Only 1 node displayed for threadripper CPUs

[terroreek]

When using Zenmonitor it only displays the temps, voltages and from only one threadripper node.

the output from sensors
`zenpower-pci-00c3
Adapter: PCI adapter
SVI2_Core: +1.00 V
SVI2_SoC: +0.01 V
Tdie: +35.6°C (high = +70.0°C)
Tctl: +62.6°C
SVI2_P_Core: 60.27 W
SVI2_P_SoC: 0.00 W
SVI2_C_Core: +60.27 A
SVI2_C_SoC: +0.00 A

zenpower-pci-00cb
Adapter: PCI adapter
SVI2_Core: +1.36 V
SVI2_SoC: +0.01 V
Tdie: +33.9°C (high = +70.0°C)
Tctl: +60.9°C
SVI2_P_Core: 14.10 W
SVI2_P_SoC: 0.00 W
SVI2_C_Core: +11.43 A
SVI2_C_SoC: +0.00 A
`
what you see in zenmonitor

[ocerman]

Thanks for your report, I will look at it.

[ocerman]

@terroreek Commit 1d8cfab should fix that. Can you try it again?

[terroreek]

Yep working now!

[KeithMyers]

I just noticed. Don't know how I missed it. The labels for the Tdie and Tctrl Nodes are swapped for the correct values. Zenpower driver has them correct in sensors, but Zen Monitor does not.

The screen image in the previous post shows it too. Here is my screen shot.