New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[BUG] v0.5.4.0 RC LHR+nonLHR mixed rig, lhr card not fully unlocked #840
Comments
Hello, I have this problem also. If my rig only has 3080 Ti, I get 120mh/s and full unlock. If I plug in my non LHR 3080 too, the unlock says to be still 100 but 3080 Ti hashrate drops to ~60mh/s. Any ideas? |
Hi, I have same problem.. RTX 3070Ti + 3070 nonLHR = NO unlock LHR card |
Same problem with LHR 3080 TI and LHR 3080 12GB OC |
Try with just 1 LHR card in the rig. |
I'm having the exact same problem |
I have the same problem with LHR RTX3080 and non-LHR RTX3070. |
v0.5.4.1 resolved the issue. Good luck everyone! |
I have two rigs, one with just 3070ti LHR - now it does 80MH/s at 190W
Second rig is 3070ti LHR and 3070 non-LHR. 3979ti only does 44MH/s at 130W with same overclock settings as in first rig. 3070 does 62MH/s (same as on older QuickMiner).
Wattage and temperature for 3070ti in second rig is now much less now, so unlock does have some effect.
System:
both rigs have same build of Win10 installed
QM v0.5.4.0 RC
NVIDIA driver version
v487.29 - both rigs
Hardware
first rig is intel (actually its a vm with gpu pass-though, works as expected without any issues)
second rig is AMD 2700X on MSI B450M Mortar
Additional context
I've tried to move as much settings from rig1 to rig2: nhqm.conf, commands.json and LHRsettings.conf - partially, changing gpu guids, no change.
I'm going to try newer driver on second rig and will report if there are any changes to behavior.
Both rigs were auto-upgraded from v0.5.3.4. I tried unpacking and running RC zip from github, but it would not let me apply neither OC nor FAN settings in OCTune.
The text was updated successfully, but these errors were encountered: