generic_error.xml

<!-- IBM_PROLOG_BEGIN_TAG                                                   -->
<!-- This is an automatically generated prolog.                             -->
<!--                                                                        -->
<!-- $Source: src/import/generic/procedures/xml/error_info/generic_error.xml $ -->
<!--                                                                        -->
<!-- OpenPOWER sbe Project                                                  -->
<!--                                                                        -->
<!-- Contributors Listed Below - COPYRIGHT 2018,2019                        -->
<!-- [+] International Business Machines Corp.                              -->
<!--                                                                        -->
<!--                                                                        -->
<!-- Licensed under the Apache License, Version 2.0 (the "License");        -->
<!-- you may not use this file except in compliance with the License.       -->
<!-- You may obtain a copy of the License at                                -->
<!--                                                                        -->
<!--     http://www.apache.org/licenses/LICENSE-2.0                         -->
<!--                                                                        -->
<!-- Unless required by applicable law or agreed to in writing, software    -->
<!-- distributed under the License is distributed on an "AS IS" BASIS,      -->
<!-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        -->
<!-- implied. See the License for the specific language governing           -->
<!-- permissions and limitations under the License.                         -->
<!--                                                                        -->
<!-- IBM_PROLOG_END_TAG                                                     -->

<!-- -->
<!-- @file generic_error.xml -->
<!-- @brief Error xml for generic code -->
<!-- -->

<!-- *HWP HWP Owner: Andre Marin <aamarin@us.ibm.com> -->
<!-- *HWP HWP Backup: Stephen Glancy <sglancy@us.ibm.com> -->
<!-- *HWP Team: Memory -->
<!-- *HWP Level: 3 -->
<!-- *HWP Consumed by: HB:FSP -->
<!-- -->

<hwpErrors>

  <hwpError>
    <rc>RC_MSS_DIVIDE_BY_ZERO</rc>
    <description>
      Attempt to divide by zero
    </description>
    <ffdc>DIVISOR</ffdc>
    <ffdc>DIVIDEND</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_EMPTY_VECTOR</rc>
    <description>
      Empty vector conditional failed.
    </description>
    <ffdc>RECEIVED</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FAILED_SPD_REVISION_FALLBACK</rc>
    <description>
      Unable to fall back SPD decoder to the highest decoded
      revision. Most likely a programming error.
    </description>
    <ffdc>FAILED_REVISION</ffdc>
    <ffdc>FUNCTION_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FAILED_TO_FIND_TRFC</rc>
    <description>
        Unable to find tRFC (ps) from map with SDRAM density key
    </description>
    <ffdc>SDRAM_DENSITY</ffdc>
    <ffdc>REFRESH_MODE</ffdc>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_CL_EXCEEDS_TAA_MAX</rc>
    <description>
        Calculated Cas Latency exceeds JEDEC value for TAA Max
        desired (and DIMM supported) cas_latency * proposed tck from mss freq attributes > jedec taa_max
        Probably due to MRW/ VPD freqs being too high
    </description>
    <ffdc>CAS_LATENCY</ffdc>
    <ffdc>TCK</ffdc>
    <ffdc>TAA_MAX</ffdc>
    <ffdc>COMPARE</ffdc>
    <ffdc>IS_3DS</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_FAILED_TO_FIND_SUPPORTED_CL</rc>
    <description>
      Desired CAS latency isn't supported in the common CAS latency bin retrieved from SPD.
    </description>
    <ffdc>DESIRED_CAS_LATENCY</ffdc>
    <ffdc>COMMON_CLS</ffdc>
    <ffdc>TAA</ffdc>
    <ffdc>TCK</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
    <gard>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </gard>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_INDEX_TOO_LARGE</rc>
    <description>Error calculating the index into max_freq array</description>
    <ffdc>INDEX</ffdc>
    <ffdc>NUM_MAX_FREQS</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_INVALID_CALCULATED_TCK</rc>
    <description>
        Invalid value clock period (less than equal 0).
        Should be code bug and error comparing MRW and VPD SUPPRTED_FREQS
        Caused by bad MRW values for MSS_MRW_SUPPORTED_FREQ
    </description>
    <ffdc>TAAMIN</ffdc>
    <ffdc>PROPOSED_TCK</ffdc>
    <ffdc>IS_3DS</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_NO_COMMON_SUPPORTED_CL</rc>
    <description>
        Current Configuration has no common supported CL values.
        Caused by bad SPD on one of the plugged DIMMS
        or DIMM configuration is not supported
    </description>
    <ffdc>MC_TYPE</ffdc>
    <ffdc>CL_SUPPORTED</ffdc>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
    <gard>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </gard>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FREQ_SELECTED_FREQ_NOT_SUPPORTED</rc>
    <description>Selected freq based on calculations from the DIMM and VPD is not supported</description>
    <ffdc>SUPPORTED_FREQ_0</ffdc>
    <ffdc>SUPPORTED_FREQ_1</ffdc>
    <ffdc>SUPPORTED_FREQ_2</ffdc>
    <ffdc>SUPPORTED_FREQ_3</ffdc>
    <ffdc>FREQ</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
     <callout>
        <childTargets>
          <parent>TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
        </childTargets>
        <priority>MEDIUM</priority>
     </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_CAST_CALC_NCK</rc>
    <description>Invalid cast or calculation for calc_nck</description>
    <ffdc>TIMING_PS</ffdc>
    <ffdc>NCK_NS</ffdc>
    <ffdc>CORRECTION_FACTOR</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

<hwpError>
  <rc>RC_MSS_INVALID_CLOCK_PERIOD</rc>
  <description>
    An invalid clock period was passed to clock period to frequency
  </description>
  <ffdc>CLOCK_PERIOD</ffdc>
  <callout>
    <procedure>CODE</procedure>
    <priority>HIGH</priority>
  </callout>
</hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_DB_MDQ_DRIVE_STRENGTH</rc>
    <description>
        Bad SPD data for bytes 145 - 147.
        Reserved settings for data buffer MDQ drive strength received.
        This could be code problem (decoding) or bad SPD.
    </description>
    <ffdc>DATA_RATE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_DIMM_SPEED</rc>
    <description>
      Invalid DIMM speed received. Possibly a programming error.
    </description>
    <ffdc>DIMM_SPEED</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_DIMM_TYPE</rc>
    <description>
      Received a DIMM type unsupported by the SPD decoder factory
    </description>
    <ffdc>DIMM_TYPE</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>LOW</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_DRAM_GEN</rc>
    <description>
      Received a DRAM gen unsupported by the SPD decoder factory
    </description>
    <ffdc>DRAM_GEN</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>LOW</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_FREQ_PASSED_IN</rc>
    <description>
        An invalid Freq value has been set
    </description>
    <ffdc>FREQ</ffdc>
    <ffdc>FUNCTION</ffdc>
    <ffdc>DIMM_TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_FREQUENCY</rc>
    <description>
      An invalid frequency was passed to frequency to clock period
    </description>
    <ffdc>FREQ</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_FREQ_LIST_PASSED</rc>
    <description>
       Wrong size vector passed into frequency scoreboard function
    </description>
    <ffdc>SIZE</ffdc>
    <ffdc>EXPECTED</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_FINE_REFRESH_MODE</rc>
    <description>
      Invalid fine refresh mode received from the mrw
    </description>
    <ffdc>FINE_REF_MODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_HYBRID_MODULE</rc>
    <description>
      Received an invalid or unsupported hybrid media (SPD byte 3, bits [6:4])
      for a specified hybrid modue (SPD byte 3, bit [7])
    </description>
    <ffdc>HYBRID</ffdc>
    <ffdc>HYBRID_MEDIA</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>LOW</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_PORT_INDEX_PASSED</rc>
    <description>An invalid port index was passed into an MSS function</description>
    <ffdc>INDEX</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_RANK</rc>
    <description>
      Invalid rank passed into function
    </description>
    <ffdc>FUNCTION</ffdc>
    <ffdc>RANK</ffdc>
    <ffdc>PORT_TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_REFRESH_RATE_REQUEST</rc>
    <description>
      Invalid refresh request rate received.
      Possibly due to bad MRW setting for ATTR_MSS_MRW_REFRESH_RATE_REQUEST.
    </description>
    <ffdc>REFRESH_RATE_REQUEST</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_SPD_PARAMETER_RECEIVED</rc>
    <description>
      Unable to fall back SPD decoder to the highest decoded
      revision. Most likely a programming error.
    </description>
    <ffdc>SPD_PARAM</ffdc>
    <ffdc>FUNCTION_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_SPD_RANK</rc>
    <description>
      Invalid rank passed into attribute engine.
      May be due to problem in SPD.
    </description>
    <ffdc>FUNCTION</ffdc>
    <ffdc>RANK</ffdc>
    <ffdc>TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_SPD_RESERVED_BITS</rc>
    <description>
        Invalid SPD reserved bits received.
        This could be code problem (decoding) or bad SPD.
    </description>
    <ffdc>FUNCTION_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_TIMING_VALUE</rc>
    <description>Invalid value calculated for timing value based on MTB and FTB from SPD.</description>
    <ffdc>VALUE</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <gard>
        <target>DIMM_TARGET</target>
    </gard>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_VPD_FREQ_LIST_PASSED</rc>
    <description>
       Wrong size vector passed into limit_freq_by_vpd function
    </description>
    <ffdc>SIZE</ffdc>
    <ffdc>EXPECTED</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_VPD_KEYWORD_MAX</rc>
    <description>
      VPD keyword is too big for space allocated for it.
    </description>
    <ffdc>MAX</ffdc>
    <ffdc>ACTUAL</ffdc>
    <ffdc>KEYWORD</ffdc>
    <callout>
      <hw>
        <hwid>VPD_PART</hwid>
        <refTarget>VPD_TARGET</refTarget>
      </hw>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

<hwpError>
  <rc>RC_MSS_LOOKUP_FAILED</rc>
  <description>
    Conditional that tests whether a certain key value is located in a map.
  </description>
  <ffdc>KEY</ffdc>
  <ffdc>DATA</ffdc>
  <ffdc>FUNCTION</ffdc>
  <callout>
    <target>TARGET</target>
    <priority>MEDIUM</priority>
  </callout>
  <deconfigure>
    <target>TARGET</target>
  </deconfigure>
</hwpError>

  <hwpError>
    <rc>RC_MSS_MEMDIAGS_NO_MCBIST_SUBTESTS</rc>
    <description>Attempt to run an MCBIST program with no subtests</description>
    <ffdc>MC_TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_MCBIST_INCORRECT_PATTERN_LENGTH</rc>
    <description>MCBIST pattern has an incorrect length</description>
    <ffdc>TARGET</ffdc>
    <ffdc>ACTUAL</ffdc>
    <ffdc>EXPECTED</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_VOLT_WRONG_NUMBER_OF_VOLTAGES</rc>
    <description>Incorrect number of voltages supplied to set_voltage_attributes function</description>
    <ffdc>VOLT_TARGET</ffdc>
    <ffdc>SUPPLIED_NUMBER</ffdc>
    <ffdc>EXPECTED_NUMBER</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_VOLT_DDR_TYPE_REQUIRED_VOLTAGE</rc>
    <description>One or more DIMMs do not support required voltage for DDR type.</description>
    <ffdc>EXPECTED_OPERABLE</ffdc>
    <ffdc>EXPECTED_ENDURANT</ffdc>
    <ffdc>ACTUAL_OPERABLE</ffdc>
    <ffdc>ACTUAL_ENDURANT</ffdc>
   <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_PORT_DOES_NOT_SUPPORT_MAJORITY_FREQ</rc>
    <description>
      When considering the frequencies in the MRW and the max supported
      frequencies based on DIMM config, the indicated port's DIMM do not support
      the frequency of the majority of other ports' DIMM in the frequency domain.
      DIMM on the offending port will be deconfigured so the IPL can continue.
      All DIMM in the offending port's frequency domain will be marked as
      Hardware Callout.
    </description>
    <ffdc>FREQ_TARGET</ffdc>
    <ffdc>PORT_TARGET</ffdc>
    <ffdc>FREQUENCY</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>FREQ_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_UNEXPECTED_VALUE_SEEN</rc>
    <description> Invalid value seen versus the expected value wanted </description>
    <ffdc>TARGET</ffdc>
    <ffdc>EXPECTED</ffdc>
    <ffdc>ACTUAL</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_OUT_OF_BOUNDS_INDEXING</rc>
    <description>
      Desired index is larger than list (std::vector, array, etc.) size.
      Likely a programming error.
    </description>
    <ffdc>TARGET</ffdc>
    <ffdc>INDEX</ffdc>
    <ffdc>LIST_SIZE</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_CONVERSION_ERROR</rc>
    <description>
      Overflow or underflow occured converting one integral type to another.
      This is a programming error.
    </description>
    <ffdc>TARGET</ffdc>
    <ffdc>ORIGINAL_VAL</ffdc>
    <ffdc>CONVERTED_VAL</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>LOW</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_FAILED_DATA_INTEGRITY_CHECK</rc>
    <description>
        Bad data received.
        Settings are incorrect for received data.
        This could be code problem (decoding) or bad data.
    </description>
    <ffdc>TARGET</ffdc>
    <ffdc>VALUE</ffdc>
    <ffdc>BYTE</ffdc>
    <ffdc>FFDC_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_ZERO_FREQ_OR_SIZE</rc>
    <description>
      An zero memory frequency was passed to calculate min cmd gap
    </description>
    <ffdc>FREQ</ffdc>
    <ffdc>SIZE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_MEMDIAGS_INVALID_PATTERN_INDEX</rc>
    <description>An invalid pattern index was passed to the pattern loader</description>
    <ffdc>INDEX</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_MCBIST_PROGRAM_TOO_BIG</rc>
    <description>MCBIST program larger than currently supported size</description>
    <ffdc>PROGRAM_LENGTH</ffdc>
    <ffdc>TARGET</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_MCBIST_INVALID_ADDRESS_PAIR_INDEX</rc>
    <description>An invalid address pair index</description>
    <ffdc>INDEX</ffdc>
    <ffdc>MC_TYPE</ffdc>
    <ffdc>TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_INTERCEPT_NOT_SET</rc>
    <description>
      The attribute ATTR_MSS_TOTAL_POWER_INTERCEPT was not set and equals 0
    </description>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_SLOPE_NOT_SET</rc>
    <description>
      The attribute ATTR_MSS_TOTAL_POWER_INTERCEPT was not set and equals 0
    </description>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_NO_DATABUS_UTILIZATION</rc>
    <description>
      There are 2 DIMMS on the port but both have 0 databus utilization
    </description>
    <ffdc>PORT_DATABUS_UTIL</ffdc>
    <ffdc>DIMM_COUNT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_CALC_POWER_CURVE_DIVIDE_BY_ZERO</rc>
    <description>
      Denominator equals 0
    </description>
    <ffdc>PORT_DATABUS_UTIL</ffdc>
    <ffdc>UTIL_CONVERSION</ffdc>
    <ffdc>IDLE_UTIL</ffdc>
    <ffdc>RESULT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

 <hwpError>
    <rc>RC_MSS_NO_PORT_POWER_LIMIT</rc>
    <description>
        Got 0 when calculating port power limit.
        Either no dimms or attribute MEM_WATT_TARGET wasn't set
    </description>
    <ffdc>COUNT_DIMMS</ffdc>
    <ffdc>PORT_POWER_LIMIT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

 <hwpError>
    <rc>RC_MSS_NO_PORT_POWER</rc>
    <description>
        Got 0 when calculating port power limits using the DIMMs databus utilization
    </description>
    <ffdc>COUNT_DIMMS</ffdc>
    <ffdc>MAX_UTILIZATION_DIMM_0</ffdc>
    <ffdc>MAX_UTILIZATION_DIMM_1</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

 <hwpError>
    <rc>RC_MSS_M_DRAM_CLOCKS_EQUALS_ZERO</rc>
    <description>
        ATTR_MSS_MRW_MEM_M_DRAM_CLOCKS was not set and equals zero
    </description>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

  <hwpError>
    <rc>RC_MSS_MAX_FREQ_ATTR_SIZE_CHANGED</rc>
    <description>
        Number of entries for MSS_MRW_MAX_FREQ attribute from VPD has changed without updating the code
        Asserted because direct accesses to array
    </description>
    <ffdc>ACTUAL_SIZE</ffdc>
    <ffdc>SUPPOSED_SIZE</ffdc>
    <ffdc>PORT_TARGET</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

 <hwpError>
    <rc>RC_MSS_CALC_PORT_POWER_EXCEEDS_MAX</rc>
    <description>
      The calculated port power from equalizing throttles exceeds the maximum allowed power
    </description>
    <ffdc>CALCULATED_PORT_POWER</ffdc>
    <ffdc>MAX_POWER_ALLOWED</ffdc>
    <ffdc>PORT_POS</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
       <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
      </childTargets>
    </deconfigure>
 </hwpError>

  <hwpError>
    <rc>RC_MSS_SPD_REV_ENCODING_LEVEL_NOT_SUPPORTED</rc>
    <description>
      SPD revision on byte 1 (bits 7~4) has a unsupported encoding level
      that is greater than the largest decoded SPD decoder. There is
      no backward compatible revision to fallback to.  This could be
      bad SPD or a programming error.
    </description>
    <ffdc>ENCODING_LEVEL</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_SPD_TIMING_FAIL</rc>
    <description>
      Timing SPD parameter failed to meet JEDEC SPD timing
      bounds.  FUNCTION_CODE ffdc field encodes which timing param.
    </description>
    <ffdc>FAILED_REVISION</ffdc>
    <ffdc>FUNCTION_CODE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <callout>
      <target>TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_TOO_MANY_DIMMS_ON_PORT</rc>
    <description>There seem to be too many dimms on the port</description>
    <ffdc>DIMM_COUNT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
        <childTargets>
          <parent>PORT_TARGET</parent>
          <childType>TARGET_TYPE_DIMM</childType>
        </childTargets>
        <priority>MEDIUM</priority>
    </callout>
  </hwpError>

 <hwpError>
    <rc>RC_MSS_SLOT_UTIL_EXCEEDS_PORT</rc>
    <description>
      The memory throttle per slot (DIMM) exceeds the allowed throttle for the port
    </description>
    <ffdc>SLOT_UTIL</ffdc>
    <ffdc>PORT_UTIL</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

 <hwpError>
     <rc>RC_MSS_OUTPUT_OVERFLOW_CALC_UTIL</rc>
    <description>
        Type of output variable is not large enough for the calculations
    </description>
    <ffdc>RESULT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
 </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_THERMAL_DECODE_ERROR</rc>
    <description>
      There was no match or value found in decoding the power thermal attributes
    </description>
    <ffdc>DIMM_TARGET</ffdc>
    <ffdc>ATTR</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_MRW_SAFEMODE_UTIL_THROTTLE_NOT_SUPPORTED</rc>
    <description>
        The MRW safemode utilization that is less than the minimum utilization supported.  Check ATTR_MSS_MRW_SAFEMODE_DRAM_DATABUS_UTIL.
    </description>
    <ffdc>MRW_SAFEMODE_UTIL</ffdc>
    <ffdc>MIN_UTIL_VALUE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_NO_POWER_THERMAL_ATTR_FOUND</rc>
    <description>
      There was no match or value found in decoding the power thermal attributes
    </description>
    <ffdc>GENERATED_KEY</ffdc>
    <ffdc>FUNCTION</ffdc>
    <ffdc>DIMM_TARGET</ffdc>
    <ffdc>SIZE</ffdc>
    <ffdc>DRAM_GEN</ffdc>
    <ffdc>DIMM_TYPE</ffdc>
    <ffdc>DRAM_WIDTH</ffdc>
    <ffdc>DRAM_DENSITY</ffdc>
    <ffdc>STACK_TYPE</ffdc>
    <ffdc>MFGID</ffdc>
    <ffdc>MODULE_HEIGHT</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_THERMAL_ENCODE_ERROR</rc>
    <description>
      There was no match or value found in encoding the power thermal attributes
    </description>
    <ffdc>DIMM_TARGET</ffdc>
    <ffdc>ATTR</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_THERMAL_ATTR_VECTORS_INCORRECT</rc>
    <description>
      The attributes vectors size is incorrect for find_xxx functions
    </description>
    <ffdc>FUNCTION</ffdc>
    <ffdc>INPUT_SIZE</ffdc>
    <ffdc>EXPECTED_SIZE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_POWER_THERMAL_DIMM_INDEX_OUT_OF_BOUND</rc>
    <description>
      The dimm index is out of bound for the port
    </description>
    <ffdc>INPUT_SIZE</ffdc>
    <ffdc>MAX_SIZE</ffdc>
    <callout>
      <procedure>CODE</procedure>
      <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_TOO_MANY_PRIMARY_RANKS_ON_DIMM</rc>
    <description>
        Too many primary ranks were seen on the dimm according
        to the call to master_ranks_per_dimm</description>
    <ffdc>RANK_COUNT</ffdc>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_TOO_MANY_PRIMARY_RANKS_ON_PORT</rc>
    <description>
        Too many primary ranks were seen on the port according
        to the call to master_ranks_per_dimm</description>
    <callout>
      <target>PORT_TARGET</target>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>PORT_TARGET</target>
    </deconfigure>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_RANK_OUT_OF_RANGE</rc>
    <description>
        The rank provided to the rank::info constructor exceeded
        the maximum rank for the MC
    </description>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
    <ffdc>TARGET</ffdc>
    <ffdc>RANK</ffdc>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_GALOIS_TO_SYMBOL</rc>
    <description> An invalid galois code was found</description>
    <ffdc>GALOIS</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_SYMBOL_FOR_GALOIS</rc>
    <description> An invalid symbol was passed to symbol_to_galois</description>
    <ffdc>SYMBOL</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
      <rc>RC_MSS_INVALID_DQ_TO_SYMBOL</rc>
    <description> An invalid DQ bit index received to map to Galois symbol</description>
    <ffdc>DQ</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
      <rc>RC_MSS_INVALID_SYMBOL_TO_DQ</rc>
    <description> An invalid symbol received to map to DQ bit index</description>
    <ffdc>SYMBOL</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_RANK_PASSED</rc>
    <description> An invalid rank was passed to ecc::read function</description>
    <ffdc>RANK</ffdc>
    <ffdc>FUNCTION</ffdc>
    <ffdc>TARGET</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_INDEX_PASSED</rc>
    <description> An invalid index was passed to MODAL_SYMBOL_COUNT function</description>
    <ffdc>INDEX</ffdc>
    <ffdc>FUNCTION</ffdc>
    <callout>
        <procedure>CODE</procedure>
        <priority>HIGH</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_DRAM_WIDTH</rc>
    <description>
        Code only supports x4 and x8 drams at this time
    </description>
    <ffdc>DRAM_WIDTH</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
    <callout>
      <target>DIMM_TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

  <hwpError>
    <rc>RC_MSS_INVALID_PAGE_SIZE</rc>
    <description>
        Invalid page size
    </description>
    <ffdc>DRAM_WIDTH</ffdc>
    <callout>
      <procedure>MEMORY_PLUGGING_ERROR</procedure>
      <priority>HIGH</priority>
    </callout>
     <callout>
      <target>DIMM_TARGET</target>
      <priority>MEDIUM</priority>
    </callout>
    <deconfigure>
      <target>DIMM_TARGET</target>
    </deconfigure>
    <callout>
      <procedure>CODE</procedure>
      <priority>MEDIUM</priority>
    </callout>
  </hwpError>

</hwpErrors>