Skip to content

Latest commit

 

History

History
55 lines (39 loc) · 1.68 KB

index.rst

File metadata and controls

55 lines (39 loc) · 1.68 KB
Raw

Installation

There are several ways to install Open Notificaties. A scalable solution is to use Kubernetes<deployment_kubernetes>. You can also run the Docker containers<deployment_containers> on a single machine

Before you begin

  • Check the minimum system requirements<installation_hardware> for the target machine(s).
  • Make sure the target machine(s) have access to the Internet.

  • The target machine(s) should be reachable via at least a local DNS entry:

    • Open Zaak: open-zaak.<organization.local>
    • Open Notificaties: open-notificaties.<organization.local>

    The machine(s) do not need to be publically accessible and do not need a public DNS entry. In some cases, you might want this but it's not recommended. The same machine can be used for both Open Zaak and Open Notificaties.

  • If you want to use NLX, make sure you have a publicaly available domain name, for example nlx.<organization.com>, where your NLX-inway is accessible to the outside world.

Guides

hardware deployment/kubernetes deployment/single_server configuration self_signed

Post-install checklist

After Open Notificaties has been installed successfully, go through the following checklist to see if the software works as expected:

Check configuration

Check the configuration page for Open Notificaties, accessible at the url https://open-notificaties.gemeente.nl/view-config/. This page will indicate whether certain settings are properly configured.