forked from openwrt/openwrt
/
749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
151 lines (138 loc) · 5.54 KB
/
749-v5.16-net-dsa-qca8k-tidy-for-loop-in-setup-and-add-cpu-port-c.patch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
From 040e926f5813a5f4cc18dbff7c942d1e52f368f2 Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Tue, 19 Oct 2021 02:08:50 +0200
Subject: net: dsa: qca8k: tidy for loop in setup and add cpu port check
Tidy and organize qca8k setup function from multiple for loop.
Change for loop in bridge leave/join to scan all port and skip cpu port.
No functional change intended.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/qca8k.c | 74 +++++++++++++++++++++++++++++--------------------
1 file changed, 44 insertions(+), 30 deletions(-)
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1122,28 +1122,34 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
dev_warn(priv->dev, "mib init failed");
- /* Enable QCA header mode on the cpu port */
- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port),
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
- QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
- if (ret) {
- dev_err(priv->dev, "failed enabling QCA header mode");
- return ret;
- }
-
- /* Disable forwarding by default on all ports */
+ /* Initial setup of all ports */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, 0);
if (ret)
return ret;
- }
- /* Disable MAC by default on all ports */
- for (i = 1; i < QCA8K_NUM_PORTS; i++)
- qca8k_port_set_status(priv, i, 0);
+ /* Enable QCA header mode on all cpu ports */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
+ }
+
+ /* Disable MAC by default on all user ports */
+ if (dsa_is_user_port(ds, i))
+ qca8k_port_set_status(priv, i, 0);
+ }
- /* Forward all unknown frames to CPU port for Linux processing */
+ /* Forward all unknown frames to CPU port for Linux processing
+ * Notice that in multi-cpu config only one port should be set
+ * for igmp, unknown, multicast and broadcast packet
+ */
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
@@ -1152,11 +1158,13 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Setup connection between CPU port & user ports */
+ /* Setup connection between CPU port & user ports
+ * Configure specific switch configuration for ports
+ */
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
/* CPU port gets connected to all user ports of the switch */
if (dsa_is_cpu_port(ds, i)) {
- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port),
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
if (ret)
return ret;
@@ -1193,16 +1201,14 @@ qca8k_setup(struct dsa_switch *ds)
if (ret)
return ret;
}
- }
- /* The port 5 of the qca8337 have some problem in flood condition. The
- * original legacy driver had some specific buffer and priority settings
- * for the different port suggested by the QCA switch team. Add this
- * missing settings to improve switch stability under load condition.
- * This problem is limited to qca8337 and other qca8k switch are not affected.
- */
- if (priv->switch_id == QCA8K_ID_QCA8337) {
- for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337) {
switch (i) {
/* The 2 CPU port and port 5 requires some different
* priority than any other ports.
@@ -1238,6 +1244,12 @@ qca8k_setup(struct dsa_switch *ds)
QCA8K_PORT_HOL_CTRL1_WRED_EN,
mask);
}
+
+ /* Set initial MTU for every port.
+ * We have only have a general MTU setting. So track
+ * every port and set the max across all port.
+ */
+ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
}
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
@@ -1251,8 +1263,6 @@ qca8k_setup(struct dsa_switch *ds)
}
/* Setup our port MTUs to match power on defaults */
- for (i = 0; i < QCA8K_NUM_PORTS; i++)
- priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
if (ret)
dev_warn(priv->dev, "failed setting MTU settings");
@@ -1728,7 +1738,9 @@ qca8k_port_bridge_join(struct dsa_switch
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
port_mask = BIT(cpu_port);
- for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
/* Add this port to the portvlan mask of the other ports
@@ -1758,7 +1770,9 @@ qca8k_port_bridge_leave(struct dsa_switc
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
- for (i = 1; i < QCA8K_NUM_PORTS; i++) {
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
if (dsa_to_port(ds, i)->bridge_dev != br)
continue;
/* Remove this port to the portvlan mask of the other ports