MySensors GatewayW5100 example sketch do not compile with ATmega128 board

[lwaga]

The same output gives boards with ATMega64, 128, 640, 1281, 2561.

>Executing task in folder home_light_automation: C:\.platformio\penv\Scripts\platformio.exe run

Processing ATmega128 (platform: atmelavr; board: ATmega128; framework: arduino)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/atmelavr/ATmega128.html
PLATFORM: Atmel AVR 2.0.0 > ATmega128/A
HARDWARE: ATMEGA128 16MHz, 4KB RAM, 127KB Flash
PACKAGES:
 - framework-arduino-avr-megacore 2.0.2
 - toolchain-atmelavr 1.50400.190710 (5.4.0)
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 14 compatible libraries
Scanning dependencies...
Dependency Graph
|-- <Ethernet> 2.0.0
|   |-- <SPI> 1.0
|-- <MySensors> 2.3.1
|   |-- <Wire> 1.0
|   |-- <SPI> 1.0
|   |-- <EEPROM> 2.0
Building in release mode
Compiling .pio\build\ATmega128\src\main.cpp.o
Compiling .pio\build\ATmega128\lib475\SPI\SPI.cpp.o
Compiling .pio\build\ATmega128\lib134\Ethernet-2.0.0\Dhcp.cpp.o
Compiling .pio\build\ATmega128\lib134\Ethernet-2.0.0\Dns.cpp.o
In file included from C:\.platformio\packages\framework-arduino-avr-megacore\cores\MegaCore/Arduino.h:30:0,
                 from lib\Ethernet-2.0.0\src/Ethernet.h:49,
                 from src\main.cpp:124:
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp: In function 'void WDT_vect()':
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:79:6: warning: 'WDT_vect' appears to be a misspelled signal handler, missing __vector prefix [-Wmisspelled-isr]
 ISR (WDT_vect)
      ^
In file included from lib\MySensors/MySensors.h:62:0,
                 from src\main.cpp:125:
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp: In function 'void hwPowerDown(uint8_t)':
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:93:26: error: 'WDTCSR' was not declared in this scope
  const uint8_t WDTsave = WDTCSR;
                          ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:97:33: error: 'WDIE' was not declared in this scope
   WDTCSR |= (1 << WDCE) | (1 << WDIE);
                                 ^
In file included from c:\.platformio\packages\toolchain-atmelavr\avr\include\avr\io.h:99:0,
                 from c:\.platformio\packages\toolchain-atmelavr\avr\include\avr\pgmspace.h:90,
                 from C:\.platformio\packages\framework-arduino-avr-megacore\cores\MegaCore/Arduino.h:28,
                 from lib\Ethernet-2.0.0\src/Ethernet.h:49,
                 from src\main.cpp:124:
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp: In function 'bool hwUniqueID(uint8_t (*)[16])':
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:264:27: error: 'SIGRD' was not declared in this scope
  *((uint8_t *)uniqueID) = boot_signature_byte_get(0x00);
                           ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:265:31: error: 'SIGRD' was not declared in this scope
  *((uint8_t *)uniqueID + 1) = boot_signature_byte_get(0x02);
                               ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:266:31: error: 'SIGRD' was not declared in this scope
  *((uint8_t *)uniqueID + 2) = boot_signature_byte_get(0x04);
                               ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:267:31: error: 'SIGRD' was not declared in this scope
  *((uint8_t *)uniqueID + 3) = boot_signature_byte_get(0x01); //OSCCAL
                               ^
In file included from lib\MySensors/MySensors.h:62:0,
                 from src\main.cpp:125:
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp: In function 'uint16_t hwCPUFrequency()':
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:304:26: error: 'WDTCSR' was not declared in this scope
  const uint8_t WDTsave = WDTCSR;
                          ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:308:2: error: 'TIFR1' was not declared in this scope
  TIFR1 = 0xFF;
  ^
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:315:18: error: 'WDIE' was not declared in this scope
  WDTCSR |= (1 << WDIE);
                  ^
In file included from c:\.platformio\packages\toolchain-atmelavr\avr\include\avr\io.h:99:0,
                 from c:\.platformio\packages\toolchain-atmelavr\avr\include\avr\pgmspace.h:90,
                 from C:\.platformio\packages\framework-arduino-avr-megacore\cores\MegaCore/Arduino.h:28,
                 from lib\Ethernet-2.0.0\src/Ethernet.h:49,
                 from src\main.cpp:124:
lib\MySensors/hal/architecture/AVR/MyHwAVR.cpp:320:29: error: 'WDIF' was not declared in this scope
  while (bit_is_clear(WDTCSR,WDIF)) {};
                             ^
*** [.pio\build\ATmega128\src\main.cpp.o] Error 1
=================================================================================== [FAILED] Took 1.07 seconds ===================================================================================
The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

I suppose there is problem with using definictions from wdt.h maybe.

#define wdt_reset() __asm__ __volatile__ ("wdr")

#ifndef __DOXYGEN__

#if defined(WDP3)
# define _WD_PS3_MASK       _BV(WDP3)
#else
# define _WD_PS3_MASK       0x00
#endif

#if defined(WDTCSR)
#  define _WD_CONTROL_REG     WDTCSR
#elif defined(WDTCR)
#  define _WD_CONTROL_REG     WDTCR
#else
#  define _WD_CONTROL_REG     WDT
#endif

#if defined(WDTOE)
#define _WD_CHANGE_BIT      WDTOE
#else
#define _WD_CHANGE_BIT      WDCE
#endif

#endif	/* !__DOXYGEN__ */

With ATmega128 board we have here NOT defined WDP3, WDTCSR and WDTOE, but defined WDTCR.
With ATmega2560 board, we have defined WDP3 and WDTCSR, but not defined WDTCR and WDTOE.

I do not know if it helps.