generic_error.xml

<!-- IBM_PROLOG_BEGIN_TAG                                                   -->
<!-- This is an automatically generated prolog.                             -->
<!--                                                                        -->
<!-- $Source: src/import/generic/procedures/xml/error_info/generic_error.xml $ -->
<!--                                                                        -->
<!-- OpenPOWER sbe Project                                                  -->
<!--                                                                        -->
<!-- Contributors Listed Below - COPYRIGHT 2018,2019                        -->
<!-- [+] International Business Machines Corp.                              -->
<!--                                                                        -->
<!--                                                                        -->
<!-- Licensed under the Apache License, Version 2.0 (the "License");        -->
<!-- you may not use this file except in compliance with the License.       -->
<!-- You may obtain a copy of the License at                                -->
<!--                                                                        -->
<!--     http://www.apache.org/licenses/LICENSE-2.0                         -->
<!--                                                                        -->
<!-- Unless required by applicable law or agreed to in writing, software    -->
<!-- distributed under the License is distributed on an "AS IS" BASIS,      -->
<!-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        -->
<!-- implied. See the License for the specific language governing           -->
<!-- permissions and limitations under the License.                         -->
<!--                                                                        -->
<!-- IBM_PROLOG_END_TAG                                                     -->

<!-- -->
<!-- @file generic_error.xml -->
<!-- @brief Error xml for generic code -->
<!-- -->

<!-- *HWP HWP Owner: Andre Marin <aamarin@us.ibm.com> -->
<!-- *HWP HWP Backup: Stephen Glancy <sglancy@us.ibm.com> -->
<!-- *HWP Team: Memory -->
<!-- *HWP Level: 3 -->
<!-- *HWP Consumed by: HB:FSP -->
<!-- -->

<hwpErrors>

  <hwpError>
    <rc>RC_MSS_DIVIDE_BY_ZERO</rc>
    <description>
      Attempt to divide by zero
    </description>
    <ffdc>DIVISOR</ffdc>
    <ffdc>DIVIDEND</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_EMPTY_VECTOR</rc>
    <description>
      Empty vector conditional failed.
    </description>
    <ffdc>RECEIVED</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_CL_EXCEEDS_TAA_MAX</rc>
    <description>
        Calculated Cas Latency exceeds JEDEC value for TAA Max
        desired (and DIMM supported) cas_latency * proposed tck from mss freq attributes > jedec taa_max
        Probably due to MRW/ VPD freqs being too high
    </description>
    <ffdc>CAS_LATENCY</ffdc>
    <ffdc>TCK</ffdc>
    <ffdc>TAA_MAX</ffdc>
    <ffdc>COMPARE</ffdc>
    <ffdc>IS_3DS</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_FAILED_TO_FIND_SUPPORTED_CL</rc>
    <description>
      Desired CAS latency isn't supported in the common CAS latency bin retrieved from SPD.
    </description>
    <ffdc>DESIRED_CAS_LATENCY</ffdc>
    <ffdc>COMMON_CLS</ffdc>
    <ffdc>TAA</ffdc>
    <ffdc>TCK</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
    <gard>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </gard>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_INVALID_CALCULATED_TCK</rc>
    <description>
        Invalid value clock period (less than equal 0).
        Should be code bug and error comparing MRW and VPD SUPPRTED_FREQS
        Caused by bad MRW values for MSS_MRW_SUPPORTED_FREQ
    </description>
    <ffdc>TAAMIN</ffdc>
    <ffdc>PROPOSED_TCK</ffdc>
    <ffdc>IS_3DS</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_NO_COMMON_SUPPORTED_CL</rc>
    <description>
        Current Configuration has no common supported CL values.
        Caused by bad SPD on one of the plugged DIMMS
        or DIMM configuration is not supported
    </description>
    <ffdc>MC_TYPE</ffdc>
    <ffdc>CL_SUPPORTED</ffdc>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
    <gard>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </gard>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_SELECTED_FREQ_NOT_SUPPORTED</rc>
    <description>Selected freq based on calculations from the DIMM and VPD is not supported</description>
    <ffdc>SUPPORTED_FREQ_0</ffdc>
    <ffdc>SUPPORTED_FREQ_1</ffdc>
    <ffdc>SUPPORTED_FREQ_2</ffdc>
    <ffdc>SUPPORTED_FREQ_3</ffdc>
    <ffdc>FREQ</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
     <callout>
        <childTargets>
          <parent>TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
        </childTargets>
        <priority>MEDIUM</priority>
     </callout>
  </hwpError>

<hwpError>
  <rc>RC_MSS_INVALID_CLOCK_PERIOD</rc>
  <description>
    An invalid clock period was passed to clock period to frequency
  </description>
  <ffdc>CLOCK_PERIOD</ffdc>
  <callout>
    <procedure>CODE</procedure>
    <priority>HIGH</priority>
  </callout>
</hwpError>

<hwpError>
  <rc>RC_MSS_INVALID_FREQUENCY</rc>
  <description>
    An invalid frequency was passed to frequency to clock period
  </description>
  <ffdc>FREQ</ffdc>
  <callout>
    <procedure>CODE</procedure>
    <priority>HIGH</priority>
  </callout>
</hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_PORT_INDEX_PASSED</rc>
    <description>An invalid port index was passed into an MSS function</description>
    <ffdc>INDEX</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_TIMING_VALUE</rc>
    <description>Invalid value calculated for timing value based on MTB and FTB from SPD.</description>
    <ffdc>VALUE</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <gard>
        <target>DIMM_TARGET</target>
    </gard>
  </hwpError>

<hwpError>
  <rc>RC_MSS_LOOKUP_FAILED</rc>
  <description>
    Conditional that tests whether a certain key value is located in a map.
  </description>
  <ffdc>KEY</ffdc>
  <ffdc>DATA</ffdc>
  <ffdc>FUNCTION</ffdc>
  <callout>
    <target>TARGET</target>
    <priority>MEDIUM</priority>
  </callout>
  <deconfigure>
    <target>TARGET</target>
  </deconfigure>
</hwpError>

  <hwpError>
    <rc>RC_MSS_VOLT_WRONG_NUMBER_OF_VOLTAGES</rc>
    <description>Incorrect number of voltages supplied to set_voltage_attributes function</description>
    <ffdc>VOLT_TARGET</ffdc>
    <ffdc>SUPPLIED_NUMBER</ffdc>
    <ffdc>EXPECTED_NUMBER</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_VOLT_DDR_TYPE_REQUIRED_VOLTAGE</rc>
    <description>One or more DIMMs do not support required voltage for DDR type.</description>
    <ffdc>EXPECTED_OPERABLE</ffdc>
    <ffdc>EXPECTED_ENDURANT</ffdc>
    <ffdc>ACTUAL_OPERABLE</ffdc>
    <ffdc>ACTUAL_ENDURANT</ffdc>
   <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_PORT_DOES_NOT_SUPPORT_MAJORITY_FREQ</rc>
    <description>
      When considering the frequencies in the MRW and the max supported
      frequencies based on DIMM config, the indicated port's DIMM do not support
      the frequency of the majority of other ports' DIMM, so it will be deconfigured
    </description>
    <ffdc>FREQ_TARGET</ffdc>
    <ffdc>PORT_TARGET</ffdc>
    <ffdc>FREQUENCY</ffdc>
     <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_UNEXPECTED_VALUE_SEEN</rc>
    <description> Invalid value seen versus the expected value wanted </description>
    <ffdc>TARGET</ffdc>
    <ffdc>EXPECTED</ffdc>
    <ffdc>ACTUAL</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_OUT_OF_BOUNDS_INDEXING</rc>
    <description>
      Desired index is larger than list (std::vector, array, etc.) size.
      Likely a programming error.
    </description>
    <ffdc>TARGET</ffdc>
    <ffdc>INDEX</ffdc>
    <ffdc>LIST_SIZE</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_CONVERSION_ERROR</rc>
    <description>
      Overflow or underflow occured converting one integral type to another.
      This is a programming error.
    </description>
    <ffdc>TARGET</ffdc>
    <ffdc>ORIGINAL_VAL</ffdc>
    <ffdc>CONVERTED_VAL</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FAILED_DATA_INTEGRITY_CHECK</rc>
    <description>
        Bad data received.
        Settings are incorrect for received data.
        This could be code problem (decoding) or bad data.
    </description>
    <ffdc>VALUE</ffdc>
    <ffdc>BYTE</ffdc>
    <ffdc>FFDC_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

</hwpErrors>