Skip to content
This repository has been archived by the owner on Jun 13, 2021. It is now read-only.

Latest commit

 

History

History
47 lines (36 loc) · 3.08 KB

README.md

File metadata and controls

47 lines (36 loc) · 3.08 KB
Raw

Notice: For the time being, you need to use archiso 48 to successfully build this.

archiso for Pinebook Pro

This repository contains a customized archiso preset for building images for the Pinebook Pro ARM laptop. Pre-built images are available here.

Building the image should be possible on aarch64 platforms like the Pinebook Pro itself, as well as other architectures. For building to work on non-aarch64, you'll need qemu-user-static and binfmt-qemu-static.

PKGBUILDs for the packages used in this image can be found here.

Check out the FAQ for common issues you may encounter.

Building

Building the image is fairly straightforward, install archiso, multipath-tools, and the qemu packages if you need them, then clone this repository and run build.sh as root.

If all goes well, an .img file will be placed in the out directory, and should be ready to be written to an SD card or USB stick.

Installation

The instructions in installation guide in /root mostly apply, however there are some things specific to the Pinebook Pro to be aware of:

  • The SD card is /dev/mmcblk1, eMMC is mmcblk2 and USB storage will be /dev/sdX.
  • You must leave around 16MB or more of free space before your first partition if you are installing to the eMMC, u-boot will be written here.
  • U-boot looks for a file called extlinux.conf in /extlinux, or /boot/extlinux on the first partition marked bootable on the eMMC, an example configuration is provided below.
  • Currently, the regular linux-aarch64 and linux-aarch64-rc kernels don't work, until this is sorted out you can use the pinebookpro repository included in the image (see /etc/pacman.conf) and install linux-pbp from it.
  • ap6256-firmware is needed for the Wi-Fi and Bluetooth to function, and pbp-keyboard-hwdb for the brightness control shortcuts to work correctly, both can be installed from the pinebookpro repo.
  • The pinebookpro repo will be missing from the target system's pacman.conf, make sure to edit it and add this if you want to use my prebuilt packages
[pinebookpro]
Server = https://nhp.sh/pinebookpro/

Writing u-boot to the eMMC

The Pinebook Pro currently uses u-boot as its bootloader, you can install it with the uboot-pbp package in the pinebookpro repo. Two files will be placed in /boot that need to be written to the eMMC, idbloader.img at sector 64 and u-boot.itb at sector 16384, they can be installed like this:

dd if=/boot/idbloader.img of=/dev/mmcblk2 seek=64
dd if=/boot/u-boot.itb of=/dev/mmcblk2 seek=16384

Extlinux configuration

Here is a sample extlinux.conf file:

LABEL Arch Linux ARM
KERNEL ../Image
FDT ../dtbs/rockchip/rk3399-pinebook-pro.dtb
APPEND initrd=../initramfs-linux.img console=tty1 rootwait root=UUID=<UUID> rw

Place this example configuration in a directory named extlinux in /boot. Remember to replace <UUID> with your actual partition UUID, or use one of the other options for specifying the root filesystem.