PalginHsrNeoscrypt #198

nemosminer · 2018-01-21T01:41:52Z

is fully tested and added tested with 6x10603gb & 6 x1080ti tested on all pools...
note: single card pc's may need a longer benchmark time instructions on how to do this is below..

note: benchmark time for PalginHsrNeo is min 10minutes max 18minutes

this is needed until PalginHsr adds a API to there Miner

All other algos are left at default benchmark time of 10mins per Algo

nemosminer · 2018-01-22T08:47:37Z

Ok so all benchmarks are working for me except the Hsrneo. It runs for around 18 minutes on both my 1070 and 1070 ti and has shares reporting on the miner along with nice, but when it shows the hash rate on nemos it is 0. You can see the hash rate after x second = 0 when it goes to add it to the profit and switching list.

Update: Here are some screen grabs. I notice that the hash rate file for HSR is not loading the actual hash rate. I have tried quite a bit to get it to work including deleting the hash file and benching multiple times. Not sure why.

@nemosminer
Owner
nemosminer commented 12 hours ago •
not sure all 9 of my rigs bench marked and are running fine with Palgin HSr ... whats wrong with your screen? Palgin won't read speed until the words "over speed is" is displayed in HSR miner window

re run and see if it passes

if you want to increase HSR benchmark

edit: include.ps1

find: "wrapper" {
do {
Start-Sleep 600 #plus 10mins to HSRNeo Benchmark

increase the 600

@zzup

zzup commented 11 hours ago •
This is what happened on 2 of my rigs. The screen issue is due to remoting into it and reducing the graphics quality. Basically it is just not refeshing the non changing parts of the screen.

It is strange as only HSR is doing the issue with 0 has being shown in the benchmark file even though it is roughly doing 1.3 mh/s

Update: Trying to increase the time now. I dont think i have seen the over speed is yet.

@zzup

zzup commented 11 hours ago •
OK it took 21 minutes to finally get this screenshot and it updated! Increased the 600 to 900 fixed it. Long but effective benchmark.
hsr7

This is a single 1070. Most of my systems are single card just being we are a family with quite a few gaming computers that mine well :)

@nemosminer
Owner
nemosminer commented 10 hours ago
yip single card rigs are the problem as it takes one card so long to get to the "overall speed is"
thats why i had to increase it to 18mins in the first place...

pjdouillard · 2018-01-22T20:47:58Z

On a system with a Titan Xp Collectors Edition, when the script tries to benchmark, it produces the following (vs Nicehash pool):

INFO : [15:52:09] : Securing devfee mining...
INFO : [15:52:09] : Dev_Main OK.
INFO : [15:52:10] : Dev_Backup OK.
INFO : [15:52:10] : Dev pools checked, at least 1 accessible, continue...
INFO : [15:52:10] : POOL: stratum+tcp://neoscrypt.usa.nicehash.com:3341
INFO : [15:52:10] : Checking for NVML...
INFO : [15:52:10] : NVML monitoring enabled, continue...
INFO : [15:52:10] : 1 GPU found/specified, initializing miner...
INFO : [15:52:10] : Share difficulty reset -- 4096 (0.06250)
INFO : [15:52:10] : New block #36224 received, new difficulty is 1151.523
INFO : [15:52:10] : GPU #0: TITAN Xp COLLECTORS EDITION, flags: 0, 0, 0
INFO : [15:52:10] : submit_upstream_work stratum_send_line failed
INFO : [15:52:10] : ...retry after 10 seconds
INFO : [15:52:10] : Share Rejected, Share above target.
INFO : [15:52:10] : Share Rejected, Share above target.
INFO : [15:52:10] : Share Rejected, Share above target.
INFO : [15:52:10] : Share Rejected, Share above target.
INFO : [15:52:10] : Share Rejected, Share above target.
INFO : [15:52:10] : Share Rejected, Share above target.
....
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
INFO : [15:45:14] : Share Rejected, Job not found.
...
INFO : [15:50:23] : Share Rejected, Job not found.
INFO : [15:50:23] : Connection interrupted
INFO : [15:50:23] : submit_upstream_work stratum_send_line failed
INFO : [15:50:23] : ...retry after 10 seconds

Why is this happening? It just can't mine it seems.

At the same time, when on other system, everything runs fine.

Update: Systems with GTX 1060 works ok, but all systems with 1080 Ti or Titan Xp just can't run it.

joesixpack · 2018-01-22T21:19:52Z

Yeah, HSRNeo is bugged on Ti's and the dev is MIA. Have to stick to Klaust. Fastest is not always best, stability is more important than finding yourself with an 8+ hour rig downtime.

nemosminer · 2018-01-22T21:53:04Z

im not MIA (sorry it took me 30mins to respond...) 1080ti have the biggest improvment ! over KlausT +15% hashrate....

no bug

i have two 6 x 1080ti rigs myself i can confirm the speed increase

i don't own any Titan's so can't confirm.. KlausT may be better with Titan's

pjdouillard · 2018-01-22T22:56:20Z

How do I get that latest Klaust Algo and replace the one in your setup?

Nice Powershell scrip btw, really good to see there are still some skilled people knowing how to use it properly!

nemosminer · 2018-01-22T23:02:49Z

https://github.com/nemosminer/NemosMiner-v2.4.1/archive/master.zip

Best Regards
Nemo

pjdouillard · 2018-01-22T23:10:22Z

I see the miner was there, but what script do I need to modify to use it?
If only add back 'neoscrypt' to the .bat file, it will run the Hsr version.

Thx for any help.

pjdouillard · 2018-01-23T00:24:39Z

Ok finally found how:

edit file ccminerKlaust.ps1 in Miners folder and remove the comment on the Neoscrypt line. Save the file.
edit file palginhsr.ps1 in Miners folder and comment out the Neoscrypt line. Save.
Rerun your benchmark.
...
Profit

nemosminer · 2018-01-23T00:25:50Z

edit: CcminerKlausT,ps1

find: #"neoscrypt" = " -d $SelGPUCC" #NeoScrypt

change to: "neoscrypt" = " -d $SelGPUCC" #NeoScrypt

save

cmbconcretefire · 2018-01-23T13:37:59Z

Hey nemo, just wanted to say that the comment above "and the dev is MIA" ----- the way I read that, it sounded to me like they were talking about Palgin. Not you. :)

pjdouillard · 2018-01-23T14:08:40Z

The Klaust ccminer works great with the Titan Xp and 1080Ti. The Titan Xp gives me 1.41 MH/s @ +125 Core/+500 Mem/70% Power.

nemosminer · 2018-01-23T20:13:39Z

i get 1.61mhs from a 1080ti with PalginHSR at 75+tdp(175watt( +50 core +500 mem ...... i have added KlausT back into miners folder for Titian owers

pjdouillard · 2018-01-23T20:27:38Z

1.61 Mhs locally, but what is your reported hashrate of the pool's web page? I read there is some difference between the two and the speed is about the same as Klaust.

nemosminer · 2018-01-23T22:20:25Z

same on pool...

joesixpack · 2018-01-24T06:47:56Z

Yeah, was talking about the Palgin dev.

It may run fine in the short term, but let it run 24 hours...

RevngeSevnFold · 2018-01-24T16:17:44Z

I cant get PalginHSR to finish benchmarking. I can see my hash rate and everything but the Benchmarking just won't finish(Stopped it after an hour) and save the damn hash rate. Tried the 900 sec on start still wont save the hash rate. Not sure why as I dont get or see any errors.

Rig I tried the upgrade on runs 2 1070's and one 1060 6GB

nemosminer · 2018-01-26T21:09:43Z

re added KlausT

edit: CcminerKlausT,ps1

find: #"neoscrypt" = " -d $SelGPUCC" #NeoScrypt

change to: "neoscrypt" = " -d $SelGPUCC" #NeoScrypt

save

ruarkbg · 2018-01-31T09:49:24Z

The hsr miner benchmark is not working properly with 8 x 1080ti.
You could check the error message and the wrong hash result in the attached screenshot:

gaim281 · 2018-01-31T19:55:05Z

@ruarkbg , the error above accrue only when ur hashRate is bigger then 10000KH/s so the number of hashrate*(1000^2) is bigger the int.
maybe is should be $HashRate = [double]$HashRate (wrapper.ps ln 57)

@nemosminer , also when $HashRate is bigger then 10000KH/s other error i cant figure out, benchmark hashrate goes up to 100-1000TH/s and miner always mine neoscrypt.. this is a serious bug
my rig 8X1070ti
besides that nemosminer is really good for me.

update:
i fixed few lines in wrapper.ps1 that mess the hashrate for PalginHSR when ur rate is over 10MH/s
line 52:
switch ($tmp) {
"KH/s" {$HashRate *= [Math]::Pow(1000, 1)}
"mH/s" {$HashRate *= [Math]::Pow(1000, 1)}
"MH/s" {$HashRate *= [Math]::Pow(1000, 1)}
}
$HashRate = [double]$HashRate

Also removed the added 10mins to HSRNeo Benchmark (include.ps1 ln.426)

this fixes works for me so far (20-30 hrs)

ghost · 2018-02-02T12:39:52Z

Hello,
@gaim281 , I do not work at 8x1080ti, the problem continues as with @ruarkbg :(

@nemosminer, can you help us please.

Regards,

gaim281 · 2018-02-02T12:42:54Z

@ktsonevski whats ur total hash rate ?
for my hashrate 10.5MH/s it works gr8

ghost · 2018-02-02T12:49:02Z

Yes, and mine is just like: 10.45~10-48

gaim281 · 2018-02-02T12:51:48Z

delete PalginNeoHashrate.txt from miner root dir and PalginHSR_NeoScrypt_HashRate.txt from stat dir
and try benchmark again
there's should be a better fix by owner, this is just a rough hack to keep rollin'

ghost · 2018-02-02T13:37:14Z

@gaim281
Can you upload the two config files somewhere, for example: pastebin.com

gaim281 · 2018-02-02T17:12:50Z

@ktsonevski ,
.\stat\PalginHSR_NeoScrypt_HashRate.txt >> https://pastebin.com/2PFYxyaM
.\PalginNeoHashrate.txt >> 10310000 (just put this value in empty PalginNeoHashrate.txt file )

as you said if we have same rates +/- so it should work without benchmark
anyway you should replace lines 52-57 in wrapper.ps1 with this code:

switch ($Words -like "H/s" -replace "[0-9.,]",'' | Select-Object -Last 1) {
"KH/s" {$HashRate *= [Math]::Pow(1000, 1)}
"mH/s" {$HashRate *= [Math]::Pow(1000, 1)}
"MH/s" {$HashRate *= [Math]::Pow(1000, 1)}
}
$HashRate = [int]$HashRate

all the best

kodeballer · 2018-02-20T06:47:13Z

is this still necessary with version 2.5? Thanks

gaim281 · 2018-02-20T18:40:45Z

@kodeballer unbelievably yes... still needed for me.
i get 10.11TH/s instead of 10.11MH/s
dono why he didnt fix it

nemosminer · 2018-02-21T22:47:53Z

: ) try now sorry for delay

nemosminer · 2018-02-21T23:19:11Z

done

nemosminer changed the title ~~PalginHsrNeoscrypt Done~~ PalginHsrNeoscrypt Jan 21, 2018

Repository owner deleted a comment from Coinminer24 Jan 21, 2018

nemosminer mentioned this issue Jan 22, 2018

NVIDIAPalgin (hsrminer-neoscrypt) doesnt benchmark with >1 gpu MultiPoolMiner/MultiPoolMiner#1030

Closed

Repository owner deleted a comment Jan 29, 2018

nemosminer closed this as completed Feb 21, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

PalginHsrNeoscrypt #198

PalginHsrNeoscrypt #198

nemosminer commented Jan 21, 2018 •

edited

Loading

nemosminer commented Jan 22, 2018

pjdouillard commented Jan 22, 2018 •

edited

Loading

joesixpack commented Jan 22, 2018 •

edited

Loading

nemosminer commented Jan 22, 2018 •

edited

Loading

pjdouillard commented Jan 22, 2018

nemosminer commented Jan 22, 2018

pjdouillard commented Jan 22, 2018

pjdouillard commented Jan 23, 2018

nemosminer commented Jan 23, 2018

cmbconcretefire commented Jan 23, 2018

pjdouillard commented Jan 23, 2018

nemosminer commented Jan 23, 2018 •

edited

Loading

pjdouillard commented Jan 23, 2018 •

edited

Loading

nemosminer commented Jan 23, 2018 •

edited

Loading

joesixpack commented Jan 24, 2018

RevngeSevnFold commented Jan 24, 2018

nemosminer commented Jan 26, 2018

ruarkbg commented Jan 31, 2018

gaim281 commented Jan 31, 2018 •

edited

Loading

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018 •

edited

Loading

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018 •

edited

Loading

kodeballer commented Feb 20, 2018

gaim281 commented Feb 20, 2018

nemosminer commented Feb 21, 2018

nemosminer commented Feb 21, 2018

PalginHsrNeoscrypt #198

PalginHsrNeoscrypt #198

Comments

nemosminer commented Jan 21, 2018 • edited Loading

nemosminer commented Jan 22, 2018

pjdouillard commented Jan 22, 2018 • edited Loading

joesixpack commented Jan 22, 2018 • edited Loading

nemosminer commented Jan 22, 2018 • edited Loading

pjdouillard commented Jan 22, 2018

nemosminer commented Jan 22, 2018

pjdouillard commented Jan 22, 2018

pjdouillard commented Jan 23, 2018

nemosminer commented Jan 23, 2018

cmbconcretefire commented Jan 23, 2018

pjdouillard commented Jan 23, 2018

nemosminer commented Jan 23, 2018 • edited Loading

pjdouillard commented Jan 23, 2018 • edited Loading

nemosminer commented Jan 23, 2018 • edited Loading

joesixpack commented Jan 24, 2018

RevngeSevnFold commented Jan 24, 2018

nemosminer commented Jan 26, 2018

ruarkbg commented Jan 31, 2018

gaim281 commented Jan 31, 2018 • edited Loading

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018 • edited Loading

ghost commented Feb 2, 2018

gaim281 commented Feb 2, 2018 • edited Loading

kodeballer commented Feb 20, 2018

gaim281 commented Feb 20, 2018

nemosminer commented Feb 21, 2018

nemosminer commented Feb 21, 2018

nemosminer commented Jan 21, 2018 •

edited

Loading

pjdouillard commented Jan 22, 2018 •

edited

Loading

joesixpack commented Jan 22, 2018 •

edited

Loading

nemosminer commented Jan 22, 2018 •

edited

Loading

nemosminer commented Jan 23, 2018 •

edited

Loading

pjdouillard commented Jan 23, 2018 •

edited

Loading

nemosminer commented Jan 23, 2018 •

edited

Loading

gaim281 commented Jan 31, 2018 •

edited

Loading

gaim281 commented Feb 2, 2018 •

edited

Loading

gaim281 commented Feb 2, 2018 •

edited

Loading