This is a simple Arduino Pro Mini project with a small I2C OLED Display and a MPU-6050 accelerator+Gyroscop chip.
- switch between 15 Levels with Level 1 vor very sensitiv detection (press wake-up Button above 1s)
- Display sleep Mode
- Level 16 - wait for 20Sec to reset Steps to 0
- Start-Logo with Address hint
- Step Indicator LED (PIN 13)
- Clock (starts with 00:00:00 on Startup)
- Lipo Charging
- low cost (10EUR Aliexpress)
- Store Steps in eeprom every 1h, 1k Steps or Display off/sleep
