Integration causing Homeassistant to crash.

[hxdx9527]

Environments:
 1. M2_POE gateway with the latest mofified firmware. (static IP adress).
 2. Asus router AX88U PRO
 3. Homeasssitant Green with software version 2024.5.1. (static IP address)

Timeline:

1. After rebooting my router, I cannot visit hass web ui. Ping to the host is ok.
2. Plug in a hdmi cable to the HASS Green and disabled the aqara_gateway custom component by removing the folder.
3. Reboot and the system works fine.
   I checked the core logs and supervisor logs, no thing related to this integration is printed.

Please let me know if any more infomation is needed.

[niceboygithub]

If the ip of gateway was changed, the integration can not connecting the mqtt of gateway, the HA will become busy and slow. Suggest that use fixed IP of the gateway.

[hxdx9527]

@niceboygithub The IP of the gateway has not changed. I've maunually set it manually the day I purchased it.

[hxdx9527]

I jsut did a test.
If it is ip problem you mentioned. There is a error log in ha core log.
But when it happened to me, there was no such error log.

[lihuohuo9527]

I have the same problem as him, the same device, the same version.
After my testing, after disabling aqara_gateway, the web returned to normal.
I have been searching for where the problem lies, hoping that the author can solve it.

[lihuohuo9527]

I jsut did a test. If it is ip problem you mentioned. There is a error log in ha core log. But when it happened to me, there was no such error log.

Can it be an issue with the Asus Merlin firmware? I am using Merlin firmware, the same issue, but I don't see anyone else responding to the issue.

[notabene00]

Stock firmware, 3.3.4, telnet enabled (qr-code method, where bind_key swapped with payload)
Home Assistant crashed every time I'm trying to add my G2H Pro to it

[lihuohuo9527]

Please take this issue seriously and resolve it

[niceboygithub]

There are several gateways using AqaraGateway integration in my HA without any problems.

Please have a try on master branch.

[lihuohuo9527]

我并没有使用MQTT 这有影响吗？

[niceboygithub]

This integration is using mqtt of the gateway to send/receive the info of zigbee devices.

[lihuohuo9527]

这个问题困扰我太久了，我使用的是aqara的开关、小燕的灯具，但我并没有将灯线接入开关内，而是在HA内做自动化将灯具和开关进行联动。但是HA webUI经常崩溃，导致开关和灯具无法联动，删除文件夹禁用 aqara_gateway 自定义组件后WEB UI恢复。等下次出现同样问题的时候我会将su logs提供给你，真的太痛苦了....

[lihuohuo9527]

This problem has occurred again, and I have recorded the logs

[lihuohuo9527]

If you need any other information, please let me know and I will add it
The gateway IP address is static, but I don't know why it is converted to IPV6 here
core logs

su logs

[lihuohuo9527]

Please take this issue seriously and resolve it

[niceboygithub]

Did you try the latest version of this integration?