [pmc, tmp2]
- wait_mckrdy
+ wait_mckrdy tmp3
/* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
@@ -361,7 +379,7 @@ sr_dis_exit:
nop
nop
- wait_mckrdy
+ wait_mckrdy tmp3
/* Enable the crystal oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
@@ -377,7 +395,7 @@ sr_dis_exit:
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, tmp2]
- wait_mckrdy
+ wait_mckrdy tmp3
/* Switch main clock source to crystal oscillator */
ldr tmp1, [pmc, #AT91_CKGR_MOR]
@@ -394,7 +412,7 @@ sr_dis_exit:
orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
str tmp1, [pmc, tmp2]
- wait_mckrdy
+ wait_mckrdy tmp3
/* Restore RC oscillator state */
ldr tmp1, .saved_osc_status
@@ -573,10 +591,12 @@ sr_dis_exit:
save_mck:
str tmp1, [pmc, tmp2]
- wait_mckrdy
+ mov tmp3, #0
+ wait_mckrdy tmp3
at91_plla_disable
+ ldr tmp3, .pm_mode
cmp tmp3, #AT91_PM_ULP1
beq ulp1_mode
@@ -599,7 +619,8 @@ ulp_exit:
ldr tmp2, .saved_mckr
str tmp2, [pmc, tmp1]
- wait_mckrdy
+ mov tmp3, #0
+ wait_mckrdy tmp3
.endm
@@ -611,7 +632,8 @@ ulp_exit:
bic tmp1, tmp1, #AT91_PMC_CSS
str tmp1, [pmc, tmp2]
- wait_mckrdy
+ mov tmp3, #0
+ wait_mckrdy tmp3
/*BUMEN*/
ldr r0, .sfrbu
--
2.32.0