Arduino Nano clone driver CH340G

[ejalal]

Hi all,

Is there any way to add drivers for Arduino Nano clone CH340G in the future ? This one is not recognised as /dev/ttyACM0.

I need that to replace my expensive Arduino Uno to drive an Enigmalight setup.

[atvcaptain]

we have add for long time all openatv image: https://github.com/oe-alliance/oe-alliance-core/blob/3.4/meta-brands/meta-ceryon/recipes-linux/linux-ceryon-4.0.1/7000s/defconfig#L2342

you must only install the kernel drivers from feed

[ejalal]

Hi captain
I just plugged it and it wasn't recognised as /dev/ttyACM0 like the original Adruino.
kernel-module-cdc-acm is already installed.
After googling for some time, I found an alternative driver for this one when is located in http://www.wch.cn/download/CH341SER_LINUX_ZIP.html
Is it possible to include in one of the next builds ?

[atvcaptain]

you must install self : opkg install kernel-module-ch341

[ejalal]

Hi captain

I'm getting this

root@vuduo2:~# opkg install kernel-module-ch341
Couldn't find anything to satisfy 'kernel-module-ch341'.
Unknown package 'kernel-module-ch341'.
Collected errors:

• opkg_install: Cannot install package kernel-module-ch341.

Tried with opkg install kernel-module-ch340 and it didn't work either.

[atvcaptain]

ah duo2 i see, i have forget, check next days i include the driver

[ejalal]

Great, can you also include it in solo4k please, it has the exact same problem

[atvcaptain]

yes i have add too

[ejalal]

Thanks a lot for tour great support