post_install.rst

Post-install checklist

After Open Zaak has been installed successfully, go through the following checklist to see if the software works as expected:

Check configuration

Check the configuration page for Open Zaak, accessible at the url https://open-zaak.gemeente.nl/view-config/. This page will indicate whether certain settings are properly configured:

Run check management commands

If Sentry was set up for Open Zaak, make sure to run the following command to ensure that logging to Sentry will work as expected:

python src/manage.py raven test

Furthermore, to verify that notifications can be received by the URL as defined in the configuration, send a test notification using the following command:

python src/manage.py send_test_notification

Note

The notification is sent to the test channel - make sure it exists in the Notificaties API you're using!

Run the Postman collection

Finally, run a simple Postman collection on the new install of Open Zaak:

• Create an Applicatie with superuser permissions via the admin
• A simple Postman collection has been published here, click on the Run in Postman button in the top right.
• Once the collection is loaded into Postman, click the icon in the top right to manage environments:

• Then click Add, enter the correct environment variables, then click Update:

• Click on the Runner button in the top left of the screen, then select the imported collection and the created environment and click Run

• If Open Zaak is properly configured, the tests will pass