Enums used in NI-Digital Pattern Driver
.. py:currentmodule:: nidigital
.. py:class:: BitOrder
.. py:attribute:: BitOrder.MSB
The most significant bit is first. The first bit is in the 2^n place, where n is the number of bits.
.. py:attribute:: BitOrder.LSB
The least significant bit is first. The first bit is in the 2^0 place.
.. py:class:: DigitalEdge
.. py:attribute:: DigitalEdge.RISING
Asserts the trigger when the signal transitions from low level to high level.
.. py:attribute:: DigitalEdge.FALLING
Asserts the trigger when the signal transitions from high level to low level.
.. py:class:: DriveFormat
.. py:attribute:: DriveFormat.NR
Drive format remains at logic level after each bit.
.. py:attribute:: DriveFormat.RL
Drive format returns to a logic level low after each bit.
.. py:attribute:: DriveFormat.RH
Drive format returns to a logic level high after each bit.
.. py:attribute:: DriveFormat.SBC
Drive format returns to the complement logic level of the bit after each bit.
.. py:class:: FrequencyMeasurementMode
.. py:attribute:: FrequencyMeasurementMode.BANKED
Frequency measurements are made serially for groups of channels associated with a single frequency counter for each group.
Maximum frequency measured: 200 MHz.
.. py:attribute:: FrequencyMeasurementMode.PARALLEL
Frequency measurements are made by multiple frequency counters in parallel.
Maximum frequency measured: 100 MHz.
.. py:class:: HistoryRAMCyclesToAcquire
.. py:attribute:: HistoryRAMCyclesToAcquire.FAILED
Acquires failed cycles.
.. py:attribute:: HistoryRAMCyclesToAcquire.ALL
Acquires all cycles.
.. py:class:: HistoryRAMTriggerType
.. py:attribute:: HistoryRAMTriggerType.FIRST_FAILURE
First Failure History RAM trigger
.. py:attribute:: HistoryRAMTriggerType.CYCLE_NUMBER
Cycle Number History RAM trigger.
.. py:attribute:: HistoryRAMTriggerType.PATTERN_LABEL
Pattern Label History RAM trigger
.. py:class:: PPMUApertureTimeUnits
.. py:attribute:: PPMUApertureTimeUnits.SECONDS
Unit in seconds.
.. py:class:: PPMUCurrentLimitBehavior
.. py:attribute:: PPMUCurrentLimitBehavior.REGULATE
Controls output current so that it does not exceed the current limit. Power continues to generate even if the current limit is reached.
.. py:class:: PPMUMeasurementType
.. py:attribute:: PPMUMeasurementType.CURRENT
The PPMU measures current.
.. py:attribute:: PPMUMeasurementType.VOLTAGE
The PPMU measures voltage.
.. py:class:: PPMUOutputFunction
.. py:attribute:: PPMUOutputFunction.VOLTAGE
The PPMU forces voltage to the DUT.
.. py:attribute:: PPMUOutputFunction.CURRENT
The PPMU forces current to the DUT.
.. py:class:: PinState
.. py:attribute:: PinState.ZERO
A digital state of 0.
.. py:attribute:: PinState.ONE
A digital state of 1.
.. py:attribute:: PinState.L
A digital state of L (low).
.. py:attribute:: PinState.H
A digital state of H (high).
.. py:attribute:: PinState.X
A digital state of X (non-drive state).
.. py:attribute:: PinState.M
A digital state of M (midband).
.. py:attribute:: PinState.V
A digital state of V (compare high or low, not midband; store results from capture functionality if configured).
.. py:attribute:: PinState.D
A digital state of D (drive data from source functionality if configured).
.. py:attribute:: PinState.E
A digital state of E (compare data from source functionality if configured).
.. py:attribute:: PinState.NOT_A_PIN_STATE
Not a pin state is used for non-existent DUT cycles.
.. py:attribute:: PinState.PIN_STATE_NOT_ACQUIRED
Pin state could not be acquired because none of the pins mapped to the instrument in a multi-instrument session had any failures.
.. py:class:: SelectedFunction
.. py:attribute:: SelectedFunction.DIGITAL
The pattern sequencer controls the specified pin(s). If a pattern is currently bursting, the pin immediately switches to bursting the pattern. This option disconnects the PPMU.
.. py:attribute:: SelectedFunction.PPMU
The PPMU controls the specified pin(s) and connects the PPMU. The pin driver is in a non-drive state, and the active load is disabled. The PPMU does not start sourcing or measuring until Source or Measure(PpmuMeasurementType) is called.
.. py:attribute:: SelectedFunction.OFF
Puts the digital driver in a non-drive state, disables the active load, disconnects the PPMU, and closes the I/O switch connecting the instrument channel.
.. py:attribute:: SelectedFunction.DISCONNECT
The I/O switch connecting the instrument channel is open to the I/O connector. If the PPMU is sourcing, it is stopped prior to opening the I/O switch.
.. py:attribute:: SelectedFunction.RIO
Yields control of the specified pin(s) to LabVIEW FPGA.
.. py:class:: SequencerFlag
.. py:attribute:: SequencerFlag.FLAG0
.. py:attribute:: SequencerFlag.FLAG1
.. py:attribute:: SequencerFlag.FLAG2
.. py:attribute:: SequencerFlag.FLAG3
.. py:class:: SequencerRegister
.. py:attribute:: SequencerRegister.REGISTER0
.. py:attribute:: SequencerRegister.REGISTER1
.. py:attribute:: SequencerRegister.REGISTER2
.. py:attribute:: SequencerRegister.REGISTER3
.. py:attribute:: SequencerRegister.REGISTER4
.. py:attribute:: SequencerRegister.REGISTER5
.. py:attribute:: SequencerRegister.REGISTER6
.. py:attribute:: SequencerRegister.REGISTER7
.. py:attribute:: SequencerRegister.REGISTER8
.. py:attribute:: SequencerRegister.REGISTER9
.. py:attribute:: SequencerRegister.REGISTER10
.. py:attribute:: SequencerRegister.REGISTER11
.. py:attribute:: SequencerRegister.REGISTER12
.. py:attribute:: SequencerRegister.REGISTER13
.. py:attribute:: SequencerRegister.REGISTER14
.. py:attribute:: SequencerRegister.REGISTER15
.. py:class:: SoftwareTrigger
.. py:attribute:: SoftwareTrigger.START
Overrides the start trigger.
.. py:attribute:: SoftwareTrigger.CONDITIONAL_JUMP
Specifies to route a conditional jump trigger.
.. py:class:: SourceDataMapping
.. py:attribute:: SourceDataMapping.BROADCAST
Broadcasts the waveform you specify to all sites.
.. py:attribute:: SourceDataMapping.SITE_UNIQUE
Sources unique waveform data to each site.
.. py:class:: TDREndpointTermination
.. py:attribute:: TDREndpointTermination.OPEN
TDR channels are connected to an open circuit.
.. py:attribute:: TDREndpointTermination.SHORT_TO_GROUND
TDR channels are connected to a short to ground.
.. py:class:: TerminationMode
.. py:attribute:: TerminationMode.ACTIVE_LOAD
The active load provides a constant current to a commutating voltage (Vcom).
.. py:attribute:: TerminationMode.VTERM
The pin driver drives Vterm.
.. py:attribute:: TerminationMode.HIGH_Z
The pin driver is in a non-drive state (in a high-impedance state) and the active load is disabled.
.. py:class:: TimeSetEdgeType
.. py:attribute:: TimeSetEdgeType.DRIVE_ON
Specifies the drive on edge of the time set.
.. py:attribute:: TimeSetEdgeType.DRIVE_DATA
Specifies the drive data edge of the time set.
.. py:attribute:: TimeSetEdgeType.DRIVE_RETURN
Specifies the drive return edge of the time set.
.. py:attribute:: TimeSetEdgeType.DRIVE_OFF
Specifies the drive off edge of the time set.
.. py:attribute:: TimeSetEdgeType.COMPARE_STROBE
Specifies the compare strobe of the time set.
.. py:attribute:: TimeSetEdgeType.DRIVE_DATA2
Specifies the drive data 2 edge of the time set.
.. py:attribute:: TimeSetEdgeType.DRIVE_RETURN2
Specifies the drive return 2 edge of the time set.
.. py:attribute:: TimeSetEdgeType.COMPARE_STROBE2
Specifies the compare strobe 2 of the time set.
.. py:class:: TriggerType
.. py:attribute:: TriggerType.NONE
Disables the start trigger.
.. py:attribute:: TriggerType.DIGITAL_EDGE
Digital edge trigger.
.. py:attribute:: TriggerType.SOFTWARE
Software start trigger.
.. py:class:: WriteStaticPinState
.. py:attribute:: WriteStaticPinState.ZERO
Specifies to drive low.
.. py:attribute:: WriteStaticPinState.ONE
Specifies to drive high.
.. py:attribute:: WriteStaticPinState.X
Specifies to not drive.