Releases: nicehash/NiceHashQuickMiner
Prerelease v0.5.4.2 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 470.05 OR HIGHER!
The new LHR unlock algorithm may unstabilize the NVIDIA driver (drivers shall restart automatically).
Changelog:
v0.5.4.2
- Partial unlock (~90%) of LHRv3 cards (3080 and 3050 12GB)
Prerelease v0.5.4.1 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 470.05 OR HIGHER!
Changelog:
v0.5.4.1
- Add a secondary unlock system for cards which doesn't unlock after DAG generation
- When the monitoring fails to return a valid value exit application
Prerelease v0.5.4.0 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 470.05 OR HIGHER!
Changelog:
v0.5.4.0
- Full LHR removal
- Adjusted LHR timings
- Job switching optimizations
Stable release v0.5.3.6
Download Installer here
The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:
IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.
Stable version 0.5.3.6 is available using this zip file:
- Download ZIP package,
For your safety, we recommend that you verify the SHA checksums.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 461.33 OR HIGHER!
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
Changes since the last stable version v0.5.3.3:
- Fix the bug which turned off Nvidia core OC in profile2. This one is now restored
- Eula/notice won't show up anymore during installation, only when the program is run the first time or if files are missing.
- Add 3060 mobile version to the non LHR list
- Add 3070 mobile version to non LHR list (that non-LHR card is still unconfirmed)
- Bump minimal version to 470.05 in QM
- Added new 3050 and 3080 12Gb to non LHR list (new LHR version not supported yet)
- Fix and add support for testnet segwit address
- Fix the issue where nhqm.conf is deleted when a crash happens
- Correct issue which was causing some machines to crash on start
- Implement a new mining address nhmp.auto.nicehash.com
- Redesign the start/stop mining button
- Bypass latency check, it is not necessary anymore with a new mining address
- Add PID fan control to AMD and Nvidia cards
- Correct the issue where nhqm.conf was being modified constantly
- Decrease smart fan update from 1s to 4s
- Decrease LHR check/update from 1s to 4s (=> reduces CPU usage)
- Compatibility fixes for the Linux version
- Allows overriding fan regime while OC profile is applied
- Allows changing LHR parameters while auto-tuning is active
- Supported GPU list is determined using SM version and memory rather than using a hardcoded list
- Fix clock range for 3080ti for OC autotuning in OCtune
Prerelease v0.5.3.6 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 470.05 OR HIGHER!
Changelog:
v0.5.3.6
- Fix issue where nhqm.conf is deleted when a crash happens
- Correct issue which was causing on some machine to crash on start
- Implement new mining address nhmp.auto.nicehash.com
- Redesign start/stop mining button
- Bypass latency check, it is not necessary anymore with a new mining address
- Add PID fan control to AMD and Nvidia cards
- Correct issue where nhqm.conf was being modified constantly
- Decrease smart fan update from 1s to 4s
- Decrease LHR check/update from 1s to 4s (=> reduces CPU usage)
- Compatibility fixes for Linux version
- Allows overriding fan regime while OC profile is applied
- Allows changing LHR parameter while auto-tuning is active
- Supported GPU list is determined using SM version and memory rather than using a hardcoded list
- Fix clock range for 3080ti for OC autotuning in OCtune
Prerelease v0.5.3.5 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 470.05 OR HIGHER!
Changelog:
v0.5.3.5
- Fix bug which turned off Nvidia core OC in profile2. This one is now restored
- Eula/notice won't show up anymore during installation, only when the program is run the first time or if files are missing.
- Add 3060 mobile version to non LHR list
- Add 3070 mobile version to non LHR list (that non-LHR card is still unconfirmed)
- Bump minimal version to 470.05 in QM
- Added new 3050 and 3080 12Gb to non LHR list (new LHR version not supported yet)
- Fix and add support for testnet segwit address
Stable release v0.5.3.3
Download Installer here
The installer downloads the latest version and verifies the integrity and authenticity of all files. You have to make sure to run only trusted software signed by our certificate owned by company H-BIT d.o.o. You should see a UAC message like this one:
IMPORTANT: In this version, some non-LHR 3080/3090 cards, might be detected as LHR cards and speed will drop drastically after installation. This is a known bug and is fixed in the v0.5.3.4_RC.
IMPORTANT: If you have issues with Windows Defender (partially) blocking NiceHash QuickMiner, then read about the solution here.
The following versions available using the installer are:
- 0.5.3.4 RC
- 0.5.3.3
Stable version 0.5.3.3 is currently available using this zip file:
- Download ZIP package,
For your safety, we recommend that you verify the SHA checksums.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 461.33 OR HIGHER!
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
Changes since last stable version v0.5.2.0:
- Fix crashes due to the presence of AMD processor with integrated GPU (and hardware not supported by Overdrive)
- Integrated GPU is now properly recognized but is disabled (appears as "stopped" in rig manager)
- Disable GPU with less than 5Gb of VRAM (GPU appears as "stopped" in rig manager)
- Fix issue where the AMD detection routine in QM was failing while loading hardware information on a rig with more than 5/6 GPUs. The routine can now support up to 16 GPU's
- Implement Game Mode for AMD card (same level of support as NVIDIA cards)
- fix the issue with 5xxx online profile crashing the driver on reset when the core voltage has been modified
- fix a potential memory leak in OpenCL as all allocated memory buffers were not properly released when a new dag detected
- cosmetic changes in excavator execution window:
- AMD cards are displayed in the same way as the Nvidia ones
- error messages related to the AMD detections appear only for machines having AMD cards
- remove unnecessary debugging information
- Correct memory leak due to cl_event
- Remove unnecessary cl_event
- Use a fixed delay time in latency hiding logic
- Reorganise buffer declaration
- Allow bypassing AMD device detection which seems to not work for some users
- Fix flow to avoid crashes on non ampere GPUs
- Store autotune parameters
- Support for AMD cards
- Bug fixes and small improvements
- Unlock LHR cards
- New icons
- Support for reporting mining statistics with key 's'
- Connection related reports
- Added age agreement checkbox
- Removed hidden miner execution settings
- Fix for incorrect speed reporting at startup
- More stable speed reports during runtime
- Small improvement on ethereum kernel
- OCTune LHR manipulation
- Bug fixes and small improvements
Prerelease v0.5.3.4 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 461.33 OR HIGHER!
Changelog:
v0.5.3.4
- Support for segwit addresses
- New QM startup (AVG compliance)
- QM does not start mining automatically anymore
- Display notice to be accepted by users
- Solve various issues where QM is stuck waiting for excavator answer while this one has crashed. Force excavator to exit so that excavator can be restarted (nb: in some cases, a manual reboot may still be required (hard driver crash))
- Increase /devices_cuda API timeout as it was causing QM to report a nonexisting loss of communication with the excavator
- Apply core clock/voltage OC only on highest power states for 5xxx series and below
- Solve issue where the "start" buttons were not synchronized
- The main form is shown by default, behavior can be changed in setting or from the main form
- Eula/notice is required if the RTF files are missing from the licenses directory
- Add 3050 to the list of LHR card
- Fix logic such that non-LHR cards such as 3090 cannot trigger LHR
- Solve issue where the "start" buttons were not synchronized
- The main form is shown by default, behavior can be changed in setting or from the main form
- Treat as non-LHR the 3060 LHRv1 if it is detected in conjunction with Nvidia driver 470.05 which allows bypassing LHR.
Prerelease v0.5.3.3 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
The simplest way to install NiceHash QuickMiner is by using Installer which also gives you the option to install this prerelease RC version. If you have issues, then download ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 461.33 OR HIGHER!
Changelog:
v0.5.3.3
- Fix crashes due to the presence of AMD processor with integrated GPU (and hardware not supported by Overdrive)
- Integrated GPU is now properly recognized but is disabled (appears as "stopped" in rig manager)
- Disable GPU with less than 5Gb of VRAM (GPU appears as "stopped" in rig manager)
- Fix issue where the AMD detection routine in QM was failing while loading hardware information on a rig with more than 5/6 GPUs. The routine can now support up to 16 GPU's
- Implement Game Mode for AMD card (same level of support as NVIDIA cards)
- fix the issue with 5xxx online profile crashing the driver on reset when the core voltage has been modified
- fix a potential memory leak in OpenCL as all allocated memory buffers were not properly released when a new dag detected
- cosmetic changes in excavator execution window:
- AMD cards are displayed in the same way as the Nvidia ones
- error messages related to the AMD detections appear only for machines having AMD cards
- remove unnecessary debugging information
v0.5.3.2
- Correct memory leak due to cl_event
- Remove unnecessary cl_event
- Use a fixed delay time in latency hiding logic
- Reorganise buffer declaration
- Allow bypassing AMD device detection which seems to not work for some users
- Fix flow to avoid crashes on non ampere GPUs
v0.5.3.1
- Store autotune parameters
- Support for AMD cards
- Bug fixes and small improvements
Prerelease v0.5.3.0 RC
This is an untested version. The latest stable version can be downloaded here.
VERY IMPORTANT!
After downloading the file, make sure the checksums match.
Please, submit all bugs, ideas and recommendations here.
By downloading this software you agree to the Terms of Service and give consent to collect, use and store your data according to our Privacy Policy.
Currently, this version is available as a ZIP package.
ATTENTION! THIS VERSION REQUIRES NVIDIA DRIVER VERSION 461.33 OR HIGHER!
Changelog:
v0.5.3.0:
- Unlock LHR cards
- New icons
- Support for reporting mining statistics with key 's'
- Connection related reports
- Added age agreement checkbox
- Removed hidden miner execution settings
- Fix for incorrect speed reporting at startup
- More stable speed reports during runtime
- Small improvement on ethereum kernel
- OCTune LHR manipulation
- Bug fixes and small improvements