sequins channel B constantly runs, even without trigger inputs.

[mtallen]

I've tested this on 2 O+C's, with the same behavior.

repro steps:

1. Add clock input to TR1
2. Create a sequence for output A
3. Create 4 sequences for output B (may work with less have checked, this was my setup last night)
4. Set playmode for output B to SEQ+1 - SEQ+3
5. Set output B to respond to Clock TR1
6. Start clock into the OC
7. Stop clock

When I do this output A will stop but output B continues on indefinitely. If you need more testing on this let me know.

[mxmxmx]

Hi

I suspect you have set the channel B multiplier (mult/div) to some value > 1 ?

[mtallen]

You are 100% correct in your suspicion. Totally forgot about that setting being different.

[mxmxmx]

i see. that's an artefact of the multiplier stuff (= internal timer). it can be (mostly) hacked away though (see corresponding temps utile code.) i'll see to moving that over for the next firmware release

[mtallen]

Thanks! Ill take a look at the temps code. Ive been meaning to try and set up an environment to get the OC stuff to compile locally. This is as good excuse as any.

[nagruv]

Hello friends,
I am currently experiencing the same problem on the (OCP) VOR version.
Do you know how to solve the problem ?

[jmsiener]

@nagruv you should probably contact Plum Audio directly. @Shayshez