phb4: set PHB CMPM registers for tunneled operations

P9 supports PCI tunneled operations (atomics and as_notify) that require
setting the PHB ASN Compare/Mask register with a 16-bit indication.

This register is currently initialized by enable_capi_mode(). But, as
tunneled operations may also work in PCI mode, the ASN Compare/Mask
register should rather be initialized in phb4_init_ioda3().

This patch also adds "ibm,phb-indications" to the device tree, to tell
Linux the values of CAPI, ASN, and NBW indications, when supported.

Tunneled operations tested by IBM in CAPI mode, by Mellanox Technologies
in PCI mode.

Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>

hw/phb4.c

@@ -3775,6 +3775,39 @@ static void phb4_init_capp_errors(struct phb4 *p)
 	out_be64(p->regs + 0x0cb0,	0x35777073ff000000ull);
 }
 
+ /*
+ * The capi indicator is over the 8 most significant bits on p9 (and
+ * not 16). We stay away from bits 59 (TVE select), 60 and 61 (MSI)
+ *
+ * For the mask, we keep bit 59 in, as capi messages must hit TVE#0.
+ * Bit 56 is not part of the mask, so that a NBW message (see below)
+ * is also considered a capi message.
+ */
+#define CAPIIND		0x0200
+#define CAPIMASK	0xFE00
+
+/*
+ * Non-Blocking Write messages are a subset of capi messages, so the
+ * indicator is the same as capi + an extra bit (56) to differentiate.
+ * Mask is the same as capi + the extra bit
+ */
+#define NBWIND		0x0300
+#define NBWMASK		0xFF00
+
+/*
+ * The ASN indicator is used for tunneled operations (as_notify and
+ * atomics).  Tunneled operation messages can be sent in PCI mode as
+ * well as CAPI mode.
+ *
+ * The format of those messages is specific and, for as_notify
+ * messages, the address field is hijacked to encode the LPID/PID/TID
+ * of the target thread, so those messages should not go through
+ * translation. They must hit TVE#1. Therefore bit 59 is part of the
+ * indicator.
+ */
+#define ASNIND		0x0C00
+#define ASNMASK		0xFF00
+
 /* Power Bus Common Queue Registers
  * All PBCQ and PBAIB registers are accessed via SCOM
  * NestBase = 4010C00 for PEC0
@@ -3861,16 +3894,13 @@ static int64_t enable_capi_mode(struct phb4 *p, uint64_t pe_number,
 
 	/*
 	 * Bit [0:7] XSL_DSNCTL[capiind]
-	 * Init_25 - CAPI Compare/Mask
+	 * Init_26 - CAPI Compare/Mask
 	 */
 	out_be64(p->regs + PHB_CAPI_CMPM,
-		 0x0200FE0000000000Ull | PHB_CAPI_CMPM_ENABLE);
+		 ((u64)CAPIIND << 48) |
+		 ((u64)CAPIMASK << 32) | PHB_CAPI_CMPM_ENABLE);
 
 	if (!(p->rev == PHB4_REV_NIMBUS_DD10)) {
-		/* Init_24 - ASN Compare/Mask */
-		out_be64(p->regs + PHB_PBL_ASN_CMPM,
-			 0x0400FF0000000000Ull | PHB_PBL_ASN_ENABLE);
-
 		/* PBCQ Tunnel Bar Register
 		 * Write Tunnel register to match PSL TNR register
 		 */
@@ -4192,7 +4222,8 @@ static void phb4_init_ioda3(struct phb4 *p)
 	/* See enable_capi_mode() */
 
 	/* Init_25 - ASN Compare/Mask */
-	/* See enable_capi_mode() */
+	out_be64(p->regs + PHB_ASN_CMPM, ((u64)ASNIND << 48) |
+		 ((u64)ASNMASK << 32) | PHB_ASN_CMPM_ENABLE);
 
 	/* Init_26 - CAPI Compare/Mask */
 	/* See enable_capi_mode() */
@@ -4804,6 +4835,10 @@ static void phb4_add_properties(struct phb4 *p)
 
 	/* Indicate to Linux that CAPP timebase sync is supported */
 	dt_add_property_string(np, "ibm,capp-timebase-sync", NULL);
+
+	/* Tell Linux Compare/Mask indication values */
+	dt_add_property_cells(np, "ibm,phb-indications", CAPIIND, ASNIND,
+			      NBWIND);
 }
 
 static bool phb4_calculate_windows(struct phb4 *p)

include/phb4-regs.h

@@ -71,8 +71,8 @@
 #define PHB_PEST_BAR			0x1a8
 #define   PHB_PEST_BAR_ENABLE		PPC_BIT(0)
 #define   PHB_PEST_BASE_ADDRESS		PPC_BITMASK(8,51)
-#define PHB_PBL_ASN_CMPM		0x1C0
-#define   PHB_PBL_ASN_ENABLE		PPC_BIT(63)
+#define PHB_ASN_CMPM			0x1C0
+#define   PHB_ASN_CMPM_ENABLE		PPC_BIT(63)
 #define PHB_CAPI_CMPM			0x1C8
 #define   PHB_CAPI_CMPM_ENABLE		PPC_BIT(63)
 #define PHB_M64_UPPER_BITS		0x1f0