You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hey guys, I came here to leave a report and solution for some problems nvflashk can cause, I have an Rtx 3070 pny with a reference PCB and I usually use 300w bios to try to get some records (but it lacks a good cpu) I decided to put the bios of 330w from PALIT! I was successful in recording the bios, but it didn't recognize the card correctly, so I tried to go back to my previous bios, a 350W Asus, but without success. I had several problems, the errors were basically that the EEPROM could not be read or written, the errors reported were:
Adapter not accessible or supported EEPROM not found skipping
Detecting GPU failed
Falcon reset control is disallowed
A system restart might be required before running the utility
I tried a lot of things including all versions of NVIDIA NVFlash, after a lot of trying I remembered that the ghostspectre win 11/10 lite installer has a CMD and it worked without any errors!!
Hope this helps some!! GOOD LUCK!!
The text was updated successfully, but these errors were encountered:
Hey guys, I came here to leave a report and solution for some problems nvflashk can cause, I have an Rtx 3070 pny with a reference PCB and I usually use 300w bios to try to get some records (but it lacks a good cpu) I decided to put the bios of 330w from PALIT! I was successful in recording the bios, but it didn't recognize the card correctly, so I tried to go back to my previous bios, a 350W Asus, but without success. I had several problems, the errors were basically that the EEPROM could not be read or written, the errors reported were:
Adapter not accessible or supported EEPROM not found skipping
Detecting GPU failed
Falcon reset control is disallowed
A system restart might be required before running the utility
I tried a lot of things including all versions of NVIDIA NVFlash, after a lot of trying I remembered that the ghostspectre win 11/10 lite installer has a CMD and it worked without any errors!!
Hope this helps some!! GOOD LUCK!!
The text was updated successfully, but these errors were encountered: