opal/hmi: Wakeup the cpu before reading core_fir

When stop state 5 is enabled, reading the core_fir during an HMI can
result in a xscom read error with xscom_read() returning an
OPAL_XSCOM_PARTIAL_GOOD error code and core_fir value of all FFs. At
present this return error code is not handled in decode_core_fir()
hence the invalid core_fir value is sent to the kernel where it
interprets it as a FATAL hmi causing a system check-stop.

This can be prevented by forcing the core to wake-up using before
reading the core_fir. Hence this patch wraps the call to
read_core_fir() within calls to dctl_set_special_wakeup() and
dctl_clear_special_wakeup().

Suggested-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Mahesh J Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Stewart Smith <stewart@linux.ibm.com>

core/hmi.c

@@ -379,7 +379,7 @@ static bool decode_core_fir(struct cpu_thread *cpu,
 {
 	uint64_t core_fir;
 	uint32_t core_id;
-	int i;
+	int i, swkup_rc;
 	bool found = false;
 	int64_t ret;
 	const char *loc;
@@ -390,14 +390,19 @@ static bool decode_core_fir(struct cpu_thread *cpu,
 
 	core_id = pir_to_core_id(cpu->pir);
 
+	/* Force the core to wakeup, otherwise reading core_fir is unrealiable
+	 * if stop-state 5 is enabled.
+	 */
+	swkup_rc = dctl_set_special_wakeup(cpu);
+
 	/* Get CORE FIR register value. */
 	ret = read_core_fir(cpu->chip_id, core_id, &core_fir);
 
-	if (ret == OPAL_HARDWARE) {
-		prerror("XSCOM error reading CORE FIR\n");
-		/* If the FIR can't be read, we should checkstop. */
-		return true;
-	} else if (ret == OPAL_WRONG_STATE) {
+	if (!swkup_rc)
+		dctl_clear_special_wakeup(cpu);
+
+
+	if (ret == OPAL_WRONG_STATE) {
 		/*
 		 * CPU is asleep, so it probably didn't cause the checkstop.
 		 * If no other HMI cause is found a "catchall" checkstop
@@ -408,6 +413,10 @@ static bool decode_core_fir(struct cpu_thread *cpu,
 		      "FIR read failed, chip %d core %d asleep\n",
 		      cpu->chip_id, core_id);
 		return false;
+	} else if (ret != OPAL_SUCCESS) {
+		prerror("XSCOM error reading CORE FIR\n");
+		/* If the FIR can't be read, we should checkstop. */
+		return true;
 	}
 
 	if (!core_fir)