simulation.cpp

/*******************************************************************************

Copyright (C) The University of Auckland

OpenCOR is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

OpenCOR is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.

*******************************************************************************/

//==============================================================================
// Simulation
//==============================================================================

#include "cellmlfilemanager.h"
#include "cellmlfileruntime.h"
#include "combinefilemanager.h"
#include "filemanager.h"
#include "interfaces.h"
#include "sedmlfilemanager.h"
#include "simulation.h"
#include "simulationworker.h"

//==============================================================================

#include <QThread>

//==============================================================================

#include "libsedmlbegin.h"
    #include "sedml/SedAlgorithm.h"
    #include "sedml/SedDocument.h"
    #include "sedml/SedOneStep.h"
    #include "sedml/SedUniformTimeCourse.h"
#include "libsedmlend.h"

//==============================================================================

namespace OpenCOR {
namespace SimulationSupport {

//==============================================================================

SimulationIssue::SimulationIssue(Type pType, int pLine, int pColumn,
                                 const QString &pMessage) :
    mType(pType),
    mLine(pLine),
    mColumn(pColumn),
    mMessage(pMessage)
{
}

//==============================================================================

SimulationIssue::SimulationIssue(Type pType, const QString &pMessage) :
    SimulationIssue(pType, 0, 0, pMessage)
{
}

//==============================================================================

SimulationIssue::Type SimulationIssue::type() const
{
    // Return the issue's type

    return mType;
}

//==============================================================================

QString SimulationIssue::typeAsString() const
{
    // Return the issue's type as a string

    switch (mType) {
    case SimulationSupport::SimulationIssue::Type::Information:
        return QObject::tr("Information");
    case SimulationSupport::SimulationIssue::Type::Error:
        return QObject::tr("Error");
    case SimulationSupport::SimulationIssue::Type::Warning:
        return QObject::tr("Warning");
    case SimulationSupport::SimulationIssue::Type::Fatal:
        return QObject::tr("Fatal");
    }

    return "???";
    // Note: we can't reach this point, but without it we may, at compilation
    //       time, be told that not all control paths return a value...
}

//==============================================================================

int SimulationIssue::line() const
{
    // Return the issue's line

    return mLine;
}

//==============================================================================

int SimulationIssue::column() const
{
    // Return the issue's column

    return mColumn;
}

//==============================================================================

QString SimulationIssue::message() const
{
    // Return the issue's message

    return mMessage;
}

//==============================================================================

SimulationObject::SimulationObject(Simulation *pSimulation) :
    mSimulation(pSimulation)
{
}

//==============================================================================

SimulationData::SimulationData(Simulation *pSimulation) :
    SimulationObject(pSimulation),
    mSimulationDataUpdatedFunction(std::bind(&SimulationData::updateParameters, this))
{
    // Create our various arrays

    createArrays();
}

//==============================================================================

SimulationData::~SimulationData()
{
    // Delete some internal objects

    deleteArrays();
}

//==============================================================================

void SimulationData::reload()
{
    // Reload ourselves by deleting and recreating our arrays

    deleteArrays();
    createArrays();
}

//==============================================================================

double * SimulationData::constants() const
{
    // Return our constants array

    return mConstantsArray->data();
}

//==============================================================================

double * SimulationData::rates() const
{
    // Return our rates array

    return mRatesArray->data();
}

//==============================================================================

double * SimulationData::states() const
{
    // Return our states array

    return mStatesArray->data();
}

//==============================================================================

double * SimulationData::algebraic() const
{
    // Return our algebraic array

    return mAlgebraicArray->data();
}

//==============================================================================

DataStore::DataStoreValues * SimulationData::constantsValues() const
{
    // Return our constants values

    return mConstantsValues;
}

//==============================================================================

DataStore::DataStoreValues * SimulationData::ratesValues() const
{
    // Return our rates values

    return mRatesValues;
}

//==============================================================================

DataStore::DataStoreValues * SimulationData::statesValues() const
{
    // Return our states values

    return mStatesValues;
}

//==============================================================================

DataStore::DataStoreValues * SimulationData::algebraicValues() const
{
    // Return our algebraic values

    return mAlgebraicValues;
}

//==============================================================================

double * SimulationData::data(DataStore::DataStore *pDataStore) const
{
    // Return our corresponding data array

    return mData.value(pDataStore);
}

//==============================================================================

void SimulationData::importData(DataStore::DataStoreImportData *pImportData)
{
    // Associate an array of doubles to the given data store

    mData.insert(pImportData->importDataStore(), pImportData->resultsValues());
}

//==============================================================================

const quint64 * SimulationData::delay() const
{
    // Return our delay

    return &mDelay;
}

//==============================================================================

void SimulationData::setDelay(quint64 pDelay)
{
    // Set our delay

    mDelay = pDelay;
}

//==============================================================================

double SimulationData::startingPoint() const
{
    // Return our starting point

    return mStartingPoint;
}

//==============================================================================

void SimulationData::setStartingPoint(double pStartingPoint, bool pRecompute)
{
    // Set our starting point

    mStartingPoint = pStartingPoint;

    // Recompute our 'computed constants' and 'variables', i.e. reset ourselves
    // witout initialisation (hence passing false to reset())

    if (pRecompute) {
        reset(false);
    }

    // Let people know that our point data has been updated

    emit pointUpdated();
}

//==============================================================================

double SimulationData::endingPoint() const
{
    // Return our ending point

    return mEndingPoint;
}

//==============================================================================

void SimulationData::setEndingPoint(double pEndingPoint)
{
    // Set our ending point

    mEndingPoint = pEndingPoint;

    // Let people know that our point data has been updated

    emit pointUpdated();
}

//==============================================================================

double SimulationData::pointInterval() const
{
    // Return our point interval

    return mPointInterval;
}

//==============================================================================

void SimulationData::setPointInterval(double pPointInterval)
{
    // Set our point interval

    mPointInterval = pPointInterval;

    // Let people know that our point data has been updated

    emit pointUpdated();
}

//==============================================================================

SolverInterface * SimulationData::solverInterface(const QString &pSolverName) const
{
    // Return the named solver interface, if any

    for (auto solverInterface : Core::solverInterfaces()) {
        if (solverInterface->solverName() == pSolverName) {
            return solverInterface;
        }
    }

    return nullptr;
}

//==============================================================================

SolverInterface * SimulationData::odeSolverInterface() const
{
    // Return our ODE solver interface, if any

    return solverInterface(odeSolverName());
}

//==============================================================================

QString SimulationData::odeSolverName() const
{
    // Return our ODE solver name

    return (mSimulation->runtime() != nullptr)?
                mOdeSolverName:
                QString();
}

//==============================================================================

void SimulationData::setOdeSolverName(const QString &pOdeSolverName)
{
    // Set our ODE solver name and reset its properties

    if ((pOdeSolverName != mOdeSolverName) && (mSimulation->runtime() != nullptr)) {
        mOdeSolverName = pOdeSolverName;

        mOdeSolverProperties.clear();
    }
}

//==============================================================================

Solver::Solver::Properties SimulationData::odeSolverProperties() const
{
    // Return our ODE solver's properties

    return (mSimulation->runtime() != nullptr)?
                mOdeSolverProperties:
                Solver::Solver::Properties();
}

//==============================================================================

void SimulationData::addOdeSolverProperty(const QString &pName,
                                          const QVariant &pValue)
{
    // Add an ODE solver property

    if (mSimulation->runtime() != nullptr) {
        mOdeSolverProperties.insert(pName, pValue);
    }
}

//==============================================================================

SolverInterface * SimulationData::nlaSolverInterface() const
{
    // Return our NLA solver interface, if any

    return solverInterface(nlaSolverName());
}

//==============================================================================

QString SimulationData::nlaSolverName() const
{
    // Return our NLA solver name

    return (   (mSimulation->runtime() != nullptr)
            && mSimulation->runtime()->needNlaSolver())?
                mNlaSolverName:
                QString();
}

//==============================================================================

void SimulationData::setNlaSolverName(const QString &pNlaSolverName,
                                      bool pReset)
{
    // Set our NLA solver name and reset its properties

    if (   (pNlaSolverName != mNlaSolverName)
        && (mSimulation->runtime() != nullptr) && mSimulation->runtime()->needNlaSolver()) {
        mNlaSolverName = pNlaSolverName;

        mNlaSolverProperties.clear();

        // Reset our parameter values, if required
        // Note: to only recompute our 'computed constants' and 'variables' is
        //       not sufficient since some constants may also need to be
        //       reinitialised...

        if (pReset) {
            reset();
        }
    }
}

//==============================================================================

Solver::Solver::Properties SimulationData::nlaSolverProperties() const
{
    // Return our NLA solver's properties

    return (   (mSimulation->runtime() != nullptr)
            && mSimulation->runtime()->needNlaSolver())?
                mNlaSolverProperties:
                Solver::Solver::Properties();
}

//==============================================================================

void SimulationData::addNlaSolverProperty(const QString &pName,
                                          const QVariant &pValue, bool pReset)
{
    // Add an NLA solver property

    if ((   mSimulation->runtime() != nullptr)
         && mSimulation->runtime()->needNlaSolver()) {
        mNlaSolverProperties.insert(pName, pValue);

        // Reset our parameter values, if required
        // Note: to recompute only our 'computed constants' and 'variables' is
        //       not sufficient since some constants may also need to be
        //       reinitialised...

        if (pReset) {
            reset();
        }
    }
}

//==============================================================================

void SimulationData::reset(bool pInitialize, bool pAll)
{
    // Reset our parameter values which means both initialising our 'constants'
    // and computing our 'computed constants' and 'variables'
    // Note #1: we must check whether our runtime needs NLA solver and, if so,
    //          then retrieve an instance of our NLA solver since some of the
    //          resetting may require solving one or several NLA systems...
    // Note #2: recomputeComputedConstantsAndVariables() will let people know
    //          that our data has changed...

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();
    Solver::NlaSolver *nlaSolver = nullptr;

    if (runtime->needNlaSolver()) {
        // Set our NLA solver
        // Note: we unset it at the end of this method...

        nlaSolver = static_cast<Solver::NlaSolver *>(nlaSolverInterface()->solverInstance());

        Solver::setNlaSolver(runtime->address(), nlaSolver);

        // Keep track of any error that might be reported by our NLA solver

        connect(nlaSolver, &Solver::NlaSolver::error,
                this, &SimulationData::error);

        // Initialise our NLA solver

        nlaSolver->setProperties(mNlaSolverProperties);
    }

    // Keep track of our constants (in case we don't want to reset them)

    auto currentConstants = new double[runtime->constantsCount()] {};

    if (!pAll) {
        memcpy(currentConstants, constants(), size_t(runtime->constantsCount())*Solver::SizeOfDouble);
    }

    // Reset our parameter values

    if (pInitialize) {
        mConstantsArray->reset();
        mRatesArray->reset();
        mStatesArray->reset();
        mAlgebraicArray->reset();

        runtime->initializeConstants()(constants(), rates(), states());
    }

    // Recompute our computed constants and variables

    recomputeComputedConstantsAndVariables(mStartingPoint, pInitialize);

    // Keep track of our various initial values

    if (pInitialize) {
        updateInitialValues();
    }

    // Use our "current" constants, if needed

    if (!pAll) {
        memcpy(constants(), currentConstants, size_t(runtime->constantsCount())*Solver::SizeOfDouble);
    }

    delete[] currentConstants;

    // Recompute our computed constants and variables, if we are using our
    // "current" constants

    if (!pAll) {
        recomputeComputedConstantsAndVariables(mStartingPoint, pInitialize);
    }

    // Delete our NLA solver, if any

    if (nlaSolver != nullptr) {
        delete nlaSolver;

        Solver::unsetNlaSolver(runtime->address());
    }

    // Let people know whether our data is clean, i.e. not modified, and ask our
    // simulation worker to reset itself

    if (!pInitialize) {
        emit dataModified(isModified());

        if (mSimulation->worker() != nullptr) {
            mSimulation->worker()->reset();
        }
    }
}

//==============================================================================

void SimulationData::updateInitialValues()
{
    // Update our initial constants and states

    memcpy(mInitialConstants, constants(), size_t(mSimulation->runtime()->constantsCount())*Solver::SizeOfDouble);
    memcpy(mInitialStates, states(), size_t(mSimulation->runtime()->statesCount())*Solver::SizeOfDouble);

    // Let people know that everything has been reset by checking for
    // modifications

    checkForModifications();
}

//==============================================================================

void SimulationData::recomputeComputedConstantsAndVariables(double pCurrentPoint,
                                                            bool pInitialize)
{
    // Recompute our 'computed constants', some 'constant' algebraic variables
    // and our 'variables'

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    runtime->computeComputedConstants()(pCurrentPoint, constants(), rates(),
                                        pInitialize?
                                            states():
                                            mDummyStates,
                                        algebraic());
    runtime->computeRates()(pCurrentPoint, constants(), rates(), states(), algebraic());
    runtime->computeVariables()(pCurrentPoint, constants(), rates(), states(), algebraic());

    // Let people know that our data has been updated

    emit dataUpdated(pCurrentPoint);
}

//==============================================================================

void SimulationData::recomputeVariables(double pCurrentPoint)
{
    // Recompute our 'variables'

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    runtime->computeRates()(pCurrentPoint, constants(), rates(), states(), algebraic());
    runtime->computeVariables()(pCurrentPoint, constants(), rates(), states(), algebraic());
}

//==============================================================================

bool SimulationData::doIsModified(bool pCheckConstants) const
{
    // Check whether any of our constants (if requested) or states has been
    // modified, if possible
    // Note: we start with our states since they are more likely to be modified
    //       than our constants...

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    if (runtime != nullptr) {
        for (quint64 i = 0, iMax = mStatesArray->size(); i < iMax; ++i) {
            if (!qFuzzyCompare(mStatesArray->data(i), mInitialStates[i])) {
                return true;
            }
        }

        if (pCheckConstants) {
            for (quint64 i = 0, iMax = mConstantsArray->size(); i < iMax; ++i) {
                if (!qFuzzyCompare(mConstantsArray->data(i), mInitialConstants[i])) {
                    return true;
                }
            }
        }
    }

    return false;
}

//==============================================================================

bool SimulationData::isStatesModified() const
{
    // Check whether any of our states has been modified

    return doIsModified(false);
}

//==============================================================================

bool SimulationData::isModified() const
{
    // Check whether any of our constants or states has been modified

    return doIsModified(true);
}

//==============================================================================

void SimulationData::checkForModifications()
{
    // Let people know whether any of our constants or states has been modified

    emit dataModified(isModified());
}

//==============================================================================

void SimulationData::updateParameters(SimulationData *pSimulationData)
{
    // Recompute our 'computed constants' and 'variables'

    pSimulationData->reset(false);

    // Let people know that parameters have changed

    emit pSimulationData->dataUpdated(pSimulationData->mStartingPoint);
}

//==============================================================================

void SimulationData::createArrays()
{
    // Create our various arrays, if possible

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    if (runtime != nullptr) {
        // Create our various arrays to compute our model

        mConstantsArray = new DataStore::DataStoreArray(quint64(runtime->constantsCount()));
        mRatesArray = new DataStore::DataStoreArray(quint64(runtime->ratesCount()));
        mStatesArray = new DataStore::DataStoreArray(quint64(runtime->statesCount()));
        mAlgebraicArray = new DataStore::DataStoreArray(quint64(runtime->algebraicCount()));

        // Create our various values to hold our model's arrays

        mConstantsValues = new DataStore::DataStoreValues(mConstantsArray);
        mRatesValues = new DataStore::DataStoreValues(mRatesArray);
        mStatesValues = new DataStore::DataStoreValues(mStatesArray);
        mAlgebraicValues = new DataStore::DataStoreValues(mAlgebraicArray);

        // Create our various arrays to keep track of our various initial values

        mInitialConstants = new double[mConstantsArray->size()];
        mInitialStates = new double[mStatesArray->size()];
        mDummyStates = new double[mStatesArray->size()]{};
    } else {
        mConstantsArray = mRatesArray = mStatesArray = mAlgebraicArray = nullptr;
        mConstantsValues = mRatesValues = mStatesValues = mAlgebraicValues = nullptr;
        mInitialConstants = mInitialStates = mDummyStates = nullptr;
    }
}

//==============================================================================

void SimulationData::deleteArrays()
{
    // Delete our various arrays

    if (mConstantsArray != nullptr) {
        mConstantsArray->release();
    }

    if (mRatesArray != nullptr) {
        mRatesArray->release();
    }

    if (mStatesArray != nullptr) {
        mStatesArray->release();
    }

    if (mAlgebraicArray != nullptr) {
        mAlgebraicArray->release();
    }

    for (auto data : mData) {
        delete[] data;
    }

    mData.clear();

    delete mConstantsValues;
    delete mRatesValues;
    delete mStatesValues;
    delete mAlgebraicValues;

    delete[] mInitialConstants;
    delete[] mInitialStates;
    delete[] mDummyStates;

    // Reset our various arrays
    // Note: this shouldn't be needed, but better be safe than sorry...

    mConstantsArray = mRatesArray = mStatesArray = mAlgebraicArray = nullptr;
    mConstantsValues = mRatesValues = mStatesValues = mAlgebraicValues = nullptr;
    mInitialConstants = mInitialStates = mDummyStates = nullptr;
}

//==============================================================================

SimulationDataUpdatedFunction & SimulationData::simulationDataUpdatedFunction()
{
    // Return our simulation data updated function

    return mSimulationDataUpdatedFunction;
}

//==============================================================================

SimulationResults::SimulationResults(Simulation *pSimulation) :
    SimulationObject(pSimulation)
{
    // Create our data store

    createDataStore();
}

//==============================================================================

SimulationResults::~SimulationResults()
{
    // Delete some internal objects

    deleteDataStore();
}

//==============================================================================

QString SimulationResults::uri(const QStringList &pComponentHierarchy,
                               const QString &pName)
{
    // Generate an URI using the given component hierarchy and name

    QString res = pComponentHierarchy.join('/')+"/"+pName;

    return res.replace('\'', "/prime");
}

//==============================================================================

void SimulationResults::createDataStore()
{
    // Make sure that we have a runtime and a VOI

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    if ((runtime == nullptr) || (runtime->voi() == nullptr)) {
        return;
    }

    // Create our data store

    SimulationData *simulationData = mSimulation->data();

    mDataStore = new DataStore::DataStore(mSimulation->cellmlFile()->xmlBase());

    mPointsVariable = mDataStore->voi();

    mConstantsVariables = mDataStore->addVariables(simulationData->constants(), runtime->constantsCount());
    mRatesVariables = mDataStore->addVariables(simulationData->rates(), runtime->ratesCount());
    mStatesVariables = mDataStore->addVariables(simulationData->states(), runtime->statesCount());
    mAlgebraicVariables = mDataStore->addVariables(simulationData->algebraic(), runtime->algebraicCount());

    // Customise our VOI, as well as our constant, rate, state and algebraic
    // variables

    DataStore::DataStoreValues *constantsValues = simulationData->constantsValues();
    DataStore::DataStoreValues *ratesValues = simulationData->ratesValues();
    DataStore::DataStoreValues *statesValues = simulationData->statesValues();
    DataStore::DataStoreValues *algebraicValues = simulationData->algebraicValues();

    for (auto parameter : runtime->parameters()) {
        CellMLSupport::CellmlFileRuntimeParameter::Type parameterType = parameter->type();
        DataStore::DataStoreVariable *variable = nullptr;
        DataStore::DataStoreValue *value = nullptr;

        if (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::Voi) {
            mPointsVariable->setType(int(parameter->type()));
            mPointsVariable->setUri(uri(runtime->voi()->componentHierarchy(), runtime->voi()->name()));
            mPointsVariable->setLabel(runtime->voi()->name());
            mPointsVariable->setUnit(runtime->voi()->unit());
        } else if (   (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::Constant)
                   || (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::ComputedConstant)) {
            variable = mConstantsVariables[parameter->index()];
            value = constantsValues->at(parameter->index());
        } else if (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::Rate) {
            variable = mRatesVariables[parameter->index()];
            value = ratesValues->at(parameter->index());
        } else if (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::State) {
            variable = mStatesVariables[parameter->index()];
            value = statesValues->at(parameter->index());
        } else if (parameterType == CellMLSupport::CellmlFileRuntimeParameter::Type::Algebraic) {
            variable = mAlgebraicVariables[parameter->index()];
            value = algebraicValues->at(parameter->index());
        }

        if (variable != nullptr) {
            variable->setType(int(parameter->type()));
            variable->setUri(uri(parameter->componentHierarchy(), parameter->formattedName()));
            variable->setLabel(parameter->formattedName());
            variable->setUnit(parameter->formattedUnit(runtime->voi()->unit()));
        }

        if (value != nullptr) {
            value->setUri(uri(parameter->componentHierarchy(), parameter->formattedName()));
        }
    }

    // Reimport our data, if any, and update their array so that it contains the
    // computed values for our start point

    QList<double *> dataKeys = mDataDataStores.keys();

    for (auto data : dataKeys) {
        DataStore::DataStore *importDataStore = mDataDataStores.value(data);
        DataStore::DataStoreVariables variables = mDataStore->addVariables(data, importDataStore->variables().count());

        mData.insert(data, variables);

        DataStore::DataStoreVariable *importVoi = importDataStore->voi();
        DataStore::DataStoreVariables importVariables = importDataStore->variables();

        for (int i = 0, iMax = importVariables.count(); i < iMax; ++i) {
            data[i] = realValue(mSimulation->currentPoint(), importVoi, importVariables[i]);
        }
    }

    // Let people know that our (imported) data, if any, has been updated

    if (!mDataDataStores.isEmpty()) {
        emit simulationData->dataUpdated(mSimulation->currentPoint());
    }
}

//==============================================================================

void SimulationResults::deleteDataStore()
{
    // Delete our data store

    delete mDataStore;

    // Reset our data store and our different data store variable/s
    // Note: this is in case we are not able to recreate a data store...

    mDataStore = nullptr;

    mPointsVariable = nullptr;

    mConstantsVariables = DataStore::DataStoreVariables();
    mRatesVariables = DataStore::DataStoreVariables();
    mStatesVariables = DataStore::DataStoreVariables();
    mAlgebraicVariables = DataStore::DataStoreVariables();

    mData.clear();
}

//==============================================================================

void SimulationResults::reload()
{
    // Reload ourselves by resetting ourselves, this after having cleared all of
    // our imported data stores (since we don't keep track of imported data when
    // reloading a file)

    mDataDataStores.clear();

    reset();
}

//==============================================================================

void SimulationResults::reset()
{
    // Reset our data store by deleting it and then recreating it

    deleteDataStore();
    createDataStore();

    // Let people know that we have been reset

    emit resultsReset();
}

//==============================================================================

void SimulationResults::importData(DataStore::DataStoreImportData *pImportData)
{
    // Make sure that we have a runtime and a VOI

    CellMLSupport::CellmlFileRuntime *runtime = mSimulation->runtime();

    if ((runtime == nullptr) || (runtime->voi() == nullptr)) {
        return;
    }

    // Ask our data and results objects to import the given data

    DataStore::DataStore *importDataStore = pImportData->importDataStore();
    double *resultsValues = pImportData->resultsValues();
    DataStore::DataStoreVariables resultsVariables = pImportData->resultsVariables();

    mData.insert(resultsValues, resultsVariables);
    mDataDataStores.insert(resultsValues, importDataStore);

    // Customise our imported data

    for (auto parameter : runtime->dataParameters(resultsValues)) {
        DataStore::DataStoreVariable *variable = mData.value(parameter->data())[parameter->index()];

        variable->setType(int(parameter->type()));
        variable->setUri(uri(parameter->componentHierarchy(), parameter->formattedName()));
        variable->setLabel(parameter->formattedName());
        variable->setUnit(parameter->formattedUnit(runtime->voi()->unit()));
    }

    // Compute the values of our imported data, so we can plot it straightaway
    // along our other simulation results, if any

    int runsCount = pImportData->runSizes().count();
    DataStore::DataStoreVariable *importVoi = importDataStore->voi();
    DataStore::DataStoreVariables importVariables = pImportData->importVariables();

    if (runsCount != 0) {
        DataStore::DataStoreVariable *resultsVoi = pImportData->resultsDataStore()->voi();

        for (int i = 0; i < runsCount; ++i) {
            // Add the value of our imported data to our the corresponding run

            double *voiValues = resultsVoi->values(i);

            for (quint64 j = 0, jMax = resultsVoi->size(i); j < jMax; ++j) {
                double realPoint = SimulationResults::realPoint(voiValues[j], i);

                for (int k = 0, kMax = resultsVariables.count(); k < kMax; ++k) {
                    resultsVariables[k]->addValue(realValue(realPoint, importVoi, importVariables[k]), i);
                }
            }
        }

        // Update our imported data array so that it contains our latest
        // computed values

        quint64 lastPosition = size()-1;

        for (int i = 0, iMax = resultsVariables.count(); i < iMax; ++i) {
            resultsValues[i] = resultsVariables[i]->value(lastPosition);
        }
    } else {
        // There are no runs, so update our imported data array so that it
        // contains the computed values for our start point

        for (int i = 0, iMax = importVariables.count(); i < iMax; ++i) {
            resultsValues[i] = realValue(mSimulation->currentPoint(), importVoi, importVariables[i]);
        }
    }
}

//==============================================================================

int SimulationResults::runsCount() const
{
    // Return the number of runs held by our data store

    return (mDataStore != nullptr)?
                mDataStore->runsCount():
                0;
}

//==============================================================================

bool SimulationResults::addRun()
{
    // Ask our data store to add a run to itself and let people know about it,
    // if we were able to add one
    // Note: we consider things to be fine if our data store has had no problems
    //       adding a run to itself or if the simulation size is zero...

    quint64 simulationSize = mSimulation->size();

    if (simulationSize != 0) {
        bool res = mDataStore->addRun(simulationSize);

        if (res) {
            emit runAdded();
        }

        return res;
    }

    return true;
}

//==============================================================================

double SimulationResults::realPoint(double pPoint, int pRun) const
{
    // Determine the real value of the given point, if we didn't have several
    // runs, but only one

    double res = 0.0;

    for (int i = 0, iMax = (pRun == -1)?runsCount()-1:pRun; i < iMax; ++i) {
        if (mDataStore->voi()->size(i) != 0) {
            res += mDataStore->voi()->value(mDataStore->voi()->size(i)-1, i);
        }
    }

    res += pPoint;

    return res;
}

//==============================================================================

double SimulationResults::realValue(double pPoint,
                                    DataStore::DataStoreVariable *pVoi,
                                    DataStore::DataStoreVariable *pVariable) const
{
    // Return the value of the given variable at the given point, doing a linear
    // interpolation, if needed

    quint64 first = 0;
    quint64 last = pVoi->size()-1;

    if (   (pPoint < pVoi->value(first))
        || (pPoint > pVoi->value(last))) {
        return qQNaN();
    }

    quint64 middle = 0;
    double middleVoiValue = 0.0;

    while (first <= last) {
        middle = (first+last)/2;
        middleVoiValue = pVoi->value(middle);

        if (middleVoiValue < pPoint) {
            first = middle+1;
        } else if (middleVoiValue > pPoint) {
            last = middle-1;
        } else {
            break;
        }
    }

    if (middleVoiValue < pPoint) {
        double afterVoiValue = pVoi->value(middle+1);
        double afterDataValue = pVariable->value(middle+1);

        return afterDataValue-(afterVoiValue-pPoint)*(afterDataValue-pVariable->value(middle))/(afterVoiValue-middleVoiValue);
    }

    if (middleVoiValue > pPoint) {
        double beforeVoiValue = pVoi->value(middle-1);
        double beforeDataValue = pVariable->value(middle-1);

        return beforeDataValue+(pPoint-beforeVoiValue)*(pVariable->value(middle)-beforeDataValue)/(middleVoiValue-beforeVoiValue);
    }

    return pVariable->value(middle);
}

//==============================================================================

void SimulationResults::addPoint(double pPoint)
{
    // Make sure that all our variables are up to date

    mSimulation->data()->recomputeVariables(pPoint);

    // Make sure that we have the correct imported data values for the given
    // point, keeping in mind that we may have several runs

    QList<double *> dataKeys = mDataDataStores.keys();
    double realPoint = SimulationResults::realPoint(pPoint);

    for (auto data : dataKeys) {
        DataStore::DataStore *dataStore = mDataDataStores.value(data);
        DataStore::DataStoreVariable *voi = dataStore->voi();
        DataStore::DataStoreVariables variables = dataStore->variables();

        for (int i = 0, iMax = variables.count(); i < iMax; ++i) {
            data[i] = realValue(realPoint, voi, variables[i]);
        }
    }

    // Now that we are all set, we can add the data to our data store

    mDataStore->addValues(pPoint);
}

//==============================================================================

quint64 SimulationResults::size(int pRun) const
{
    // Return the size of our data store for the given run

    return (mDataStore != nullptr)?
                mDataStore->size(pRun):
                0;
}

//==============================================================================

DataStore::DataStore * SimulationResults::dataStore() const
{
    // Return our data store

    return mDataStore;
}

//==============================================================================

double * SimulationResults::points(int pRun) const
{
    // Return our points for the given run

    return (mPointsVariable != nullptr)?
                mPointsVariable->values(pRun):
                nullptr;
}

//==============================================================================

double * SimulationResults::constants(int pIndex, int pRun) const
{
    // Return our constants at the given index and for the given run

    return mConstantsVariables.isEmpty()?
                nullptr:
                mConstantsVariables[pIndex]->values(pRun);
}

//==============================================================================

double * SimulationResults::rates(int pIndex, int pRun) const
{
    // Return our rates at the given index and for the given run

    return mRatesVariables.isEmpty()?
                nullptr:
                mRatesVariables[pIndex]->values(pRun);
}

//==============================================================================

double * SimulationResults::states(int pIndex, int pRun) const
{
    // Return our states at the given index and for the given run

    return mStatesVariables.isEmpty()?
                nullptr:
                mStatesVariables[pIndex]->values(pRun);
}

//==============================================================================

double * SimulationResults::algebraic(int pIndex, int pRun) const
{
    // Return our algebraic at the given index and for the given run

    return mAlgebraicVariables.isEmpty()?
                nullptr:
                mAlgebraicVariables[pIndex]->values(pRun);
}

//==============================================================================

double * SimulationResults::data(double *pData, int pIndex, int pRun) const
{
    // Return our data at the given index and for the given run

    DataStore::DataStoreVariables data = mData.value(pData);

    return data.isEmpty()?
                nullptr:
                data[pIndex]->values(pRun);
}

//==============================================================================

DataStore::DataStoreVariable * SimulationResults::pointsVariable() const
{
    // Return our points variable

    return mPointsVariable;
}

//==============================================================================

DataStore::DataStoreVariables SimulationResults::constantsVariables() const
{
    // Return our constants variables

    return mConstantsVariables;
}

//==============================================================================

DataStore::DataStoreVariables SimulationResults::ratesVariables() const
{
    // Return our rates variables

    return mRatesVariables;
}

//==============================================================================

DataStore::DataStoreVariables SimulationResults::statesVariables() const
{
    // Return our states variables

    return mStatesVariables;
}

//==============================================================================

DataStore::DataStoreVariables SimulationResults::algebraicVariables() const
{
    // Return our algebraic variables

    return mAlgebraicVariables;
}

//==============================================================================

SimulationImportData::SimulationImportData(Simulation *pSimulation) :
    SimulationObject(pSimulation)
{
}

//==============================================================================

SimulationImportData::~SimulationImportData()
{
    // Delete some internal objects

    for (auto dataStore : mDataStores) {
        delete dataStore;
    }
}

//==============================================================================

DataStore::DataStore * SimulationImportData::addDataStore()
{
    // Add a data store to our list and return it

    auto dataStore = new DataStore::DataStore();

    if (dataStore != nullptr) {
        mDataStores << dataStore;
    }

    return dataStore;
}

//==============================================================================

Simulation::Simulation(const QString &pFileName) :
    mFileName(pFileName)
{
    // Retrieve our file details

    retrieveFileDetails();

    // Create our data and results objects, now that we are all set

    mData = new SimulationData(this);
    mResults = new SimulationResults(this);
    mImportData = new SimulationImportData(this);

    // Keep track of any error occurring in our data

    connect(mData, &SimulationData::error,
            this, &Simulation::error);

    // Keep track of files being managed

    connect(Core::FileManager::instance(), &Core::FileManager::fileManaged,
            this, &Simulation::fileManaged);
}

//==============================================================================

Simulation::~Simulation()
{
    // Stop our worker

    stop();

    // Delete some internal objects

    delete mRuntime;

    delete mImportData;
    delete mResults;
    delete mData;
}

//==============================================================================

#include "initializesolver.cpp.inl"

//==============================================================================

QString Simulation::furtherInitialize() const
{
    // Initialise ourself from a SED-ML document
    // Note: make sure that this is in relative sync with
    //       SimulationExperimentViewSimulationWidget::furtherInitialize()...

    libsedml::SedDocument *sedmlDocument = sedmlFile()->sedmlDocument();
    auto sedmlUniformTimeCourse = static_cast<libsedml::SedUniformTimeCourse *>(sedmlDocument->getSimulation(0));
    auto sedmlOneStep = static_cast<libsedml::SedOneStep *>(sedmlDocument->getSimulation(1));
    double startingPoint = sedmlUniformTimeCourse->getOutputStartTime();
    double endingPoint = sedmlUniformTimeCourse->getOutputEndTime();
    double pointInterval = (endingPoint-startingPoint)/sedmlUniformTimeCourse->getNumberOfPoints();

    if (sedmlOneStep != nullptr) {
        endingPoint += sedmlOneStep->getStep();
    }

    mData->setStartingPoint(startingPoint);
    mData->setEndingPoint(endingPoint);
    mData->setPointInterval(pointInterval);

    libsedml::SedAlgorithm *sedmlAlgorithm = sedmlUniformTimeCourse->getAlgorithm();
    QString kisaoId = QString::fromStdString(sedmlAlgorithm->getKisaoID());
    QString error = initializeSolver(sedmlAlgorithm->getListOfAlgorithmParameters(),
                                     kisaoId);

    if (!error.isEmpty()) {
        return error;
    }

    libsbml::XMLNode *annotation = sedmlUniformTimeCourse->getAnnotation();

    if (annotation != nullptr) {
        bool mustHaveNlaSolver = false;
        bool hasNlaSolver = false;
        QString nlaSolverName = QString();

        for (uint i = 0, iMax = annotation->getNumChildren(); i < iMax; ++i) {
            libsbml::XMLNode &nlaSolverNode = annotation->getChild(i);

            if (   (QString::fromStdString(nlaSolverNode.getURI()) == SEDMLSupport::OpencorNamespace)
                && (QString::fromStdString(nlaSolverNode.getName()) == SEDMLSupport::NlaSolver)) {
                mustHaveNlaSolver = true;
                nlaSolverName = QString::fromStdString(nlaSolverNode.getAttrValue(nlaSolverNode.getAttrIndex(SEDMLSupport::Name.toStdString())));

                for (auto solverInterface : Core::solverInterfaces()) {
                    if (nlaSolverName == solverInterface->solverName()) {
                        mData->setNlaSolverName(nlaSolverName);

                        hasNlaSolver = true;

                        break;
                    }
                }

                if (hasNlaSolver) {
                    for (uint j = 0, jMax = nlaSolverNode.getNumChildren(); j < jMax; ++j) {
                        libsbml::XMLNode &solverPropertyNode = nlaSolverNode.getChild(j);

                        if (   (QString::fromStdString(solverPropertyNode.getURI()) == SEDMLSupport::OpencorNamespace)
                            && (QString::fromStdString(solverPropertyNode.getName()) == SEDMLSupport::SolverProperty)) {
                            QString id = QString::fromStdString(solverPropertyNode.getAttrValue(solverPropertyNode.getAttrIndex(SEDMLSupport::Id.toStdString())));
                            QString value = QString::fromStdString(solverPropertyNode.getAttrValue(solverPropertyNode.getAttrIndex(SEDMLSupport::Value.toStdString())));

                            mData->addNlaSolverProperty(id, value);
                        }
                    }

                    break;
                }
            }
        }

        if (mustHaveNlaSolver && !hasNlaSolver) {
            return tr("the requested solver (%1) could not be found").arg(nlaSolverName);
        }
    }

    return {};
}

//==============================================================================

void Simulation::retrieveFileDetails(bool pRecreateRuntime)
{
    // Retrieve our CellML and SED-ML files, as well as COMBINE archive

    mCellmlFile = CellMLSupport::CellmlFileManager::instance()->cellmlFile(mFileName);
    mSedmlFile = (mCellmlFile != nullptr)?
                     nullptr:
                     SEDMLSupport::SedmlFileManager::instance()->sedmlFile(mFileName);
    mCombineArchive = (mSedmlFile != nullptr)?
                          nullptr:
                          COMBINESupport::CombineFileManager::instance()->combineArchive(mFileName);

    // Determine the type of our file

    mFileType = (mCellmlFile != nullptr)?
                    FileType::CellmlFile:
                    (mSedmlFile != nullptr)?
                        FileType::SedmlFile:
                        FileType::CombineArchive;

    // We have a COMBINE archive, so we need to retrieve its corresponding
    // SED-ML file

    if (mCombineArchive != nullptr) {
        mSedmlFile = mCombineArchive->sedmlFile();
    }

    // We have a SED-ML file (either a direct one or through a COMBINE archive),
    // so we need to retrieve its corresponding CellML file

    if (mSedmlFile != nullptr) {
        mCellmlFile = mSedmlFile->cellmlFile();
    }

    // Get a (new) runtime or update it, if possible
    // Note: updating our runtime is essential when saving a file under a new
    //       name...

    if (pRecreateRuntime) {
        delete mRuntime;

        mRuntime = (mCellmlFile != nullptr)?
                       mCellmlFile->runtime():
                       nullptr;
    } else {
        if ((mCellmlFile != nullptr) && (mRuntime != nullptr)) {
            mRuntime->update(mCellmlFile, false);
        }
    }

    // Update our issues, if we had previously checked for them

    if (!mNeedCheckIssues) {
        mNeedCheckIssues = true;

        checkIssues();
    }
}

//==============================================================================

QString Simulation::fileName() const
{
    // Return our file name

    return mFileName;
}

//==============================================================================

void Simulation::save()
{
    // Retrieve our file details

    bool needReloading = mRuntime == nullptr;

    retrieveFileDetails(false);

    // Ask our data and results to update themselves, if needed
    // Note: this is, for example, needed when we open an invalid file (in which
    //       case mRuntime is null), fix it (resulting in a valid mRuntime
    //       value) and then save it...

    if (needReloading) {
        mData->reload();
        mResults->reload();
    }

    // Make sure that our initial values are up to date and check for
    // modifications (which results in people being told that there are no
    // modifications, meaning that a view like the Simulation Experiment view
    // will disable its reset buttons), but only if we have / still have a
    // runtime

    if (mRuntime != nullptr) {
        mData->updateInitialValues();
    }
}

//==============================================================================

void Simulation::reload()
{
    // Stop our worker
    // Note: we don't need to delete mWorker since it will be done as part of
    //       its thread being stopped...

    stop();

    // Retrieve our file details

    retrieveFileDetails();

    // Ask our data and results to update themselves

    mData->reload();
    mResults->reload();
}

//==============================================================================

void Simulation::rename(const QString &pFileName)
{
    // Rename ourselves by simply updating our file name

    mFileName = pFileName;
}

//==============================================================================

void Simulation::checkIssues()
{
    // Make sure that we haven't already checked for issues

    if (!mNeedCheckIssues) {
        return;
    }

    // Reset our issues

    mNeedCheckIssues = false;
    mIssues = SimulationIssues();
    mHasBlockingIssues = false;

    // Determine whether we have issues with our SED-ML and our COMBINE archive

    SEDMLSupport::SedmlFileIssues sedmlFileIssues = (mSedmlFile != nullptr)?
                                                        mSedmlFile->issues():
                                                        SEDMLSupport::SedmlFileIssues();
    COMBINESupport::CombineArchiveIssues combineArchiveIssues = (mCombineArchive != nullptr)?
                                                                    mCombineArchive->issues():
                                                                    COMBINESupport::CombineArchiveIssues();

    if (!combineArchiveIssues.isEmpty()) {
        // There is one or several issues with our COMBINE archive, so list
        // it/them

        for (const auto &combineArchiveIssue : combineArchiveIssues) {
            SimulationIssue::Type issueType = SimulationIssue::Type::Fatal;

            switch (combineArchiveIssue.type()) {
            case COMBINESupport::CombineArchiveIssue::Type::Information:
                issueType = SimulationIssue::Type::Information;

                break;
            case COMBINESupport::CombineArchiveIssue::Type::Error:
                issueType = SimulationIssue::Type::Error;

                mHasBlockingIssues = true;

                break;
            case COMBINESupport::CombineArchiveIssue::Type::Warning:
                issueType = SimulationIssue::Type::Warning;

                break;
            case COMBINESupport::CombineArchiveIssue::Type::Fatal:
                issueType = SimulationIssue::Type::Fatal;

                mHasBlockingIssues = true;

                break;
            }

            mIssues.append(SimulationIssue(issueType, combineArchiveIssue.message()));
        }
    }

    if (!sedmlFileIssues.isEmpty()) {
        // There is one or several issues with our SED-ML file, so list it/them

        for (const auto &sedmlFileIssue : sedmlFileIssues) {
            SimulationIssue::Type issueType = SimulationIssue::Type::Fatal;

            switch (sedmlFileIssue.type()) {
            case SEDMLSupport::SedmlFileIssue::Type::Information:
                issueType = SimulationIssue::Type::Information;

                break;
            case SEDMLSupport::SedmlFileIssue::Type::Error:
                issueType = SimulationIssue::Type::Error;

                mHasBlockingIssues = true;

                break;
            case SEDMLSupport::SedmlFileIssue::Type::Warning:
                issueType = SimulationIssue::Type::Warning;

                break;
            case SEDMLSupport::SedmlFileIssue::Type::Fatal:
                issueType = SimulationIssue::Type::Fatal;

                mHasBlockingIssues = true;

                break;
            }

            mIssues.append(SimulationIssue(issueType,
                                           sedmlFileIssue.line(),
                                           sedmlFileIssue.column(),
                                           sedmlFileIssue.message()));
        }
    }

    if (!mHasBlockingIssues) {
        bool validRuntime = (mRuntime != nullptr) && mRuntime->isValid();
        CellMLSupport::CellmlFileRuntimeParameter *voi = validRuntime?
                                                             mRuntime->voi():
                                                             nullptr;

        if (voi == nullptr) {
            // We couldn't retrieve a VOI, which means that we either don't have
            // a runtime or we have one, but it's not valid or it's valid but we
            // really don't have a VOI
            // Note: in the case of a valid runtime and no VOI, we really
            //       shouldn't consider the runtime to be valid, hence we handle
            //       this case here...

            if (validRuntime) {
                // We have a valid runtime, but no VOI, which means that the
                // model doesn't contain any ODE or DAE

                mIssues.append(SimulationIssue(SimulationIssue::Type::Error, tr("The model must have at least one ODE or DAE.")));
            } else {
                // We don't have a valid runtime, so either there are some
                // problems with the CellML file, its runtime, or even the
                // parent SED-ML file and/or COMBINE archive
                // Note: in the case of problems with the SED-ML file and/or
                //       COMBINE archive, we will already have listed the
                //       problems, so no need to do anything more in those
                //       cases...

                if (sedmlFileIssues.isEmpty() && combineArchiveIssues.isEmpty()) {
                    for (const auto &issue : (mRuntime != nullptr)?
                                                 mRuntime->issues():
                                                 (mCellmlFile != nullptr)?
                                                     mCellmlFile->issues():
                                                     CellMLSupport::CellmlFileIssues()) {
                        mIssues.append(SimulationIssue((issue.type() == CellMLSupport::CellmlFileIssue::Type::Error)?
                                                           SimulationIssue::Type::Error:
                                                           SimulationIssue::Type::Warning,
                                                       issue.message()));
                    }
                }
            }
        }
    }
}

//==============================================================================

SimulationIssues Simulation::issues()
{
    // Return our issues, after having checked for them

    checkIssues();

    return mIssues;
}

//==============================================================================

bool Simulation::hasBlockingIssues()
{
    // Return whether we have blocking issues, after having checked for them

    checkIssues();

    return mHasBlockingIssues;
}

//==============================================================================

CellMLSupport::CellmlFileRuntime * Simulation::runtime() const
{
    // Return our runtime

    return mRuntime;
}

//==============================================================================

SimulationWorker * Simulation::worker() const
{
    // Return our worker

    return mWorker;
}

//==============================================================================

Simulation::FileType Simulation::fileType() const
{
    // Return our file type

    return mFileType;
}

//==============================================================================

CellMLSupport::CellmlFile * Simulation::cellmlFile() const
{
    // Return our CellML file object

    return mCellmlFile;
}

//==============================================================================

SEDMLSupport::SedmlFile * Simulation::sedmlFile() const
{
    // Return our SED-ML file object

    return mSedmlFile;
}

//==============================================================================

COMBINESupport::CombineArchive * Simulation::combineArchive() const
{
    // Return our COBMINE archive object

    return mCombineArchive;
}

//==============================================================================

SimulationData * Simulation::data() const
{
    // Return our data

    return mData;
}

//==============================================================================

SimulationResults * Simulation::results() const
{
    // Return our results

    return mResults;
}

//==============================================================================

SimulationImportData * Simulation::importData() const
{
    // Return our imported data

    return mImportData;
}

//==============================================================================

void Simulation::importData(DataStore::DataStoreImportData *pImportData)
{
    // Make sure that we have a runtime

    if (mRuntime == nullptr) {
        return;
    }

    // Ask our data and results objects to import the given data

    mData->importData(pImportData);
    mResults->importData(pImportData);

    // Ask our runtime to import the given data

    QStringList hierarchy = pImportData->hierarchy();
    double *resultsValues = pImportData->resultsValues();

    for (int i = 0, iMax = pImportData->nbOfVariables(); i < iMax; ++i) {
        mRuntime->importData(QString("data_%1").arg(i+1), hierarchy, i, resultsValues);
    }
}

//==============================================================================

int Simulation::runsCount() const
{
    // Return the number of runs held by our results

    return (mResults != nullptr)?
                mResults->runsCount():
                0;
}

//==============================================================================

quint64 Simulation::runSize(int pRun) const
{
    // Return the size of the data store for the given run

    return (mResults != nullptr)?
                mResults->size(pRun):
                0;
}

//==============================================================================

bool Simulation::addRun()
{
    // Ask our results to add a run

    return (mResults != nullptr)?
                mResults->addRun():
                false;
}

//==============================================================================

bool Simulation::isRunning() const
{
    // Return whether we are running

    return (mWorker != nullptr)?
                mWorker->isRunning():
                false;
}

//==============================================================================

bool Simulation::isPaused() const
{
    // Return whether we are paused

    return (mWorker != nullptr)?
                mWorker->isPaused():
                false;
}

//==============================================================================

double Simulation::currentPoint() const
{
    // Return our current point

    return (mWorker != nullptr)?
                mWorker->currentPoint():
                data()->startingPoint();
}

//==============================================================================

const quint64 * Simulation::delay() const
{
    // Return our delay

    return mData->delay();
}

//==============================================================================

void Simulation::setDelay(quint64 pDelay)
{
    // Set our delay

    mData->setDelay(pDelay);
}

//==============================================================================

bool Simulation::simulationSettingsOk(bool pEmitSignal)
{
    // Check and return whether our simulation settings are sound

    if (qFuzzyCompare(mData->startingPoint(), mData->endingPoint())) {
        if (pEmitSignal) {
            emit error(tr("the starting and ending points cannot have the same value"));
        }

        return false;
    }

    if (mData->startingPoint() > mData->endingPoint()) {
        if (pEmitSignal) {
            emit error(tr("the starting point cannot be greater than the ending point"));
        }

        return false;
    }

    return true;
}

//==============================================================================

quint64 Simulation::size()
{
    // Return the size of our simulation (i.e. the number of data points that
    // should be generated), if possible

    if (simulationSettingsOk(false)) {
        return quint64(ceil((mData->endingPoint()-mData->startingPoint())/mData->pointInterval())+1.0);
    }

    return 0;
}

//==============================================================================

void Simulation::run()
{
    // Make sure that we have a runtime

    if (mRuntime == nullptr) {
        return;
    }

    // Initialise our worker, if we don't already have one and if the simulation
    // settings we were given are sound

    if ((mWorker == nullptr) && simulationSettingsOk()) {
        // Create and move our worker to a thread

        auto thread = new QThread();
        mWorker = new SimulationWorker(this, thread, mWorker);

        mWorker->moveToThread(thread);

        connect(thread, &QThread::started,
                mWorker, &SimulationWorker::run);

        connect(mWorker, &SimulationWorker::running,
                this, &Simulation::running);
        connect(mWorker, &SimulationWorker::paused,
                this, &Simulation::paused);

        connect(mWorker, &SimulationWorker::done,
                this, &Simulation::done);
        connect(mWorker, &SimulationWorker::done,
                thread, &QThread::quit);
        connect(mWorker, &SimulationWorker::done,
                mWorker, &SimulationWorker::deleteLater);

        connect(mWorker, &SimulationWorker::error,
                this, &Simulation::error);

        connect(thread, &QThread::finished,
                thread, &QThread::deleteLater);

        // Start our worker by starting the thread in which it is

        thread->start();
    }
}

//==============================================================================

void Simulation::pause()
{
    // Pause our worker

    if (mWorker != nullptr) {
        mWorker->pause();
    }
}

//==============================================================================

void Simulation::resume()
{
    // Resume our worker

    if (mWorker != nullptr) {
        mWorker->resume();
    }
}

//==============================================================================

void Simulation::stop()
{
    // Stop our worker

    if (mWorker != nullptr) {
        mWorker->stop();
    }
}

//==============================================================================

void Simulation::reset(bool pAll)
{
    // Reset our data

    mData->reset(true, pAll);

    // Reset our worker

    if (mWorker != nullptr) {
        mWorker->reset();
    }
}

//==============================================================================

void Simulation::fileManaged(const QString &pFileName)
{
    // A file is being managed, so update our internals by retrieving our file
    // details, if we are that file
    // Note: this will happen when saving a file under a new name, in which case
    //       we need to update our internals...

    if (pFileName == mFileName) {
        retrieveFileDetails(false);
    }
}

//==============================================================================

} // namespace SimulationSupport
} // namespace OpenCOR

//==============================================================================
// End of file
//==============================================================================