HCL Ippon Back Basic 850 Euro supported by blazer_usb

[droserasprout]

It seems like blazer_usb autodetect fails to guess correct protocol for some reason.

ups.conf

[ippon]
    driver = blazer_usb
    subdriver = cypress
    protocol = megatec
    port = auto
    vendorid = 0665
    productid = 5161
    desc = "Ippon Back Basic 850 Euro"

lsusb -vvv

Bus 003 Device 003: ID 0665:5161 Cypress Semiconductor USB to Serial
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0665 Cypress Semiconductor
  idProduct          0x5161 USB to Serial
  bcdDevice            0.02
  iManufacturer           1 INNO TECH
  iProduct                2 USB to Serial
  iSerial                 3 20100826
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0022
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          3 20100826
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              4 Sample HID
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      27
         Report Descriptors: 
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              32
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0000
  (Bus Powered)

upsc

battery.charge: 100
battery.voltage: 13.60
battery.voltage.high: 13.00
battery.voltage.low: 10.40
battery.voltage.nominal: 12.0
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 5161
driver.parameter.protocol: megatec
driver.parameter.subdriver: cypress
driver.parameter.synchronous: no
driver.parameter.vendorid: 0665
driver.version: 2.7.4
driver.version.internal: 0.12
input.current.nominal: 3.0
input.frequency: 50.3
input.frequency.nominal: 50
input.voltage: 222.0
input.voltage.fault: 221.4
input.voltage.nominal: 220
output.voltage: 221.4
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 13
ups.productid: 5161
ups.status: OL
ups.temperature: 25.0
ups.type: offline / line interactive
ups.vendorid: 0665

[clepple]

Thanks. Does nutdrv_qx do any better at detecting the UPS? That driver is somewhat newer than the blazer_* drivers.