This document describes the procedure to upgrade openssl from 1.0.2a to 1.0.2c in io.js.
The openssl build system is based on the Configure perl script in
deps/openssl/openssl. For example, running Configure linux_x86-64
in the openssl repository generates Makefile and opensslconf.h for
the linux_x86_64 target architecture.
The Makefile contains the list of asm files which are generated by
perl scripts during build so that we can get the most of use of the
hardware performance according to the type of cpus.
Configure TABLE shows various build parameters that depend on each
os and arch.
In io.js, build target is defined as --dest-os and --dest-cpu in
configure options which are different from the one that is defined in
openssl and it's build system is gyp that is based on python,
therefore we cannot use the openssl build system directly.
In order to build openssl with gyp in iojs, files of opensslconf.h and asm are generated in advance for several supported platforms.
Here is a map table to show conf(opensslconf.h) and asm between the openssl target and configuration parameters of os and cpu in iojs. The tested platform in CI are also listed.
| --dest-os | --dest-cpu | conf | asm | openssl target | CI |
|---|---|---|---|---|---|
| linux | ia32 | o | o | linux-elf | o |
| linux | x32 | o | x(*2) | linux-x32 | x |
| linux | x64 | o | o | linux-x86_64 | o |
| linux | arm | o | o | linux-arm | o |
| linux | arm64 | o | o | linux-aarch64 | o |
| mac | ia32 | o | o | darwin-i386-cc | - |
| mac | x64 | o | o | darwin64-x86_64-cc | o |
| win | ia32 | o | o(*3) | VC-WIN32 | x |
| win | x64 | o | o | VC-WIN64A | o |
| solaris | ia32 | o | o | solaris-x86-gcc | o |
| solaris | x64 | o | o | solaris64-x86_64-gcc | o |
| freebsd | ia32 | o | o | BSD-x86 | o |
| freebsd | x64 | o | o | BSD-x86_64 | o |
| openbsd | ia32 | o | o | BSD-x86 | x |
| openbsd | x64 | o | o | BSD-x86_64 | x |
| others | ia32 | x(*1) | o | - | x |
| others | x64 | x(*1) | o | - | x |
| others | arm | x(*1) | o | - | x |
| others | arm64 | x(*1) | o | - | x |
| others | others | x(*1) | x(*2) | - | x |
- (*1) use linux-elf as a fallback configuration
- (*2) no-asm used
- (*3) currently masm (Microsoft Macro Assembler) is used but it's no longer supported in openssl. We need to move to use nasm or yasm.
All parameters such as sources, defines, cflags and others generated
in openssl Makefile are written down into deps/openssl/openssl.gypi.
The header file of deps/openssl/openssl/crypto/opensslconf.h are
generated by Configure and varies on each os and arch so that we
made a new deps/openssl/config/opensslconf.h, where it includes each
conf file from deps/openssl/config/archs/*/opensslconf.h by using
pre-defined compiler macros. This procedure can be processed
automatically with deps/openssl/config/Makefile
Assembler support is one of the key features in openssl, but asm files
are dynamically generated with
deps/openssl/openssl/crypto/*/asm/*.pl by perl during
build. Furthermore, these perl scripts check the version of assembler
and generate asm files according to the supported instructions in each
compiler.
Since perl is not a build requirement in iojs, they all should be
generated in advance and statically stored in the repository. We
provide two sets of asm files, one is asm_latest(avx2 and addx
supported) in deps/openssl/asm and the other asm_obsolete(without
avx1/2 and addx) in deps/openssl/asm_obsolute, which depends on
supported features in assemblers. Each directory has a Makefile
to generate asm files with perl scripts in openssl sources.
configure and gyp check the version of assemblers such as gnu
as(gas), llvm and Visual Studio. deps/openssl/openssl.gypi
determines what asm files should be used, in which the asm_latest
needs the version of gas >= 2.23, llvm >= 3.3 or MSVS_VERSION>='2012'
(ml64 >= 12) as defined in
https://github.com/openssl/openssl/blob/OpenSSL_1_0_2-stable/crypto/sha/asm/sha512-x86_64.pl#L112-L129,
otherwise asm_obsolete are used.
The following is the detail instruction steps how to upgrade openssl version from 1.0.2a to 1.0.2c in iojs.
Remove old openssl sources in deps/openssl/openssl .
Get original openssl sources from
https://www.openssl.org/source/openssl-1.0.2c.tar.gz and extract all
files into deps/openssl/openssl .
There are three kinds of private patches to be applied in openssl-1.0.2c.
-
The two fixes of assembly error on ia32 win32. masm is no longer supported in openssl. We should move to use nasm or yasm in future version of iojs.
-
The fix of openssl-cli built on win. Key press requirement of openssl-cli in win causes timeout failures of several tests.
-
A new
-no_rand_screenoption to openssl s_client. This makes test time of test-tls-server-verify be much faster.
all header files in deps/openssl/openssl/include/openssl/*.h are
symbolic links in the distributed release tar.gz. They cause issues in
Windows. They are copied from the real files of symlink origin into
the include directory. During installation, they also copied into
PREFIX/node/include by tools/install.py.
No change.
No change.
We provide two sets of asm files. One is for the latest assembler and the other is the older one.
This was made in deps/openssl/asm/Makefile
- Updated asm files for each platforms which are required in openssl-1.0.2c.
- Some perl files need CC and ASM envs. Added a check if these envs
exist. Followed asm files are to be generated with CC=gcc and
ASM=nasm on Linux. See
deps/openssl/openssl/crypto/sha/asm/sha512-x86_64.pl - Added new 32bit targets/rules with a sse2 flag (OPENSSL_IA32_SSE2) to generate asm for use SSE2.
- Generating sha512 asm files in x86_64 need output filename which has 512. Added new rules so as not to use stdout for outputs.
- PERLASM_SCHEME of linux-armv4 is
voidas defined in openssl Configure. Changed its target/rule and all directories are moved from arm-elf-gas to arm-void-gas. - add a new rule for armv8 asm generation
With export environments of CC=gcc and ASM=nasm, then type make command and check if new asm files are generated.
For older assembler, the version check of CC and ASM should be
skipped in generating asm file with perl scripts.
Copy files from deps/openssl/asm into
deps/openssl/asm/asm_obsolete and change rules to generate asm files
into this directories and remove the check of CC and ASM envs.
Without environments of CC and ASM, then type make command and check if new asm files for older compilers are generated.