span_processor.rs

//! # OpenTelemetry Span Processor Interface
//!
//! Span processor is an interface which allows hooks for span start and end method
//! invocations. The span processors are invoked only when
//! [`is_recording`] is true.
//!
//! Built-in span processors are responsible for batching and conversion of spans to
//! exportable representation and passing batches to exporters.
//!
//! Span processors can be registered directly on SDK [`TracerProvider`] and they are
//! invoked in the same order as they were registered.
//!
//! All `Tracer` instances created by a `TracerProvider` share the same span processors.
//! Changes to this collection reflect in all `Tracer` instances.
//!
//! The following diagram shows `SpanProcessor`'s relationship to other components
//! in the SDK:
//!
//! ```ascii
//!   +-----+--------------+   +-----------------------+   +-------------------+
//!   |     |              |   |                       |   |                   |
//!   |     |              |   | (Batch)SpanProcessor  |   |    SpanExporter   |
//!   |     |              +---> (Simple)SpanProcessor +--->  (JaegerExporter) |
//!   |     |              |   |                       |   |                   |
//!   | SDK | Tracer.span()|   +-----------------------+   +-------------------+
//!   |     | Span.end()   |
//!   |     |              |   +---------------------+
//!   |     |              |   |                     |
//!   |     |              +---> ZPagesProcessor     |
//!   |     |              |   |                     |
//!   +-----+--------------+   +---------------------+
//! ```
//!
//! [`is_recording`]: opentelemetry::trace::Span::is_recording()
//! [`TracerProvider`]: opentelemetry::trace::TracerProvider

use crate::export::trace::{ExportResult, SpanData, SpanExporter};
use crate::runtime::{RuntimeChannel, TrySend};
use crate::trace::Span;
use futures_channel::oneshot;
use futures_util::{
    future::{self, BoxFuture, Either},
    select,
    stream::{self, FusedStream, FuturesUnordered},
    Stream, StreamExt as _,
};
use opentelemetry::global;
use opentelemetry::{
    trace::{TraceError, TraceResult},
    Context,
};
use std::{env, fmt, str::FromStr, thread, time::Duration};

/// Delay interval between two consecutive exports.
const OTEL_BSP_SCHEDULE_DELAY: &str = "OTEL_BSP_SCHEDULE_DELAY";
/// Default delay interval between two consecutive exports.
const OTEL_BSP_SCHEDULE_DELAY_DEFAULT: u64 = 5_000;
/// Maximum queue size
const OTEL_BSP_MAX_QUEUE_SIZE: &str = "OTEL_BSP_MAX_QUEUE_SIZE";
/// Default maximum queue size
const OTEL_BSP_MAX_QUEUE_SIZE_DEFAULT: usize = 2_048;
/// Maximum batch size, must be less than or equal to OTEL_BSP_MAX_QUEUE_SIZE
const OTEL_BSP_MAX_EXPORT_BATCH_SIZE: &str = "OTEL_BSP_MAX_EXPORT_BATCH_SIZE";
/// Default maximum batch size
const OTEL_BSP_MAX_EXPORT_BATCH_SIZE_DEFAULT: usize = 512;
/// Maximum allowed time to export data.
const OTEL_BSP_EXPORT_TIMEOUT: &str = "OTEL_BSP_EXPORT_TIMEOUT";
/// Default maximum allowed time to export data.
const OTEL_BSP_EXPORT_TIMEOUT_DEFAULT: u64 = 30_000;
/// Environment variable to configure max concurrent exports for batch span
/// processor.
const OTEL_BSP_MAX_CONCURRENT_EXPORTS: &str = "OTEL_BSP_MAX_CONCURRENT_EXPORTS";
/// Default max concurrent exports for BSP
const OTEL_BSP_MAX_CONCURRENT_EXPORTS_DEFAULT: usize = 1;

/// `SpanProcessor` is an interface which allows hooks for span start and end
/// method invocations. The span processors are invoked only when is_recording
/// is true.
pub trait SpanProcessor: Send + Sync + std::fmt::Debug {
    /// `on_start` is called when a `Span` is started.  This method is called
    /// synchronously on the thread that started the span, therefore it should
    /// not block or throw exceptions.
    fn on_start(&self, span: &mut Span, cx: &Context);
    /// `on_end` is called after a `Span` is ended (i.e., the end timestamp is
    /// already set). This method is called synchronously within the `Span::end`
    /// API, therefore it should not block or throw an exception.
    fn on_end(&self, span: SpanData);
    /// Force the spans lying in the cache to be exported.
    fn force_flush(&self) -> TraceResult<()>;
    /// Shuts down the processor. Called when SDK is shut down. This is an
    /// opportunity for processors to do any cleanup required.
    fn shutdown(&mut self) -> TraceResult<()>;
}

/// A [SpanProcessor] that passes finished spans to the configured `SpanExporter`, as
/// soon as they are finished, without any batching.
#[derive(Debug)]
pub struct SimpleSpanProcessor {
    message_sender: crossbeam_channel::Sender<Message>,
}

impl SimpleSpanProcessor {
    pub(crate) fn new(mut exporter: Box<dyn SpanExporter>) -> Self {
        let (message_sender, rx) = crossbeam_channel::unbounded();

        let _ = thread::Builder::new()
            .name("opentelemetry-exporter".to_string())
            .spawn(move || {
                while let Ok(msg) = rx.recv() {
                    match msg {
                        Message::ExportSpan(span) => {
                            if let Err(err) =
                                futures_executor::block_on(exporter.export(vec![span]))
                            {
                                global::handle_error(err);
                            }
                        }
                        Message::Flush(sender) => {
                            Self::respond(&sender, "sync");
                        }
                        Message::Shutdown(sender) => {
                            exporter.shutdown();

                            Self::respond(&sender, "shutdown");

                            return;
                        }
                    }
                }

                exporter.shutdown();
            });

        Self { message_sender }
    }

    fn signal(&self, msg: fn(crossbeam_channel::Sender<()>) -> Message, description: &str) {
        let (tx, rx) = crossbeam_channel::bounded(0);

        if self.message_sender.send(msg(tx)).is_ok() {
            if let Err(err) = rx.recv() {
                global::handle_error(TraceError::from(format!(
                    "error {description} span processor: {err:?}"
                )));
            }
        }
    }

    fn respond(sender: &crossbeam_channel::Sender<()>, description: &str) {
        if let Err(err) = sender.send(()) {
            global::handle_error(TraceError::from(format!(
                "could not send {description}: {err:?}"
            )));
        }
    }
}

impl SpanProcessor for SimpleSpanProcessor {
    fn on_start(&self, _span: &mut Span, _cx: &Context) {
        // Ignored
    }

    fn on_end(&self, span: SpanData) {
        if !span.span_context.is_sampled() {
            return;
        }

        if let Err(err) = self.message_sender.send(Message::ExportSpan(span)) {
            global::handle_error(TraceError::from(format!("error processing span {:?}", err)));
        }
    }

    fn force_flush(&self) -> TraceResult<()> {
        self.signal(Message::Flush, "flushing");

        Ok(())
    }

    fn shutdown(&mut self) -> TraceResult<()> {
        self.signal(Message::Shutdown, "shutting down");

        Ok(())
    }
}

#[derive(Debug)]
enum Message {
    ExportSpan(SpanData),
    Flush(crossbeam_channel::Sender<()>),
    Shutdown(crossbeam_channel::Sender<()>),
}

/// A [`SpanProcessor`] that asynchronously buffers finished spans and reports
/// them at a preconfigured interval.
///
/// Batch span processors need to run a background task to collect and send
/// spans. Different runtimes need different ways to handle the background task.
///
/// Note: Configuring an opentelemetry `Runtime` that's not compatible with the
/// underlying runtime can cause deadlocks (see tokio section).
///
/// ### Use with Tokio
///
/// Tokio currently offers two different schedulers. One is
/// `current_thread_scheduler`, the other is `multiple_thread_scheduler`. Both
/// of them default to use batch span processors to install span exporters.
///
/// Tokio's `current_thread_scheduler` can cause the program to hang forever if
/// blocking work is scheduled with other tasks in the same runtime. To avoid
/// this, be sure to enable the `rt-tokio-current-thread` feature in this crate
/// if you are using that runtime (e.g. users of actix-web), and blocking tasks
/// will then be scheduled on a different thread.
///
/// # Examples
///
/// This processor can be configured with an [`executor`] of your choice to
/// batch and upload spans asynchronously when they end. If you have added a
/// library like [`tokio`] or [`async-std`], you can pass in their respective
/// `spawn` and `interval` functions to have batching performed in those
/// contexts.
///
/// ```
/// # #[cfg(feature="tokio")]
/// # {
/// use opentelemetry::global;
/// use opentelemetry_sdk::{runtime, testing::trace::NoopSpanExporter, trace};
/// use std::time::Duration;
///
/// #[tokio::main]
/// async fn main() {
///     // Configure your preferred exporter
///     let exporter = NoopSpanExporter::new();
///
///     // Create a batch span processor using an exporter and a runtime
///     let batch = trace::BatchSpanProcessor::builder(exporter, runtime::Tokio)
///         .with_max_queue_size(4096)
///         .build();
///
///     // Then use the `with_batch_exporter` method to have the provider export spans in batches.
///     let provider = trace::TracerProvider::builder()
///         .with_span_processor(batch)
///         .build();
///
///     let _ = global::set_tracer_provider(provider);
/// }
/// # }
/// ```
///
/// [`executor`]: https://docs.rs/futures/0.3/futures/executor/index.html
/// [`tokio`]: https://tokio.rs
/// [`async-std`]: https://async.rs
pub struct BatchSpanProcessor<R: RuntimeChannel<BatchMessage>> {
    message_sender: R::Sender,
}

impl<R: RuntimeChannel<BatchMessage>> fmt::Debug for BatchSpanProcessor<R> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("BatchSpanProcessor")
            .field("message_sender", &self.message_sender)
            .finish()
    }
}

impl<R: RuntimeChannel<BatchMessage>> SpanProcessor for BatchSpanProcessor<R> {
    fn on_start(&self, _span: &mut Span, _cx: &Context) {
        // Ignored
    }

    fn on_end(&self, span: SpanData) {
        if !span.span_context.is_sampled() {
            return;
        }

        let result = self.message_sender.try_send(BatchMessage::ExportSpan(span));

        if let Err(err) = result {
            global::handle_error(TraceError::Other(err.into()));
        }
    }

    fn force_flush(&self) -> TraceResult<()> {
        let (res_sender, res_receiver) = oneshot::channel();
        self.message_sender
            .try_send(BatchMessage::Flush(Some(res_sender)))
            .map_err(|err| TraceError::Other(err.into()))?;

        futures_executor::block_on(res_receiver)
            .map_err(|err| TraceError::Other(err.into()))
            .and_then(|identity| identity)
    }

    fn shutdown(&mut self) -> TraceResult<()> {
        let (res_sender, res_receiver) = oneshot::channel();
        self.message_sender
            .try_send(BatchMessage::Shutdown(res_sender))
            .map_err(|err| TraceError::Other(err.into()))?;

        futures_executor::block_on(res_receiver)
            .map_err(|err| TraceError::Other(err.into()))
            .and_then(|identity| identity)
    }
}

/// Messages sent between application thread and batch span processor's work thread.
// In this enum the size difference is not a concern because:
// 1. If we wrap SpanData into a pointer, it will add overhead when processing.
// 2. Most of the messages will be ExportSpan.
#[allow(clippy::large_enum_variant)]
#[derive(Debug)]
pub enum BatchMessage {
    /// Export spans, usually called when span ends
    ExportSpan(SpanData),
    /// Flush the current buffer to the backend, it can be triggered by
    /// pre configured interval or a call to `force_push` function.
    Flush(Option<oneshot::Sender<ExportResult>>),
    /// Shut down the worker thread, push all spans in buffer to the backend.
    Shutdown(oneshot::Sender<ExportResult>),
}

struct BatchSpanProcessorInternal<R> {
    spans: Vec<SpanData>,
    export_tasks: FuturesUnordered<BoxFuture<'static, ExportResult>>,
    runtime: R,
    exporter: Box<dyn SpanExporter>,
    config: BatchConfig,
}

impl<R: RuntimeChannel<BatchMessage>> BatchSpanProcessorInternal<R> {
    async fn flush(&mut self, res_channel: Option<oneshot::Sender<ExportResult>>) {
        let export_task = self.export();
        let task = Box::pin(async move {
            let result = export_task.await;

            if let Some(channel) = res_channel {
                if let Err(result) = channel.send(result) {
                    global::handle_error(TraceError::from(format!(
                        "failed to send flush result: {:?}",
                        result
                    )));
                }
            } else if let Err(err) = result {
                global::handle_error(err);
            }

            Ok(())
        });

        if self.config.max_concurrent_exports == 1 {
            let _ = task.await;
        } else {
            self.export_tasks.push(task);
            while self.export_tasks.next().await.is_some() {}
        }
    }

    /// Process a single message
    ///
    /// A return value of false indicates shutdown
    async fn process_message(&mut self, message: BatchMessage) -> bool {
        match message {
            // Span has finished, add to buffer of pending spans.
            BatchMessage::ExportSpan(span) => {
                self.spans.push(span);

                if self.spans.len() == self.config.max_export_batch_size {
                    // If concurrent exports are saturated, wait for one to complete.
                    if !self.export_tasks.is_empty()
                        && self.export_tasks.len() == self.config.max_concurrent_exports
                    {
                        self.export_tasks.next().await;
                    }

                    let export_task = self.export();
                    let task = async move {
                        if let Err(err) = export_task.await {
                            global::handle_error(err);
                        }

                        Ok(())
                    };
                    // Special case when not using concurrent exports
                    if self.config.max_concurrent_exports == 1 {
                        let _ = task.await;
                    } else {
                        self.export_tasks.push(Box::pin(task));
                    }
                }
            }
            // Span batch interval time reached or a force flush has been invoked, export
            // current spans.
            //
            // This is a hint to ensure that any tasks associated with Spans for which the
            // SpanProcessor had already received events prior to the call to ForceFlush
            // SHOULD be completed as soon as possible, preferably before returning from
            // this method.
            //
            // In particular, if any SpanProcessor has any associated exporter, it SHOULD
            // try to call the exporter's Export with all spans for which this was not
            // already done and then invoke ForceFlush on it. The built-in SpanProcessors
            // MUST do so. If a timeout is specified (see below), the SpanProcessor MUST
            // prioritize honoring the timeout over finishing all calls. It MAY skip or
            // abort some or all Export or ForceFlush calls it has made to achieve this
            // goal.
            //
            // NB: `force_flush` is not currently implemented on exporters; the equivalent
            // would be waiting for exporter tasks to complete. In the case of
            // channel-coupled exporters, they will need a `force_flush` implementation to
            // properly block.
            BatchMessage::Flush(res_channel) => {
                self.flush(res_channel).await;
            }
            // Stream has terminated or processor is shutdown, return to finish execution.
            BatchMessage::Shutdown(ch) => {
                self.flush(Some(ch)).await;
                self.exporter.shutdown();
                return false;
            }
        }

        true
    }

    fn export(&mut self) -> BoxFuture<'static, ExportResult> {
        // Batch size check for flush / shutdown. Those methods may be called
        // when there's no work to do.
        if self.spans.is_empty() {
            return Box::pin(future::ready(Ok(())));
        }

        let export = self.exporter.export(self.spans.split_off(0));
        let timeout = self.runtime.delay(self.config.max_export_timeout);
        let time_out = self.config.max_export_timeout;

        Box::pin(async move {
            match future::select(export, timeout).await {
                Either::Left((export_res, _)) => export_res,
                Either::Right((_, _)) => ExportResult::Err(TraceError::ExportTimedOut(time_out)),
            }
        })
    }

    async fn run(mut self, mut messages: impl Stream<Item = BatchMessage> + Unpin + FusedStream) {
        loop {
            select! {
                // FuturesUnordered implements Fuse intelligently such that it
                // will become eligible again once new tasks are added to it.
                _ = self.export_tasks.next() => {
                    // An export task completed; do we need to do anything with it?
                },
                message = messages.next() => {
                    match message {
                        Some(message) => {
                            if !self.process_message(message).await {
                                break;
                            }
                        },
                        None => break,
                    }
                },
            }
        }
    }
}

impl<R: RuntimeChannel<BatchMessage>> BatchSpanProcessor<R> {
    pub(crate) fn new(exporter: Box<dyn SpanExporter>, config: BatchConfig, runtime: R) -> Self {
        let (message_sender, message_receiver) =
            runtime.batch_message_channel(config.max_queue_size);
        let ticker = runtime
            .interval(config.scheduled_delay)
            .map(|_| BatchMessage::Flush(None));
        let timeout_runtime = runtime.clone();

        let messages = Box::pin(stream::select(message_receiver, ticker));
        let processor = BatchSpanProcessorInternal {
            spans: Vec::new(),
            export_tasks: FuturesUnordered::new(),
            runtime: timeout_runtime,
            config,
            exporter,
        };

        // Spawn worker process via user-defined spawn function.
        runtime.spawn(Box::pin(processor.run(messages)));

        // Return batch processor with link to worker
        BatchSpanProcessor { message_sender }
    }

    /// Create a new batch processor builder
    pub fn builder<E>(exporter: E, runtime: R) -> BatchSpanProcessorBuilder<E, R>
    where
        E: SpanExporter,
    {
        BatchSpanProcessorBuilder {
            exporter,
            config: BatchConfig::default(),
            runtime,
        }
    }
}

/// Batch span processor configuration
#[derive(Debug)]
pub struct BatchConfig {
    /// The maximum queue size to buffer spans for delayed processing. If the
    /// queue gets full it drops the spans. The default value of is 2048.
    max_queue_size: usize,

    /// The delay interval in milliseconds between two consecutive processing
    /// of batches. The default value is 5 seconds.
    scheduled_delay: Duration,

    /// The maximum number of spans to process in a single batch. If there are
    /// more than one batch worth of spans then it processes multiple batches
    /// of spans one batch after the other without any delay. The default value
    /// is 512.
    max_export_batch_size: usize,

    /// The maximum duration to export a batch of data.
    max_export_timeout: Duration,

    /// Maximum number of concurrent exports
    ///
    /// Limits the number of spawned tasks for exports and thus memory consumed
    /// by an exporter. A value of 1 will cause exports to be performed
    /// synchronously on the BatchSpanProcessor task.
    max_concurrent_exports: usize,
}

impl Default for BatchConfig {
    fn default() -> Self {
        let mut config = BatchConfig {
            max_queue_size: OTEL_BSP_MAX_QUEUE_SIZE_DEFAULT,
            scheduled_delay: Duration::from_millis(OTEL_BSP_SCHEDULE_DELAY_DEFAULT),
            max_export_batch_size: OTEL_BSP_MAX_EXPORT_BATCH_SIZE_DEFAULT,
            max_export_timeout: Duration::from_millis(OTEL_BSP_EXPORT_TIMEOUT_DEFAULT),
            max_concurrent_exports: OTEL_BSP_MAX_CONCURRENT_EXPORTS_DEFAULT,
        };

        if let Some(max_concurrent_exports) = env::var(OTEL_BSP_MAX_CONCURRENT_EXPORTS)
            .ok()
            .and_then(|max_concurrent_exports| usize::from_str(&max_concurrent_exports).ok())
        {
            config.max_concurrent_exports = max_concurrent_exports;
        }

        if let Some(max_queue_size) = env::var(OTEL_BSP_MAX_QUEUE_SIZE)
            .ok()
            .and_then(|queue_size| usize::from_str(&queue_size).ok())
        {
            config.max_queue_size = max_queue_size;
        }

        if let Some(scheduled_delay) = env::var(OTEL_BSP_SCHEDULE_DELAY)
            .ok()
            .or_else(|| env::var("OTEL_BSP_SCHEDULE_DELAY_MILLIS").ok())
            .and_then(|delay| u64::from_str(&delay).ok())
        {
            config.scheduled_delay = Duration::from_millis(scheduled_delay);
        }

        if let Some(max_export_batch_size) = env::var(OTEL_BSP_MAX_EXPORT_BATCH_SIZE)
            .ok()
            .and_then(|batch_size| usize::from_str(&batch_size).ok())
        {
            config.max_export_batch_size = max_export_batch_size;
        }

        // max export batch size must be less or equal to max queue size.
        // we set max export batch size to max queue size if it's larger than max queue size.
        if config.max_export_batch_size > config.max_queue_size {
            config.max_export_batch_size = config.max_queue_size;
        }

        if let Some(max_export_timeout) = env::var(OTEL_BSP_EXPORT_TIMEOUT)
            .ok()
            .or_else(|| env::var("OTEL_BSP_EXPORT_TIMEOUT_MILLIS").ok())
            .and_then(|timeout| u64::from_str(&timeout).ok())
        {
            config.max_export_timeout = Duration::from_millis(max_export_timeout);
        }

        config
    }
}

impl BatchConfig {
    /// Set max_queue_size for [`BatchConfig`].
    /// It's the maximum queue size to buffer spans for delayed processing.
    /// If the queue gets full it will drops the spans.
    /// The default value of is 2048.
    pub fn with_max_queue_size(mut self, max_queue_size: usize) -> Self {
        self.max_queue_size = max_queue_size;
        self
    }

    /// Set max_export_batch_size for [`BatchConfig`].
    /// It's the maximum number of spans to process in a single batch. If there are
    /// more than one batch worth of spans then it processes multiple batches
    /// of spans one batch after the other without any delay. The default value
    /// is 512.
    pub fn with_max_export_batch_size(mut self, max_export_batch_size: usize) -> Self {
        self.max_export_batch_size = max_export_batch_size;
        self
    }

    /// Set max_concurrent_exports for [`BatchConfig`].
    /// It's the maximum number of concurrent exports.
    /// Limits the number of spawned tasks for exports and thus memory consumed by an exporter.
    /// The default value is 1.
    /// IF the max_concurrent_exports value is default value, it will cause exports to be performed
    /// synchronously on the BatchSpanProcessor task.
    pub fn with_max_concurrent_exports(mut self, max_concurrent_exports: usize) -> Self {
        self.max_concurrent_exports = max_concurrent_exports;
        self
    }

    /// Set scheduled_delay_duration for [`BatchConfig`].
    /// It's the delay interval in milliseconds between two consecutive processing of batches.
    /// The default value is 5000 milliseconds.
    pub fn with_scheduled_delay(mut self, scheduled_delay: Duration) -> Self {
        self.scheduled_delay = scheduled_delay;
        self
    }

    /// Set max_export_timeout for [`BatchConfig`].
    /// It's the maximum duration to export a batch of data.
    /// The The default value is 30000 milliseconds.
    pub fn with_max_export_timeout(mut self, max_export_timeout: Duration) -> Self {
        self.max_export_timeout = max_export_timeout;
        self
    }
}

/// A builder for creating [`BatchSpanProcessor`] instances.
///
#[derive(Debug)]
pub struct BatchSpanProcessorBuilder<E, R> {
    exporter: E,
    config: BatchConfig,
    runtime: R,
}

impl<E, R> BatchSpanProcessorBuilder<E, R>
where
    E: SpanExporter + 'static,
    R: RuntimeChannel<BatchMessage>,
{
    /// Set max queue size for batches
    pub fn with_max_queue_size(self, size: usize) -> Self {
        let mut config = self.config;
        config.max_queue_size = size;

        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Set scheduled delay for batches
    pub fn with_scheduled_delay(self, delay: Duration) -> Self {
        let mut config = self.config;
        config.scheduled_delay = delay;

        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Set max timeout for exporting.
    pub fn with_max_timeout(self, timeout: Duration) -> Self {
        let mut config = self.config;
        config.max_export_timeout = timeout;

        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Set max export size for batches, should always less than or equals to max queue size.
    ///
    /// If input is larger than max queue size, will lower it to be equal to max queue size
    pub fn with_max_export_batch_size(self, size: usize) -> Self {
        let mut config = self.config;
        if size > config.max_queue_size {
            config.max_export_batch_size = config.max_queue_size;
        } else {
            config.max_export_batch_size = size;
        }

        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Set the maximum number of concurrent exports
    ///
    /// This setting may be useful for limiting network throughput or memory
    /// consumption.
    pub fn with_max_concurrent_exports(self, max: usize) -> Self {
        let mut config = self.config;
        config.max_concurrent_exports = max;
        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Set the BatchConfig for [BatchSpanProcessorBuilder]
    pub fn with_batch_config(self, config: BatchConfig) -> Self {
        BatchSpanProcessorBuilder { config, ..self }
    }

    /// Build a batch processor
    pub fn build(self) -> BatchSpanProcessor<R> {
        BatchSpanProcessor::new(Box::new(self.exporter), self.config, self.runtime)
    }
}

#[cfg(all(test, feature = "testing", feature = "trace"))]
mod tests {
    use super::{
        BatchSpanProcessor, SimpleSpanProcessor, SpanProcessor, OTEL_BSP_EXPORT_TIMEOUT,
        OTEL_BSP_MAX_EXPORT_BATCH_SIZE, OTEL_BSP_MAX_QUEUE_SIZE, OTEL_BSP_MAX_QUEUE_SIZE_DEFAULT,
        OTEL_BSP_SCHEDULE_DELAY, OTEL_BSP_SCHEDULE_DELAY_DEFAULT,
    };
    use crate::export::trace::{ExportResult, SpanData, SpanExporter};
    use crate::runtime;
    use crate::testing::trace::{
        new_test_export_span_data, new_test_exporter, new_tokio_test_exporter,
    };
    use crate::trace::{BatchConfig, EvictedHashMap, EvictedQueue};
    use async_trait::async_trait;
    use opentelemetry::trace::{SpanContext, SpanId, SpanKind, Status};
    use std::fmt::Debug;
    use std::future::Future;
    use std::time::Duration;

    #[test]
    fn simple_span_processor_on_end_calls_export() {
        let (exporter, rx_export, _rx_shutdown) = new_test_exporter();
        let mut processor = SimpleSpanProcessor::new(Box::new(exporter));
        processor.on_end(new_test_export_span_data());
        assert!(rx_export.recv().is_ok());
        let _result = processor.shutdown();
    }

    #[test]
    fn simple_span_processor_on_end_skips_export_if_not_sampled() {
        let (exporter, rx_export, _rx_shutdown) = new_test_exporter();
        let processor = SimpleSpanProcessor::new(Box::new(exporter));
        let unsampled = SpanData {
            span_context: SpanContext::empty_context(),
            parent_span_id: SpanId::INVALID,
            span_kind: SpanKind::Internal,
            name: "opentelemetry".into(),
            start_time: opentelemetry::time::now(),
            end_time: opentelemetry::time::now(),
            attributes: EvictedHashMap::new(0, 0),
            events: EvictedQueue::new(0),
            links: EvictedQueue::new(0),
            status: Status::Unset,
            resource: Default::default(),
            instrumentation_lib: Default::default(),
        };
        processor.on_end(unsampled);
        assert!(rx_export.recv_timeout(Duration::from_millis(100)).is_err());
    }

    #[test]
    fn simple_span_processor_shutdown_calls_shutdown() {
        let (exporter, _rx_export, rx_shutdown) = new_test_exporter();
        let mut processor = SimpleSpanProcessor::new(Box::new(exporter));
        let _result = processor.shutdown();
        assert!(rx_shutdown.try_recv().is_ok());
    }

    #[test]
    fn test_batch_config_with_fields() {
        let batch = BatchConfig::default()
            .with_max_export_batch_size(10)
            .with_scheduled_delay(Duration::from_millis(10))
            .with_max_export_timeout(Duration::from_millis(10))
            .with_max_concurrent_exports(10)
            .with_max_queue_size(10);
        assert_eq!(batch.max_export_batch_size, 10);
        assert_eq!(batch.scheduled_delay, Duration::from_millis(10));
        assert_eq!(batch.max_export_timeout, Duration::from_millis(10));
        assert_eq!(batch.max_concurrent_exports, 10);
        assert_eq!(batch.max_queue_size, 10);
    }

    #[test]
    fn test_build_batch_span_processor_builder() {
        std::env::set_var(OTEL_BSP_MAX_EXPORT_BATCH_SIZE, "500");
        std::env::set_var(OTEL_BSP_EXPORT_TIMEOUT, "2046");
        std::env::set_var(OTEL_BSP_SCHEDULE_DELAY, "I am not number");

        let mut builder = BatchSpanProcessor::builder(new_test_exporter().0, runtime::Tokio);
        // export batch size cannot exceed max queue size
        assert_eq!(builder.config.max_export_batch_size, 500);
        assert_eq!(
            builder.config.scheduled_delay,
            Duration::from_millis(OTEL_BSP_SCHEDULE_DELAY_DEFAULT)
        );
        assert_eq!(
            builder.config.max_queue_size,
            OTEL_BSP_MAX_QUEUE_SIZE_DEFAULT
        );
        assert_eq!(
            builder.config.max_export_timeout,
            Duration::from_millis(2046)
        );

        std::env::set_var(OTEL_BSP_MAX_QUEUE_SIZE, "120");
        builder = BatchSpanProcessor::builder(new_test_exporter().0, runtime::Tokio);

        assert_eq!(builder.config.max_export_batch_size, 120);
        assert_eq!(builder.config.max_queue_size, 120);
    }

    #[tokio::test]
    async fn test_batch_span_processor() {
        let (exporter, mut export_receiver, _shutdown_receiver) = new_tokio_test_exporter();
        let config = BatchConfig {
            scheduled_delay: Duration::from_secs(60 * 60 * 24), // set the tick to 24 hours so we know the span must be exported via force_flush
            ..Default::default()
        };
        let mut processor =
            BatchSpanProcessor::new(Box::new(exporter), config, runtime::TokioCurrentThread);
        let handle = tokio::spawn(async move {
            loop {
                if let Some(span) = export_receiver.recv().await {
                    assert_eq!(span.span_context, new_test_export_span_data().span_context);
                    break;
                }
            }
        });
        tokio::time::sleep(Duration::from_secs(1)).await; // skip the first
        processor.on_end(new_test_export_span_data());
        let flush_res = processor.force_flush();
        assert!(flush_res.is_ok());
        let _shutdown_result = processor.shutdown();

        assert!(
            tokio::time::timeout(Duration::from_secs(5), handle)
                .await
                .is_ok(),
            "timed out in 5 seconds. force_flush may not export any data when called"
        );
    }

    struct BlockingExporter<D> {
        delay_for: Duration,
        delay_fn: D,
    }

    impl<D, DS> Debug for BlockingExporter<D>
    where
        D: Fn(Duration) -> DS + 'static + Send + Sync,
        DS: Future<Output = ()> + Send + Sync + 'static,
    {
        fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
            f.write_str("blocking exporter for testing")
        }
    }

    #[async_trait]
    impl<D, DS> SpanExporter for BlockingExporter<D>
    where
        D: Fn(Duration) -> DS + 'static + Send + Sync,
        DS: Future<Output = ()> + Send + Sync + 'static,
    {
        fn export(
            &mut self,
            _batch: Vec<SpanData>,
        ) -> futures_util::future::BoxFuture<'static, ExportResult> {
            use futures_util::FutureExt;
            Box::pin((self.delay_fn)(self.delay_for).map(|_| Ok(())))
        }
    }

    #[test]
    fn test_timeout_tokio_timeout() {
        // If time_out is true, then we ask exporter to block for 60s and set timeout to 5s.
        // If time_out is false, then we ask the exporter to block for 5s and set timeout to 60s.
        // Either way, the test should be finished within 5s.
        let runtime = tokio::runtime::Builder::new_multi_thread()
            .enable_all()
            .build()
            .unwrap();
        runtime.block_on(timeout_test_tokio(true));
    }

    #[test]
    fn test_timeout_tokio_not_timeout() {
        let runtime = tokio::runtime::Builder::new_multi_thread()
            .enable_all()
            .build()
            .unwrap();
        runtime.block_on(timeout_test_tokio(false));
    }

    #[test]
    #[cfg(feature = "rt-async-std")]
    fn test_timeout_async_std_timeout() {
        async_std::task::block_on(timeout_test_std_async(true));
    }

    #[test]
    #[cfg(feature = "rt-async-std")]
    fn test_timeout_async_std_not_timeout() {
        async_std::task::block_on(timeout_test_std_async(false));
    }

    // If the time_out is true, then the result suppose to ended with timeout.
    // otherwise the exporter should be able to export within time out duration.
    #[cfg(feature = "rt-async-std")]
    async fn timeout_test_std_async(time_out: bool) {
        let config = BatchConfig {
            max_export_timeout: Duration::from_millis(if time_out { 5 } else { 60 }),
            scheduled_delay: Duration::from_secs(60 * 60 * 24), // set the tick to 24 hours so we know the span must be exported via force_flush
            ..Default::default()
        };
        let exporter = BlockingExporter {
            delay_for: Duration::from_millis(if !time_out { 5 } else { 60 }),
            delay_fn: async_std::task::sleep,
        };
        let mut processor = BatchSpanProcessor::new(Box::new(exporter), config, runtime::AsyncStd);
        processor.on_end(new_test_export_span_data());
        let flush_res = processor.force_flush();
        if time_out {
            assert!(flush_res.is_err());
        } else {
            assert!(flush_res.is_ok());
        }
        let shutdown_res = processor.shutdown();
        assert!(shutdown_res.is_ok());
    }

    // If the time_out is true, then the result suppose to ended with timeout.
    // otherwise the exporter should be able to export within time out duration.
    async fn timeout_test_tokio(time_out: bool) {
        let config = BatchConfig {
            max_export_timeout: Duration::from_millis(if time_out { 5 } else { 60 }),
            scheduled_delay: Duration::from_secs(60 * 60 * 24), // set the tick to 24 hours so we know the span must be exported via force_flush,
            ..Default::default()
        };
        let exporter = BlockingExporter {
            delay_for: Duration::from_millis(if !time_out { 5 } else { 60 }),
            delay_fn: tokio::time::sleep,
        };
        let mut processor =
            BatchSpanProcessor::new(Box::new(exporter), config, runtime::TokioCurrentThread);
        tokio::time::sleep(Duration::from_secs(1)).await; // skip the first
        processor.on_end(new_test_export_span_data());
        let flush_res = processor.force_flush();
        if time_out {
            assert!(flush_res.is_err());
        } else {
            assert!(flush_res.is_ok());
        }
        let shutdown_res = processor.shutdown();
        assert!(shutdown_res.is_ok());
    }
}