/
README
57 lines (34 loc) · 1.44 KB
/
README
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
TinyTX - An ATtiny84 and RFM12B wireless sensor node
----------------------------------------------------
By Nathan Chantrell. For hardware design see http://nathan.chantrell.net/tinytx
Licenced under the Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) licence: http://creativecommons.org/licenses/by-sa/3.0/
TinyTX_DS18B20
--------------
With DS18B20 temperature sensor.
TinyTX_DHT22
------------
With DHT22 temperature & humidity sensor.
TinyTX_TMP36
------------
With TMP36 Analogue Temperature Sensor.
TinyTX_LDR_Meter
----------------
With LDR to read LED pulses on electricity meter.
TinyTX_LDR
----------
With LDR to read light levels.
TinyTX_Water
------------
A leak/flood sensor using the TinyTX, a 100K resistor and two wire probes. See below for a receiver.
TinyTX_Water_RX
---------------
Receiver example for the above leak/flood sensor, can be run on a Tiny TX and brings D9 high on a water alarm and D10 high on a low battery alarm. Could be used to trigger an external device, sound a buzzer etc. Same code could also be used on a Nanode/WiNode etc.
TinyTX_RX_Simple
----------------
A simple receive example, outputing received data on the serial monitor.
TinyTX_NanodeRF_emoncms
-----------------------
For a Nanode sketch to upload to emoncms see: https://github.com/nathanchantrell/NanodeRF_emoncms
TinyTX_NanodeRF_Cosm
--------------------
Example to upload data from a single TinyTX to http://cosm.com