termios.rs

//! An interface for controlling asynchronous communication ports
//!
//! This interface provides a safe wrapper around the termios subsystem defined by POSIX. The
//! underlying types are all implemented in libc for most platforms and either wrapped in safer
//! types here or exported directly.
//!
//! If you are unfamiliar with the `termios` API, you should first read the
//! [API documentation](https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/termios.h.html) and
//! then come back to understand how `nix` safely wraps it.
//!
//! It should be noted that this API incurs some runtime overhead above the base `libc` definitions.
//! As this interface is not used with high-bandwidth information, this should be fine in most
//! cases. The primary cost when using this API is that the `Termios` datatype here duplicates the
//! standard fields of the underlying `termios` struct and uses safe type wrappers for those fields.
//! This means that when crossing the FFI interface to the underlying C library, data is first
//! copied into the underlying `termios` struct, then the operation is done, and the data is copied
//! back (with additional sanity checking) into the safe wrapper types. The `termios` struct is
//! relatively small across all platforms (on the order of 32-64 bytes).
//!
//! The following examples highlight some of the API use cases such that users coming from using C
//! or reading the standard documentation will understand how to use the safe API exposed here.
//!
//! Example disabling processing of the end-of-file control character:
//!
//! ```
//! # use self::nix::sys::termios::SpecialCharacterIndices::VEOF;
//! # use self::nix::sys::termios::{_POSIX_VDISABLE, Termios};
//! # let mut termios: Termios = unsafe { std::mem::zeroed() };
//! termios.control_chars[VEOF as usize] = _POSIX_VDISABLE;
//! ```
//!
//! The flags within `Termios` are defined as bitfields using the `bitflags` crate. This provides
//! an interface for working with bitfields that is similar to working with the raw unsigned
//! integer types but offers type safety because of the internal checking that values will always
//! be a valid combination of the defined flags.
//!
//! An example showing some of the basic operations for interacting with the control flags:
//!
//! ```
//! # use self::nix::sys::termios::{ControlFlags, Termios};
//! # let mut termios: Termios = unsafe { std::mem::zeroed() };
//! termios.control_flags & ControlFlags::CSIZE == ControlFlags::CS5;
//! termios.control_flags |= ControlFlags::CS5;
//! ```
//!
//! # Baud rates
//!
//! This API is not consistent across platforms when it comes to `BaudRate`: Android and Linux both
//! only support the rates specified by the `BaudRate` enum through their termios API while the BSDs
//! support arbitrary baud rates as the values of the `BaudRate` enum constants are the same integer
//! value of the constant (`B9600` == `9600`). Therefore the `nix::termios` API uses the following
//! conventions:
//!
//! * `cfgetispeed()` - Returns `u32` on BSDs, `BaudRate` on Android/Linux
//! * `cfgetospeed()` - Returns `u32` on BSDs, `BaudRate` on Android/Linux
//! * `cfsetispeed()` - Takes `u32` or `BaudRate` on BSDs, `BaudRate` on Android/Linux
//! * `cfsetospeed()` - Takes `u32` or `BaudRate` on BSDs, `BaudRate` on Android/Linux
//! * `cfsetspeed()` - Takes `u32` or `BaudRate` on BSDs, `BaudRate` on Android/Linux
//!
//! The most common use case of specifying a baud rate using the enum will work the same across
//! platforms:
//!
//! ```rust
//! # use nix::sys::termios::{BaudRate, cfsetispeed, cfsetospeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! cfsetispeed(&mut t, BaudRate::B9600);
//! cfsetospeed(&mut t, BaudRate::B9600);
//! cfsetspeed(&mut t, BaudRate::B9600);
//! # }
//! ```
//!
//! For convenience a cross-platform [`ArbitraryBaudRate`] is available that converts a `u32` to a `BaudRate`:
//!
//! ```rust
//! # use nix::sys::termios::{BaudRate, cfsetispeed, cfsetospeed, cfsetspeed, Termios, ArbitraryBaudRate};
//! # use std::convert::TryFrom;
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! cfsetispeed(&mut t, BaudRate::try_from(ArbitraryBaudRate(9600)).unwrap());
//! cfsetospeed(&mut t, BaudRate::try_from(ArbitraryBaudRate(9600)).unwrap());
//! cfsetspeed(&mut t, BaudRate::try_from(ArbitraryBaudRate(9600)).unwrap());
//! # }
//! ```
//!
//! Additionally round-tripping baud rates is consistent across platforms:
//!
//! ```rust
//! # use nix::sys::termios::{BaudRate, cfgetispeed, cfgetospeed, cfsetispeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! # cfsetspeed(&mut t, BaudRate::B9600);
//! let speed = cfgetispeed(&t);
//! assert_eq!(speed, cfgetospeed(&t));
//! cfsetispeed(&mut t, speed);
//! # }
//! ```
//!
//! On non-BSDs, `cfgetispeed()` and `cfgetospeed()` both return a `BaudRate`:
//!
#![cfg_attr(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                target_os = "macos", target_os = "netbsd", target_os = "openbsd"),
            doc = " ```rust,ignore")]
#![cfg_attr(not(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                    target_os = "macos", target_os = "netbsd", target_os = "openbsd")),
            doc = " ```rust")]
//! # use nix::sys::termios::{BaudRate, cfgetispeed, cfgetospeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! # cfsetspeed(&mut t, BaudRate::B9600);
//! assert_eq!(cfgetispeed(&t), BaudRate::B9600);
//! assert_eq!(cfgetospeed(&t), BaudRate::B9600);
//! # }
//! ```
//!
//! But on the BSDs, `cfgetispeed()` and `cfgetospeed()` both return `u32`s:
//!
#![cfg_attr(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                target_os = "macos", target_os = "netbsd", target_os = "openbsd"),
            doc = " ```rust")]
#![cfg_attr(not(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                    target_os = "macos", target_os = "netbsd", target_os = "openbsd")),
            doc = " ```rust,ignore")]
//! # use nix::sys::termios::{BaudRate, cfgetispeed, cfgetospeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! # cfsetspeed(&mut t, 9600u32);
//! assert_eq!(cfgetispeed(&t), 9600u32);
//! assert_eq!(cfgetospeed(&t), 9600u32);
//! # }
//! ```
//!
//! It's trivial to convert from a `BaudRate` to a `u32` on BSDs:
//!
#![cfg_attr(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                target_os = "macos", target_os = "netbsd", target_os = "openbsd"),
            doc = " ```rust")]
#![cfg_attr(not(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                    target_os = "macos", target_os = "netbsd", target_os = "openbsd")),
            doc = " ```rust,ignore")]
//! # use nix::sys::termios::{BaudRate, cfgetispeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! # cfsetspeed(&mut t, 9600u32);
//! assert_eq!(cfgetispeed(&t), BaudRate::B9600.into());
//! assert_eq!(u32::from(BaudRate::B9600), 9600u32);
//! # }
//! ```
//!
//! And on BSDs you can specify arbitrary baud rates (**note** this depends on hardware support)
//! by specifying baud rates directly using `u32`s:
//!
#![cfg_attr(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                target_os = "macos", target_os = "netbsd", target_os = "openbsd"),
            doc = " ```rust")]
#![cfg_attr(not(any(target_os = "freebsd", target_os = "dragonfly", target_os = "ios",
                    target_os = "macos", target_os = "netbsd", target_os = "openbsd")),
            doc = " ```rust,ignore")]
//! # use nix::sys::termios::{cfsetispeed, cfsetospeed, cfsetspeed, Termios};
//! # fn main() {
//! # let mut t: Termios = unsafe { std::mem::zeroed() };
//! cfsetispeed(&mut t, 9600u32);
//! cfsetospeed(&mut t, 9600u32);
//! cfsetspeed(&mut t, 9600u32);
//! # }
//! ```
use cfg_if::cfg_if;
use crate::Result;
use crate::errno::Errno;
use libc::{self, c_int, tcflag_t};
use std::cell::{Ref, RefCell};
use std::convert::From;
use std::mem;
use std::os::unix::io::RawFd;
use std::convert::TryFrom;

#[cfg(feature = "process")]
use crate::unistd::Pid;

/// Stores settings for the termios API
///
/// This is a wrapper around the `libc::termios` struct that provides a safe interface for the
/// standard fields. The only safe way to obtain an instance of this struct is to extract it from
/// an open port using `tcgetattr()`.
#[derive(Clone, Debug, Eq, PartialEq)]
pub struct Termios {
    inner: RefCell<libc::termios>,
    /// Input mode flags (see `termios.c_iflag` documentation)
    pub input_flags: InputFlags,
    /// Output mode flags (see `termios.c_oflag` documentation)
    pub output_flags: OutputFlags,
    /// Control mode flags (see `termios.c_cflag` documentation)
    pub control_flags: ControlFlags,
    /// Local mode flags (see `termios.c_lflag` documentation)
    pub local_flags: LocalFlags,
    /// Control characters (see `termios.c_cc` documentation)
    pub control_chars: [libc::cc_t; NCCS],
}

impl Termios {
    /// Exposes an immutable reference to the underlying `libc::termios` data structure.
    ///
    /// This is not part of `nix`'s public API because it requires additional work to maintain type
    /// safety.
    pub(crate) fn get_libc_termios(&self) -> Ref<libc::termios> {
        {
            let mut termios = self.inner.borrow_mut();
            termios.c_iflag = self.input_flags.bits();
            termios.c_oflag = self.output_flags.bits();
            termios.c_cflag = self.control_flags.bits();
            termios.c_lflag = self.local_flags.bits();
            termios.c_cc = self.control_chars;
        }
        self.inner.borrow()
    }

    /// Exposes the inner `libc::termios` datastore within `Termios`.
    ///
    /// This is unsafe because if this is used to modify the inner `libc::termios` struct, it will
    /// not automatically update the safe wrapper type around it. In this case it should also be
    /// paired with a call to `update_wrapper()` so that the wrapper-type and internal
    /// representation stay consistent.
    pub(crate) unsafe fn get_libc_termios_mut(&mut self) -> *mut libc::termios {
        {
            let mut termios = self.inner.borrow_mut();
            termios.c_iflag = self.input_flags.bits();
            termios.c_oflag = self.output_flags.bits();
            termios.c_cflag = self.control_flags.bits();
            termios.c_lflag = self.local_flags.bits();
            termios.c_cc = self.control_chars;
        }
        self.inner.as_ptr()
    }

    /// Updates the wrapper values from the internal `libc::termios` data structure.
    pub(crate) fn update_wrapper(&mut self) {
        let termios = *self.inner.borrow_mut();
        self.input_flags = InputFlags::from_bits_truncate(termios.c_iflag);
        self.output_flags = OutputFlags::from_bits_truncate(termios.c_oflag);
        self.control_flags = ControlFlags::from_bits_truncate(termios.c_cflag);
        self.local_flags = LocalFlags::from_bits_truncate(termios.c_lflag);
        self.control_chars = termios.c_cc;
    }
}

impl From<libc::termios> for Termios {
    fn from(termios: libc::termios) -> Self {
        Termios {
            inner: RefCell::new(termios),
            input_flags: InputFlags::from_bits_truncate(termios.c_iflag),
            output_flags: OutputFlags::from_bits_truncate(termios.c_oflag),
            control_flags: ControlFlags::from_bits_truncate(termios.c_cflag),
            local_flags: LocalFlags::from_bits_truncate(termios.c_lflag),
            control_chars: termios.c_cc,
        }
    }
}

impl From<Termios> for libc::termios {
    fn from(termios: Termios) -> Self {
        termios.inner.into_inner()
    }
}

libc_enum!{
    /// Baud rates supported by the system.
    ///
    /// For the BSDs, arbitrary baud rates can be specified by using `u32`s directly instead of this
    /// enum.
    ///
    /// B0 is special and will disable the port.
    #[cfg_attr(all(any(target_os = "ios", target_os = "macos"), target_pointer_width = "64"), repr(u64))]
    #[cfg_attr(not(all(any(target_os = "ios", target_os = "macos"), target_pointer_width = "64")), repr(u32))]
    #[non_exhaustive]
    pub enum BaudRate {
        B0,
        B50,
        B75,
        B110,
        B134,
        B150,
        B200,
        B300,
        B600,
        B1200,
        B1800,
        B2400,
        B4800,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B7200,
        B9600,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B14400,
        B19200,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B28800,
        B38400,
        B57600,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B76800,
        B115200,
        #[cfg(any(target_os = "illumos", target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B153600,
        B230400,
        #[cfg(any(target_os = "illumos", target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B307200,
        #[cfg(any(target_os = "android",
                  target_os = "freebsd",
                  target_os = "illumos",
                  target_os = "linux",
                  target_os = "netbsd",
                  target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B460800,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B500000,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B576000,
        #[cfg(any(target_os = "android",
                  target_os = "freebsd",
                  target_os = "illumos",
                  target_os = "linux",
                  target_os = "netbsd",
                  target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B921600,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B1000000,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B1152000,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B1500000,
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B2000000,
        #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B2500000,
        #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B3000000,
        #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B3500000,
        #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        B4000000,
    }
    impl TryFrom<libc::speed_t>
}

#[cfg(any(target_os = "freebsd",
          target_os = "dragonfly",
          target_os = "ios",
          target_os = "macos",
          target_os = "netbsd",
          target_os = "openbsd"))]
impl From<BaudRate> for u32 {
    fn from(b: BaudRate) -> u32 {
        b as u32
    }
}

/// Representation for arbitrary baud rates for systems that do not
/// otherwise support it.
///
/// ```rust
/// # use nix::sys::termios::{BaudRate, ArbitraryBaudRate};
/// # use std::convert::TryFrom;
/// assert_eq!(Ok(BaudRate::B9600), BaudRate::try_from(ArbitraryBaudRate(9600)));
/// ```
#[derive(Copy, Debug, Clone)]
pub struct ArbitraryBaudRate(pub u32);

impl TryFrom<ArbitraryBaudRate> for BaudRate {
    type Error = Errno;

    fn try_from(abr: ArbitraryBaudRate) -> Result<BaudRate> {
        use BaudRate::*;

        Ok(match abr.0 {
            0 => B0,
            50 => B50,
            75 => B75,
            110 => B110,
            134 => B134,
            150 => B150,
            200 => B200,
            300 => B300,
            600 => B600,
            1200 => B1200,
            1800 => B1800,
            2400 => B2400,
            4800 => B4800,
            #[cfg(any(target_os = "dragonfly",
                      target_os = "freebsd",
                      target_os = "macos",
                      target_os = "netbsd",
                      target_os = "openbsd"))]
            7200 => B7200,
            9600 => B9600,
            #[cfg(any(target_os = "dragonfly",
                      target_os = "freebsd",
                      target_os = "macos",
                      target_os = "netbsd",
                      target_os = "openbsd"))]
            14400 => B14400,
            19200 => B19200,
            #[cfg(any(target_os = "dragonfly",
                      target_os = "freebsd",
                      target_os = "macos",
                      target_os = "netbsd",
                      target_os = "openbsd"))]
            28800 => B28800,
            38400 => B38400,
            57600 => B57600,
            #[cfg(any(target_os = "dragonfly",
                      target_os = "freebsd",
                      target_os = "macos",
                      target_os = "netbsd",
                      target_os = "openbsd"))]
            76800 => B76800,
            115200 => B115200,
            #[cfg(any(target_os = "illumos", target_os = "solaris"))]
            153600 => B153600,
            230400 => B230400,
            #[cfg(any(target_os = "illumos", target_os = "solaris"))]
            307200 => B307200,
            #[cfg(any(target_os = "android",
                      target_os = "freebsd",
                      target_os = "illumos",
                      target_os = "linux",
                      target_os = "netbsd",
                      target_os = "solaris"))]
            460800 => B460800,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            500000 => B500000,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            576000 => B576000,
            #[cfg(any(target_os = "android",
                      target_os = "freebsd",
                      target_os = "illumos",
                      target_os = "linux",
                      target_os = "netbsd",
                      target_os = "solaris"))]
            921600 => B921600,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            1000000 => B1000000,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            1152000 => B1152000,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            1500000 => B1500000,
            #[cfg(any(target_os = "android", target_os = "linux"))]
            2000000 => B2000000,
            #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
            2500000 => B2500000,
            #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
            3000000 => B3000000,
            #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
            3500000 => B3500000,
            #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "sparc64"))))]
            4000000 => B4000000,
            _ => return Err(Errno::EINVAL),
        })
    }
}

// TODO: Add TCSASOFT, which will require treating this as a bitfield.
libc_enum! {
    /// Specify when a port configuration change should occur.
    ///
    /// Used as an argument to `tcsetattr()`
    #[repr(i32)]
    #[non_exhaustive]
    pub enum SetArg {
        /// The change will occur immediately
        TCSANOW,
        /// The change occurs after all output has been written
        TCSADRAIN,
        /// Same as `TCSADRAIN`, but will also flush the input buffer
        TCSAFLUSH,
    }
}

libc_enum! {
    /// Specify a combination of the input and output buffers to flush
    ///
    /// Used as an argument to `tcflush()`.
    #[repr(i32)]
    #[non_exhaustive]
    pub enum FlushArg {
        /// Flush data that was received but not read
        TCIFLUSH,
        /// Flush data written but not transmitted
        TCOFLUSH,
        /// Flush both received data not read and written data not transmitted
        TCIOFLUSH,
    }
}

libc_enum! {
    /// Specify how transmission flow should be altered
    ///
    /// Used as an argument to `tcflow()`.
    #[repr(i32)]
    #[non_exhaustive]
    pub enum FlowArg {
        /// Suspend transmission
        TCOOFF,
        /// Resume transmission
        TCOON,
        /// Transmit a STOP character, which should disable a connected terminal device
        TCIOFF,
        /// Transmit a START character, which should re-enable a connected terminal device
        TCION,
    }
}

// TODO: Make this usable directly as a slice index.
libc_enum! {
    /// Indices into the `termios.c_cc` array for special characters.
    #[repr(usize)]
    #[non_exhaustive]
    pub enum SpecialCharacterIndices {
        VDISCARD,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "illumos",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd",
                target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VDSUSP,
        VEOF,
        VEOL,
        VEOL2,
        VERASE,
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd",
                  target_os = "illumos",
                  target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VERASE2,
        VINTR,
        VKILL,
        VLNEXT,
        #[cfg(not(any(all(target_os = "linux", target_arch = "sparc64"),
                target_os = "illumos", target_os = "solaris")))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VMIN,
        VQUIT,
        VREPRINT,
        VSTART,
        #[cfg(any(target_os = "dragonfly",
                target_os = "freebsd",
                target_os = "illumos",
                target_os = "macos",
                target_os = "netbsd",
                target_os = "openbsd",
                target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VSTATUS,
        VSTOP,
        VSUSP,
        #[cfg(target_os = "linux")]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VSWTC,
        #[cfg(any(target_os = "haiku", target_os = "illumos", target_os = "solaris"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VSWTCH,
        #[cfg(not(any(all(target_os = "linux", target_arch = "sparc64"),
                target_os = "illumos", target_os = "solaris")))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VTIME,
        VWERASE,
        #[cfg(target_os = "dragonfly")]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VCHECKPT,
    }
}

#[cfg(any(all(target_os = "linux", target_arch = "sparc64"),
        target_os = "illumos", target_os = "solaris"))]
impl SpecialCharacterIndices {
    pub const VMIN: SpecialCharacterIndices = SpecialCharacterIndices::VEOF;
    pub const VTIME: SpecialCharacterIndices = SpecialCharacterIndices::VEOL;
}

pub use libc::NCCS;
#[cfg(any(target_os = "dragonfly",
          target_os = "freebsd",
          target_os = "linux",
          target_os = "macos",
          target_os = "netbsd",
          target_os = "openbsd"))]
#[cfg_attr(docsrs, doc(cfg(all())))]
pub use libc::_POSIX_VDISABLE;

libc_bitflags! {
    /// Flags for configuring the input mode of a terminal
    pub struct InputFlags: tcflag_t {
        IGNBRK;
        BRKINT;
        IGNPAR;
        PARMRK;
        INPCK;
        ISTRIP;
        INLCR;
        IGNCR;
        ICRNL;
        IXON;
        IXOFF;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        IXANY;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        IMAXBEL;
        #[cfg(any(target_os = "android", target_os = "linux", target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        IUTF8;
    }
}

libc_bitflags! {
    /// Flags for configuring the output mode of a terminal
    pub struct OutputFlags: tcflag_t {
        OPOST;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "linux",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        OLCUC;
        ONLCR;
        OCRNL as tcflag_t;
        ONOCR as tcflag_t;
        ONLRET as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        OFILL as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        OFDEL as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        NL0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        NL1 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CR0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CR1 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CR2 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CR3 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "freebsd",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        TAB0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        TAB1 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        TAB2 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "freebsd",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        TAB3 as tcflag_t;
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        XTABS;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        BS0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        BS1 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VT0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VT1 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        FF0 as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        FF1 as tcflag_t;
        #[cfg(any(target_os = "freebsd",
                  target_os = "dragonfly",
                  target_os = "ios",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        OXTABS;
        #[cfg(any(target_os = "freebsd",
                  target_os = "dragonfly",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        ONOEOT as tcflag_t;

        // Bitmasks for use with OutputFlags to select specific settings
        // These should be moved to be a mask once https://github.com/rust-lang-nursery/bitflags/issues/110
        // is resolved.

        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        NLDLY as tcflag_t; // FIXME: Datatype needs to be corrected in libc for mac
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CRDLY as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "freebsd",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        TABDLY as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        BSDLY as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        VTDLY as tcflag_t;
        #[cfg(any(target_os = "android",
                  target_os = "haiku",
                  target_os = "ios",
                  target_os = "linux",
                  target_os = "macos"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        FFDLY as tcflag_t;
    }
}

libc_bitflags! {
    /// Flags for setting the control mode of a terminal
    pub struct ControlFlags: tcflag_t {
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd",
                  target_os = "ios",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CIGNORE;
        CS5;
        CS6;
        CS7;
        CS8;
        CSTOPB;
        CREAD;
        PARENB;
        PARODD;
        HUPCL;
        CLOCAL;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CRTSCTS;
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CBAUD;
        #[cfg(any(target_os = "android", all(target_os = "linux", not(target_arch = "mips"))))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CMSPAR;
        #[cfg(any(target_os = "android",
                  all(target_os = "linux",
                      not(any(target_arch = "powerpc", target_arch = "powerpc64")))))]
        CIBAUD;
        #[cfg(any(target_os = "android", target_os = "linux"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CBAUDEX;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        MDMBUF;
        #[cfg(any(target_os = "netbsd", target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CHWFLOW;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CCTS_OFLOW;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CRTS_IFLOW;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CDTR_IFLOW;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CDSR_OFLOW;
        #[cfg(any(target_os = "dragonfly",
                  target_os = "freebsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        CCAR_OFLOW;

        // Bitmasks for use with ControlFlags to select specific settings
        // These should be moved to be a mask once https://github.com/rust-lang-nursery/bitflags/issues/110
        // is resolved.

        CSIZE;
    }
}

libc_bitflags! {
    /// Flags for setting any local modes
    pub struct LocalFlags: tcflag_t {
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        ECHOKE;
        ECHOE;
        ECHOK;
        ECHO;
        ECHONL;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        ECHOPRT;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        ECHOCTL;
        ISIG;
        ICANON;
        #[cfg(any(target_os = "freebsd",
                  target_os = "dragonfly",
                  target_os = "ios",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        ALTWERASE;
        IEXTEN;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        EXTPROC;
        TOSTOP;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        FLUSHO;
        #[cfg(any(target_os = "freebsd",
                  target_os = "dragonfly",
                  target_os = "ios",
                  target_os = "macos",
                  target_os = "netbsd",
                  target_os = "openbsd"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        NOKERNINFO;
        #[cfg(not(target_os = "redox"))]
        #[cfg_attr(docsrs, doc(cfg(all())))]
        PENDIN;
        NOFLSH;
    }
}

cfg_if!{
    if #[cfg(any(target_os = "freebsd",
                 target_os = "dragonfly",
                 target_os = "ios",
                 target_os = "macos",
                 target_os = "netbsd",
                 target_os = "openbsd"))] {
        /// Get input baud rate (see
        /// [cfgetispeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfgetispeed.html)).
        ///
        /// `cfgetispeed()` extracts the input baud rate from the given `Termios` structure.
        pub fn cfgetispeed(termios: &Termios) -> u32 {
            let inner_termios = termios.get_libc_termios();
            unsafe { libc::cfgetispeed(&*inner_termios) as u32 }
        }

        /// Get output baud rate (see
        /// [cfgetospeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfgetospeed.html)).
        ///
        /// `cfgetospeed()` extracts the output baud rate from the given `Termios` structure.
        pub fn cfgetospeed(termios: &Termios) -> u32 {
            let inner_termios = termios.get_libc_termios();
            unsafe { libc::cfgetospeed(&*inner_termios) as u32 }
        }

        /// Set input baud rate (see
        /// [cfsetispeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfsetispeed.html)).
        ///
        /// `cfsetispeed()` sets the intput baud rate in the given `Termios` structure.
        pub fn cfsetispeed<T: Into<u32>>(termios: &mut Termios, baud: T) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetispeed(inner_termios, baud.into() as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }

        /// Set output baud rate (see
        /// [cfsetospeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfsetospeed.html)).
        ///
        /// `cfsetospeed()` sets the output baud rate in the given termios structure.
        pub fn cfsetospeed<T: Into<u32>>(termios: &mut Termios, baud: T) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetospeed(inner_termios, baud.into() as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }

        /// Set both the input and output baud rates (see
        /// [termios(3)](https://www.freebsd.org/cgi/man.cgi?query=cfsetspeed)).
        ///
        /// `cfsetspeed()` sets the input and output baud rate in the given termios structure. Note that
        /// this is part of the 4.4BSD standard and not part of POSIX.
        pub fn cfsetspeed<T: Into<u32>>(termios: &mut Termios, baud: T) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetspeed(inner_termios, baud.into() as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }
    } else {
        use std::convert::TryInto;

        /// Get input baud rate (see
        /// [cfgetispeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfgetispeed.html)).
        ///
        /// `cfgetispeed()` extracts the input baud rate from the given `Termios` structure.
        pub fn cfgetispeed(termios: &Termios) -> BaudRate {
            let inner_termios = termios.get_libc_termios();
            unsafe { libc::cfgetispeed(&*inner_termios) }.try_into().unwrap()
        }

        /// Get output baud rate (see
        /// [cfgetospeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfgetospeed.html)).
        ///
        /// `cfgetospeed()` extracts the output baud rate from the given `Termios` structure.
        pub fn cfgetospeed(termios: &Termios) -> BaudRate {
            let inner_termios = termios.get_libc_termios();
            unsafe { libc::cfgetospeed(&*inner_termios) }.try_into().unwrap()
        }

        /// Set input baud rate (see
        /// [cfsetispeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfsetispeed.html)).
        ///
        /// `cfsetispeed()` sets the intput baud rate in the given `Termios` structure.
        pub fn cfsetispeed(termios: &mut Termios, baud: BaudRate) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetispeed(inner_termios, baud as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }

        /// Set output baud rate (see
        /// [cfsetospeed(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/cfsetospeed.html)).
        ///
        /// `cfsetospeed()` sets the output baud rate in the given `Termios` structure.
        pub fn cfsetospeed(termios: &mut Termios, baud: BaudRate) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetospeed(inner_termios, baud as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }

        /// Set both the input and output baud rates (see
        /// [termios(3)](https://www.freebsd.org/cgi/man.cgi?query=cfsetspeed)).
        ///
        /// `cfsetspeed()` sets the input and output baud rate in the given `Termios` structure. Note that
        /// this is part of the 4.4BSD standard and not part of POSIX.
        pub fn cfsetspeed(termios: &mut Termios, baud: BaudRate) -> Result<()> {
            let inner_termios = unsafe { termios.get_libc_termios_mut() };
            let res = unsafe { libc::cfsetspeed(inner_termios, baud as libc::speed_t) };
            termios.update_wrapper();
            Errno::result(res).map(drop)
        }
    }
}

/// Configures the port to something like the "raw" mode of the old Version 7 terminal driver (see
/// [termios(3)](https://man7.org/linux/man-pages/man3/termios.3.html)).
///
/// `cfmakeraw()` configures the termios structure such that input is available character-by-
/// character, echoing is disabled, and all special input and output processing is disabled. Note
/// that this is a non-standard function, but is available on Linux and BSDs.
pub fn cfmakeraw(termios: &mut Termios) {
    let inner_termios = unsafe { termios.get_libc_termios_mut() };
    unsafe {
        libc::cfmakeraw(inner_termios);
    }
    termios.update_wrapper();
}

/// Configures the port to "sane" mode (like the configuration of a newly created terminal) (see
/// [tcsetattr(3)](https://www.freebsd.org/cgi/man.cgi?query=tcsetattr)).
///
/// Note that this is a non-standard function, available on FreeBSD.
#[cfg(target_os = "freebsd")]
#[cfg_attr(docsrs, doc(cfg(all())))]
pub fn cfmakesane(termios: &mut Termios) {
    let inner_termios = unsafe { termios.get_libc_termios_mut() };
    unsafe {
        libc::cfmakesane(inner_termios);
    }
    termios.update_wrapper();
}

/// Return the configuration of a port
/// [tcgetattr(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcgetattr.html)).
///
/// `tcgetattr()` returns a `Termios` structure with the current configuration for a port. Modifying
/// this structure *will not* reconfigure the port, instead the modifications should be done to
/// the `Termios` structure and then the port should be reconfigured using `tcsetattr()`.
pub fn tcgetattr(fd: RawFd) -> Result<Termios> {
    let mut termios = mem::MaybeUninit::uninit();

    let res = unsafe { libc::tcgetattr(fd, termios.as_mut_ptr()) };

    Errno::result(res)?;

    unsafe { Ok(termios.assume_init().into()) }
}

/// Set the configuration for a terminal (see
/// [tcsetattr(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcsetattr.html)).
///
/// `tcsetattr()` reconfigures the given port based on a given `Termios` structure. This change
/// takes affect at a time specified by `actions`. Note that this function may return success if
/// *any* of the parameters were successfully set, not only if all were set successfully.
pub fn tcsetattr(fd: RawFd, actions: SetArg, termios: &Termios) -> Result<()> {
    let inner_termios = termios.get_libc_termios();
    Errno::result(unsafe { libc::tcsetattr(fd, actions as c_int, &*inner_termios) }).map(drop)
}

/// Block until all output data is written (see
/// [tcdrain(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcdrain.html)).
pub fn tcdrain(fd: RawFd) -> Result<()> {
    Errno::result(unsafe { libc::tcdrain(fd) }).map(drop)
}

/// Suspend or resume the transmission or reception of data (see
/// [tcflow(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcflow.html)).
///
/// `tcflow()` suspends of resumes the transmission or reception of data for the given port
/// depending on the value of `action`.
pub fn tcflow(fd: RawFd, action: FlowArg) -> Result<()> {
    Errno::result(unsafe { libc::tcflow(fd, action as c_int) }).map(drop)
}

/// Discard data in the output or input queue (see
/// [tcflush(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcflush.html)).
///
/// `tcflush()` will discard data for a terminal port in the input queue, output queue, or both
/// depending on the value of `action`.
pub fn tcflush(fd: RawFd, action: FlushArg) -> Result<()> {
    Errno::result(unsafe { libc::tcflush(fd, action as c_int) }).map(drop)
}

/// Send a break for a specific duration (see
/// [tcsendbreak(3p)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcsendbreak.html)).
///
/// When using asynchronous data transmission `tcsendbreak()` will transmit a continuous stream
/// of zero-valued bits for an implementation-defined duration.
pub fn tcsendbreak(fd: RawFd, duration: c_int) -> Result<()> {
    Errno::result(unsafe { libc::tcsendbreak(fd, duration) }).map(drop)
}

feature! {
#![feature = "process"]
/// Get the session controlled by the given terminal (see
/// [tcgetsid(3)](https://pubs.opengroup.org/onlinepubs/9699919799/functions/tcgetsid.html)).
pub fn tcgetsid(fd: RawFd) -> Result<Pid> {
    let res = unsafe { libc::tcgetsid(fd) };

    Errno::result(res).map(Pid::from_raw)
}
}

#[cfg(test)]
mod test {
    use super::*;
    use std::convert::TryFrom;

    #[test]
    fn try_from_speed_t() {
        assert_eq!(Ok(BaudRate::B0), BaudRate::try_from(libc::B0));
        assert!(BaudRate::try_from(999999999).is_err());
    }

    #[test]
    fn try_from_arbitrary_baud_rate() {
        assert_eq!(Ok(BaudRate::B9600), BaudRate::try_from(ArbitraryBaudRate(9600)));
        assert!(BaudRate::try_from(ArbitraryBaudRate(999999999)).is_err());
    }
}