forked from openwrt/openwrt
/
dsa.c
2218 lines (1838 loc) · 61.1 KB
/
dsa.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
// SPDX-License-Identifier: GPL-2.0-only
#include <net/dsa.h>
#include <linux/if_bridge.h>
#include <asm/mach-rtl838x/mach-rtl83xx.h>
#include "rtl83xx.h"
extern struct rtl83xx_soc_info soc_info;
static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv)
{
mutex_lock(&priv->reg_mutex);
/* Enable statistics module: all counters plus debug.
* On RTL839x all counters are enabled by default
*/
if (priv->family_id == RTL8380_FAMILY_ID)
sw_w32_mask(0, 3, RTL838X_STAT_CTRL);
/* Reset statistics counters */
sw_w32_mask(0, 1, priv->r->stat_rst);
mutex_unlock(&priv->reg_mutex);
}
static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv)
{
int i;
u64 v = 0;
msleep(1000);
/* Enable all ports with a PHY, including the SFP-ports */
for (i = 0; i < priv->cpu_port; i++) {
if (priv->ports[i].phy)
v |= BIT_ULL(i);
}
pr_info("%s: %16llx\n", __func__, v);
priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl);
/* PHY update complete, there is no global PHY polling enable bit on the 9300 */
if (priv->family_id == RTL8390_FAMILY_ID)
sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL);
else if(priv->family_id == RTL9300_FAMILY_ID)
sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL);
}
const struct rtl83xx_mib_desc rtl83xx_mib[] = {
MIB_DESC(2, 0xf8, "ifInOctets"),
MIB_DESC(2, 0xf0, "ifOutOctets"),
MIB_DESC(1, 0xec, "dot1dTpPortInDiscards"),
MIB_DESC(1, 0xe8, "ifInUcastPkts"),
MIB_DESC(1, 0xe4, "ifInMulticastPkts"),
MIB_DESC(1, 0xe0, "ifInBroadcastPkts"),
MIB_DESC(1, 0xdc, "ifOutUcastPkts"),
MIB_DESC(1, 0xd8, "ifOutMulticastPkts"),
MIB_DESC(1, 0xd4, "ifOutBroadcastPkts"),
MIB_DESC(1, 0xd0, "ifOutDiscards"),
MIB_DESC(1, 0xcc, ".3SingleCollisionFrames"),
MIB_DESC(1, 0xc8, ".3MultipleCollisionFrames"),
MIB_DESC(1, 0xc4, ".3DeferredTransmissions"),
MIB_DESC(1, 0xc0, ".3LateCollisions"),
MIB_DESC(1, 0xbc, ".3ExcessiveCollisions"),
MIB_DESC(1, 0xb8, ".3SymbolErrors"),
MIB_DESC(1, 0xb4, ".3ControlInUnknownOpcodes"),
MIB_DESC(1, 0xb0, ".3InPauseFrames"),
MIB_DESC(1, 0xac, ".3OutPauseFrames"),
MIB_DESC(1, 0xa8, "DropEvents"),
MIB_DESC(1, 0xa4, "tx_BroadcastPkts"),
MIB_DESC(1, 0xa0, "tx_MulticastPkts"),
MIB_DESC(1, 0x9c, "CRCAlignErrors"),
MIB_DESC(1, 0x98, "tx_UndersizePkts"),
MIB_DESC(1, 0x94, "rx_UndersizePkts"),
MIB_DESC(1, 0x90, "rx_UndersizedropPkts"),
MIB_DESC(1, 0x8c, "tx_OversizePkts"),
MIB_DESC(1, 0x88, "rx_OversizePkts"),
MIB_DESC(1, 0x84, "Fragments"),
MIB_DESC(1, 0x80, "Jabbers"),
MIB_DESC(1, 0x7c, "Collisions"),
MIB_DESC(1, 0x78, "tx_Pkts64Octets"),
MIB_DESC(1, 0x74, "rx_Pkts64Octets"),
MIB_DESC(1, 0x70, "tx_Pkts65to127Octets"),
MIB_DESC(1, 0x6c, "rx_Pkts65to127Octets"),
MIB_DESC(1, 0x68, "tx_Pkts128to255Octets"),
MIB_DESC(1, 0x64, "rx_Pkts128to255Octets"),
MIB_DESC(1, 0x60, "tx_Pkts256to511Octets"),
MIB_DESC(1, 0x5c, "rx_Pkts256to511Octets"),
MIB_DESC(1, 0x58, "tx_Pkts512to1023Octets"),
MIB_DESC(1, 0x54, "rx_Pkts512to1023Octets"),
MIB_DESC(1, 0x50, "tx_Pkts1024to1518Octets"),
MIB_DESC(1, 0x4c, "rx_StatsPkts1024to1518Octets"),
MIB_DESC(1, 0x48, "tx_Pkts1519toMaxOctets"),
MIB_DESC(1, 0x44, "rx_Pkts1519toMaxOctets"),
MIB_DESC(1, 0x40, "rxMacDiscards")
};
/* DSA callbacks */
static enum dsa_tag_protocol rtl83xx_get_tag_protocol(struct dsa_switch *ds,
int port,
enum dsa_tag_protocol mprot)
{
/* The switch does not tag the frames, instead internally the header
* structure for each packet is tagged accordingly.
*/
return DSA_TAG_PROTO_TRAILER;
}
/*
* Initialize all VLANS
*/
static void rtl83xx_vlan_setup(struct rtl838x_switch_priv *priv)
{
struct rtl838x_vlan_info info;
int i;
pr_info("In %s\n", __func__);
priv->r->vlan_profile_setup(0);
priv->r->vlan_profile_setup(1);
pr_info("UNKNOWN_MC_PMASK: %016llx\n", priv->r->read_mcast_pmask(UNKNOWN_MC_PMASK));
priv->r->vlan_profile_dump(0);
info.fid = 0; // Default Forwarding ID / MSTI
info.hash_uc_fid = false; // Do not build the L2 lookup hash with FID, but VID
info.hash_mc_fid = false; // Do the same for Multicast packets
info.profile_id = 0; // Use default Vlan Profile 0
info.tagged_ports = 0; // Initially no port members
if (priv->family_id == RTL9310_FAMILY_ID) {
info.if_id = 0;
info.multicast_grp_mask = 0;
info.l2_tunnel_list_id = -1;
}
// Initialize all vlans 0-4095
for (i = 0; i < MAX_VLANS; i ++)
priv->r->vlan_set_tagged(i, &info);
// reset PVIDs; defaults to 1 on reset
for (i = 0; i <= priv->ds->num_ports; i++) {
priv->r->vlan_port_pvid_set(i, PBVLAN_TYPE_INNER, 0);
priv->r->vlan_port_pvid_set(i, PBVLAN_TYPE_OUTER, 0);
priv->r->vlan_port_pvidmode_set(i, PBVLAN_TYPE_INNER, PBVLAN_MODE_UNTAG_AND_PRITAG);
priv->r->vlan_port_pvidmode_set(i, PBVLAN_TYPE_OUTER, PBVLAN_MODE_UNTAG_AND_PRITAG);
}
// Set forwarding action based on inner VLAN tag
for (i = 0; i < priv->cpu_port; i++)
priv->r->vlan_fwd_on_inner(i, true);
}
static int rtl83xx_setup(struct dsa_switch *ds)
{
int i;
struct rtl838x_switch_priv *priv = ds->priv;
u64 port_bitmap = BIT_ULL(priv->cpu_port);
pr_debug("%s called\n", __func__);
/* Disable MAC polling the PHY so that we can start configuration */
priv->r->set_port_reg_le(0ULL, priv->r->smi_poll_ctrl);
for (i = 0; i < ds->num_ports; i++)
priv->ports[i].enable = false;
priv->ports[priv->cpu_port].enable = true;
/* Isolate ports from each other: traffic only CPU <-> port */
/* Setting bit j in register RTL838X_PORT_ISO_CTRL(i) allows
* traffic from source port i to destination port j
*/
for (i = 0; i < priv->cpu_port; i++) {
if (priv->ports[i].phy) {
priv->r->set_port_reg_be(BIT_ULL(priv->cpu_port) | BIT_ULL(i),
priv->r->port_iso_ctrl(i));
port_bitmap |= BIT_ULL(i);
}
}
priv->r->set_port_reg_be(port_bitmap, priv->r->port_iso_ctrl(priv->cpu_port));
if (priv->family_id == RTL8380_FAMILY_ID)
rtl838x_print_matrix();
else
rtl839x_print_matrix();
rtl83xx_init_stats(priv);
rtl83xx_vlan_setup(priv);
ds->configure_vlan_while_not_filtering = true;
priv->r->l2_learning_setup();
/* Enable MAC Polling PHY again */
rtl83xx_enable_phy_polling(priv);
pr_debug("Please wait until PHY is settled\n");
msleep(1000);
priv->r->pie_init(priv);
return 0;
}
static int rtl93xx_setup(struct dsa_switch *ds)
{
int i;
struct rtl838x_switch_priv *priv = ds->priv;
u32 port_bitmap = BIT(priv->cpu_port);
pr_info("%s called\n", __func__);
/* Disable MAC polling the PHY so that we can start configuration */
if (priv->family_id == RTL9300_FAMILY_ID)
sw_w32(0, RTL930X_SMI_POLL_CTRL);
if (priv->family_id == RTL9310_FAMILY_ID) {
sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL);
sw_w32(0, RTL931X_SMI_PORT_POLLING_CTRL + 4);
}
// Disable all ports except CPU port
for (i = 0; i < ds->num_ports; i++)
priv->ports[i].enable = false;
priv->ports[priv->cpu_port].enable = true;
for (i = 0; i < priv->cpu_port; i++) {
if (priv->ports[i].phy) {
priv->r->traffic_set(i, BIT_ULL(priv->cpu_port) | BIT_ULL(i));
port_bitmap |= BIT_ULL(i);
}
}
priv->r->traffic_set(priv->cpu_port, port_bitmap);
rtl930x_print_matrix();
// TODO: Initialize statistics
rtl83xx_vlan_setup(priv);
ds->configure_vlan_while_not_filtering = true;
priv->r->l2_learning_setup();
rtl83xx_enable_phy_polling(priv);
priv->r->pie_init(priv);
return 0;
}
static int rtl93xx_get_sds(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct device_node *dn;
u32 sds_num;
if (!dev)
return -1;
if (dev->of_node) {
dn = dev->of_node;
if (of_property_read_u32(dn, "sds", &sds_num))
sds_num = -1;
} else {
dev_err(dev, "No DT node.\n");
return -1;
}
return sds_num;
}
static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
pr_debug("In %s port %d, state is %d", __func__, port, state->interface);
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_1000BASEX &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII &&
state->interface != PHY_INTERFACE_MODE_GMII &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_INTERNAL &&
state->interface != PHY_INTERFACE_MODE_SGMII) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
dev_err(ds->dev,
"Unsupported interface: %d for port %d\n",
state->interface, port);
return;
}
/* Allow all the expected bits */
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
/* With the exclusion of MII and Reverse MII, we support Gigabit,
* including Half duplex
*/
if (state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII) {
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseT_Half);
}
/* On both the 8380 and 8382, ports 24-27 are SFP ports */
if (port >= 24 && port <= 27 && priv->family_id == RTL8380_FAMILY_ID)
phylink_set(mask, 1000baseX_Full);
/* On the RTL839x family of SoCs, ports 48 to 51 are SFP ports */
if (port >= 48 && port <= 51 && priv->family_id == RTL8390_FAMILY_ID)
phylink_set(mask, 1000baseX_Full);
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
bitmap_and(supported, supported, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
}
static void rtl93xx_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
pr_debug("In %s port %d, state is %d (%s)", __func__, port, state->interface,
phy_modes(state->interface));
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_NA &&
state->interface != PHY_INTERFACE_MODE_1000BASEX &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII &&
state->interface != PHY_INTERFACE_MODE_GMII &&
state->interface != PHY_INTERFACE_MODE_QSGMII &&
state->interface != PHY_INTERFACE_MODE_XGMII &&
state->interface != PHY_INTERFACE_MODE_HSGMII &&
state->interface != PHY_INTERFACE_MODE_10GBASER &&
state->interface != PHY_INTERFACE_MODE_10GKR &&
state->interface != PHY_INTERFACE_MODE_USXGMII &&
state->interface != PHY_INTERFACE_MODE_INTERNAL &&
state->interface != PHY_INTERFACE_MODE_SGMII) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
dev_err(ds->dev,
"Unsupported interface: %d for port %d\n",
state->interface, port);
return;
}
/* Allow all the expected bits */
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
phylink_set(mask, Pause);
phylink_set(mask, Asym_Pause);
/* With the exclusion of MII and Reverse MII, we support Gigabit,
* including Half duplex
*/
if (state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII) {
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 1000baseT_Half);
}
// Internal phys of the RTL93xx family provide 10G
if (priv->ports[port].phy_is_integrated
&& state->interface == PHY_INTERFACE_MODE_1000BASEX) {
phylink_set(mask, 1000baseX_Full);
} else if (priv->ports[port].phy_is_integrated) {
phylink_set(mask, 1000baseX_Full);
phylink_set(mask, 10000baseKR_Full);
phylink_set(mask, 10000baseSR_Full);
phylink_set(mask, 10000baseCR_Full);
}
if (state->interface == PHY_INTERFACE_MODE_INTERNAL) {
phylink_set(mask, 1000baseX_Full);
phylink_set(mask, 1000baseT_Full);
phylink_set(mask, 10000baseKR_Full);
phylink_set(mask, 10000baseT_Full);
phylink_set(mask, 10000baseSR_Full);
phylink_set(mask, 10000baseCR_Full);
}
if (state->interface == PHY_INTERFACE_MODE_USXGMII)
phylink_set(mask, 10000baseT_Full);
phylink_set(mask, 10baseT_Half);
phylink_set(mask, 10baseT_Full);
phylink_set(mask, 100baseT_Half);
phylink_set(mask, 100baseT_Full);
bitmap_and(supported, supported, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_and(state->advertising, state->advertising, mask,
__ETHTOOL_LINK_MODE_MASK_NBITS);
pr_debug("%s leaving supported: %*pb", __func__, __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
}
static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
u64 speed;
u64 link;
if (port < 0 || port > priv->cpu_port)
return -EINVAL;
state->link = 0;
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
if (link & BIT_ULL(port))
state->link = 1;
pr_debug("%s: link state port %d: %llx\n", __func__, port, link & BIT_ULL(port));
state->duplex = 0;
if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
state->duplex = 1;
speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
speed >>= (port % 16) << 1;
switch (speed & 0x3) {
case 0:
state->speed = SPEED_10;
break;
case 1:
state->speed = SPEED_100;
break;
case 2:
state->speed = SPEED_1000;
break;
case 3:
if (priv->family_id == RTL9300_FAMILY_ID
&& (port == 24 || port == 26)) /* Internal serdes */
state->speed = SPEED_2500;
else
state->speed = SPEED_100; /* Is in fact 500Mbit */
}
state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
state->pause |= MLO_PAUSE_RX;
if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
state->pause |= MLO_PAUSE_TX;
return 1;
}
static int rtl93xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
u64 speed;
u64 link;
if (port < 0 || port > priv->cpu_port)
return -EINVAL;
/*
* On the RTL9300 for at least the RTL8226B PHY, the MAC-side link
* state needs to be read twice in order to read a correct result.
* This would not be necessary for ports connected e.g. to RTL8218D
* PHYs.
*/
state->link = 0;
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
if (link & BIT_ULL(port))
state->link = 1;
pr_debug("%s: link state port %d: %llx, media %08x\n", __func__, port,
link & BIT_ULL(port), sw_r32(RTL930X_MAC_LINK_MEDIA_STS));
state->duplex = 0;
if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
state->duplex = 1;
speed = priv->r->get_port_reg_le(priv->r->mac_link_spd_sts(port));
speed >>= (port % 8) << 2;
switch (speed & 0xf) {
case 0:
state->speed = SPEED_10;
break;
case 1:
state->speed = SPEED_100;
break;
case 2:
case 7:
state->speed = SPEED_1000;
break;
case 4:
state->speed = SPEED_10000;
break;
case 5:
case 8:
state->speed = SPEED_2500;
break;
case 6:
state->speed = SPEED_5000;
break;
default:
pr_err("%s: unknown speed: %d\n", __func__, (u32)speed & 0xf);
}
if (priv->family_id == RTL9310_FAMILY_ID
&& (port >= 52 || port <= 55)) { /* Internal serdes */
state->speed = SPEED_10000;
state->link = 1;
state->duplex = 1;
}
pr_debug("%s: speed is: %d %d\n", __func__, (u32)speed & 0xf, state->speed);
state->pause &= (MLO_PAUSE_RX | MLO_PAUSE_TX);
if (priv->r->get_port_reg_le(priv->r->mac_rx_pause_sts) & BIT_ULL(port))
state->pause |= MLO_PAUSE_RX;
if (priv->r->get_port_reg_le(priv->r->mac_tx_pause_sts) & BIT_ULL(port))
state->pause |= MLO_PAUSE_TX;
return 1;
}
static void rtl83xx_config_interface(int port, phy_interface_t interface)
{
u32 old, int_shift, sds_shift;
switch (port) {
case 24:
int_shift = 0;
sds_shift = 5;
break;
case 26:
int_shift = 3;
sds_shift = 0;
break;
default:
return;
}
old = sw_r32(RTL838X_SDS_MODE_SEL);
switch (interface) {
case PHY_INTERFACE_MODE_1000BASEX:
if ((old >> sds_shift & 0x1f) == 4)
return;
sw_w32_mask(0x7 << int_shift, 1 << int_shift, RTL838X_INT_MODE_CTRL);
sw_w32_mask(0x1f << sds_shift, 4 << sds_shift, RTL838X_SDS_MODE_SEL);
break;
case PHY_INTERFACE_MODE_SGMII:
if ((old >> sds_shift & 0x1f) == 2)
return;
sw_w32_mask(0x7 << int_shift, 2 << int_shift, RTL838X_INT_MODE_CTRL);
sw_w32_mask(0x1f << sds_shift, 2 << sds_shift, RTL838X_SDS_MODE_SEL);
break;
default:
return;
}
pr_debug("configured port %d for interface %s\n", port, phy_modes(interface));
}
static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
u32 reg;
int speed_bit = priv->family_id == RTL8380_FAMILY_ID ? 4 : 3;
pr_debug("%s port %d, mode %x\n", __func__, port, mode);
if (port == priv->cpu_port) {
/* Set Speed, duplex, flow control
* FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
* | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN
* | MEDIA_SEL
*/
if (priv->family_id == RTL8380_FAMILY_ID) {
sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port));
/* allow CRC errors on CPU-port */
sw_w32_mask(0, 0x8, RTL838X_MAC_PORT_CTRL(priv->cpu_port));
} else {
sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port));
}
return;
}
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
/* Auto-Negotiation does not work for MAC in RTL8390 */
if (priv->family_id == RTL8380_FAMILY_ID) {
if (mode == MLO_AN_PHY || phylink_autoneg_inband(mode)) {
pr_debug("PHY autonegotiates\n");
reg |= RTL838X_NWAY_EN;
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
rtl83xx_config_interface(port, state->interface);
return;
}
}
if (mode != MLO_AN_FIXED)
pr_debug("Fixed state.\n");
/* Clear id_mode_dis bit, and the existing port mode, let
* RGMII_MODE_EN bet set by mac_link_{up,down} */
if (priv->family_id == RTL8380_FAMILY_ID) {
reg &= ~(RTL838X_RX_PAUSE_EN | RTL838X_TX_PAUSE_EN);
if (state->pause & MLO_PAUSE_TXRX_MASK) {
if (state->pause & MLO_PAUSE_TX)
reg |= RTL838X_TX_PAUSE_EN;
reg |= RTL838X_RX_PAUSE_EN;
}
} else if (priv->family_id == RTL8390_FAMILY_ID) {
reg &= ~(RTL839X_RX_PAUSE_EN | RTL839X_TX_PAUSE_EN);
if (state->pause & MLO_PAUSE_TXRX_MASK) {
if (state->pause & MLO_PAUSE_TX)
reg |= RTL839X_TX_PAUSE_EN;
reg |= RTL839X_RX_PAUSE_EN;
}
}
reg &= ~(3 << speed_bit);
switch (state->speed) {
case SPEED_1000:
reg |= 2 << speed_bit;
break;
case SPEED_100:
reg |= 1 << speed_bit;
break;
default:
break; // Ignore, including 10MBit which has a speed value of 0
}
if (priv->family_id == RTL8380_FAMILY_ID) {
reg &= ~(RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN);
if (state->link)
reg |= RTL838X_FORCE_LINK_EN;
if (state->duplex == RTL838X_DUPLEX_MODE)
reg |= RTL838X_DUPLEX_MODE;
} else if (priv->family_id == RTL8390_FAMILY_ID) {
reg &= ~(RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN);
if (state->link)
reg |= RTL839X_FORCE_LINK_EN;
if (state->duplex == RTL839X_DUPLEX_MODE)
reg |= RTL839X_DUPLEX_MODE;
}
// LAG members must use DUPLEX and we need to enable the link
if (priv->lagmembers & BIT_ULL(port)) {
switch(priv->family_id) {
case RTL8380_FAMILY_ID:
reg |= (RTL838X_DUPLEX_MODE | RTL838X_FORCE_LINK_EN);
break;
case RTL8390_FAMILY_ID:
reg |= (RTL839X_DUPLEX_MODE | RTL839X_FORCE_LINK_EN);
break;
}
}
// Disable AN
if (priv->family_id == RTL8380_FAMILY_ID)
reg &= ~RTL838X_NWAY_EN;
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
}
static void rtl931x_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
int sds_num;
u32 reg, band;
sds_num = priv->ports[port].sds_num;
pr_info("%s: speed %d sds_num %d\n", __func__, state->speed, sds_num);
switch (state->interface) {
case PHY_INTERFACE_MODE_HSGMII:
pr_info("%s setting mode PHY_INTERFACE_MODE_HSGMII\n", __func__);
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_HSGMII);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_HSGMII);
band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_HSGMII);
break;
case PHY_INTERFACE_MODE_1000BASEX:
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_1000BASEX);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_1000BASEX);
break;
case PHY_INTERFACE_MODE_XGMII:
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_XGMII);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_XGMII);
break;
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_10GKR:
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_10GBASER);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_10GBASER);
break;
case PHY_INTERFACE_MODE_USXGMII:
// Translates to MII_USXGMII_10GSXGMII
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_USXGMII);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_USXGMII);
break;
case PHY_INTERFACE_MODE_SGMII:
pr_info("%s setting mode PHY_INTERFACE_MODE_SGMII\n", __func__);
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_SGMII);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_SGMII);
band = rtl931x_sds_cmu_band_set(sds_num, true, 62, PHY_INTERFACE_MODE_SGMII);
break;
case PHY_INTERFACE_MODE_QSGMII:
band = rtl931x_sds_cmu_band_get(sds_num, PHY_INTERFACE_MODE_QSGMII);
rtl931x_sds_init(sds_num, PHY_INTERFACE_MODE_QSGMII);
break;
default:
pr_err("%s: unknown serdes mode: %s\n",
__func__, phy_modes(state->interface));
return;
}
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
pr_info("%s reading FORCE_MODE_CTRL: %08x\n", __func__, reg);
reg &= ~(RTL931X_DUPLEX_MODE | RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN);
reg &= ~(0xf << 12);
reg |= 0x2 << 12; // Set SMI speed to 0x2
reg |= RTL931X_TX_PAUSE_EN | RTL931X_RX_PAUSE_EN;
if (priv->lagmembers & BIT_ULL(port))
reg |= RTL931X_DUPLEX_MODE;
if (state->duplex == DUPLEX_FULL)
reg |= RTL931X_DUPLEX_MODE;
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
}
static void rtl93xx_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
{
struct rtl838x_switch_priv *priv = ds->priv;
int sds_num, sds_mode;
u32 reg;
pr_info("%s port %d, mode %x, phy-mode: %s, speed %d, link %d\n", __func__,
port, mode, phy_modes(state->interface), state->speed, state->link);
// Nothing to be done for the CPU-port
if (port == priv->cpu_port)
return;
if (priv->family_id == RTL9310_FAMILY_ID)
return rtl931x_phylink_mac_config(ds, port, mode, state);
sds_num = priv->ports[port].sds_num;
pr_info("%s SDS is %d\n", __func__, sds_num);
if (sds_num >= 0) {
switch (state->interface) {
case PHY_INTERFACE_MODE_HSGMII:
sds_mode = 0x12;
break;
case PHY_INTERFACE_MODE_1000BASEX:
sds_mode = 0x04;
break;
case PHY_INTERFACE_MODE_XGMII:
sds_mode = 0x10;
break;
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_10GKR:
sds_mode = 0x1b; // 10G 1000X Auto
break;
case PHY_INTERFACE_MODE_USXGMII:
sds_mode = 0x0d;
break;
default:
pr_err("%s: unknown serdes mode: %s\n",
__func__, phy_modes(state->interface));
return;
}
rtl9300_sds_rst(sds_num, sds_mode);
}
reg = sw_r32(priv->r->mac_force_mode_ctrl(port));
reg &= ~(0xf << 3);
switch (state->speed) {
case SPEED_10000:
reg |= 4 << 3;
break;
case SPEED_5000:
reg |= 6 << 3;
break;
case SPEED_2500:
reg |= 5 << 3;
break;
case SPEED_1000:
reg |= 2 << 3;
break;
default:
reg |= 2 << 3;
break;
}
if (state->link)
reg |= RTL930X_FORCE_LINK_EN;
if (priv->lagmembers & BIT_ULL(port))
reg |= RTL930X_DUPLEX_MODE | RTL930X_FORCE_LINK_EN;
if (state->duplex == DUPLEX_FULL)
reg |= RTL930X_DUPLEX_MODE;
if (priv->ports[port].phy_is_integrated)
reg &= ~RTL930X_FORCE_EN; // Clear MAC_FORCE_EN to allow SDS-MAC link
else
reg |= RTL930X_FORCE_EN;
sw_w32(reg, priv->r->mac_force_mode_ctrl(port));
}
static void rtl83xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface)
{
struct rtl838x_switch_priv *priv = ds->priv;
u32 v;
/* Stop TX/RX to port */
sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
// No longer force link
if (priv->family_id == RTL9300_FAMILY_ID)
v = RTL930X_FORCE_EN | RTL930X_FORCE_LINK_EN;
else if (priv->family_id == RTL9310_FAMILY_ID)
v = RTL931X_FORCE_EN | RTL931X_FORCE_LINK_EN;
sw_w32_mask(v, 0, priv->r->mac_port_ctrl(port));
}
static void rtl93xx_phylink_mac_link_down(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface)
{
struct rtl838x_switch_priv *priv = ds->priv;
/* Stop TX/RX to port */
sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(port));
// No longer force link
sw_w32_mask(3, 0, priv->r->mac_force_mode_ctrl(port));
}
static void rtl83xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
struct rtl838x_switch_priv *priv = ds->priv;
/* Restart TX/RX to port */
sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
// TODO: Set speed/duplex/pauses
}
static void rtl93xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
struct rtl838x_switch_priv *priv = ds->priv;
/* Restart TX/RX to port */
sw_w32_mask(0, 0x3, priv->r->mac_port_ctrl(port));
// TODO: Set speed/duplex/pauses
}
static void rtl83xx_get_strings(struct dsa_switch *ds,
int port, u32 stringset, u8 *data)
{
int i;
if (stringset != ETH_SS_STATS)
return;
for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++)
strncpy(data + i * ETH_GSTRING_LEN, rtl83xx_mib[i].name,
ETH_GSTRING_LEN);
}
static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port,
uint64_t *data)
{
struct rtl838x_switch_priv *priv = ds->priv;
const struct rtl83xx_mib_desc *mib;
int i;
u64 h;
for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) {
mib = &rtl83xx_mib[i];
data[i] = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 252 - mib->offset);
if (mib->size == 2) {
h = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 248 - mib->offset);
data[i] |= h << 32;
}
}
}
static int rtl83xx_get_sset_count(struct dsa_switch *ds, int port, int sset)
{
if (sset != ETH_SS_STATS)
return 0;
return ARRAY_SIZE(rtl83xx_mib);
}
static int rtl83xx_port_enable(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct rtl838x_switch_priv *priv = ds->priv;
u64 v;
pr_debug("%s: %x %d", __func__, (u32) priv, port);
priv->ports[port].enable = true;
/* enable inner tagging on egress, do not keep any tags */
if (priv->family_id == RTL9310_FAMILY_ID)
sw_w32(BIT(4), priv->r->vlan_port_tag_sts_ctrl + (port << 2));
else
sw_w32(1, priv->r->vlan_port_tag_sts_ctrl + (port << 2));
if (dsa_is_cpu_port(ds, port))
return 0;
/* add port to switch mask of CPU_PORT */
priv->r->traffic_enable(priv->cpu_port, port);
if (priv->is_lagmember[port]) {
pr_debug("%s: %d is lag slave. ignore\n", __func__, port);
return 0;
}
/* add all other ports in the same bridge to switch mask of port */
v = priv->r->traffic_get(port);
v |= priv->ports[port].pm;
priv->r->traffic_set(port, v);
// TODO: Figure out if this is necessary
if (priv->family_id == RTL9300_FAMILY_ID) {
sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_SABLK_CTRL);
sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_DABLK_CTRL);
}
priv->ports[port].sds_num = rtl93xx_get_sds(phydev);
return 0;
}
static void rtl83xx_port_disable(struct dsa_switch *ds, int port)
{
struct rtl838x_switch_priv *priv = ds->priv;
u64 v;
pr_debug("%s %x: %d", __func__, (u32)priv, port);
/* you can only disable user ports */
if (!dsa_is_user_port(ds, port))
return;
// BUG: This does not work on RTL931X
/* remove port from switch mask of CPU_PORT */
priv->r->traffic_disable(priv->cpu_port, port);
/* remove all other ports in the same bridge from switch mask of port */
v = priv->r->traffic_get(port);
v &= ~priv->ports[port].pm;
priv->r->traffic_set(port, v);
priv->ports[port].enable = false;
}
static int rtl83xx_set_mac_eee(struct dsa_switch *ds, int port,
struct ethtool_eee *e)
{
struct rtl838x_switch_priv *priv = ds->priv;
if (e->eee_enabled && !priv->eee_enabled) {
pr_info("Globally enabling EEE\n");
priv->r->init_eee(priv, true);
}
priv->r->port_eee_set(priv, port, e->eee_enabled);