imgproc.hpp

/*M///////////////////////////////////////////////////////////////////////////////////////
//
//  IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
//  By downloading, copying, installing or using the software you agree to this license.
//  If you do not agree to this license, do not download, install,
//  copy or use the software.
//
//
//                           License Agreement
//                For Open Source Computer Vision Library
//
// Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
// Copyright (C) 2009, Willow Garage Inc., all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
//   * Redistribution's of source code must retain the above copyright notice,
//     this list of conditions and the following disclaimer.
//
//   * Redistribution's in binary form must reproduce the above copyright notice,
//     this list of conditions and the following disclaimer in the documentation
//     and/or other materials provided with the distribution.
//
//   * The name of the copyright holders may not be used to endorse or promote products
//     derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/

#ifndef OPENCV_IMGPROC_HPP
#define OPENCV_IMGPROC_HPP

#include "opencv2/core.hpp"

/**
  @defgroup imgproc Image Processing

This module includes image-processing functions.

  @{
    @defgroup imgproc_filter Image Filtering

Functions and classes described in this section are used to perform various linear or non-linear
filtering operations on 2D images (represented as Mat's). It means that for each pixel location
\f$(x,y)\f$ in the source image (normally, rectangular), its neighborhood is considered and used to
compute the response. In case of a linear filter, it is a weighted sum of pixel values. In case of
morphological operations, it is the minimum or maximum values, and so on. The computed response is
stored in the destination image at the same location \f$(x,y)\f$. It means that the output image
will be of the same size as the input image. Normally, the functions support multi-channel arrays,
in which case every channel is processed independently. Therefore, the output image will also have
the same number of channels as the input one.

Another common feature of the functions and classes described in this section is that, unlike
simple arithmetic functions, they need to extrapolate values of some non-existing pixels. For
example, if you want to smooth an image using a Gaussian \f$3 \times 3\f$ filter, then, when
processing the left-most pixels in each row, you need pixels to the left of them, that is, outside
of the image. You can let these pixels be the same as the left-most image pixels ("replicated
border" extrapolation method), or assume that all the non-existing pixels are zeros ("constant
border" extrapolation method), and so on. OpenCV enables you to specify the extrapolation method.
For details, see #BorderTypes

@anchor filter_depths
### Depth combinations
Input depth (src.depth()) | Output depth (ddepth)
--------------------------|----------------------
CV_8U                     | -1/CV_16S/CV_32F/CV_64F
CV_16U/CV_16S             | -1/CV_32F/CV_64F
CV_32F                    | -1/CV_32F/CV_64F
CV_64F                    | -1/CV_64F

@note when ddepth=-1, the output image will have the same depth as the source.

    @defgroup imgproc_transform Geometric Image Transformations

The functions in this section perform various geometrical transformations of 2D images. They do not
change the image content but deform the pixel grid and map this deformed grid to the destination
image. In fact, to avoid sampling artifacts, the mapping is done in the reverse order, from
destination to the source. That is, for each pixel \f$(x, y)\f$ of the destination image, the
functions compute coordinates of the corresponding "donor" pixel in the source image and copy the
pixel value:

\f[\texttt{dst} (x,y)= \texttt{src} (f_x(x,y), f_y(x,y))\f]

In case when you specify the forward mapping \f$\left<g_x, g_y\right>: \texttt{src} \rightarrow
\texttt{dst}\f$, the OpenCV functions first compute the corresponding inverse mapping
\f$\left<f_x, f_y\right>: \texttt{dst} \rightarrow \texttt{src}\f$ and then use the above formula.

The actual implementations of the geometrical transformations, from the most generic remap and to
the simplest and the fastest resize, need to solve two main problems with the above formula:

- Extrapolation of non-existing pixels. Similarly to the filtering functions described in the
previous section, for some \f$(x,y)\f$, either one of \f$f_x(x,y)\f$, or \f$f_y(x,y)\f$, or both
of them may fall outside of the image. In this case, an extrapolation method needs to be used.
OpenCV provides the same selection of extrapolation methods as in the filtering functions. In
addition, it provides the method #BORDER_TRANSPARENT. This means that the corresponding pixels in
the destination image will not be modified at all.

- Interpolation of pixel values. Usually \f$f_x(x,y)\f$ and \f$f_y(x,y)\f$ are floating-point
numbers. This means that \f$\left<f_x, f_y\right>\f$ can be either an affine or perspective
transformation, or radial lens distortion correction, and so on. So, a pixel value at fractional
coordinates needs to be retrieved. In the simplest case, the coordinates can be just rounded to the
nearest integer coordinates and the corresponding pixel can be used. This is called a
nearest-neighbor interpolation. However, a better result can be achieved by using more
sophisticated [interpolation methods](http://en.wikipedia.org/wiki/Multivariate_interpolation) ,
where a polynomial function is fit into some neighborhood of the computed pixel \f$(f_x(x,y),
f_y(x,y))\f$, and then the value of the polynomial at \f$(f_x(x,y), f_y(x,y))\f$ is taken as the
interpolated pixel value. In OpenCV, you can choose between several interpolation methods. See
resize for details.

@note The geometrical transformations do not work with `CV_8S` or `CV_32S` images.

    @defgroup imgproc_misc Miscellaneous Image Transformations
    @defgroup imgproc_draw Drawing Functions

Drawing functions work with matrices/images of arbitrary depth. The boundaries of the shapes can be
rendered with antialiasing (implemented only for 8-bit images for now). All the functions include
the parameter color that uses an RGB value (that may be constructed with the Scalar constructor )
for color images and brightness for grayscale images. For color images, the channel ordering is
normally *Blue, Green, Red*. This is what imshow, imread, and imwrite expect. So, if you form a
color using the Scalar constructor, it should look like:

\f[\texttt{Scalar} (blue \_ component, green \_ component, red \_ component[, alpha \_ component])\f]

If you are using your own image rendering and I/O functions, you can use any channel ordering. The
drawing functions process each channel independently and do not depend on the channel order or even
on the used color space. The whole image can be converted from BGR to RGB or to a different color
space using cvtColor .

If a drawn figure is partially or completely outside the image, the drawing functions clip it. Also,
many drawing functions can handle pixel coordinates specified with sub-pixel accuracy. This means
that the coordinates can be passed as fixed-point numbers encoded as integers. The number of
fractional bits is specified by the shift parameter and the real point coordinates are calculated as
\f$\texttt{Point}(x,y)\rightarrow\texttt{Point2f}(x*2^{-shift},y*2^{-shift})\f$ . This feature is
especially effective when rendering antialiased shapes.

@note The functions do not support alpha-transparency when the target image is 4-channel. In this
case, the color[3] is simply copied to the repainted pixels. Thus, if you want to paint
semi-transparent shapes, you can paint them in a separate buffer and then blend it with the main
image.

    @defgroup imgproc_color_conversions Color Space Conversions
    @defgroup imgproc_colormap ColorMaps in OpenCV

The human perception isn't built for observing fine changes in grayscale images. Human eyes are more
sensitive to observing changes between colors, so you often need to recolor your grayscale images to
get a clue about them. OpenCV now comes with various colormaps to enhance the visualization in your
computer vision application.

In OpenCV you only need applyColorMap to apply a colormap on a given image. The following sample
code reads the path to an image from command line, applies a Jet colormap on it and shows the
result:

@include snippets/imgproc_applyColorMap.cpp

@see #ColormapTypes

    @defgroup imgproc_subdiv2d Planar Subdivision

The Subdiv2D class described in this section is used to perform various planar subdivision on
a set of 2D points (represented as vector of Point2f). OpenCV subdivides a plane into triangles
using the Delaunay's algorithm, which corresponds to the dual graph of the Voronoi diagram.
In the figure below, the Delaunay's triangulation is marked with black lines and the Voronoi
diagram with red lines.

![Delaunay triangulation (black) and Voronoi (red)](pics/delaunay_voronoi.png)

The subdivisions can be used for the 3D piece-wise transformation of a plane, morphing, fast
location of points on the plane, building special graphs (such as NNG,RNG), and so forth.

    @defgroup imgproc_hist Histograms
    @defgroup imgproc_shape Structural Analysis and Shape Descriptors
    @defgroup imgproc_motion Motion Analysis and Object Tracking
    @defgroup imgproc_feature Feature Detection
    @defgroup imgproc_object Object Detection
    @defgroup imgproc_segmentation Image Segmentation
    @defgroup imgproc_c C API
    @defgroup imgproc_hal Hardware Acceleration Layer
    @{
        @defgroup imgproc_hal_functions Functions
        @defgroup imgproc_hal_interface Interface
    @}
  @}
*/

namespace cv
{

/** @addtogroup imgproc
@{
*/

//! @addtogroup imgproc_filter
//! @{

enum SpecialFilter {
    FILTER_SCHARR = -1
};

//! type of morphological operation
enum MorphTypes{
    MORPH_ERODE    = 0, //!< see #erode
    MORPH_DILATE   = 1, //!< see #dilate
    MORPH_OPEN     = 2, //!< an opening operation
                        //!< \f[\texttt{dst} = \mathrm{open} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \mathrm{erode} ( \texttt{src} , \texttt{element} ))\f]
    MORPH_CLOSE    = 3, //!< a closing operation
                        //!< \f[\texttt{dst} = \mathrm{close} ( \texttt{src} , \texttt{element} )= \mathrm{erode} ( \mathrm{dilate} ( \texttt{src} , \texttt{element} ))\f]
    MORPH_GRADIENT = 4, //!< a morphological gradient
                        //!< \f[\texttt{dst} = \mathrm{morph\_grad} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \texttt{src} , \texttt{element} )- \mathrm{erode} ( \texttt{src} , \texttt{element} )\f]
    MORPH_TOPHAT   = 5, //!< "top hat"
                        //!< \f[\texttt{dst} = \mathrm{tophat} ( \texttt{src} , \texttt{element} )= \texttt{src} - \mathrm{open} ( \texttt{src} , \texttt{element} )\f]
    MORPH_BLACKHAT = 6, //!< "black hat"
                        //!< \f[\texttt{dst} = \mathrm{blackhat} ( \texttt{src} , \texttt{element} )= \mathrm{close} ( \texttt{src} , \texttt{element} )- \texttt{src}\f]
    MORPH_HITMISS  = 7  //!< "hit or miss"
                        //!<   .- Only supported for CV_8UC1 binary images. A tutorial can be found in the documentation
};

//! shape of the structuring element
enum MorphShapes {
    MORPH_RECT    = 0, //!< a rectangular structuring element:  \f[E_{ij}=1\f]
    MORPH_CROSS   = 1, //!< a cross-shaped structuring element:
                       //!< \f[E_{ij} = \begin{cases} 1 & \texttt{if } {i=\texttt{anchor.y } {or } {j=\texttt{anchor.x}}} \\0 & \texttt{otherwise} \end{cases}\f]
    MORPH_ELLIPSE = 2 //!< an elliptic structuring element, that is, a filled ellipse inscribed
                      //!< into the rectangle Rect(0, 0, esize.width, 0.esize.height)
};

//! @} imgproc_filter

//! @addtogroup imgproc_transform
//! @{

//! interpolation algorithm
enum InterpolationFlags{
    /** nearest neighbor interpolation */
    INTER_NEAREST        = 0,
    /** bilinear interpolation */
    INTER_LINEAR         = 1,
    /** bicubic interpolation */
    INTER_CUBIC          = 2,
    /** resampling using pixel area relation. It may be a preferred method for image decimation, as
    it gives moire'-free results. But when the image is zoomed, it is similar to the INTER_NEAREST
    method. */
    INTER_AREA           = 3,
    /** Lanczos interpolation over 8x8 neighborhood */
    INTER_LANCZOS4       = 4,
    /** Bit exact bilinear interpolation */
    INTER_LINEAR_EXACT = 5,
    /** Bit exact nearest neighbor interpolation. This will produce same results as
    the nearest neighbor method in PIL, scikit-image or Matlab. */
    INTER_NEAREST_EXACT  = 6,
    /** mask for interpolation codes */
    INTER_MAX            = 7,
    /** flag, fills all of the destination image pixels. If some of them correspond to outliers in the
    source image, they are set to zero */
    WARP_FILL_OUTLIERS   = 8,
    /** flag, inverse transformation

    For example, #linearPolar or #logPolar transforms:
    - flag is __not__ set: \f$dst( \rho , \phi ) = src(x,y)\f$
    - flag is set: \f$dst(x,y) = src( \rho , \phi )\f$
    */
    WARP_INVERSE_MAP     = 16
};

/** \brief Specify the polar mapping mode
@sa warpPolar
*/
enum WarpPolarMode
{
    WARP_POLAR_LINEAR = 0, ///< Remaps an image to/from polar space.
    WARP_POLAR_LOG = 256   ///< Remaps an image to/from semilog-polar space.
};

enum InterpolationMasks {
       INTER_BITS      = 5,
       INTER_BITS2     = INTER_BITS * 2,
       INTER_TAB_SIZE  = 1 << INTER_BITS,
       INTER_TAB_SIZE2 = INTER_TAB_SIZE * INTER_TAB_SIZE
     };

//! @} imgproc_transform

//! @addtogroup imgproc_misc
//! @{

//! Distance types for Distance Transform and M-estimators
//! @see distanceTransform, fitLine
enum DistanceTypes {
    DIST_USER    = -1,  //!< User defined distance
    DIST_L1      = 1,   //!< distance = |x1-x2| + |y1-y2|
    DIST_L2      = 2,   //!< the simple euclidean distance
    DIST_C       = 3,   //!< distance = max(|x1-x2|,|y1-y2|)
    DIST_L12     = 4,   //!< L1-L2 metric: distance = 2(sqrt(1+x*x/2) - 1))
    DIST_FAIR    = 5,   //!< distance = c^2(|x|/c-log(1+|x|/c)), c = 1.3998
    DIST_WELSCH  = 6,   //!< distance = c^2/2(1-exp(-(x/c)^2)), c = 2.9846
    DIST_HUBER   = 7    //!< distance = |x|<c ? x^2/2 : c(|x|-c/2), c=1.345
};

//! Mask size for distance transform
enum DistanceTransformMasks {
    DIST_MASK_3       = 3, //!< mask=3
    DIST_MASK_5       = 5, //!< mask=5
    DIST_MASK_PRECISE = 0  //!<
};

//! type of the threshold operation
//! ![threshold types](pics/threshold.png)
enum ThresholdTypes {
    THRESH_BINARY     = 0, //!< \f[\texttt{dst} (x,y) =  \fork{\texttt{maxval}}{if \(\texttt{src}(x,y) > \texttt{thresh}\)}{0}{otherwise}\f]
    THRESH_BINARY_INV = 1, //!< \f[\texttt{dst} (x,y) =  \fork{0}{if \(\texttt{src}(x,y) > \texttt{thresh}\)}{\texttt{maxval}}{otherwise}\f]
    THRESH_TRUNC      = 2, //!< \f[\texttt{dst} (x,y) =  \fork{\texttt{threshold}}{if \(\texttt{src}(x,y) > \texttt{thresh}\)}{\texttt{src}(x,y)}{otherwise}\f]
    THRESH_TOZERO     = 3, //!< \f[\texttt{dst} (x,y) =  \fork{\texttt{src}(x,y)}{if \(\texttt{src}(x,y) > \texttt{thresh}\)}{0}{otherwise}\f]
    THRESH_TOZERO_INV = 4, //!< \f[\texttt{dst} (x,y) =  \fork{0}{if \(\texttt{src}(x,y) > \texttt{thresh}\)}{\texttt{src}(x,y)}{otherwise}\f]
    THRESH_MASK       = 7,
    THRESH_OTSU       = 8, //!< flag, use Otsu algorithm to choose the optimal threshold value
    THRESH_TRIANGLE   = 16 //!< flag, use Triangle algorithm to choose the optimal threshold value
};

//! adaptive threshold algorithm
//! @see adaptiveThreshold
enum AdaptiveThresholdTypes {
    /** the threshold value \f$T(x,y)\f$ is a mean of the \f$\texttt{blockSize} \times
    \texttt{blockSize}\f$ neighborhood of \f$(x, y)\f$ minus C */
    ADAPTIVE_THRESH_MEAN_C     = 0,
    /** the threshold value \f$T(x, y)\f$ is a weighted sum (cross-correlation with a Gaussian
    window) of the \f$\texttt{blockSize} \times \texttt{blockSize}\f$ neighborhood of \f$(x, y)\f$
    minus C . The default sigma (standard deviation) is used for the specified blockSize . See
    #getGaussianKernel*/
    ADAPTIVE_THRESH_GAUSSIAN_C = 1
};

//! class of the pixel in GrabCut algorithm
enum GrabCutClasses {
    GC_BGD    = 0,  //!< an obvious background pixels
    GC_FGD    = 1,  //!< an obvious foreground (object) pixel
    GC_PR_BGD = 2,  //!< a possible background pixel
    GC_PR_FGD = 3   //!< a possible foreground pixel
};

//! GrabCut algorithm flags
enum GrabCutModes {
    /** The function initializes the state and the mask using the provided rectangle. After that it
    runs iterCount iterations of the algorithm. */
    GC_INIT_WITH_RECT  = 0,
    /** The function initializes the state using the provided mask. Note that GC_INIT_WITH_RECT
    and GC_INIT_WITH_MASK can be combined. Then, all the pixels outside of the ROI are
    automatically initialized with GC_BGD .*/
    GC_INIT_WITH_MASK  = 1,
    /** The value means that the algorithm should just resume. */
    GC_EVAL            = 2,
    /** The value means that the algorithm should just run the grabCut algorithm (a single iteration) with the fixed model */
    GC_EVAL_FREEZE_MODEL = 3
};

//! distanceTransform algorithm flags
enum DistanceTransformLabelTypes {
    /** each connected component of zeros in src (as well as all the non-zero pixels closest to the
    connected component) will be assigned the same label */
    DIST_LABEL_CCOMP = 0,
    /** each zero pixel (and all the non-zero pixels closest to it) gets its own label. */
    DIST_LABEL_PIXEL = 1
};

//! floodfill algorithm flags
enum FloodFillFlags {
    /** If set, the difference between the current pixel and seed pixel is considered. Otherwise,
    the difference between neighbor pixels is considered (that is, the range is floating). */
    FLOODFILL_FIXED_RANGE = 1 << 16,
    /** If set, the function does not change the image ( newVal is ignored), and only fills the
    mask with the value specified in bits 8-16 of flags as described above. This option only make
    sense in function variants that have the mask parameter. */
    FLOODFILL_MASK_ONLY   = 1 << 17
};

//! @} imgproc_misc

//! @addtogroup imgproc_shape
//! @{

//! connected components statistics
enum ConnectedComponentsTypes {
    CC_STAT_LEFT   = 0, //!< The leftmost (x) coordinate which is the inclusive start of the bounding
                        //!< box in the horizontal direction.
    CC_STAT_TOP    = 1, //!< The topmost (y) coordinate which is the inclusive start of the bounding
                        //!< box in the vertical direction.
    CC_STAT_WIDTH  = 2, //!< The horizontal size of the bounding box
    CC_STAT_HEIGHT = 3, //!< The vertical size of the bounding box
    CC_STAT_AREA   = 4, //!< The total area (in pixels) of the connected component
#ifndef CV_DOXYGEN
    CC_STAT_MAX    = 5 //!< Max enumeration value. Used internally only for memory allocation
#endif
};

//! connected components algorithm
enum ConnectedComponentsAlgorithmsTypes {
    CCL_WU      = 0,  //!< SAUF @cite Wu2009 algorithm for 8-way connectivity, SAUF algorithm for 4-way connectivity
    CCL_DEFAULT = -1, //!< BBDT algorithm for 8-way connectivity, SAUF algorithm for 4-way connectivity
    CCL_GRANA   = 1   //!< BBDT algorithm for 8-way connectivity, SAUF algorithm for 4-way connectivity
};

//! mode of the contour retrieval algorithm
enum RetrievalModes {
    /** retrieves only the extreme outer contours. It sets `hierarchy[i][2]=hierarchy[i][3]=-1` for
    all the contours. */
    RETR_EXTERNAL  = 0,
    /** retrieves all of the contours without establishing any hierarchical relationships. */
    RETR_LIST      = 1,
    /** retrieves all of the contours and organizes them into a two-level hierarchy. At the top
    level, there are external boundaries of the components. At the second level, there are
    boundaries of the holes. If there is another contour inside a hole of a connected component, it
    is still put at the top level. */
    RETR_CCOMP     = 2,
    /** retrieves all of the contours and reconstructs a full hierarchy of nested contours.*/
    RETR_TREE      = 3,
    RETR_FLOODFILL = 4 //!<
};

//! the contour approximation algorithm
enum ContourApproximationModes {
    /** stores absolutely all the contour points. That is, any 2 subsequent points (x1,y1) and
    (x2,y2) of the contour will be either horizontal, vertical or diagonal neighbors, that is,
    max(abs(x1-x2),abs(y2-y1))==1. */
    CHAIN_APPROX_NONE      = 1,
    /** compresses horizontal, vertical, and diagonal segments and leaves only their end points.
    For example, an up-right rectangular contour is encoded with 4 points. */
    CHAIN_APPROX_SIMPLE    = 2,
    /** applies one of the flavors of the Teh-Chin chain approximation algorithm @cite TehChin89 */
    CHAIN_APPROX_TC89_L1   = 3,
    /** applies one of the flavors of the Teh-Chin chain approximation algorithm @cite TehChin89 */
    CHAIN_APPROX_TC89_KCOS = 4
};

/** @brief Shape matching methods

\f$A\f$ denotes object1,\f$B\f$ denotes object2

\f$\begin{array}{l} m^A_i =  \mathrm{sign} (h^A_i)  \cdot \log{h^A_i} \\ m^B_i =  \mathrm{sign} (h^B_i)  \cdot \log{h^B_i} \end{array}\f$

and \f$h^A_i, h^B_i\f$ are the Hu moments of \f$A\f$ and \f$B\f$ , respectively.
*/
enum ShapeMatchModes {
    CONTOURS_MATCH_I1  =1, //!< \f[I_1(A,B) =  \sum _{i=1...7}  \left |  \frac{1}{m^A_i} -  \frac{1}{m^B_i} \right |\f]
    CONTOURS_MATCH_I2  =2, //!< \f[I_2(A,B) =  \sum _{i=1...7}  \left | m^A_i - m^B_i  \right |\f]
    CONTOURS_MATCH_I3  =3  //!< \f[I_3(A,B) =  \max _{i=1...7}  \frac{ \left| m^A_i - m^B_i \right| }{ \left| m^A_i \right| }\f]
};

//! @} imgproc_shape

//! @addtogroup imgproc_feature
//! @{

//! Variants of a Hough transform
enum HoughModes {

    /** classical or standard Hough transform. Every line is represented by two floating-point
    numbers \f$(\rho, \theta)\f$ , where \f$\rho\f$ is a distance between (0,0) point and the line,
    and \f$\theta\f$ is the angle between x-axis and the normal to the line. Thus, the matrix must
    be (the created sequence will be) of CV_32FC2 type */
    HOUGH_STANDARD      = 0,
    /** probabilistic Hough transform (more efficient in case if the picture contains a few long
    linear segments). It returns line segments rather than the whole line. Each segment is
    represented by starting and ending points, and the matrix must be (the created sequence will
    be) of the CV_32SC4 type. */
    HOUGH_PROBABILISTIC = 1,
    /** multi-scale variant of the classical Hough transform. The lines are encoded the same way as
    HOUGH_STANDARD. */
    HOUGH_MULTI_SCALE   = 2,
    HOUGH_GRADIENT      = 3, //!< basically *21HT*, described in @cite Yuen90
    HOUGH_GRADIENT_ALT  = 4, //!< variation of HOUGH_GRADIENT to get better accuracy
};

//! Variants of Line Segment %Detector
enum LineSegmentDetectorModes {
    LSD_REFINE_NONE = 0, //!< No refinement applied
    LSD_REFINE_STD  = 1, //!< Standard refinement is applied. E.g. breaking arches into smaller straighter line approximations.
    LSD_REFINE_ADV  = 2  //!< Advanced refinement. Number of false alarms is calculated, lines are
                         //!< refined through increase of precision, decrement in size, etc.
};

//! @} imgproc_feature

/** Histogram comparison methods
  @ingroup imgproc_hist
*/
enum HistCompMethods {
    /** Correlation
    \f[d(H_1,H_2) =  \frac{\sum_I (H_1(I) - \bar{H_1}) (H_2(I) - \bar{H_2})}{\sqrt{\sum_I(H_1(I) - \bar{H_1})^2 \sum_I(H_2(I) - \bar{H_2})^2}}\f]
    where
    \f[\bar{H_k} =  \frac{1}{N} \sum _J H_k(J)\f]
    and \f$N\f$ is a total number of histogram bins. */
    HISTCMP_CORREL        = 0,
    /** Chi-Square
    \f[d(H_1,H_2) =  \sum _I  \frac{\left(H_1(I)-H_2(I)\right)^2}{H_1(I)}\f] */
    HISTCMP_CHISQR        = 1,
    /** Intersection
    \f[d(H_1,H_2) =  \sum _I  \min (H_1(I), H_2(I))\f] */
    HISTCMP_INTERSECT     = 2,
    /** Bhattacharyya distance
    (In fact, OpenCV computes Hellinger distance, which is related to Bhattacharyya coefficient.)
    \f[d(H_1,H_2) =  \sqrt{1 - \frac{1}{\sqrt{\bar{H_1} \bar{H_2} N^2}} \sum_I \sqrt{H_1(I) \cdot H_2(I)}}\f] */
    HISTCMP_BHATTACHARYYA = 3,
    HISTCMP_HELLINGER     = HISTCMP_BHATTACHARYYA, //!< Synonym for HISTCMP_BHATTACHARYYA
    /** Alternative Chi-Square
    \f[d(H_1,H_2) =  2 * \sum _I  \frac{\left(H_1(I)-H_2(I)\right)^2}{H_1(I)+H_2(I)}\f]
    This alternative formula is regularly used for texture comparison. See e.g. @cite Puzicha1997 */
    HISTCMP_CHISQR_ALT    = 4,
    /** Kullback-Leibler divergence
    \f[d(H_1,H_2) = \sum _I H_1(I) \log \left(\frac{H_1(I)}{H_2(I)}\right)\f] */
    HISTCMP_KL_DIV        = 5
};

/** the color conversion codes
@see @ref imgproc_color_conversions
@ingroup imgproc_color_conversions
 */
enum ColorConversionCodes {
    COLOR_BGR2BGRA     = 0, //!< add alpha channel to RGB or BGR image
    COLOR_RGB2RGBA     = COLOR_BGR2BGRA,

    COLOR_BGRA2BGR     = 1, //!< remove alpha channel from RGB or BGR image
    COLOR_RGBA2RGB     = COLOR_BGRA2BGR,

    COLOR_BGR2RGBA     = 2, //!< convert between RGB and BGR color spaces (with or without alpha channel)
    COLOR_RGB2BGRA     = COLOR_BGR2RGBA,

    COLOR_RGBA2BGR     = 3,
    COLOR_BGRA2RGB     = COLOR_RGBA2BGR,

    COLOR_BGR2RGB      = 4,
    COLOR_RGB2BGR      = COLOR_BGR2RGB,

    COLOR_BGRA2RGBA    = 5,
    COLOR_RGBA2BGRA    = COLOR_BGRA2RGBA,

    COLOR_BGR2GRAY     = 6, //!< convert between RGB/BGR and grayscale, @ref color_convert_rgb_gray "color conversions"
    COLOR_RGB2GRAY     = 7,
    COLOR_GRAY2BGR     = 8,
    COLOR_GRAY2RGB     = COLOR_GRAY2BGR,
    COLOR_GRAY2BGRA    = 9,
    COLOR_GRAY2RGBA    = COLOR_GRAY2BGRA,
    COLOR_BGRA2GRAY    = 10,
    COLOR_RGBA2GRAY    = 11,

    COLOR_BGR2BGR565   = 12, //!< convert between RGB/BGR and BGR565 (16-bit images)
    COLOR_RGB2BGR565   = 13,
    COLOR_BGR5652BGR   = 14,
    COLOR_BGR5652RGB   = 15,
    COLOR_BGRA2BGR565  = 16,
    COLOR_RGBA2BGR565  = 17,
    COLOR_BGR5652BGRA  = 18,
    COLOR_BGR5652RGBA  = 19,

    COLOR_GRAY2BGR565  = 20, //!< convert between grayscale to BGR565 (16-bit images)
    COLOR_BGR5652GRAY  = 21,

    COLOR_BGR2BGR555   = 22,  //!< convert between RGB/BGR and BGR555 (16-bit images)
    COLOR_RGB2BGR555   = 23,
    COLOR_BGR5552BGR   = 24,
    COLOR_BGR5552RGB   = 25,
    COLOR_BGRA2BGR555  = 26,
    COLOR_RGBA2BGR555  = 27,
    COLOR_BGR5552BGRA  = 28,
    COLOR_BGR5552RGBA  = 29,

    COLOR_GRAY2BGR555  = 30, //!< convert between grayscale and BGR555 (16-bit images)
    COLOR_BGR5552GRAY  = 31,

    COLOR_BGR2XYZ      = 32, //!< convert RGB/BGR to CIE XYZ, @ref color_convert_rgb_xyz "color conversions"
    COLOR_RGB2XYZ      = 33,
    COLOR_XYZ2BGR      = 34,
    COLOR_XYZ2RGB      = 35,

    COLOR_BGR2YCrCb    = 36, //!< convert RGB/BGR to luma-chroma (aka YCC), @ref color_convert_rgb_ycrcb "color conversions"
    COLOR_RGB2YCrCb    = 37,
    COLOR_YCrCb2BGR    = 38,
    COLOR_YCrCb2RGB    = 39,

    COLOR_BGR2HSV      = 40, //!< convert RGB/BGR to HSV (hue saturation value) with H range 0..180 if 8 bit image, @ref color_convert_rgb_hsv "color conversions"
    COLOR_RGB2HSV      = 41,

    COLOR_BGR2Lab      = 44, //!< convert RGB/BGR to CIE Lab, @ref color_convert_rgb_lab "color conversions"
    COLOR_RGB2Lab      = 45,

    COLOR_BGR2Luv      = 50, //!< convert RGB/BGR to CIE Luv, @ref color_convert_rgb_luv "color conversions"
    COLOR_RGB2Luv      = 51,
    COLOR_BGR2HLS      = 52, //!< convert RGB/BGR to HLS (hue lightness saturation) with H range 0..180 if 8 bit image, @ref color_convert_rgb_hls "color conversions"
    COLOR_RGB2HLS      = 53,

    COLOR_HSV2BGR      = 54, //!< backward conversions HSV to RGB/BGR with H range 0..180 if 8 bit image
    COLOR_HSV2RGB      = 55,

    COLOR_Lab2BGR      = 56,
    COLOR_Lab2RGB      = 57,
    COLOR_Luv2BGR      = 58,
    COLOR_Luv2RGB      = 59,
    COLOR_HLS2BGR      = 60, //!< backward conversions HLS to RGB/BGR with H range 0..180 if 8 bit image
    COLOR_HLS2RGB      = 61,

    COLOR_BGR2HSV_FULL = 66, //!< convert RGB/BGR to HSV (hue saturation value) with H range 0..255 if 8 bit image, @ref color_convert_rgb_hsv "color conversions"
    COLOR_RGB2HSV_FULL = 67,
    COLOR_BGR2HLS_FULL = 68, //!< convert RGB/BGR to HLS (hue lightness saturation) with H range 0..255 if 8 bit image, @ref color_convert_rgb_hls "color conversions"
    COLOR_RGB2HLS_FULL = 69,

    COLOR_HSV2BGR_FULL = 70, //!< backward conversions HSV to RGB/BGR with H range 0..255 if 8 bit image
    COLOR_HSV2RGB_FULL = 71,
    COLOR_HLS2BGR_FULL = 72, //!< backward conversions HLS to RGB/BGR with H range 0..255 if 8 bit image
    COLOR_HLS2RGB_FULL = 73,

    COLOR_LBGR2Lab     = 74,
    COLOR_LRGB2Lab     = 75,
    COLOR_LBGR2Luv     = 76,
    COLOR_LRGB2Luv     = 77,

    COLOR_Lab2LBGR     = 78,
    COLOR_Lab2LRGB     = 79,
    COLOR_Luv2LBGR     = 80,
    COLOR_Luv2LRGB     = 81,

    COLOR_BGR2YUV      = 82, //!< convert between RGB/BGR and YUV
    COLOR_RGB2YUV      = 83,
    COLOR_YUV2BGR      = 84,
    COLOR_YUV2RGB      = 85,

    //! YUV 4:2:0 family to RGB
    COLOR_YUV2RGB_NV12  = 90,
    COLOR_YUV2BGR_NV12  = 91,
    COLOR_YUV2RGB_NV21  = 92,
    COLOR_YUV2BGR_NV21  = 93,
    COLOR_YUV420sp2RGB  = COLOR_YUV2RGB_NV21,
    COLOR_YUV420sp2BGR  = COLOR_YUV2BGR_NV21,

    COLOR_YUV2RGBA_NV12 = 94,
    COLOR_YUV2BGRA_NV12 = 95,
    COLOR_YUV2RGBA_NV21 = 96,
    COLOR_YUV2BGRA_NV21 = 97,
    COLOR_YUV420sp2RGBA = COLOR_YUV2RGBA_NV21,
    COLOR_YUV420sp2BGRA = COLOR_YUV2BGRA_NV21,

    COLOR_YUV2RGB_YV12  = 98,
    COLOR_YUV2BGR_YV12  = 99,
    COLOR_YUV2RGB_IYUV  = 100,
    COLOR_YUV2BGR_IYUV  = 101,
    COLOR_YUV2RGB_I420  = COLOR_YUV2RGB_IYUV,
    COLOR_YUV2BGR_I420  = COLOR_YUV2BGR_IYUV,
    COLOR_YUV420p2RGB   = COLOR_YUV2RGB_YV12,
    COLOR_YUV420p2BGR   = COLOR_YUV2BGR_YV12,

    COLOR_YUV2RGBA_YV12 = 102,
    COLOR_YUV2BGRA_YV12 = 103,
    COLOR_YUV2RGBA_IYUV = 104,
    COLOR_YUV2BGRA_IYUV = 105,
    COLOR_YUV2RGBA_I420 = COLOR_YUV2RGBA_IYUV,
    COLOR_YUV2BGRA_I420 = COLOR_YUV2BGRA_IYUV,
    COLOR_YUV420p2RGBA  = COLOR_YUV2RGBA_YV12,
    COLOR_YUV420p2BGRA  = COLOR_YUV2BGRA_YV12,

    COLOR_YUV2GRAY_420  = 106,
    COLOR_YUV2GRAY_NV21 = COLOR_YUV2GRAY_420,
    COLOR_YUV2GRAY_NV12 = COLOR_YUV2GRAY_420,
    COLOR_YUV2GRAY_YV12 = COLOR_YUV2GRAY_420,
    COLOR_YUV2GRAY_IYUV = COLOR_YUV2GRAY_420,
    COLOR_YUV2GRAY_I420 = COLOR_YUV2GRAY_420,
    COLOR_YUV420sp2GRAY = COLOR_YUV2GRAY_420,
    COLOR_YUV420p2GRAY  = COLOR_YUV2GRAY_420,

    //! YUV 4:2:2 family to RGB
    COLOR_YUV2RGB_UYVY = 107,
    COLOR_YUV2BGR_UYVY = 108,
    //COLOR_YUV2RGB_VYUY = 109,
    //COLOR_YUV2BGR_VYUY = 110,
    COLOR_YUV2RGB_Y422 = COLOR_YUV2RGB_UYVY,
    COLOR_YUV2BGR_Y422 = COLOR_YUV2BGR_UYVY,
    COLOR_YUV2RGB_UYNV = COLOR_YUV2RGB_UYVY,
    COLOR_YUV2BGR_UYNV = COLOR_YUV2BGR_UYVY,

    COLOR_YUV2RGBA_UYVY = 111,
    COLOR_YUV2BGRA_UYVY = 112,
    //COLOR_YUV2RGBA_VYUY = 113,
    //COLOR_YUV2BGRA_VYUY = 114,
    COLOR_YUV2RGBA_Y422 = COLOR_YUV2RGBA_UYVY,
    COLOR_YUV2BGRA_Y422 = COLOR_YUV2BGRA_UYVY,
    COLOR_YUV2RGBA_UYNV = COLOR_YUV2RGBA_UYVY,
    COLOR_YUV2BGRA_UYNV = COLOR_YUV2BGRA_UYVY,

    COLOR_YUV2RGB_YUY2 = 115,
    COLOR_YUV2BGR_YUY2 = 116,
    COLOR_YUV2RGB_YVYU = 117,
    COLOR_YUV2BGR_YVYU = 118,
    COLOR_YUV2RGB_YUYV = COLOR_YUV2RGB_YUY2,
    COLOR_YUV2BGR_YUYV = COLOR_YUV2BGR_YUY2,
    COLOR_YUV2RGB_YUNV = COLOR_YUV2RGB_YUY2,
    COLOR_YUV2BGR_YUNV = COLOR_YUV2BGR_YUY2,

    COLOR_YUV2RGBA_YUY2 = 119,
    COLOR_YUV2BGRA_YUY2 = 120,
    COLOR_YUV2RGBA_YVYU = 121,
    COLOR_YUV2BGRA_YVYU = 122,
    COLOR_YUV2RGBA_YUYV = COLOR_YUV2RGBA_YUY2,
    COLOR_YUV2BGRA_YUYV = COLOR_YUV2BGRA_YUY2,
    COLOR_YUV2RGBA_YUNV = COLOR_YUV2RGBA_YUY2,
    COLOR_YUV2BGRA_YUNV = COLOR_YUV2BGRA_YUY2,

    COLOR_YUV2GRAY_UYVY = 123,
    COLOR_YUV2GRAY_YUY2 = 124,
    //CV_YUV2GRAY_VYUY    = CV_YUV2GRAY_UYVY,
    COLOR_YUV2GRAY_Y422 = COLOR_YUV2GRAY_UYVY,
    COLOR_YUV2GRAY_UYNV = COLOR_YUV2GRAY_UYVY,
    COLOR_YUV2GRAY_YVYU = COLOR_YUV2GRAY_YUY2,
    COLOR_YUV2GRAY_YUYV = COLOR_YUV2GRAY_YUY2,
    COLOR_YUV2GRAY_YUNV = COLOR_YUV2GRAY_YUY2,

    //! alpha premultiplication
    COLOR_RGBA2mRGBA    = 125,
    COLOR_mRGBA2RGBA    = 126,

    //! RGB to YUV 4:2:0 family
    COLOR_RGB2YUV_I420  = 127,
    COLOR_BGR2YUV_I420  = 128,
    COLOR_RGB2YUV_IYUV  = COLOR_RGB2YUV_I420,
    COLOR_BGR2YUV_IYUV  = COLOR_BGR2YUV_I420,

    COLOR_RGBA2YUV_I420 = 129,
    COLOR_BGRA2YUV_I420 = 130,
    COLOR_RGBA2YUV_IYUV = COLOR_RGBA2YUV_I420,
    COLOR_BGRA2YUV_IYUV = COLOR_BGRA2YUV_I420,
    COLOR_RGB2YUV_YV12  = 131,
    COLOR_BGR2YUV_YV12  = 132,
    COLOR_RGBA2YUV_YV12 = 133,
    COLOR_BGRA2YUV_YV12 = 134,

    //! Demosaicing
    COLOR_BayerBG2BGR = 46,
    COLOR_BayerGB2BGR = 47,
    COLOR_BayerRG2BGR = 48,
    COLOR_BayerGR2BGR = 49,

    COLOR_BayerBG2RGB = COLOR_BayerRG2BGR,
    COLOR_BayerGB2RGB = COLOR_BayerGR2BGR,
    COLOR_BayerRG2RGB = COLOR_BayerBG2BGR,
    COLOR_BayerGR2RGB = COLOR_BayerGB2BGR,

    COLOR_BayerBG2GRAY = 86,
    COLOR_BayerGB2GRAY = 87,
    COLOR_BayerRG2GRAY = 88,
    COLOR_BayerGR2GRAY = 89,

    //! Demosaicing using Variable Number of Gradients
    COLOR_BayerBG2BGR_VNG = 62,
    COLOR_BayerGB2BGR_VNG = 63,
    COLOR_BayerRG2BGR_VNG = 64,
    COLOR_BayerGR2BGR_VNG = 65,

    COLOR_BayerBG2RGB_VNG = COLOR_BayerRG2BGR_VNG,
    COLOR_BayerGB2RGB_VNG = COLOR_BayerGR2BGR_VNG,
    COLOR_BayerRG2RGB_VNG = COLOR_BayerBG2BGR_VNG,
    COLOR_BayerGR2RGB_VNG = COLOR_BayerGB2BGR_VNG,

    //! Edge-Aware Demosaicing
    COLOR_BayerBG2BGR_EA  = 135,
    COLOR_BayerGB2BGR_EA  = 136,
    COLOR_BayerRG2BGR_EA  = 137,
    COLOR_BayerGR2BGR_EA  = 138,

    COLOR_BayerBG2RGB_EA  = COLOR_BayerRG2BGR_EA,
    COLOR_BayerGB2RGB_EA  = COLOR_BayerGR2BGR_EA,
    COLOR_BayerRG2RGB_EA  = COLOR_BayerBG2BGR_EA,
    COLOR_BayerGR2RGB_EA  = COLOR_BayerGB2BGR_EA,

    //! Demosaicing with alpha channel
    COLOR_BayerBG2BGRA = 139,
    COLOR_BayerGB2BGRA = 140,
    COLOR_BayerRG2BGRA = 141,
    COLOR_BayerGR2BGRA = 142,

    COLOR_BayerBG2RGBA = COLOR_BayerRG2BGRA,
    COLOR_BayerGB2RGBA = COLOR_BayerGR2BGRA,
    COLOR_BayerRG2RGBA = COLOR_BayerBG2BGRA,
    COLOR_BayerGR2RGBA = COLOR_BayerGB2BGRA,

    COLOR_COLORCVT_MAX  = 143
};

//! @addtogroup imgproc_shape
//! @{

//! types of intersection between rectangles
enum RectanglesIntersectTypes {
    INTERSECT_NONE = 0, //!< No intersection
    INTERSECT_PARTIAL  = 1, //!< There is a partial intersection
    INTERSECT_FULL  = 2 //!< One of the rectangle is fully enclosed in the other
};

/** types of line
@ingroup imgproc_draw
*/
enum LineTypes {
    FILLED  = -1,
    LINE_4  = 4, //!< 4-connected line
    LINE_8  = 8, //!< 8-connected line
    LINE_AA = 16 //!< antialiased line
};

/** Only a subset of Hershey fonts <https://en.wikipedia.org/wiki/Hershey_fonts> are supported
@ingroup imgproc_draw
*/
enum HersheyFonts {
    FONT_HERSHEY_SIMPLEX        = 0, //!< normal size sans-serif font
    FONT_HERSHEY_PLAIN          = 1, //!< small size sans-serif font
    FONT_HERSHEY_DUPLEX         = 2, //!< normal size sans-serif font (more complex than FONT_HERSHEY_SIMPLEX)
    FONT_HERSHEY_COMPLEX        = 3, //!< normal size serif font
    FONT_HERSHEY_TRIPLEX        = 4, //!< normal size serif font (more complex than FONT_HERSHEY_COMPLEX)
    FONT_HERSHEY_COMPLEX_SMALL  = 5, //!< smaller version of FONT_HERSHEY_COMPLEX
    FONT_HERSHEY_SCRIPT_SIMPLEX = 6, //!< hand-writing style font
    FONT_HERSHEY_SCRIPT_COMPLEX = 7, //!< more complex variant of FONT_HERSHEY_SCRIPT_SIMPLEX
    FONT_ITALIC                 = 16 //!< flag for italic font
};

/** Possible set of marker types used for the cv::drawMarker function
@ingroup imgproc_draw
*/
enum MarkerTypes
{
    MARKER_CROSS = 0,           //!< A crosshair marker shape
    MARKER_TILTED_CROSS = 1,    //!< A 45 degree tilted crosshair marker shape
    MARKER_STAR = 2,            //!< A star marker shape, combination of cross and tilted cross
    MARKER_DIAMOND = 3,         //!< A diamond marker shape
    MARKER_SQUARE = 4,          //!< A square marker shape
    MARKER_TRIANGLE_UP = 5,     //!< An upwards pointing triangle marker shape
    MARKER_TRIANGLE_DOWN = 6    //!< A downwards pointing triangle marker shape
};

/** @brief finds arbitrary template in the grayscale image using Generalized Hough Transform
*/
class CV_EXPORTS_W GeneralizedHough : public Algorithm
{
public:
    //! set template to search
    CV_WRAP virtual void setTemplate(InputArray templ, Point templCenter = Point(-1, -1)) = 0;
    CV_WRAP virtual void setTemplate(InputArray edges, InputArray dx, InputArray dy, Point templCenter = Point(-1, -1)) = 0;

    //! find template on image
    CV_WRAP virtual void detect(InputArray image, OutputArray positions, OutputArray votes = noArray()) = 0;
    CV_WRAP virtual void detect(InputArray edges, InputArray dx, InputArray dy, OutputArray positions, OutputArray votes = noArray()) = 0;

    //! Canny low threshold.
    CV_WRAP virtual void setCannyLowThresh(int cannyLowThresh) = 0;
    CV_WRAP virtual int getCannyLowThresh() const = 0;

    //! Canny high threshold.
    CV_WRAP virtual void setCannyHighThresh(int cannyHighThresh) = 0;
    CV_WRAP virtual int getCannyHighThresh() const = 0;

    //! Minimum distance between the centers of the detected objects.
    CV_WRAP virtual void setMinDist(double minDist) = 0;
    CV_WRAP virtual double getMinDist() const = 0;

    //! Inverse ratio of the accumulator resolution to the image resolution.
    CV_WRAP virtual void setDp(double dp) = 0;
    CV_WRAP virtual double getDp() const = 0;

    //! Maximal size of inner buffers.
    CV_WRAP virtual void setMaxBufferSize(int maxBufferSize) = 0;
    CV_WRAP virtual int getMaxBufferSize() const = 0;
};

/** @brief finds arbitrary template in the grayscale image using Generalized Hough Transform

Detects position only without translation and rotation @cite Ballard1981 .
*/
class CV_EXPORTS_W GeneralizedHoughBallard : public GeneralizedHough
{
public:
    //! R-Table levels.
    CV_WRAP virtual void setLevels(int levels) = 0;
    CV_WRAP virtual int getLevels() const = 0;

    //! The accumulator threshold for the template centers at the detection stage. The smaller it is, the more false positions may be detected.
    CV_WRAP virtual void setVotesThreshold(int votesThreshold) = 0;
    CV_WRAP virtual int getVotesThreshold() const = 0;
};

/** @brief finds arbitrary template in the grayscale image using Generalized Hough Transform

Detects position, translation and rotation @cite Guil1999 .
*/
class CV_EXPORTS_W GeneralizedHoughGuil : public GeneralizedHough
{
public:
    //! Angle difference in degrees between two points in feature.
    CV_WRAP virtual void setXi(double xi) = 0;
    CV_WRAP virtual double getXi() const = 0;

    //! Feature table levels.
    CV_WRAP virtual void setLevels(int levels) = 0;
    CV_WRAP virtual int getLevels() const = 0;

    //! Maximal difference between angles that treated as equal.
    CV_WRAP virtual void setAngleEpsilon(double angleEpsilon) = 0;
    CV_WRAP virtual double getAngleEpsilon() const = 0;

    //! Minimal rotation angle to detect in degrees.
    CV_WRAP virtual void setMinAngle(double minAngle) = 0;
    CV_WRAP virtual double getMinAngle() const = 0;

    //! Maximal rotation angle to detect in degrees.
    CV_WRAP virtual void setMaxAngle(double maxAngle) = 0;
    CV_WRAP virtual double getMaxAngle() const = 0;

    //! Angle step in degrees.
    CV_WRAP virtual void setAngleStep(double angleStep) = 0;
    CV_WRAP virtual double getAngleStep() const = 0;

    //! Angle votes threshold.
    CV_WRAP virtual void setAngleThresh(int angleThresh) = 0;
    CV_WRAP virtual int getAngleThresh() const = 0;

    //! Minimal scale to detect.
    CV_WRAP virtual void setMinScale(double minScale) = 0;
    CV_WRAP virtual double getMinScale() const = 0;

    //! Maximal scale to detect.
    CV_WRAP virtual void setMaxScale(double maxScale) = 0;
    CV_WRAP virtual double getMaxScale() const = 0;

    //! Scale step.
    CV_WRAP virtual void setScaleStep(double scaleStep) = 0;
    CV_WRAP virtual double getScaleStep() const = 0;

    //! Scale votes threshold.
    CV_WRAP virtual void setScaleThresh(int scaleThresh) = 0;
    CV_WRAP virtual int getScaleThresh() const = 0;

    //! Position votes threshold.
    CV_WRAP virtual void setPosThresh(int posThresh) = 0;
    CV_WRAP virtual int getPosThresh() const = 0;
};

//! @} imgproc_shape

//! @addtogroup imgproc_hist
//! @{

/** @brief Base class for Contrast Limited Adaptive Histogram Equalization.
*/
class CV_EXPORTS_W CLAHE : public Algorithm
{
public:
    /** @brief Equalizes the histogram of a grayscale image using Contrast Limited Adaptive Histogram Equalization.

    @param src Source image of type CV_8UC1 or CV_16UC1.
    @param dst Destination image.
     */
    CV_WRAP virtual void apply(InputArray src, OutputArray dst) = 0;

    /** @brief Sets threshold for contrast limiting.

    @param clipLimit threshold value.
    */
    CV_WRAP virtual void setClipLimit(double clipLimit) = 0;

    //! Returns threshold value for contrast limiting.
    CV_WRAP virtual double getClipLimit() const = 0;

    /** @brief Sets size of grid for histogram equalization. Input image will be divided into
    equally sized rectangular tiles.

    @param tileGridSize defines the number of tiles in row and column.
    */
    CV_WRAP virtual void setTilesGridSize(Size tileGridSize) = 0;

    //!@brief Returns Size defines the number of tiles in row and column.
    CV_WRAP virtual Size getTilesGridSize() const = 0;

    CV_WRAP virtual void collectGarbage() = 0;
};

//! @} imgproc_hist

//! @addtogroup imgproc_subdiv2d
//! @{

class CV_EXPORTS_W Subdiv2D
{
public:
    /** Subdiv2D point location cases */
    enum { PTLOC_ERROR        = -2, //!< Point location error
           PTLOC_OUTSIDE_RECT = -1, //!< Point outside the subdivision bounding rect
           PTLOC_INSIDE       = 0, //!< Point inside some facet
           PTLOC_VERTEX       = 1, //!< Point coincides with one of the subdivision vertices
           PTLOC_ON_EDGE      = 2  //!< Point on some edge
         };

    /** Subdiv2D edge type navigation (see: getEdge()) */
    enum { NEXT_AROUND_ORG   = 0x00,
           NEXT_AROUND_DST   = 0x22,
           PREV_AROUND_ORG   = 0x11,
           PREV_AROUND_DST   = 0x33,
           NEXT_AROUND_LEFT  = 0x13,
           NEXT_AROUND_RIGHT = 0x31,
           PREV_AROUND_LEFT  = 0x20,
           PREV_AROUND_RIGHT = 0x02
         };

    /** creates an empty Subdiv2D object.
    To create a new empty Delaunay subdivision you need to use the #initDelaunay function.
     */
    CV_WRAP Subdiv2D();

    /** @overload

    @param rect Rectangle that includes all of the 2D points that are to be added to the subdivision.

    The function creates an empty Delaunay subdivision where 2D points can be added using the function
    insert() . All of the points to be added must be within the specified rectangle, otherwise a runtime
    error is raised.
     */
    CV_WRAP Subdiv2D(Rect rect);

    /** @brief Creates a new empty Delaunay subdivision

    @param rect Rectangle that includes all of the 2D points that are to be added to the subdivision.

     */
    CV_WRAP void initDelaunay(Rect rect);

    /** @brief Insert a single point into a Delaunay triangulation.

    @param pt Point to insert.

    The function inserts a single point into a subdivision and modifies the subdivision topology
    appropriately. If a point with the same coordinates exists already, no new point is added.
    @returns the ID of the point.

    @note If the point is outside of the triangulation specified rect a runtime error is raised.
     */
    CV_WRAP int insert(Point2f pt);

    /** @brief Insert multiple points into a Delaunay triangulation.

    @param ptvec Points to insert.

    The function inserts a vector of points into a subdivision and modifies the subdivision topology
    appropriately.
     */
    CV_WRAP void insert(const std::vector<Point2f>& ptvec);

    /** @brief Returns the location of a point within a Delaunay triangulation.

    @param pt Point to locate.
    @param edge Output edge that the point belongs to or is located to the right of it.
    @param vertex Optional output vertex the input point coincides with.

    The function locates the input point within the subdivision and gives one of the triangle edges
    or vertices.

    @returns an integer which specify one of the following five cases for point location:
    -  The point falls into some facet. The function returns #PTLOC_INSIDE and edge will contain one of
       edges of the facet.
    -  The point falls onto the edge. The function returns #PTLOC_ON_EDGE and edge will contain this edge.
    -  The point coincides with one of the subdivision vertices. The function returns #PTLOC_VERTEX and
       vertex will contain a pointer to the vertex.
    -  The point is outside the subdivision reference rectangle. The function returns #PTLOC_OUTSIDE_RECT
       and no pointers are filled.
    -  One of input arguments is invalid. A runtime error is raised or, if silent or "parent" error
       processing mode is selected, #PTLOC_ERROR is returned.
     */
    CV_WRAP int locate(Point2f pt, CV_OUT int& edge, CV_OUT int& vertex);

    /** @brief Finds the subdivision vertex closest to the given point.

    @param pt Input point.
    @param nearestPt Output subdivision vertex point.

    The function is another function that locates the input point within the subdivision. It finds the
    subdivision vertex that is the closest to the input point. It is not necessarily one of vertices
    of the facet containing the input point, though the facet (located using locate() ) is used as a
    starting point.

    @returns vertex ID.
     */
    CV_WRAP int findNearest(Point2f pt, CV_OUT Point2f* nearestPt = 0);

    /** @brief Returns a list of all edges.

    @param edgeList Output vector.

    The function gives each edge as a 4 numbers vector, where each two are one of the edge
    vertices. i.e. org_x = v[0], org_y = v[1], dst_x = v[2], dst_y = v[3].
     */
    CV_WRAP void getEdgeList(CV_OUT std::vector<Vec4f>& edgeList) const;

    /** @brief Returns a list of the leading edge ID connected to each triangle.

    @param leadingEdgeList Output vector.

    The function gives one edge ID for each triangle.
     */
    CV_WRAP void getLeadingEdgeList(CV_OUT std::vector<int>& leadingEdgeList) const;

    /** @brief Returns a list of all triangles.

    @param triangleList Output vector.

    The function gives each triangle as a 6 numbers vector, where each two are one of the triangle
    vertices. i.e. p1_x = v[0], p1_y = v[1], p2_x = v[2], p2_y = v[3], p3_x = v[4], p3_y = v[5].
     */
    CV_WRAP void getTriangleList(CV_OUT std::vector<Vec6f>& triangleList) const;

    /** @brief Returns a list of all Voronoi facets.

    @param idx Vector of vertices IDs to consider. For all vertices you can pass empty vector.
    @param facetList Output vector of the Voronoi facets.
    @param facetCenters Output vector of the Voronoi facets center points.

     */
    CV_WRAP void getVoronoiFacetList(const std::vector<int>& idx, CV_OUT std::vector<std::vector<Point2f> >& facetList,
                                     CV_OUT std::vector<Point2f>& facetCenters);

    /** @brief Returns vertex location from vertex ID.

    @param vertex vertex ID.
    @param firstEdge Optional. The first edge ID which is connected to the vertex.
    @returns vertex (x,y)

     */
    CV_WRAP Point2f getVertex(int vertex, CV_OUT int* firstEdge = 0) const;

    /** @brief Returns one of the edges related to the given edge.

    @param edge Subdivision edge ID.
    @param nextEdgeType Parameter specifying which of the related edges to return.
    The following values are possible:
    -   NEXT_AROUND_ORG next around the edge origin ( eOnext on the picture below if e is the input edge)
    -   NEXT_AROUND_DST next around the edge vertex ( eDnext )
    -   PREV_AROUND_ORG previous around the edge origin (reversed eRnext )
    -   PREV_AROUND_DST previous around the edge destination (reversed eLnext )
    -   NEXT_AROUND_LEFT next around the left facet ( eLnext )
    -   NEXT_AROUND_RIGHT next around the right facet ( eRnext )
    -   PREV_AROUND_LEFT previous around the left facet (reversed eOnext )
    -   PREV_AROUND_RIGHT previous around the right facet (reversed eDnext )

    ![sample output](pics/quadedge.png)

    @returns edge ID related to the input edge.
     */
    CV_WRAP int getEdge( int edge, int nextEdgeType ) const;

    /** @brief Returns next edge around the edge origin.

    @param edge Subdivision edge ID.

    @returns an integer which is next edge ID around the edge origin: eOnext on the
    picture above if e is the input edge).
     */
    CV_WRAP int nextEdge(int edge) const;

    /** @brief Returns another edge of the same quad-edge.

    @param edge Subdivision edge ID.
    @param rotate Parameter specifying which of the edges of the same quad-edge as the input
    one to return. The following values are possible:
    -   0 - the input edge ( e on the picture below if e is the input edge)
    -   1 - the rotated edge ( eRot )
    -   2 - the reversed edge (reversed e (in green))
    -   3 - the reversed rotated edge (reversed eRot (in green))

    @returns one of the edges ID of the same quad-edge as the input edge.
     */
    CV_WRAP int rotateEdge(int edge, int rotate) const;
    CV_WRAP int symEdge(int edge) const;

    /** @brief Returns the edge origin.

    @param edge Subdivision edge ID.
    @param orgpt Output vertex location.

    @returns vertex ID.
     */
    CV_WRAP int edgeOrg(int edge, CV_OUT Point2f* orgpt = 0) const;

    /** @brief Returns the edge destination.

    @param edge Subdivision edge ID.
    @param dstpt Output vertex location.

    @returns vertex ID.
     */
    CV_WRAP int edgeDst(int edge, CV_OUT Point2f* dstpt = 0) const;

protected:
    int newEdge();
    void deleteEdge(int edge);
    int newPoint(Point2f pt, bool isvirtual, int firstEdge = 0);
    void deletePoint(int vtx);
    void setEdgePoints( int edge, int orgPt, int dstPt );
    void splice( int edgeA, int edgeB );
    int connectEdges( int edgeA, int edgeB );
    void swapEdges( int edge );
    int isRightOf(Point2f pt, int edge) const;
    void calcVoronoi();
    void clearVoronoi();
    void checkSubdiv() const;

    struct CV_EXPORTS Vertex
    {
        Vertex();
        Vertex(Point2f pt, bool _isvirtual, int _firstEdge=0);
        bool isvirtual() const;
        bool isfree() const;

        int firstEdge;
        int type;
        Point2f pt;
    };

    struct CV_EXPORTS QuadEdge
    {
        QuadEdge();
        QuadEdge(int edgeidx);
        bool isfree() const;

        int next[4];
        int pt[4];
    };

    //! All of the vertices
    std::vector<Vertex> vtx;
    //! All of the edges
    std::vector<QuadEdge> qedges;
    int freeQEdge;
    int freePoint;
    bool validGeometry;

    int recentEdge;
    //! Top left corner of the bounding rect
    Point2f topLeft;
    //! Bottom right corner of the bounding rect
    Point2f bottomRight;
};

//! @} imgproc_subdiv2d

//! @addtogroup imgproc_feature
//! @{

/** @brief Line segment detector class

following the algorithm described at @cite Rafael12 .

@note Implementation has been removed due original code license conflict

*/
class CV_EXPORTS_W LineSegmentDetector : public Algorithm
{
public:

    /** @brief Finds lines in the input image.

    This is the output of the default parameters of the algorithm on the above shown image.

    ![image](pics/building_lsd.png)

    @param _image A grayscale (CV_8UC1) input image. If only a roi needs to be selected, use:
    `lsd_ptr-\>detect(image(roi), lines, ...); lines += Scalar(roi.x, roi.y, roi.x, roi.y);`
    @param _lines A vector of Vec4i or Vec4f elements specifying the beginning and ending point of a line. Where
    Vec4i/Vec4f is (x1, y1, x2, y2), point 1 is the start, point 2 - end. Returned lines are strictly
    oriented depending on the gradient.
    @param width Vector of widths of the regions, where the lines are found. E.g. Width of line.
    @param prec Vector of precisions with which the lines are found.
    @param nfa Vector containing number of false alarms in the line region, with precision of 10%. The
    bigger the value, logarithmically better the detection.
    - -1 corresponds to 10 mean false alarms
    - 0 corresponds to 1 mean false alarm
    - 1 corresponds to 0.1 mean false alarms
    This vector will be calculated only when the objects type is #LSD_REFINE_ADV.
    */
    CV_WRAP virtual void detect(InputArray _image, OutputArray _lines,
                        OutputArray width = noArray(), OutputArray prec = noArray(),
                        OutputArray nfa = noArray()) = 0;

    /** @brief Draws the line segments on a given image.
    @param _image The image, where the lines will be drawn. Should be bigger or equal to the image,
    where the lines were found.
    @param lines A vector of the lines that needed to be drawn.
     */
    CV_WRAP virtual void drawSegments(InputOutputArray _image, InputArray lines) = 0;

    /** @brief Draws two groups of lines in blue and red, counting the non overlapping (mismatching) pixels.

    @param size The size of the image, where lines1 and lines2 were found.
    @param lines1 The first group of lines that needs to be drawn. It is visualized in blue color.
    @param lines2 The second group of lines. They visualized in red color.
    @param _image Optional image, where the lines will be drawn. The image should be color(3-channel)
    in order for lines1 and lines2 to be drawn in the above mentioned colors.
     */
    CV_WRAP virtual int compareSegments(const Size& size, InputArray lines1, InputArray lines2, InputOutputArray _image = noArray()) = 0;

    virtual ~LineSegmentDetector() { }
};

/** @brief Creates a smart pointer to a LineSegmentDetector object and initializes it.

The LineSegmentDetector algorithm is defined using the standard values. Only advanced users may want
to edit those, as to tailor it for their own application.

@param _refine The way found lines will be refined, see #LineSegmentDetectorModes
@param _scale The scale of the image that will be used to find the lines. Range (0..1].
@param _sigma_scale Sigma for Gaussian filter. It is computed as sigma = _sigma_scale/_scale.
@param _quant Bound to the quantization error on the gradient norm.
@param _ang_th Gradient angle tolerance in degrees.
@param _log_eps Detection threshold: -log10(NFA) \> log_eps. Used only when advance refinement
is chosen.
@param _density_th Minimal density of aligned region points in the enclosing rectangle.
@param _n_bins Number of bins in pseudo-ordering of gradient modulus.

@note Implementation has been removed due original code license conflict
 */
CV_EXPORTS_W Ptr<LineSegmentDetector> createLineSegmentDetector(
    int _refine = LSD_REFINE_STD, double _scale = 0.8,
    double _sigma_scale = 0.6, double _quant = 2.0, double _ang_th = 22.5,
    double _log_eps = 0, double _density_th = 0.7, int _n_bins = 1024);

//! @} imgproc_feature

//! @addtogroup imgproc_filter
//! @{

/** @brief Returns Gaussian filter coefficients.

The function computes and returns the \f$\texttt{ksize} \times 1\f$ matrix of Gaussian filter
coefficients:

\f[G_i= \alpha *e^{-(i-( \texttt{ksize} -1)/2)^2/(2* \texttt{sigma}^2)},\f]

where \f$i=0..\texttt{ksize}-1\f$ and \f$\alpha\f$ is the scale factor chosen so that \f$\sum_i G_i=1\f$.

Two of such generated kernels can be passed to sepFilter2D. Those functions automatically recognize
smoothing kernels (a symmetrical kernel with sum of weights equal to 1) and handle them accordingly.
You may also use the higher-level GaussianBlur.
@param ksize Aperture size. It should be odd ( \f$\texttt{ksize} \mod 2 = 1\f$ ) and positive.
@param sigma Gaussian standard deviation. If it is non-positive, it is computed from ksize as
`sigma = 0.3*((ksize-1)*0.5 - 1) + 0.8`.
@param ktype Type of filter coefficients. It can be CV_32F or CV_64F .
@sa  sepFilter2D, getDerivKernels, getStructuringElement, GaussianBlur
 */
CV_EXPORTS_W Mat getGaussianKernel( int ksize, double sigma, int ktype = CV_64F );

/** @brief Returns filter coefficients for computing spatial image derivatives.

The function computes and returns the filter coefficients for spatial image derivatives. When
`ksize=FILTER_SCHARR`, the Scharr \f$3 \times 3\f$ kernels are generated (see #Scharr). Otherwise, Sobel
kernels are generated (see #Sobel). The filters are normally passed to #sepFilter2D or to

@param kx Output matrix of row filter coefficients. It has the type ktype .
@param ky Output matrix of column filter coefficients. It has the type ktype .
@param dx Derivative order in respect of x.
@param dy Derivative order in respect of y.
@param ksize Aperture size. It can be FILTER_SCHARR, 1, 3, 5, or 7.
@param normalize Flag indicating whether to normalize (scale down) the filter coefficients or not.
Theoretically, the coefficients should have the denominator \f$=2^{ksize*2-dx-dy-2}\f$. If you are
going to filter floating-point images, you are likely to use the normalized kernels. But if you
compute derivatives of an 8-bit image, store the results in a 16-bit image, and wish to preserve
all the fractional bits, you may want to set normalize=false .
@param ktype Type of filter coefficients. It can be CV_32f or CV_64F .
 */
CV_EXPORTS_W void getDerivKernels( OutputArray kx, OutputArray ky,
                                   int dx, int dy, int ksize,
                                   bool normalize = false, int ktype = CV_32F );

/** @brief Returns Gabor filter coefficients.

For more details about gabor filter equations and parameters, see: [Gabor
Filter](http://en.wikipedia.org/wiki/Gabor_filter).

@param ksize Size of the filter returned.
@param sigma Standard deviation of the gaussian envelope.
@param theta Orientation of the normal to the parallel stripes of a Gabor function.
@param lambd Wavelength of the sinusoidal factor.
@param gamma Spatial aspect ratio.
@param psi Phase offset.
@param ktype Type of filter coefficients. It can be CV_32F or CV_64F .
 */
CV_EXPORTS_W Mat getGaborKernel( Size ksize, double sigma, double theta, double lambd,
                                 double gamma, double psi = CV_PI*0.5, int ktype = CV_64F );

//! returns "magic" border value for erosion and dilation. It is automatically transformed to Scalar::all(-DBL_MAX) for dilation.
static inline Scalar morphologyDefaultBorderValue() { return Scalar::all(DBL_MAX); }

/** @brief Returns a structuring element of the specified size and shape for morphological operations.

The function constructs and returns the structuring element that can be further passed to #erode,
#dilate or #morphologyEx. But you can also construct an arbitrary binary mask yourself and use it as
the structuring element.

@param shape Element shape that could be one of #MorphShapes
@param ksize Size of the structuring element.
@param anchor Anchor position within the element. The default value \f$(-1, -1)\f$ means that the
anchor is at the center. Note that only the shape of a cross-shaped element depends on the anchor
position. In other cases the anchor just regulates how much the result of the morphological
operation is shifted.
 */
CV_EXPORTS_W Mat getStructuringElement(int shape, Size ksize, Point anchor = Point(-1,-1));

/** @example samples/cpp/tutorial_code/ImgProc/Smoothing/Smoothing.cpp
Sample code for simple filters
![Sample screenshot](Smoothing_Tutorial_Result_Median_Filter.jpg)
Check @ref tutorial_gausian_median_blur_bilateral_filter "the corresponding tutorial" for more details
 */

/** @brief Blurs an image using the median filter.

The function smoothes an image using the median filter with the \f$\texttt{ksize} \times
\texttt{ksize}\f$ aperture. Each channel of a multi-channel image is processed independently.
In-place operation is supported.

@note The median filter uses #BORDER_REPLICATE internally to cope with border pixels, see #BorderTypes

@param src input 1-, 3-, or 4-channel image; when ksize is 3 or 5, the image depth should be
CV_8U, CV_16U, or CV_32F, for larger aperture sizes, it can only be CV_8U.
@param dst destination array of the same size and type as src.
@param ksize aperture linear size; it must be odd and greater than 1, for example: 3, 5, 7 ...
@sa  bilateralFilter, blur, boxFilter, GaussianBlur
 */
CV_EXPORTS_W void medianBlur( InputArray src, OutputArray dst, int ksize );

/** @brief Blurs an image using a Gaussian filter.

The function convolves the source image with the specified Gaussian kernel. In-place filtering is
supported.

@param src input image; the image can have any number of channels, which are processed
independently, but the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F.
@param dst output image of the same size and type as src.
@param ksize Gaussian kernel size. ksize.width and ksize.height can differ but they both must be
positive and odd. Or, they can be zero's and then they are computed from sigma.
@param sigmaX Gaussian kernel standard deviation in X direction.
@param sigmaY Gaussian kernel standard deviation in Y direction; if sigmaY is zero, it is set to be
equal to sigmaX, if both sigmas are zeros, they are computed from ksize.width and ksize.height,
respectively (see #getGaussianKernel for details); to fully control the result regardless of
possible future modifications of all this semantics, it is recommended to specify all of ksize,
sigmaX, and sigmaY.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.

@sa  sepFilter2D, filter2D, blur, boxFilter, bilateralFilter, medianBlur
 */
CV_EXPORTS_W void GaussianBlur( InputArray src, OutputArray dst, Size ksize,
                                double sigmaX, double sigmaY = 0,
                                int borderType = BORDER_DEFAULT );

/** @brief Applies the bilateral filter to an image.

The function applies bilateral filtering to the input image, as described in
http://www.dai.ed.ac.uk/CVonline/LOCAL_COPIES/MANDUCHI1/Bilateral_Filtering.html
bilateralFilter can reduce unwanted noise very well while keeping edges fairly sharp. However, it is
very slow compared to most filters.

_Sigma values_: For simplicity, you can set the 2 sigma values to be the same. If they are small (\<
10), the filter will not have much effect, whereas if they are large (\> 150), they will have a very
strong effect, making the image look "cartoonish".

_Filter size_: Large filters (d \> 5) are very slow, so it is recommended to use d=5 for real-time
applications, and perhaps d=9 for offline applications that need heavy noise filtering.

This filter does not work inplace.
@param src Source 8-bit or floating-point, 1-channel or 3-channel image.
@param dst Destination image of the same size and type as src .
@param d Diameter of each pixel neighborhood that is used during filtering. If it is non-positive,
it is computed from sigmaSpace.
@param sigmaColor Filter sigma in the color space. A larger value of the parameter means that
farther colors within the pixel neighborhood (see sigmaSpace) will be mixed together, resulting
in larger areas of semi-equal color.
@param sigmaSpace Filter sigma in the coordinate space. A larger value of the parameter means that
farther pixels will influence each other as long as their colors are close enough (see sigmaColor
). When d\>0, it specifies the neighborhood size regardless of sigmaSpace. Otherwise, d is
proportional to sigmaSpace.
@param borderType border mode used to extrapolate pixels outside of the image, see #BorderTypes
 */
CV_EXPORTS_W void bilateralFilter( InputArray src, OutputArray dst, int d,
                                   double sigmaColor, double sigmaSpace,
                                   int borderType = BORDER_DEFAULT );

/** @brief Blurs an image using the box filter.

The function smooths an image using the kernel:

\f[\texttt{K} =  \alpha \begin{bmatrix} 1 & 1 & 1 &  \cdots & 1 & 1  \\ 1 & 1 & 1 &  \cdots & 1 & 1  \\ \hdotsfor{6} \\ 1 & 1 & 1 &  \cdots & 1 & 1 \end{bmatrix}\f]

where

\f[\alpha = \begin{cases} \frac{1}{\texttt{ksize.width*ksize.height}} & \texttt{when } \texttt{normalize=true}  \\1 & \texttt{otherwise}\end{cases}\f]

Unnormalized box filter is useful for computing various integral characteristics over each pixel
neighborhood, such as covariance matrices of image derivatives (used in dense optical flow
algorithms, and so on). If you need to compute pixel sums over variable-size windows, use #integral.

@param src input image.
@param dst output image of the same size and type as src.
@param ddepth the output image depth (-1 to use src.depth()).
@param ksize blurring kernel size.
@param anchor anchor point; default value Point(-1,-1) means that the anchor is at the kernel
center.
@param normalize flag, specifying whether the kernel is normalized by its area or not.
@param borderType border mode used to extrapolate pixels outside of the image, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  blur, bilateralFilter, GaussianBlur, medianBlur, integral
 */
CV_EXPORTS_W void boxFilter( InputArray src, OutputArray dst, int ddepth,
                             Size ksize, Point anchor = Point(-1,-1),
                             bool normalize = true,
                             int borderType = BORDER_DEFAULT );

/** @brief Calculates the normalized sum of squares of the pixel values overlapping the filter.

For every pixel \f$ (x, y) \f$ in the source image, the function calculates the sum of squares of those neighboring
pixel values which overlap the filter placed over the pixel \f$ (x, y) \f$.

The unnormalized square box filter can be useful in computing local image statistics such as the the local
variance and standard deviation around the neighborhood of a pixel.

@param src input image
@param dst output image of the same size and type as _src
@param ddepth the output image depth (-1 to use src.depth())
@param ksize kernel size
@param anchor kernel anchor point. The default value of Point(-1, -1) denotes that the anchor is at the kernel
center.
@param normalize flag, specifying whether the kernel is to be normalized by it's area or not.
@param borderType border mode used to extrapolate pixels outside of the image, see #BorderTypes. #BORDER_WRAP is not supported.
@sa boxFilter
*/
CV_EXPORTS_W void sqrBoxFilter( InputArray src, OutputArray dst, int ddepth,
                                Size ksize, Point anchor = Point(-1, -1),
                                bool normalize = true,
                                int borderType = BORDER_DEFAULT );

/** @brief Blurs an image using the normalized box filter.

The function smooths an image using the kernel:

\f[\texttt{K} =  \frac{1}{\texttt{ksize.width*ksize.height}} \begin{bmatrix} 1 & 1 & 1 &  \cdots & 1 & 1  \\ 1 & 1 & 1 &  \cdots & 1 & 1  \\ \hdotsfor{6} \\ 1 & 1 & 1 &  \cdots & 1 & 1  \\ \end{bmatrix}\f]

The call `blur(src, dst, ksize, anchor, borderType)` is equivalent to `boxFilter(src, dst, src.type(), ksize,
anchor, true, borderType)`.

@param src input image; it can have any number of channels, which are processed independently, but
the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F.
@param dst output image of the same size and type as src.
@param ksize blurring kernel size.
@param anchor anchor point; default value Point(-1,-1) means that the anchor is at the kernel
center.
@param borderType border mode used to extrapolate pixels outside of the image, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  boxFilter, bilateralFilter, GaussianBlur, medianBlur
 */
CV_EXPORTS_W void blur( InputArray src, OutputArray dst,
                        Size ksize, Point anchor = Point(-1,-1),
                        int borderType = BORDER_DEFAULT );

/** @brief Convolves an image with the kernel.

The function applies an arbitrary linear filter to an image. In-place operation is supported. When
the aperture is partially outside the image, the function interpolates outlier pixel values
according to the specified border mode.

The function does actually compute correlation, not the convolution:

\f[\texttt{dst} (x,y) =  \sum _{ \substack{0\leq x' < \texttt{kernel.cols}\\{0\leq y' < \texttt{kernel.rows}}}}  \texttt{kernel} (x',y')* \texttt{src} (x+x'- \texttt{anchor.x} ,y+y'- \texttt{anchor.y} )\f]

That is, the kernel is not mirrored around the anchor point. If you need a real convolution, flip
the kernel using #flip and set the new anchor to `(kernel.cols - anchor.x - 1, kernel.rows -
anchor.y - 1)`.

The function uses the DFT-based algorithm in case of sufficiently large kernels (~`11 x 11` or
larger) and the direct algorithm for small kernels.

@param src input image.
@param dst output image of the same size and the same number of channels as src.
@param ddepth desired depth of the destination image, see @ref filter_depths "combinations"
@param kernel convolution kernel (or rather a correlation kernel), a single-channel floating point
matrix; if you want to apply different kernels to different channels, split the image into
separate color planes using split and process them individually.
@param anchor anchor of the kernel that indicates the relative position of a filtered point within
the kernel; the anchor should lie within the kernel; default value (-1,-1) means that the anchor
is at the kernel center.
@param delta optional value added to the filtered pixels before storing them in dst.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  sepFilter2D, dft, matchTemplate
 */
CV_EXPORTS_W void filter2D( InputArray src, OutputArray dst, int ddepth,
                            InputArray kernel, Point anchor = Point(-1,-1),
                            double delta = 0, int borderType = BORDER_DEFAULT );

/** @brief Applies a separable linear filter to an image.

The function applies a separable linear filter to the image. That is, first, every row of src is
filtered with the 1D kernel kernelX. Then, every column of the result is filtered with the 1D
kernel kernelY. The final result shifted by delta is stored in dst .

@param src Source image.
@param dst Destination image of the same size and the same number of channels as src .
@param ddepth Destination image depth, see @ref filter_depths "combinations"
@param kernelX Coefficients for filtering each row.
@param kernelY Coefficients for filtering each column.
@param anchor Anchor position within the kernel. The default value \f$(-1,-1)\f$ means that the anchor
is at the kernel center.
@param delta Value added to the filtered results before storing them.
@param borderType Pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  filter2D, Sobel, GaussianBlur, boxFilter, blur
 */
CV_EXPORTS_W void sepFilter2D( InputArray src, OutputArray dst, int ddepth,
                               InputArray kernelX, InputArray kernelY,
                               Point anchor = Point(-1,-1),
                               double delta = 0, int borderType = BORDER_DEFAULT );

/** @example samples/cpp/tutorial_code/ImgTrans/Sobel_Demo.cpp
Sample code using Sobel and/or Scharr OpenCV functions to make a simple Edge Detector
![Sample screenshot](Sobel_Derivatives_Tutorial_Result.jpg)
Check @ref tutorial_sobel_derivatives "the corresponding tutorial" for more details
*/

/** @brief Calculates the first, second, third, or mixed image derivatives using an extended Sobel operator.

In all cases except one, the \f$\texttt{ksize} \times \texttt{ksize}\f$ separable kernel is used to
calculate the derivative. When \f$\texttt{ksize = 1}\f$, the \f$3 \times 1\f$ or \f$1 \times 3\f$
kernel is used (that is, no Gaussian smoothing is done). `ksize = 1` can only be used for the first
or the second x- or y- derivatives.

There is also the special value `ksize = #FILTER_SCHARR (-1)` that corresponds to the \f$3\times3\f$ Scharr
filter that may give more accurate results than the \f$3\times3\f$ Sobel. The Scharr aperture is

\f[\vecthreethree{-3}{0}{3}{-10}{0}{10}{-3}{0}{3}\f]

for the x-derivative, or transposed for the y-derivative.

The function calculates an image derivative by convolving the image with the appropriate kernel:

\f[\texttt{dst} =  \frac{\partial^{xorder+yorder} \texttt{src}}{\partial x^{xorder} \partial y^{yorder}}\f]

The Sobel operators combine Gaussian smoothing and differentiation, so the result is more or less
resistant to the noise. Most often, the function is called with ( xorder = 1, yorder = 0, ksize = 3)
or ( xorder = 0, yorder = 1, ksize = 3) to calculate the first x- or y- image derivative. The first
case corresponds to a kernel of:

\f[\vecthreethree{-1}{0}{1}{-2}{0}{2}{-1}{0}{1}\f]

The second case corresponds to a kernel of:

\f[\vecthreethree{-1}{-2}{-1}{0}{0}{0}{1}{2}{1}\f]

@param src input image.
@param dst output image of the same size and the same number of channels as src .
@param ddepth output image depth, see @ref filter_depths "combinations"; in the case of
    8-bit input images it will result in truncated derivatives.
@param dx order of the derivative x.
@param dy order of the derivative y.
@param ksize size of the extended Sobel kernel; it must be 1, 3, 5, or 7.
@param scale optional scale factor for the computed derivative values; by default, no scaling is
applied (see #getDerivKernels for details).
@param delta optional delta value that is added to the results prior to storing them in dst.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  Scharr, Laplacian, sepFilter2D, filter2D, GaussianBlur, cartToPolar
 */
CV_EXPORTS_W void Sobel( InputArray src, OutputArray dst, int ddepth,
                         int dx, int dy, int ksize = 3,
                         double scale = 1, double delta = 0,
                         int borderType = BORDER_DEFAULT );

/** @brief Calculates the first order image derivative in both x and y using a Sobel operator

Equivalent to calling:

@code
Sobel( src, dx, CV_16SC1, 1, 0, 3 );
Sobel( src, dy, CV_16SC1, 0, 1, 3 );
@endcode

@param src input image.
@param dx output image with first-order derivative in x.
@param dy output image with first-order derivative in y.
@param ksize size of Sobel kernel. It must be 3.
@param borderType pixel extrapolation method, see #BorderTypes.
                  Only #BORDER_DEFAULT=#BORDER_REFLECT_101 and #BORDER_REPLICATE are supported.

@sa Sobel
 */

CV_EXPORTS_W void spatialGradient( InputArray src, OutputArray dx,
                                   OutputArray dy, int ksize = 3,
                                   int borderType = BORDER_DEFAULT );

/** @brief Calculates the first x- or y- image derivative using Scharr operator.

The function computes the first x- or y- spatial image derivative using the Scharr operator. The
call

\f[\texttt{Scharr(src, dst, ddepth, dx, dy, scale, delta, borderType)}\f]

is equivalent to

\f[\texttt{Sobel(src, dst, ddepth, dx, dy, FILTER_SCHARR, scale, delta, borderType)} .\f]

@param src input image.
@param dst output image of the same size and the same number of channels as src.
@param ddepth output image depth, see @ref filter_depths "combinations"
@param dx order of the derivative x.
@param dy order of the derivative y.
@param scale optional scale factor for the computed derivative values; by default, no scaling is
applied (see #getDerivKernels for details).
@param delta optional delta value that is added to the results prior to storing them in dst.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  cartToPolar
 */
CV_EXPORTS_W void Scharr( InputArray src, OutputArray dst, int ddepth,
                          int dx, int dy, double scale = 1, double delta = 0,
                          int borderType = BORDER_DEFAULT );

/** @example samples/cpp/laplace.cpp
An example using Laplace transformations for edge detection
*/

/** @brief Calculates the Laplacian of an image.

The function calculates the Laplacian of the source image by adding up the second x and y
derivatives calculated using the Sobel operator:

\f[\texttt{dst} =  \Delta \texttt{src} =  \frac{\partial^2 \texttt{src}}{\partial x^2} +  \frac{\partial^2 \texttt{src}}{\partial y^2}\f]

This is done when `ksize > 1`. When `ksize == 1`, the Laplacian is computed by filtering the image
with the following \f$3 \times 3\f$ aperture:

\f[\vecthreethree {0}{1}{0}{1}{-4}{1}{0}{1}{0}\f]

@param src Source image.
@param dst Destination image of the same size and the same number of channels as src .
@param ddepth Desired depth of the destination image.
@param ksize Aperture size used to compute the second-derivative filters. See #getDerivKernels for
details. The size must be positive and odd.
@param scale Optional scale factor for the computed Laplacian values. By default, no scaling is
applied. See #getDerivKernels for details.
@param delta Optional delta value that is added to the results prior to storing them in dst .
@param borderType Pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@sa  Sobel, Scharr
 */
CV_EXPORTS_W void Laplacian( InputArray src, OutputArray dst, int ddepth,
                             int ksize = 1, double scale = 1, double delta = 0,
                             int borderType = BORDER_DEFAULT );

//! @} imgproc_filter

//! @addtogroup imgproc_feature
//! @{

/** @example samples/cpp/edge.cpp
This program demonstrates usage of the Canny edge detector

Check @ref tutorial_canny_detector "the corresponding tutorial" for more details
*/

/** @brief Finds edges in an image using the Canny algorithm @cite Canny86 .

The function finds edges in the input image and marks them in the output map edges using the
Canny algorithm. The smallest value between threshold1 and threshold2 is used for edge linking. The
largest value is used to find initial segments of strong edges. See
<http://en.wikipedia.org/wiki/Canny_edge_detector>

@param image 8-bit input image.
@param edges output edge map; single channels 8-bit image, which has the same size as image .
@param threshold1 first threshold for the hysteresis procedure.
@param threshold2 second threshold for the hysteresis procedure.
@param apertureSize aperture size for the Sobel operator.
@param L2gradient a flag, indicating whether a more accurate \f$L_2\f$ norm
\f$=\sqrt{(dI/dx)^2 + (dI/dy)^2}\f$ should be used to calculate the image gradient magnitude (
L2gradient=true ), or whether the default \f$L_1\f$ norm \f$=|dI/dx|+|dI/dy|\f$ is enough (
L2gradient=false ).
 */
CV_EXPORTS_W void Canny( InputArray image, OutputArray edges,
                         double threshold1, double threshold2,
                         int apertureSize = 3, bool L2gradient = false );

/** \overload

Finds edges in an image using the Canny algorithm with custom image gradient.

@param dx 16-bit x derivative of input image (CV_16SC1 or CV_16SC3).
@param dy 16-bit y derivative of input image (same type as dx).
@param edges output edge map; single channels 8-bit image, which has the same size as image .
@param threshold1 first threshold for the hysteresis procedure.
@param threshold2 second threshold for the hysteresis procedure.
@param L2gradient a flag, indicating whether a more accurate \f$L_2\f$ norm
\f$=\sqrt{(dI/dx)^2 + (dI/dy)^2}\f$ should be used to calculate the image gradient magnitude (
L2gradient=true ), or whether the default \f$L_1\f$ norm \f$=|dI/dx|+|dI/dy|\f$ is enough (
L2gradient=false ).
 */
CV_EXPORTS_W void Canny( InputArray dx, InputArray dy,
                         OutputArray edges,
                         double threshold1, double threshold2,
                         bool L2gradient = false );

/** @brief Calculates the minimal eigenvalue of gradient matrices for corner detection.

The function is similar to cornerEigenValsAndVecs but it calculates and stores only the minimal
eigenvalue of the covariance matrix of derivatives, that is, \f$\min(\lambda_1, \lambda_2)\f$ in terms
of the formulae in the cornerEigenValsAndVecs description.

@param src Input single-channel 8-bit or floating-point image.
@param dst Image to store the minimal eigenvalues. It has the type CV_32FC1 and the same size as
src .
@param blockSize Neighborhood size (see the details on #cornerEigenValsAndVecs ).
@param ksize Aperture parameter for the Sobel operator.
@param borderType Pixel extrapolation method. See #BorderTypes. #BORDER_WRAP is not supported.
 */
CV_EXPORTS_W void cornerMinEigenVal( InputArray src, OutputArray dst,
                                     int blockSize, int ksize = 3,
                                     int borderType = BORDER_DEFAULT );

/** @brief Harris corner detector.

The function runs the Harris corner detector on the image. Similarly to cornerMinEigenVal and
cornerEigenValsAndVecs , for each pixel \f$(x, y)\f$ it calculates a \f$2\times2\f$ gradient covariance
matrix \f$M^{(x,y)}\f$ over a \f$\texttt{blockSize} \times \texttt{blockSize}\f$ neighborhood. Then, it
computes the following characteristic:

\f[\texttt{dst} (x,y) =  \mathrm{det} M^{(x,y)} - k  \cdot \left ( \mathrm{tr} M^{(x,y)} \right )^2\f]

Corners in the image can be found as the local maxima of this response map.

@param src Input single-channel 8-bit or floating-point image.
@param dst Image to store the Harris detector responses. It has the type CV_32FC1 and the same
size as src .
@param blockSize Neighborhood size (see the details on #cornerEigenValsAndVecs ).
@param ksize Aperture parameter for the Sobel operator.
@param k Harris detector free parameter. See the formula above.
@param borderType Pixel extrapolation method. See #BorderTypes. #BORDER_WRAP is not supported.
 */
CV_EXPORTS_W void cornerHarris( InputArray src, OutputArray dst, int blockSize,
                                int ksize, double k,
                                int borderType = BORDER_DEFAULT );

/** @brief Calculates eigenvalues and eigenvectors of image blocks for corner detection.

For every pixel \f$p\f$ , the function cornerEigenValsAndVecs considers a blockSize \f$\times\f$ blockSize
neighborhood \f$S(p)\f$ . It calculates the covariation matrix of derivatives over the neighborhood as:

\f[M =  \begin{bmatrix} \sum _{S(p)}(dI/dx)^2 &  \sum _{S(p)}dI/dx dI/dy  \\ \sum _{S(p)}dI/dx dI/dy &  \sum _{S(p)}(dI/dy)^2 \end{bmatrix}\f]

where the derivatives are computed using the Sobel operator.

After that, it finds eigenvectors and eigenvalues of \f$M\f$ and stores them in the destination image as
\f$(\lambda_1, \lambda_2, x_1, y_1, x_2, y_2)\f$ where

-   \f$\lambda_1, \lambda_2\f$ are the non-sorted eigenvalues of \f$M\f$
-   \f$x_1, y_1\f$ are the eigenvectors corresponding to \f$\lambda_1\f$
-   \f$x_2, y_2\f$ are the eigenvectors corresponding to \f$\lambda_2\f$

The output of the function can be used for robust edge or corner detection.

@param src Input single-channel 8-bit or floating-point image.
@param dst Image to store the results. It has the same size as src and the type CV_32FC(6) .
@param blockSize Neighborhood size (see details below).
@param ksize Aperture parameter for the Sobel operator.
@param borderType Pixel extrapolation method. See #BorderTypes. #BORDER_WRAP is not supported.

@sa  cornerMinEigenVal, cornerHarris, preCornerDetect
 */
CV_EXPORTS_W void cornerEigenValsAndVecs( InputArray src, OutputArray dst,
                                          int blockSize, int ksize,
                                          int borderType = BORDER_DEFAULT );

/** @brief Calculates a feature map for corner detection.

The function calculates the complex spatial derivative-based function of the source image

\f[\texttt{dst} = (D_x  \texttt{src} )^2  \cdot D_{yy}  \texttt{src} + (D_y  \texttt{src} )^2  \cdot D_{xx}  \texttt{src} - 2 D_x  \texttt{src} \cdot D_y  \texttt{src} \cdot D_{xy}  \texttt{src}\f]

where \f$D_x\f$,\f$D_y\f$ are the first image derivatives, \f$D_{xx}\f$,\f$D_{yy}\f$ are the second image
derivatives, and \f$D_{xy}\f$ is the mixed derivative.

The corners can be found as local maximums of the functions, as shown below:
@code
    Mat corners, dilated_corners;
    preCornerDetect(image, corners, 3);
    // dilation with 3x3 rectangular structuring element
    dilate(corners, dilated_corners, Mat(), 1);
    Mat corner_mask = corners == dilated_corners;
@endcode

@param src Source single-channel 8-bit of floating-point image.
@param dst Output image that has the type CV_32F and the same size as src .
@param ksize %Aperture size of the Sobel .
@param borderType Pixel extrapolation method. See #BorderTypes. #BORDER_WRAP is not supported.
 */
CV_EXPORTS_W void preCornerDetect( InputArray src, OutputArray dst, int ksize,
                                   int borderType = BORDER_DEFAULT );

/** @brief Refines the corner locations.

The function iterates to find the sub-pixel accurate location of corners or radial saddle
points as described in @cite forstner1987fast, and as shown on the figure below.

![image](pics/cornersubpix.png)

Sub-pixel accurate corner locator is based on the observation that every vector from the center \f$q\f$
to a point \f$p\f$ located within a neighborhood of \f$q\f$ is orthogonal to the image gradient at \f$p\f$
subject to image and measurement noise. Consider the expression:

\f[\epsilon _i = {DI_{p_i}}^T  \cdot (q - p_i)\f]

where \f${DI_{p_i}}\f$ is an image gradient at one of the points \f$p_i\f$ in a neighborhood of \f$q\f$ . The
value of \f$q\f$ is to be found so that \f$\epsilon_i\f$ is minimized. A system of equations may be set up
with \f$\epsilon_i\f$ set to zero:

\f[\sum _i(DI_{p_i}  \cdot {DI_{p_i}}^T) \cdot q -  \sum _i(DI_{p_i}  \cdot {DI_{p_i}}^T  \cdot p_i)\f]

where the gradients are summed within a neighborhood ("search window") of \f$q\f$ . Calling the first
gradient term \f$G\f$ and the second gradient term \f$b\f$ gives:

\f[q = G^{-1}  \cdot b\f]

The algorithm sets the center of the neighborhood window at this new center \f$q\f$ and then iterates
until the center stays within a set threshold.

@param image Input single-channel, 8-bit or float image.
@param corners Initial coordinates of the input corners and refined coordinates provided for
output.
@param winSize Half of the side length of the search window. For example, if winSize=Size(5,5) ,
then a \f$(5*2+1) \times (5*2+1) = 11 \times 11\f$ search window is used.
@param zeroZone Half of the size of the dead region in the middle of the search zone over which
the summation in the formula below is not done. It is used sometimes to avoid possible
singularities of the autocorrelation matrix. The value of (-1,-1) indicates that there is no such
a size.
@param criteria Criteria for termination of the iterative process of corner refinement. That is,
the process of corner position refinement stops either after criteria.maxCount iterations or when
the corner position moves by less than criteria.epsilon on some iteration.
 */
CV_EXPORTS_W void cornerSubPix( InputArray image, InputOutputArray corners,
                                Size winSize, Size zeroZone,
                                TermCriteria criteria );

/** @brief Determines strong corners on an image.

The function finds the most prominent corners in the image or in the specified image region, as
described in @cite Shi94

-   Function calculates the corner quality measure at every source image pixel using the
    #cornerMinEigenVal or #cornerHarris .
-   Function performs a non-maximum suppression (the local maximums in *3 x 3* neighborhood are
    retained).
-   The corners with the minimal eigenvalue less than
    \f$\texttt{qualityLevel} \cdot \max_{x,y} qualityMeasureMap(x,y)\f$ are rejected.
-   The remaining corners are sorted by the quality measure in the descending order.
-   Function throws away each corner for which there is a stronger corner at a distance less than
    maxDistance.

The function can be used to initialize a point-based tracker of an object.

@note If the function is called with different values A and B of the parameter qualityLevel , and
A \> B, the vector of returned corners with qualityLevel=A will be the prefix of the output vector
with qualityLevel=B .

@param image Input 8-bit or floating-point 32-bit, single-channel image.
@param corners Output vector of detected corners.
@param maxCorners Maximum number of corners to return. If there are more corners than are found,
the strongest of them is returned. `maxCorners <= 0` implies that no limit on the maximum is set
and all detected corners are returned.
@param qualityLevel Parameter characterizing the minimal accepted quality of image corners. The
parameter value is multiplied by the best corner quality measure, which is the minimal eigenvalue
(see #cornerMinEigenVal ) or the Harris function response (see #cornerHarris ). The corners with the
quality measure less than the product are rejected. For example, if the best corner has the
quality measure = 1500, and the qualityLevel=0.01 , then all the corners with the quality measure
less than 15 are rejected.
@param minDistance Minimum possible Euclidean distance between the returned corners.
@param mask Optional region of interest. If the image is not empty (it needs to have the type
CV_8UC1 and the same size as image ), it specifies the region in which the corners are detected.
@param blockSize Size of an average block for computing a derivative covariation matrix over each
pixel neighborhood. See cornerEigenValsAndVecs .
@param useHarrisDetector Parameter indicating whether to use a Harris detector (see #cornerHarris)
or #cornerMinEigenVal.
@param k Free parameter of the Harris detector.

@sa  cornerMinEigenVal, cornerHarris, calcOpticalFlowPyrLK, estimateRigidTransform,
 */

CV_EXPORTS_W void goodFeaturesToTrack( InputArray image, OutputArray corners,
                                     int maxCorners, double qualityLevel, double minDistance,
                                     InputArray mask = noArray(), int blockSize = 3,
                                     bool useHarrisDetector = false, double k = 0.04 );

CV_EXPORTS_W void goodFeaturesToTrack( InputArray image, OutputArray corners,
                                     int maxCorners, double qualityLevel, double minDistance,
                                     InputArray mask, int blockSize,
                                     int gradientSize, bool useHarrisDetector = false,
                                     double k = 0.04 );
/** @example samples/cpp/tutorial_code/ImgTrans/houghlines.cpp
An example using the Hough line detector
![Sample input image](Hough_Lines_Tutorial_Original_Image.jpg) ![Output image](Hough_Lines_Tutorial_Result.jpg)
*/

/** @brief Finds lines in a binary image using the standard Hough transform.

The function implements the standard or standard multi-scale Hough transform algorithm for line
detection. See <http://homepages.inf.ed.ac.uk/rbf/HIPR2/hough.htm> for a good explanation of Hough
transform.

@param image 8-bit, single-channel binary source image. The image may be modified by the function.
@param lines Output vector of lines. Each line is represented by a 2 or 3 element vector
\f$(\rho, \theta)\f$ or \f$(\rho, \theta, \textrm{votes})\f$ . \f$\rho\f$ is the distance from the coordinate origin \f$(0,0)\f$ (top-left corner of
the image). \f$\theta\f$ is the line rotation angle in radians (
\f$0 \sim \textrm{vertical line}, \pi/2 \sim \textrm{horizontal line}\f$ ).
\f$\textrm{votes}\f$ is the value of accumulator.
@param rho Distance resolution of the accumulator in pixels.
@param theta Angle resolution of the accumulator in radians.
@param threshold Accumulator threshold parameter. Only those lines are returned that get enough
votes ( \f$>\texttt{threshold}\f$ ).
@param srn For the multi-scale Hough transform, it is a divisor for the distance resolution rho .
The coarse accumulator distance resolution is rho and the accurate accumulator resolution is
rho/srn . If both srn=0 and stn=0 , the classical Hough transform is used. Otherwise, both these
parameters should be positive.
@param stn For the multi-scale Hough transform, it is a divisor for the distance resolution theta.
@param min_theta For standard and multi-scale Hough transform, minimum angle to check for lines.
Must fall between 0 and max_theta.
@param max_theta For standard and multi-scale Hough transform, maximum angle to check for lines.
Must fall between min_theta and CV_PI.
 */
CV_EXPORTS_W void HoughLines( InputArray image, OutputArray lines,
                              double rho, double theta, int threshold,
                              double srn = 0, double stn = 0,
                              double min_theta = 0, double max_theta = CV_PI );

/** @brief Finds line segments in a binary image using the probabilistic Hough transform.

The function implements the probabilistic Hough transform algorithm for line detection, described
in @cite Matas00

See the line detection example below:
@include snippets/imgproc_HoughLinesP.cpp
This is a sample picture the function parameters have been tuned for:

![image](pics/building.jpg)

And this is the output of the above program in case of the probabilistic Hough transform:

![image](pics/houghp.png)

@param image 8-bit, single-channel binary source image. The image may be modified by the function.
@param lines Output vector of lines. Each line is represented by a 4-element vector
\f$(x_1, y_1, x_2, y_2)\f$ , where \f$(x_1,y_1)\f$ and \f$(x_2, y_2)\f$ are the ending points of each detected
line segment.
@param rho Distance resolution of the accumulator in pixels.
@param theta Angle resolution of the accumulator in radians.
@param threshold Accumulator threshold parameter. Only those lines are returned that get enough
votes ( \f$>\texttt{threshold}\f$ ).
@param minLineLength Minimum line length. Line segments shorter than that are rejected.
@param maxLineGap Maximum allowed gap between points on the same line to link them.

@sa LineSegmentDetector
 */
CV_EXPORTS_W void HoughLinesP( InputArray image, OutputArray lines,
                               double rho, double theta, int threshold,
                               double minLineLength = 0, double maxLineGap = 0 );

/** @brief Finds lines in a set of points using the standard Hough transform.

The function finds lines in a set of points using a modification of the Hough transform.
@include snippets/imgproc_HoughLinesPointSet.cpp
@param _point Input vector of points. Each vector must be encoded as a Point vector \f$(x,y)\f$. Type must be CV_32FC2 or CV_32SC2.
@param _lines Output vector of found lines. Each vector is encoded as a vector<Vec3d> \f$(votes, rho, theta)\f$.
The larger the value of 'votes', the higher the reliability of the Hough line.
@param lines_max Max count of hough lines.
@param threshold Accumulator threshold parameter. Only those lines are returned that get enough
votes ( \f$>\texttt{threshold}\f$ )
@param min_rho Minimum Distance value of the accumulator in pixels.
@param max_rho Maximum Distance value of the accumulator in pixels.
@param rho_step Distance resolution of the accumulator in pixels.
@param min_theta Minimum angle value of the accumulator in radians.
@param max_theta Maximum angle value of the accumulator in radians.
@param theta_step Angle resolution of the accumulator in radians.
 */
CV_EXPORTS_W void HoughLinesPointSet( InputArray _point, OutputArray _lines, int lines_max, int threshold,
                                      double min_rho, double max_rho, double rho_step,
                                      double min_theta, double max_theta, double theta_step );

/** @example samples/cpp/tutorial_code/ImgTrans/houghcircles.cpp
An example using the Hough circle detector
*/

/** @brief Finds circles in a grayscale image using the Hough transform.

The function finds circles in a grayscale image using a modification of the Hough transform.

Example: :
@include snippets/imgproc_HoughLinesCircles.cpp

@note Usually the function detects the centers of circles well. However, it may fail to find correct
radii. You can assist to the function by specifying the radius range ( minRadius and maxRadius ) if
you know it. Or, in the case of #HOUGH_GRADIENT method you may set maxRadius to a negative number
to return centers only without radius search, and find the correct radius using an additional procedure.

It also helps to smooth image a bit unless it's already soft. For example,
GaussianBlur() with 7x7 kernel and 1.5x1.5 sigma or similar blurring may help.

@param image 8-bit, single-channel, grayscale input image.
@param circles Output vector of found circles. Each vector is encoded as  3 or 4 element
floating-point vector \f$(x, y, radius)\f$ or \f$(x, y, radius, votes)\f$ .
@param method Detection method, see #HoughModes. The available methods are #HOUGH_GRADIENT and #HOUGH_GRADIENT_ALT.
@param dp Inverse ratio of the accumulator resolution to the image resolution. For example, if
dp=1 , the accumulator has the same resolution as the input image. If dp=2 , the accumulator has
half as big width and height. For #HOUGH_GRADIENT_ALT the recommended value is dp=1.5,
unless some small very circles need to be detected.
@param minDist Minimum distance between the centers of the detected circles. If the parameter is
too small, multiple neighbor circles may be falsely detected in addition to a true one. If it is
too large, some circles may be missed.
@param param1 First method-specific parameter. In case of #HOUGH_GRADIENT and #HOUGH_GRADIENT_ALT,
it is the higher threshold of the two passed to the Canny edge detector (the lower one is twice smaller).
Note that #HOUGH_GRADIENT_ALT uses #Scharr algorithm to compute image derivatives, so the threshold value
shough normally be higher, such as 300 or normally exposed and contrasty images.
@param param2 Second method-specific parameter. In case of #HOUGH_GRADIENT, it is the
accumulator threshold for the circle centers at the detection stage. The smaller it is, the more
false circles may be detected. Circles, corresponding to the larger accumulator values, will be
returned first. In the case of #HOUGH_GRADIENT_ALT algorithm, this is the circle "perfectness" measure.
The closer it to 1, the better shaped circles algorithm selects. In most cases 0.9 should be fine.
If you want get better detection of small circles, you may decrease it to 0.85, 0.8 or even less.
But then also try to limit the search range [minRadius, maxRadius] to avoid many false circles.
@param minRadius Minimum circle radius.
@param maxRadius Maximum circle radius. If <= 0, uses the maximum image dimension. If < 0, #HOUGH_GRADIENT returns
centers without finding the radius. #HOUGH_GRADIENT_ALT always computes circle radiuses.

@sa fitEllipse, minEnclosingCircle
 */
CV_EXPORTS_W void HoughCircles( InputArray image, OutputArray circles,
                               int method, double dp, double minDist,
                               double param1 = 100, double param2 = 100,
                               int minRadius = 0, int maxRadius = 0 );

//! @} imgproc_feature

//! @addtogroup imgproc_filter
//! @{

/** @example samples/cpp/tutorial_code/ImgProc/Morphology_2.cpp
Advanced morphology Transformations sample code
![Sample screenshot](Morphology_2_Tutorial_Result.jpg)
Check @ref tutorial_opening_closing_hats "the corresponding tutorial" for more details
*/

/** @brief Erodes an image by using a specific structuring element.

The function erodes the source image using the specified structuring element that determines the
shape of a pixel neighborhood over which the minimum is taken:

\f[\texttt{dst} (x,y) =  \min _{(x',y'):  \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')\f]

The function supports the in-place mode. Erosion can be applied several ( iterations ) times. In
case of multi-channel images, each channel is processed independently.

@param src input image; the number of channels can be arbitrary, but the depth should be one of
CV_8U, CV_16U, CV_16S, CV_32F or CV_64F.
@param dst output image of the same size and type as src.
@param kernel structuring element used for erosion; if `element=Mat()`, a `3 x 3` rectangular
structuring element is used. Kernel can be created using #getStructuringElement.
@param anchor position of the anchor within the element; default value (-1, -1) means that the
anchor is at the element center.
@param iterations number of times erosion is applied.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@param borderValue border value in case of a constant border
@sa  dilate, morphologyEx, getStructuringElement
 */
CV_EXPORTS_W void erode( InputArray src, OutputArray dst, InputArray kernel,
                         Point anchor = Point(-1,-1), int iterations = 1,
                         int borderType = BORDER_CONSTANT,
                         const Scalar& borderValue = morphologyDefaultBorderValue() );

/** @example samples/cpp/tutorial_code/ImgProc/Morphology_1.cpp
Erosion and Dilation sample code
![Sample Screenshot-Erosion](Morphology_1_Tutorial_Erosion_Result.jpg)![Sample Screenshot-Dilation](Morphology_1_Tutorial_Dilation_Result.jpg)
Check @ref tutorial_erosion_dilatation "the corresponding tutorial" for more details
*/

/** @brief Dilates an image by using a specific structuring element.

The function dilates the source image using the specified structuring element that determines the
shape of a pixel neighborhood over which the maximum is taken:
\f[\texttt{dst} (x,y) =  \max _{(x',y'):  \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')\f]

The function supports the in-place mode. Dilation can be applied several ( iterations ) times. In
case of multi-channel images, each channel is processed independently.

@param src input image; the number of channels can be arbitrary, but the depth should be one of
CV_8U, CV_16U, CV_16S, CV_32F or CV_64F.
@param dst output image of the same size and type as src.
@param kernel structuring element used for dilation; if elemenat=Mat(), a 3 x 3 rectangular
structuring element is used. Kernel can be created using #getStructuringElement
@param anchor position of the anchor within the element; default value (-1, -1) means that the
anchor is at the element center.
@param iterations number of times dilation is applied.
@param borderType pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not suported.
@param borderValue border value in case of a constant border
@sa  erode, morphologyEx, getStructuringElement
 */
CV_EXPORTS_W void dilate( InputArray src, OutputArray dst, InputArray kernel,
                          Point anchor = Point(-1,-1), int iterations = 1,
                          int borderType = BORDER_CONSTANT,
                          const Scalar& borderValue = morphologyDefaultBorderValue() );

/** @brief Performs advanced morphological transformations.

The function cv::morphologyEx can perform advanced morphological transformations using an erosion and dilation as
basic operations.

Any of the operations can be done in-place. In case of multi-channel images, each channel is
processed independently.

@param src Source image. The number of channels can be arbitrary. The depth should be one of
CV_8U, CV_16U, CV_16S, CV_32F or CV_64F.
@param dst Destination image of the same size and type as source image.
@param op Type of a morphological operation, see #MorphTypes
@param kernel Structuring element. It can be created using #getStructuringElement.
@param anchor Anchor position with the kernel. Negative values mean that the anchor is at the
kernel center.
@param iterations Number of times erosion and dilation are applied.
@param borderType Pixel extrapolation method, see #BorderTypes. #BORDER_WRAP is not supported.
@param borderValue Border value in case of a constant border. The default value has a special
meaning.
@sa  dilate, erode, getStructuringElement
@note The number of iterations is the number of times erosion or dilatation operation will be applied.
For instance, an opening operation (#MORPH_OPEN) with two iterations is equivalent to apply
successively: erode -> erode -> dilate -> dilate (and not erode -> dilate -> erode -> dilate).
 */
CV_EXPORTS_W void morphologyEx( InputArray src, OutputArray dst,
                                int op, InputArray kernel,
                                Point anchor = Point(-1,-1), int iterations = 1,
                                int borderType = BORDER_CONSTANT,
                                const Scalar& borderValue = morphologyDefaultBorderValue() );

//! @} imgproc_filter

//! @addtogroup imgproc_transform
//! @{

/** @brief Resizes an image.

The function resize resizes the image src down to or up to the specified size. Note that the
initial dst type or size are not taken into account. Instead, the size and type are derived from
the `src`,`dsize`,`fx`, and `fy`. If you want to resize src so that it fits the pre-created dst,
you may call the function as follows:
@code
    // explicitly specify dsize=dst.size(); fx and fy will be computed from that.
    resize(src, dst, dst.size(), 0, 0, interpolation);
@endcode
If you want to decimate the image by factor of 2 in each direction, you can call the function this
way:
@code
    // specify fx and fy and let the function compute the destination image size.
    resize(src, dst, Size(), 0.5, 0.5, interpolation);
@endcode
To shrink an image, it will generally look best with #INTER_AREA interpolation, whereas to
enlarge an image, it will generally look best with c#INTER_CUBIC (slow) or #INTER_LINEAR
(faster but still looks OK).

@param src input image.
@param dst output image; it has the size dsize (when it is non-zero) or the size computed from
src.size(), fx, and fy; the type of dst is the same as of src.
@param dsize output image size; if it equals zero, it is computed as:
 \f[\texttt{dsize = Size(round(fx*src.cols), round(fy*src.rows))}\f]
 Either dsize or both fx and fy must be non-zero.
@param fx scale factor along the horizontal axis; when it equals 0, it is computed as
\f[\texttt{(double)dsize.width/src.cols}\f]
@param fy scale factor along the vertical axis; when it equals 0, it is computed as
\f[\texttt{(double)dsize.height/src.rows}\f]
@param interpolation interpolation method, see #InterpolationFlags

@sa  warpAffine, warpPerspective, remap
 */
CV_EXPORTS_W void resize( InputArray src, OutputArray dst,
                          Size dsize, double fx = 0, double fy = 0,
                          int interpolation = INTER_LINEAR );

/** @brief Applies an affine transformation to an image.

The function warpAffine transforms the source image using the specified matrix:

\f[\texttt{dst} (x,y) =  \texttt{src} ( \texttt{M} _{11} x +  \texttt{M} _{12} y +  \texttt{M} _{13}, \texttt{M} _{21} x +  \texttt{M} _{22} y +  \texttt{M} _{23})\f]

when the flag #WARP_INVERSE_MAP is set. Otherwise, the transformation is first inverted
with #invertAffineTransform and then put in the formula above instead of M. The function cannot
operate in-place.

@param src input image.
@param dst output image that has the size dsize and the same type as src .
@param M \f$2\times 3\f$ transformation matrix.
@param dsize size of the output image.
@param flags combination of interpolation methods (see #InterpolationFlags) and the optional
flag #WARP_INVERSE_MAP that means that M is the inverse transformation (
\f$\texttt{dst}\rightarrow\texttt{src}\f$ ).
@param borderMode pixel extrapolation method (see #BorderTypes); when
borderMode=#BORDER_TRANSPARENT, it means that the pixels in the destination image corresponding to
the "outliers" in the source image are not modified by the function.
@param borderValue value used in case of a constant border; by default, it is 0.

@sa  warpPerspective, resize, remap, getRectSubPix, transform
 */
CV_EXPORTS_W void warpAffine( InputArray src, OutputArray dst,
                              InputArray M, Size dsize,
                              int flags = INTER_LINEAR,
                              int borderMode = BORDER_CONSTANT,
                              const Scalar& borderValue = Scalar());

/** @example samples/cpp/warpPerspective_demo.cpp
An example program shows using cv::getPerspectiveTransform and cv::warpPerspective for image warping
*/

/** @brief Applies a perspective transformation to an image.

The function warpPerspective transforms the source image using the specified matrix:

\f[\texttt{dst} (x,y) =  \texttt{src} \left ( \frac{M_{11} x + M_{12} y + M_{13}}{M_{31} x + M_{32} y + M_{33}} ,
     \frac{M_{21} x + M_{22} y + M_{23}}{M_{31} x + M_{32} y + M_{33}} \right )\f]

when the flag #WARP_INVERSE_MAP is set. Otherwise, the transformation is first inverted with invert
and then put in the formula above instead of M. The function cannot operate in-place.

@param src input image.
@param dst output image that has the size dsize and the same type as src .
@param M \f$3\times 3\f$ transformation matrix.
@param dsize size of the output image.
@param flags combination of interpolation methods (#INTER_LINEAR or #INTER_NEAREST) and the
optional flag #WARP_INVERSE_MAP, that sets M as the inverse transformation (
\f$\texttt{dst}\rightarrow\texttt{src}\f$ ).
@param borderMode pixel extrapolation method (#BORDER_CONSTANT or #BORDER_REPLICATE).
@param borderValue value used in case of a constant border; by default, it equals 0.

@sa  warpAffine, resize, remap, getRectSubPix, perspectiveTransform
 */
CV_EXPORTS_W void warpPerspective( InputArray src, OutputArray dst,
                                   InputArray M, Size dsize,
                                   int flags = INTER_LINEAR,
                                   int borderMode = BORDER_CONSTANT,
                                   const Scalar& borderValue = Scalar());

/** @brief Applies a generic geometrical transformation to an image.

The function remap transforms the source image using the specified map:

\f[\texttt{dst} (x,y) =  \texttt{src} (map_x(x,y),map_y(x,y))\f]

where values of pixels with non-integer coordinates are computed using one of available
interpolation methods. \f$map_x\f$ and \f$map_y\f$ can be encoded as separate floating-point maps
in \f$map_1\f$ and \f$map_2\f$ respectively, or interleaved floating-point maps of \f$(x,y)\f$ in
\f$map_1\f$, or fixed-point maps created by using convertMaps. The reason you might want to
convert from floating to fixed-point representations of a map is that they can yield much faster
(\~2x) remapping operations. In the converted case, \f$map_1\f$ contains pairs (cvFloor(x),
cvFloor(y)) and \f$map_2\f$ contains indices in a table of interpolation coefficients.

This function cannot operate in-place.

@param src Source image.
@param dst Destination image. It has the same size as map1 and the same type as src .
@param map1 The first map of either (x,y) points or just x values having the type CV_16SC2 ,
CV_32FC1, or CV_32FC2. See convertMaps for details on converting a floating point
representation to fixed-point for speed.
@param map2 The second map of y values having the type CV_16UC1, CV_32FC1, or none (empty map
if map1 is (x,y) points), respectively.
@param interpolation Interpolation method (see #InterpolationFlags). The methods #INTER_AREA
and #INTER_LINEAR_EXACT are not supported by this function.
@param borderMode Pixel extrapolation method (see #BorderTypes). When
borderMode=#BORDER_TRANSPARENT, it means that the pixels in the destination image that
corresponds to the "outliers" in the source image are not modified by the function.
@param borderValue Value used in case of a constant border. By default, it is 0.
@note
Due to current implementation limitations the size of an input and output images should be less than 32767x32767.
 */
CV_EXPORTS_W void remap( InputArray src, OutputArray dst,
                         InputArray map1, InputArray map2,
                         int interpolation, int borderMode = BORDER_CONSTANT,
                         const Scalar& borderValue = Scalar());

/** @brief Converts image transformation maps from one representation to another.

The function converts a pair of maps for remap from one representation to another. The following
options ( (map1.type(), map2.type()) \f$\rightarrow\f$ (dstmap1.type(), dstmap2.type()) ) are
supported:

- \f$\texttt{(CV_32FC1, CV_32FC1)} \rightarrow \texttt{(CV_16SC2, CV_16UC1)}\f$. This is the
most frequently used conversion operation, in which the original floating-point maps (see remap )
are converted to a more compact and much faster fixed-point representation. The first output array
contains the rounded coordinates and the second array (created only when nninterpolation=false )
contains indices in the interpolation tables.

- \f$\texttt{(CV_32FC2)} \rightarrow \texttt{(CV_16SC2, CV_16UC1)}\f$. The same as above but
the original maps are stored in one 2-channel matrix.

- Reverse conversion. Obviously, the reconstructed floating-point maps will not be exactly the same
as the originals.

@param map1 The first input map of type CV_16SC2, CV_32FC1, or CV_32FC2 .
@param map2 The second input map of type CV_16UC1, CV_32FC1, or none (empty matrix),
respectively.
@param dstmap1 The first output map that has the type dstmap1type and the same size as src .
@param dstmap2 The second output map.
@param dstmap1type Type of the first output map that should be CV_16SC2, CV_32FC1, or
CV_32FC2 .
@param nninterpolation Flag indicating whether the fixed-point maps are used for the
nearest-neighbor or for a more complex interpolation.

@sa  remap, undistort, initUndistortRectifyMap
 */
CV_EXPORTS_W void convertMaps( InputArray map1, InputArray map2,
                               OutputArray dstmap1, OutputArray dstmap2,
                               int dstmap1type, bool nninterpolation = false );

/** @brief Calculates an affine matrix of 2D rotation.

The function calculates the following matrix:

\f[\begin{bmatrix} \alpha &  \beta & (1- \alpha )  \cdot \texttt{center.x} -  \beta \cdot \texttt{center.y} \\ - \beta &  \alpha &  \beta \cdot \texttt{center.x} + (1- \alpha )  \cdot \texttt{center.y} \end{bmatrix}\f]

where

\f[\begin{array}{l} \alpha =  \texttt{scale} \cdot \cos \texttt{angle} , \\ \beta =  \texttt{scale} \cdot \sin \texttt{angle} \end{array}\f]

The transformation maps the rotation center to itself. If this is not the target, adjust the shift.

@param center Center of the rotation in the source image.
@param angle Rotation angle in degrees. Positive values mean counter-clockwise rotation (the
coordinate origin is assumed to be the top-left corner).
@param scale Isotropic scale factor.

@sa  getAffineTransform, warpAffine, transform
 */
CV_EXPORTS_W Mat getRotationMatrix2D(Point2f center, double angle, double scale);

/** @sa getRotationMatrix2D */
CV_EXPORTS Matx23d getRotationMatrix2D_(Point2f center, double angle, double scale);

inline
Mat getRotationMatrix2D(Point2f center, double angle, double scale)
{
    return Mat(getRotationMatrix2D_(center, angle, scale), true);
}

/** @brief Calculates an affine transform from three pairs of the corresponding points.

The function calculates the \f$2 \times 3\f$ matrix of an affine transform so that:

\f[\begin{bmatrix} x'_i \\ y'_i \end{bmatrix} = \texttt{map_matrix} \cdot \begin{bmatrix} x_i \\ y_i \\ 1 \end{bmatrix}\f]

where

\f[dst(i)=(x'_i,y'_i), src(i)=(x_i, y_i), i=0,1,2\f]

@param src Coordinates of triangle vertices in the source image.
@param dst Coordinates of the corresponding triangle vertices in the destination image.

@sa  warpAffine, transform
 */
CV_EXPORTS Mat getAffineTransform( const Point2f src[], const Point2f dst[] );

/** @brief Inverts an affine transformation.

The function computes an inverse affine transformation represented by \f$2 \times 3\f$ matrix M:

\f[\begin{bmatrix} a_{11} & a_{12} & b_1  \\ a_{21} & a_{22} & b_2 \end{bmatrix}\f]

The result is also a \f$2 \times 3\f$ matrix of the same type as M.

@param M Original affine transformation.
@param iM Output reverse affine transformation.
 */
CV_EXPORTS_W void invertAffineTransform( InputArray M, OutputArray iM );

/** @brief Calculates a perspective transform from four pairs of the corresponding points.

The function calculates the \f$3 \times 3\f$ matrix of a perspective transform so that:

\f[\begin{bmatrix} t_i x'_i \\ t_i y'_i \\ t_i \end{bmatrix} = \texttt{map_matrix} \cdot \begin{bmatrix} x_i \\ y_i \\ 1 \end{bmatrix}\f]

where

\f[dst(i)=(x'_i,y'_i), src(i)=(x_i, y_i), i=0,1,2,3\f]

@param src Coordinates of quadrangle vertices in the source image.
@param dst Coordinates of the corresponding quadrangle vertices in the destination image.
@param solveMethod method passed to cv::solve (#DecompTypes)

@sa  findHomography, warpPerspective, perspectiveTransform
 */
CV_EXPORTS_W Mat getPerspectiveTransform(InputArray src, InputArray dst, int solveMethod = DECOMP_LU);

/** @overload */
CV_EXPORTS Mat getPerspectiveTransform(const Point2f src[], const Point2f dst[], int solveMethod = DECOMP_LU);


CV_EXPORTS_W Mat getAffineTransform( InputArray src, InputArray dst );

/** @brief Retrieves a pixel rectangle from an image with sub-pixel accuracy.

The function getRectSubPix extracts pixels from src:

\f[patch(x, y) = src(x +  \texttt{center.x} - ( \texttt{dst.cols} -1)*0.5, y +  \texttt{center.y} - ( \texttt{dst.rows} -1)*0.5)\f]

where the values of the pixels at non-integer coordinates are retrieved using bilinear
interpolation. Every channel of multi-channel images is processed independently. Also
the image should be a single channel or three channel image. While the center of the
rectangle must be inside the image, parts of the rectangle may be outside.

@param image Source image.
@param patchSize Size of the extracted patch.
@param center Floating point coordinates of the center of the extracted rectangle within the
source image. The center must be inside the image.
@param patch Extracted patch that has the size patchSize and the same number of channels as src .
@param patchType Depth of the extracted pixels. By default, they have the same depth as src .

@sa  warpAffine, warpPerspective
 */
CV_EXPORTS_W void getRectSubPix( InputArray image, Size patchSize,
                                 Point2f center, OutputArray patch, int patchType = -1 );

/** @example samples/cpp/polar_transforms.cpp
An example using the cv::linearPolar and cv::logPolar operations
*/

/** @brief Remaps an image to semilog-polar coordinates space.

@deprecated This function produces same result as cv::warpPolar(src, dst, src.size(), center, maxRadius, flags+WARP_POLAR_LOG);

@internal
Transform the source image using the following transformation (See @ref polar_remaps_reference_image "Polar remaps reference image d)"):
\f[\begin{array}{l}
  dst( \rho , \phi ) = src(x,y) \\
  dst.size() \leftarrow src.size()
\end{array}\f]

where
\f[\begin{array}{l}
  I = (dx,dy) = (x - center.x,y - center.y) \\
  \rho = M \cdot log_e(\texttt{magnitude} (I)) ,\\
  \phi = Kangle \cdot \texttt{angle} (I) \\
\end{array}\f]

and
\f[\begin{array}{l}
  M = src.cols / log_e(maxRadius) \\
  Kangle = src.rows / 2\Pi \\
\end{array}\f]

The function emulates the human "foveal" vision and can be used for fast scale and
rotation-invariant template matching, for object tracking and so forth.
@param src Source image
@param dst Destination image. It will have same size and type as src.
@param center The transformation center; where the output precision is maximal
@param M Magnitude scale parameter. It determines the radius of the bounding circle to transform too.
@param flags A combination of interpolation methods, see #InterpolationFlags

@note
-   The function can not operate in-place.
-   To calculate magnitude and angle in degrees #cartToPolar is used internally thus angles are measured from 0 to 360 with accuracy about 0.3 degrees.

@sa cv::linearPolar
@endinternal
*/
CV_EXPORTS_W void logPolar( InputArray src, OutputArray dst,
                            Point2f center, double M, int flags );

/** @brief Remaps an image to polar coordinates space.

@deprecated This function produces same result as cv::warpPolar(src, dst, src.size(), center, maxRadius, flags)

@internal
Transform the source image using the following transformation (See @ref polar_remaps_reference_image "Polar remaps reference image c)"):
\f[\begin{array}{l}
  dst( \rho , \phi ) = src(x,y) \\
  dst.size() \leftarrow src.size()
\end{array}\f]

where
\f[\begin{array}{l}
  I = (dx,dy) = (x - center.x,y - center.y) \\
  \rho = Kmag \cdot \texttt{magnitude} (I) ,\\
  \phi = angle \cdot \texttt{angle} (I)
\end{array}\f]

and
\f[\begin{array}{l}
  Kx = src.cols / maxRadius \\
  Ky = src.rows / 2\Pi
\end{array}\f]


@param src Source image
@param dst Destination image. It will have same size and type as src.
@param center The transformation center;
@param maxRadius The radius of the bounding circle to transform. It determines the inverse magnitude scale parameter too.
@param flags A combination of interpolation methods, see #InterpolationFlags

@note
-   The function can not operate in-place.
-   To calculate magnitude and angle in degrees #cartToPolar is used internally thus angles are measured from 0 to 360 with accuracy about 0.3 degrees.

@sa cv::logPolar
@endinternal
*/
CV_EXPORTS_W void linearPolar( InputArray src, OutputArray dst,
                               Point2f center, double maxRadius, int flags );


/** \brief Remaps an image to polar or semilog-polar coordinates space

@anchor polar_remaps_reference_image
![Polar remaps reference](pics/polar_remap_doc.png)

Transform the source image using the following transformation:
\f[
dst(\rho , \phi ) = src(x,y)
\f]

where
\f[
\begin{array}{l}
\vec{I} = (x - center.x, \;y - center.y) \\
\phi = Kangle \cdot \texttt{angle} (\vec{I}) \\
\rho = \left\{\begin{matrix}
Klin \cdot \texttt{magnitude} (\vec{I}) & default \\
Klog \cdot log_e(\texttt{magnitude} (\vec{I})) & if \; semilog \\
\end{matrix}\right.
\end{array}
\f]

and
\f[
\begin{array}{l}
Kangle = dsize.height / 2\Pi \\
Klin = dsize.width / maxRadius \\
Klog = dsize.width / log_e(maxRadius) \\
\end{array}
\f]


\par Linear vs semilog mapping

Polar mapping can be linear or semi-log. Add one of #WarpPolarMode to `flags` to specify the polar mapping mode.

Linear is the default mode.

The semilog mapping emulates the human "foveal" vision that permit very high acuity on the line of sight (central vision)
in contrast to peripheral vision where acuity is minor.

\par Option on `dsize`:

- if both values in `dsize <=0 ` (default),
the destination image will have (almost) same area of source bounding circle:
\f[\begin{array}{l}
dsize.area  \leftarrow (maxRadius^2 \cdot \Pi) \\
dsize.width = \texttt{cvRound}(maxRadius) \\
dsize.height = \texttt{cvRound}(maxRadius \cdot \Pi) \\
\end{array}\f]


- if only `dsize.height <= 0`,
the destination image area will be proportional to the bounding circle area but scaled by `Kx * Kx`:
\f[\begin{array}{l}
dsize.height = \texttt{cvRound}(dsize.width \cdot \Pi) \\
\end{array}
\f]

- if both values in `dsize > 0 `,
the destination image will have the given size therefore the area of the bounding circle will be scaled to `dsize`.


\par Reverse mapping

You can get reverse mapping adding #WARP_INVERSE_MAP to `flags`
\snippet polar_transforms.cpp InverseMap

In addiction, to calculate the original coordinate from a polar mapped coordinate \f$(rho, phi)->(x, y)\f$:
\snippet polar_transforms.cpp InverseCoordinate

@param src Source image.
@param dst Destination image. It will have same type as src.
@param dsize The destination image size (see description for valid options).
@param center The transformation center.
@param maxRadius The radius of the bounding circle to transform. It determines the inverse magnitude scale parameter too.
@param flags A combination of interpolation methods, #InterpolationFlags + #WarpPolarMode.
            - Add #WARP_POLAR_LINEAR to select linear polar mapping (default)
            - Add #WARP_POLAR_LOG to select semilog polar mapping
            - Add #WARP_INVERSE_MAP for reverse mapping.
@note
-  The function can not operate in-place.
-  To calculate magnitude and angle in degrees #cartToPolar is used internally thus angles are measured from 0 to 360 with accuracy about 0.3 degrees.
-  This function uses #remap. Due to current implementation limitations the size of an input and output images should be less than 32767x32767.

@sa cv::remap
*/
CV_EXPORTS_W void warpPolar(InputArray src, OutputArray dst, Size dsize,
                            Point2f center, double maxRadius, int flags);


//! @} imgproc_transform

//! @addtogroup imgproc_misc
//! @{

/** @overload */
CV_EXPORTS_W void integral( InputArray src, OutputArray sum, int sdepth = -1 );

/** @overload */
CV_EXPORTS_AS(integral2) void integral( InputArray src, OutputArray sum,
                                        OutputArray sqsum, int sdepth = -1, int sqdepth = -1 );

/** @brief Calculates the integral of an image.

The function calculates one or more integral images for the source image as follows:

\f[\texttt{sum} (X,Y) =  \sum _{x<X,y<Y}  \texttt{image} (x,y)\f]

\f[\texttt{sqsum} (X,Y) =  \sum _{x<X,y<Y}  \texttt{image} (x,y)^2\f]

\f[\texttt{tilted} (X,Y) =  \sum _{y<Y,abs(x-X+1) \leq Y-y-1}  \texttt{image} (x,y)\f]

Using these integral images, you can calculate sum, mean, and standard deviation over a specific
up-right or rotated rectangular region of the image in a constant time, for example:

\f[\sum _{x_1 \leq x < x_2,  \, y_1  \leq y < y_2}  \texttt{image} (x,y) =  \texttt{sum} (x_2,y_2)- \texttt{sum} (x_1,y_2)- \texttt{sum} (x_2,y_1)+ \texttt{sum} (x_1,y_1)\f]

It makes possible to do a fast blurring or fast block correlation with a variable window size, for
example. In case of multi-channel images, sums for each channel are accumulated independently.

As a practical example, the next figure shows the calculation of the integral of a straight
rectangle Rect(3,3,3,2) and of a tilted rectangle Rect(5,1,2,3) . The selected pixels in the
original image are shown, as well as the relative pixels in the integral images sum and tilted .

![integral calculation example](pics/integral.png)

@param src input image as \f$W \times H\f$, 8-bit or floating-point (32f or 64f).
@param sum integral image as \f$(W+1)\times (H+1)\f$ , 32-bit integer or floating-point (32f or 64f).
@param sqsum integral image for squared pixel values; it is \f$(W+1)\times (H+1)\f$, double-precision
floating-point (64f) array.
@param tilted integral for the image rotated by 45 degrees; it is \f$(W+1)\times (H+1)\f$ array with
the same data type as sum.
@param sdepth desired depth of the integral and the tilted integral images, CV_32S, CV_32F, or
CV_64F.
@param sqdepth desired depth of the integral image of squared pixel values, CV_32F or CV_64F.
 */
CV_EXPORTS_AS(integral3) void integral( InputArray src, OutputArray sum,
                                        OutputArray sqsum, OutputArray tilted,
                                        int sdepth = -1, int sqdepth = -1 );

//! @} imgproc_misc

//! @addtogroup imgproc_motion
//! @{

/** @brief Adds an image to the accumulator image.

The function adds src or some of its elements to dst :

\f[\texttt{dst} (x,y)  \leftarrow \texttt{dst} (x,y) +  \texttt{src} (x,y)  \quad \text{if} \quad \texttt{mask} (x,y)  \ne 0\f]

The function supports multi-channel images. Each channel is processed independently.

The function cv::accumulate can be used, for example, to collect statistics of a scene background
viewed by a still camera and for the further foreground-background segmentation.

@param src Input image of type CV_8UC(n), CV_16UC(n), CV_32FC(n) or CV_64FC(n), where n is a positive integer.
@param dst %Accumulator image with the same number of channels as input image, and a depth of CV_32F or CV_64F.
@param mask Optional operation mask.

@sa  accumulateSquare, accumulateProduct, accumulateWeighted
 */
CV_EXPORTS_W void accumulate( InputArray src, InputOutputArray dst,
                              InputArray mask = noArray() );

/** @brief Adds the square of a source image to the accumulator image.

The function adds the input image src or its selected region, raised to a power of 2, to the
accumulator dst :

\f[\texttt{dst} (x,y)  \leftarrow \texttt{dst} (x,y) +  \texttt{src} (x,y)^2  \quad \text{if} \quad \texttt{mask} (x,y)  \ne 0\f]

The function supports multi-channel images. Each channel is processed independently.

@param src Input image as 1- or 3-channel, 8-bit or 32-bit floating point.
@param dst %Accumulator image with the same number of channels as input image, 32-bit or 64-bit
floating-point.
@param mask Optional operation mask.

@sa  accumulateSquare, accumulateProduct, accumulateWeighted
 */
CV_EXPORTS_W void accumulateSquare( InputArray src, InputOutputArray dst,
                                    InputArray mask = noArray() );

/** @brief Adds the per-element product of two input images to the accumulator image.

The function adds the product of two images or their selected regions to the accumulator dst :

\f[\texttt{dst} (x,y)  \leftarrow \texttt{dst} (x,y) +  \texttt{src1} (x,y)  \cdot \texttt{src2} (x,y)  \quad \text{if} \quad \texttt{mask} (x,y)  \ne 0\f]

The function supports multi-channel images. Each channel is processed independently.

@param src1 First input image, 1- or 3-channel, 8-bit or 32-bit floating point.
@param src2 Second input image of the same type and the same size as src1 .
@param dst %Accumulator image with the same number of channels as input images, 32-bit or 64-bit
floating-point.
@param mask Optional operation mask.

@sa  accumulate, accumulateSquare, accumulateWeighted
 */
CV_EXPORTS_W void accumulateProduct( InputArray src1, InputArray src2,
                                     InputOutputArray dst, InputArray mask=noArray() );

/** @brief Updates a running average.

The function calculates the weighted sum of the input image src and the accumulator dst so that dst
becomes a running average of a frame sequence:

\f[\texttt{dst} (x,y)  \leftarrow (1- \texttt{alpha} )  \cdot \texttt{dst} (x,y) +  \texttt{alpha} \cdot \texttt{src} (x,y)  \quad \text{if} \quad \texttt{mask} (x,y)  \ne 0\f]

That is, alpha regulates the update speed (how fast the accumulator "forgets" about earlier images).
The function supports multi-channel images. Each channel is processed independently.

@param src Input image as 1- or 3-channel, 8-bit or 32-bit floating point.
@param dst %Accumulator image with the same number of channels as input image, 32-bit or 64-bit
floating-point.
@param alpha Weight of the input image.
@param mask Optional operation mask.

@sa  accumulate, accumulateSquare, accumulateProduct
 */
CV_EXPORTS_W void accumulateWeighted( InputArray src, InputOutputArray dst,
                                      double alpha, InputArray mask = noArray() );

/** @brief The function is used to detect translational shifts that occur between two images.

The operation takes advantage of the Fourier shift theorem for detecting the translational shift in
the frequency domain. It can be used for fast image registration as well as motion estimation. For
more information please see <http://en.wikipedia.org/wiki/Phase_correlation>

Calculates the cross-power spectrum of two supplied source arrays. The arrays are padded if needed
with getOptimalDFTSize.

The function performs the following equations:
- First it applies a Hanning window (see <http://en.wikipedia.org/wiki/Hann_function>) to each
image to remove possible edge effects. This window is cached until the array size changes to speed
up processing time.
- Next it computes the forward DFTs of each source array:
\f[\mathbf{G}_a = \mathcal{F}\{src_1\}, \; \mathbf{G}_b = \mathcal{F}\{src_2\}\f]
where \f$\mathcal{F}\f$ is the forward DFT.
- It then computes the cross-power spectrum of each frequency domain array:
\f[R = \frac{ \mathbf{G}_a \mathbf{G}_b^*}{|\mathbf{G}_a \mathbf{G}_b^*|}\f]
- Next the cross-correlation is converted back into the time domain via the inverse DFT:
\f[r = \mathcal{F}^{-1}\{R\}\f]
- Finally, it computes the peak location and computes a 5x5 weighted centroid around the peak to
achieve sub-pixel accuracy.
\f[(\Delta x, \Delta y) = \texttt{weightedCentroid} \{\arg \max_{(x, y)}\{r\}\}\f]
- If non-zero, the response parameter is computed as the sum of the elements of r within the 5x5
centroid around the peak location. It is normalized to a maximum of 1 (meaning there is a single
peak) and will be smaller when there are multiple peaks.

@param src1 Source floating point array (CV_32FC1 or CV_64FC1)
@param src2 Source floating point array (CV_32FC1 or CV_64FC1)
@param window Floating point array with windowing coefficients to reduce edge effects (optional).
@param response Signal power within the 5x5 centroid around the peak, between 0 and 1 (optional).
@returns detected phase shift (sub-pixel) between the two arrays.

@sa dft, getOptimalDFTSize, idft, mulSpectrums createHanningWindow
 */
CV_EXPORTS_W Point2d phaseCorrelate(InputArray src1, InputArray src2,
                                    InputArray window = noArray(), CV_OUT double* response = 0);

/** @brief This function computes a Hanning window coefficients in two dimensions.

See (http://en.wikipedia.org/wiki/Hann_function) and (http://en.wikipedia.org/wiki/Window_function)
for more information.

An example is shown below:
@code
    // create hanning window of size 100x100 and type CV_32F
    Mat hann;
    createHanningWindow(hann, Size(100, 100), CV_32F);
@endcode
@param dst Destination array to place Hann coefficients in
@param winSize The window size specifications (both width and height must be > 1)
@param type Created array type
 */
CV_EXPORTS_W void createHanningWindow(OutputArray dst, Size winSize, int type);

//! @} imgproc_motion

//! @addtogroup imgproc_misc
//! @{

/** @brief Applies a fixed-level threshold to each array element.

The function applies fixed-level thresholding to a multiple-channel array. The function is typically
used to get a bi-level (binary) image out of a grayscale image ( #compare could be also used for
this purpose) or for removing a noise, that is, filtering out pixels with too small or too large
values. There are several types of thresholding supported by the function. They are determined by
type parameter.

Also, the special values #THRESH_OTSU or #THRESH_TRIANGLE may be combined with one of the
above values. In these cases, the function determines the optimal threshold value using the Otsu's
or Triangle algorithm and uses it instead of the specified thresh.

@note Currently, the Otsu's and Triangle methods are implemented only for 8-bit single-channel images.

@param src input array (multiple-channel, 8-bit or 32-bit floating point).
@param dst output array of the same size  and type and the same number of channels as src.
@param thresh threshold value.
@param maxval maximum value to use with the #THRESH_BINARY and #THRESH_BINARY_INV thresholding
types.
@param type thresholding type (see #ThresholdTypes).
@return the computed threshold value if Otsu's or Triangle methods used.

@sa  adaptiveThreshold, findContours, compare, min, max
 */
CV_EXPORTS_W double threshold( InputArray src, OutputArray dst,
                               double thresh, double maxval, int type );


/** @brief Applies an adaptive threshold to an array.

The function transforms a grayscale image to a binary image according to the formulae:
-   **THRESH_BINARY**
    \f[dst(x,y) =  \fork{\texttt{maxValue}}{if \(src(x,y) > T(x,y)\)}{0}{otherwise}\f]
-   **THRESH_BINARY_INV**
    \f[dst(x,y) =  \fork{0}{if \(src(x,y) > T(x,y)\)}{\texttt{maxValue}}{otherwise}\f]
where \f$T(x,y)\f$ is a threshold calculated individually for each pixel (see adaptiveMethod parameter).

The function can process the image in-place.

@param src Source 8-bit single-channel image.
@param dst Destination image of the same size and the same type as src.
@param maxValue Non-zero value assigned to the pixels for which the condition is satisfied
@param adaptiveMethod Adaptive thresholding algorithm to use, see #AdaptiveThresholdTypes.
The #BORDER_REPLICATE | #BORDER_ISOLATED is used to process boundaries.
@param thresholdType Thresholding type that must be either #THRESH_BINARY or #THRESH_BINARY_INV,
see #ThresholdTypes.
@param blockSize Size of a pixel neighborhood that is used to calculate a threshold value for the
pixel: 3, 5, 7, and so on.
@param C Constant subtracted from the mean or weighted mean (see the details below). Normally, it
is positive but may be zero or negative as well.

@sa  threshold, blur, GaussianBlur
 */
CV_EXPORTS_W void adaptiveThreshold( InputArray src, OutputArray dst,
                                     double maxValue, int adaptiveMethod,
                                     int thresholdType, int blockSize, double C );

//! @} imgproc_misc

//! @addtogroup imgproc_filter
//! @{

/** @example samples/cpp/tutorial_code/ImgProc/Pyramids/Pyramids.cpp
An example using pyrDown and pyrUp functions
*/

/** @brief Blurs an image and downsamples it.

By default, size of the output image is computed as `Size((src.cols+1)/2, (src.rows+1)/2)`, but in
any case, the following conditions should be satisfied:

\f[\begin{array}{l} | \texttt{dstsize.width} *2-src.cols| \leq 2 \\ | \texttt{dstsize.height} *2-src.rows| \leq 2 \end{array}\f]

The function performs the downsampling step of the Gaussian pyramid construction. First, it
convolves the source image with the kernel:

\f[\frac{1}{256} \begin{bmatrix} 1 & 4 & 6 & 4 & 1  \\ 4 & 16 & 24 & 16 & 4  \\ 6 & 24 & 36 & 24 & 6  \\ 4 & 16 & 24 & 16 & 4  \\ 1 & 4 & 6 & 4 & 1 \end{bmatrix}\f]

Then, it downsamples the image by rejecting even rows and columns.

@param src input image.
@param dst output image; it has the specified size and the same type as src.
@param dstsize size of the output image.
@param borderType Pixel extrapolation method, see #BorderTypes (#BORDER_CONSTANT isn't supported)
 */
CV_EXPORTS_W void pyrDown( InputArray src, OutputArray dst,
                           const Size& dstsize = Size(), int borderType = BORDER_DEFAULT );

/** @brief Upsamples an image and then blurs it.

By default, size of the output image is computed as `Size(src.cols\*2, (src.rows\*2)`, but in any
case, the following conditions should be satisfied:

\f[\begin{array}{l} | \texttt{dstsize.width} -src.cols*2| \leq  ( \texttt{dstsize.width}   \mod  2)  \\ | \texttt{dstsize.height} -src.rows*2| \leq  ( \texttt{dstsize.height}   \mod  2) \end{array}\f]

The function performs the upsampling step of the Gaussian pyramid construction, though it can
actually be used to construct the Laplacian pyramid. First, it upsamples the source image by
injecting even zero rows and columns and then convolves the result with the same kernel as in
pyrDown multiplied by 4.

@param src input image.
@param dst output image. It has the specified size and the same type as src .
@param dstsize size of the output image.
@param borderType Pixel extrapolation method, see #BorderTypes (only #BORDER_DEFAULT is supported)
 */
CV_EXPORTS_W void pyrUp( InputArray src, OutputArray dst,
                         const Size& dstsize = Size(), int borderType = BORDER_DEFAULT );

/** @brief Constructs the Gaussian pyramid for an image.

The function constructs a vector of images and builds the Gaussian pyramid by recursively applying
pyrDown to the previously built pyramid layers, starting from `dst[0]==src`.

@param src Source image. Check pyrDown for the list of supported types.
@param dst Destination vector of maxlevel+1 images of the same type as src. dst[0] will be the
same as src. dst[1] is the next pyramid layer, a smoothed and down-sized src, and so on.
@param maxlevel 0-based index of the last (the smallest) pyramid layer. It must be non-negative.
@param borderType Pixel extrapolation method, see #BorderTypes (#BORDER_CONSTANT isn't supported)
 */
CV_EXPORTS void buildPyramid( InputArray src, OutputArrayOfArrays dst,
                              int maxlevel, int borderType = BORDER_DEFAULT );

//! @} imgproc_filter

//! @addtogroup imgproc_hist
//! @{

/** @example samples/cpp/demhist.cpp
An example for creating histograms of an image
*/

/** @brief Calculates a histogram of a set of arrays.

The function cv::calcHist calculates the histogram of one or more arrays. The elements of a tuple used
to increment a histogram bin are taken from the corresponding input arrays at the same location. The
sample below shows how to compute a 2D Hue-Saturation histogram for a color image. :
@include snippets/imgproc_calcHist.cpp

@param images Source arrays. They all should have the same depth, CV_8U, CV_16U or CV_32F , and the same
size. Each of them can have an arbitrary number of channels.
@param nimages Number of source images.
@param channels List of the dims channels used to compute the histogram. The first array channels
are numerated from 0 to images[0].channels()-1 , the second array channels are counted from
images[0].channels() to images[0].channels() + images[1].channels()-1, and so on.
@param mask Optional mask. If the matrix is not empty, it must be an 8-bit array of the same size
as images[i] . The non-zero mask elements mark the array elements counted in the histogram.
@param hist Output histogram, which is a dense or sparse dims -dimensional array.
@param dims Histogram dimensionality that must be positive and not greater than CV_MAX_DIMS
(equal to 32 in the current OpenCV version).
@param histSize Array of histogram sizes in each dimension.
@param ranges Array of the dims arrays of the histogram bin boundaries in each dimension. When the
histogram is uniform ( uniform =true), then for each dimension i it is enough to specify the lower
(inclusive) boundary \f$L_0\f$ of the 0-th histogram bin and the upper (exclusive) boundary
\f$U_{\texttt{histSize}[i]-1}\f$ for the last histogram bin histSize[i]-1 . That is, in case of a
uniform histogram each of ranges[i] is an array of 2 elements. When the histogram is not uniform (
uniform=false ), then each of ranges[i] contains histSize[i]+1 elements:
\f$L_0, U_0=L_1, U_1=L_2, ..., U_{\texttt{histSize[i]}-2}=L_{\texttt{histSize[i]}-1}, U_{\texttt{histSize[i]}-1}\f$
. The array elements, that are not between \f$L_0\f$ and \f$U_{\texttt{histSize[i]}-1}\f$ , are not
counted in the histogram.
@param uniform Flag indicating whether the histogram is uniform or not (see above).
@param accumulate Accumulation flag. If it is set, the histogram is not cleared in the beginning
when it is allocated. This feature enables you to compute a single histogram from several sets of
arrays, or to update the histogram in time.
*/
CV_EXPORTS void calcHist( const Mat* images, int nimages,
                          const int* channels, InputArray mask,
                          OutputArray hist, int dims, const int* histSize,
                          const float** ranges, bool uniform = true, bool accumulate = false );

/** @overload

this variant uses %SparseMat for output
*/
CV_EXPORTS void calcHist( const Mat* images, int nimages,
                          const int* channels, InputArray mask,
                          SparseMat& hist, int dims,
                          const int* histSize, const float** ranges,
                          bool uniform = true, bool accumulate = false );

/** @overload */
CV_EXPORTS_W void calcHist( InputArrayOfArrays images,
                            const std::vector<int>& channels,
                            InputArray mask, OutputArray hist,
                            const std::vector<int>& histSize,
                            const std::vector<float>& ranges,
                            bool accumulate = false );

/** @brief Calculates the back projection of a histogram.

The function cv::calcBackProject calculates the back project of the histogram. That is, similarly to
#calcHist , at each location (x, y) the function collects the values from the selected channels
in the input images and finds the corresponding histogram bin. But instead of incrementing it, the
function reads the bin value, scales it by scale , and stores in backProject(x,y) . In terms of
statistics, the function computes probability of each element value in respect with the empirical
probability distribution represented by the histogram. See how, for example, you can find and track
a bright-colored object in a scene:

- Before tracking, show the object to the camera so that it covers almost the whole frame.
Calculate a hue histogram. The histogram may have strong maximums, corresponding to the dominant
colors in the object.

- When tracking, calculate a back projection of a hue plane of each input video frame using that
pre-computed histogram. Threshold the back projection to suppress weak colors. It may also make
sense to suppress pixels with non-sufficient color saturation and too dark or too bright pixels.

- Find connected components in the resulting picture and choose, for example, the largest
component.

This is an approximate algorithm of the CamShift color object tracker.

@param images Source arrays. They all should have the same depth, CV_8U, CV_16U or CV_32F , and the same
size. Each of them can have an arbitrary number of channels.
@param nimages Number of source images.
@param channels The list of channels used to compute the back projection. The number of channels
must match the histogram dimensionality. The first array channels are numerated from 0 to
images[0].channels()-1 , the second array channels are counted from images[0].channels() to
images[0].channels() + images[1].channels()-1, and so on.
@param hist Input histogram that can be dense or sparse.
@param backProject Destination back projection array that is a single-channel array of the same
size and depth as images[0] .
@param ranges Array of arrays of the histogram bin boundaries in each dimension. See #calcHist .
@param scale Optional scale factor for the output back projection.
@param uniform Flag indicating whether the histogram is uniform or not (see above).

@sa calcHist, compareHist
 */
CV_EXPORTS void calcBackProject( const Mat* images, int nimages,
                                 const int* channels, InputArray hist,
                                 OutputArray backProject, const float** ranges,
                                 double scale = 1, bool uniform = true );

/** @overload */
CV_EXPORTS void calcBackProject( const Mat* images, int nimages,
                                 const int* channels, const SparseMat& hist,
                                 OutputArray backProject, const float** ranges,
                                 double scale = 1, bool uniform = true );

/** @overload */
CV_EXPORTS_W void calcBackProject( InputArrayOfArrays images, const std::vector<int>& channels,
                                   InputArray hist, OutputArray dst,
                                   const std::vector<float>& ranges,
                                   double scale );

/** @brief Compares two histograms.

The function cv::compareHist compares two dense or two sparse histograms using the specified method.

The function returns \f$d(H_1, H_2)\f$ .

While the function works well with 1-, 2-, 3-dimensional dense histograms, it may not be suitable
for high-dimensional sparse histograms. In such histograms, because of aliasing and sampling
problems, the coordinates of non-zero histogram bins can slightly shift. To compare such histograms
or more general sparse configurations of weighted points, consider using the #EMD function.

@param H1 First compared histogram.
@param H2 Second compared histogram of the same size as H1 .
@param method Comparison method, see #HistCompMethods
 */
CV_EXPORTS_W double compareHist( InputArray H1, InputArray H2, int method );

/** @overload */
CV_EXPORTS double compareHist( const SparseMat& H1, const SparseMat& H2, int method );

/** @brief Equalizes the histogram of a grayscale image.

The function equalizes the histogram of the input image using the following algorithm:

- Calculate the histogram \f$H\f$ for src .
- Normalize the histogram so that the sum of histogram bins is 255.
- Compute the integral of the histogram:
\f[H'_i =  \sum _{0  \le j < i} H(j)\f]
- Transform the image using \f$H'\f$ as a look-up table: \f$\texttt{dst}(x,y) = H'(\texttt{src}(x,y))\f$

The algorithm normalizes the brightness and increases the contrast of the image.

@param src Source 8-bit single channel image.
@param dst Destination image of the same size and type as src .
 */
CV_EXPORTS_W void equalizeHist( InputArray src, OutputArray dst );

/** @brief Creates a smart pointer to a cv::CLAHE class and initializes it.

@param clipLimit Threshold for contrast limiting.
@param tileGridSize Size of grid for histogram equalization. Input image will be divided into
equally sized rectangular tiles. tileGridSize defines the number of tiles in row and column.
 */
CV_EXPORTS_W Ptr<CLAHE> createCLAHE(double clipLimit = 40.0, Size tileGridSize = Size(8, 8));

/** @brief Computes the "minimal work" distance between two weighted point configurations.

The function computes the earth mover distance and/or a lower boundary of the distance between the
two weighted point configurations. One of the applications described in @cite RubnerSept98,
@cite Rubner2000 is multi-dimensional histogram comparison for image retrieval. EMD is a transportation
problem that is solved using some modification of a simplex algorithm, thus the complexity is
exponential in the worst case, though, on average it is much faster. In the case of a real metric
the lower boundary can be calculated even faster (using linear-time algorithm) and it can be used
to determine roughly whether the two signatures are far enough so that they cannot relate to the
same object.

@param signature1 First signature, a \f$\texttt{size1}\times \texttt{dims}+1\f$ floating-point matrix.
Each row stores the point weight followed by the point coordinates. The matrix is allowed to have
a single column (weights only) if the user-defined cost matrix is used. The weights must be
non-negative and have at least one non-zero value.
@param signature2 Second signature of the same format as signature1 , though the number of rows
may be different. The total weights may be different. In this case an extra "dummy" point is added
to either signature1 or signature2. The weights must be non-negative and have at least one non-zero
value.
@param distType Used metric. See #DistanceTypes.
@param cost User-defined \f$\texttt{size1}\times \texttt{size2}\f$ cost matrix. Also, if a cost matrix
is used, lower boundary lowerBound cannot be calculated because it needs a metric function.
@param lowerBound Optional input/output parameter: lower boundary of a distance between the two
signatures that is a distance between mass centers. The lower boundary may not be calculated if
the user-defined cost matrix is used, the total weights of point configurations are not equal, or
if the signatures consist of weights only (the signature matrices have a single column). You
**must** initialize \*lowerBound . If the calculated distance between mass centers is greater or
equal to \*lowerBound (it means that the signatures are far enough), the function does not
calculate EMD. In any case \*lowerBound is set to the calculated distance between mass centers on
return. Thus, if you want to calculate both distance between mass centers and EMD, \*lowerBound
should be set to 0.
@param flow Resultant \f$\texttt{size1} \times \texttt{size2}\f$ flow matrix: \f$\texttt{flow}_{i,j}\f$ is
a flow from \f$i\f$ -th point of signature1 to \f$j\f$ -th point of signature2 .
 */
CV_EXPORTS float EMD( InputArray signature1, InputArray signature2,
                      int distType, InputArray cost=noArray(),
                      float* lowerBound = 0, OutputArray flow = noArray() );

CV_EXPORTS_AS(EMD) float wrapperEMD( InputArray signature1, InputArray signature2,
                      int distType, InputArray cost=noArray(),
                      CV_IN_OUT Ptr<float> lowerBound = Ptr<float>(), OutputArray flow = noArray() );

//! @} imgproc_hist

//! @addtogroup imgproc_segmentation
//! @{

/** @example samples/cpp/watershed.cpp
An example using the watershed algorithm
*/

/** @brief Performs a marker-based image segmentation using the watershed algorithm.

The function implements one of the variants of watershed, non-parametric marker-based segmentation
algorithm, described in @cite Meyer92 .

Before passing the image to the function, you have to roughly outline the desired regions in the
image markers with positive (\>0) indices. So, every region is represented as one or more connected
components with the pixel values 1, 2, 3, and so on. Such markers can be retrieved from a binary
mask using #findContours and #drawContours (see the watershed.cpp demo). The markers are "seeds" of
the future image regions. All the other pixels in markers , whose relation to the outlined regions
is not known and should be defined by the algorithm, should be set to 0's. In the function output,
each pixel in markers is set to a value of the "seed" components or to -1 at boundaries between the
regions.

@note Any two neighbor connected components are not necessarily separated by a watershed boundary
(-1's pixels); for example, they can touch each other in the initial marker image passed to the
function.

@param image Input 8-bit 3-channel image.
@param markers Input/output 32-bit single-channel image (map) of markers. It should have the same
size as image .

@sa findContours
 */
CV_EXPORTS_W void watershed( InputArray image, InputOutputArray markers );

//! @} imgproc_segmentation

//! @addtogroup imgproc_filter
//! @{

/** @brief Performs initial step of meanshift segmentation of an image.

The function implements the filtering stage of meanshift segmentation, that is, the output of the
function is the filtered "posterized" image with color gradients and fine-grain texture flattened.
At every pixel (X,Y) of the input image (or down-sized input image, see below) the function executes
meanshift iterations, that is, the pixel (X,Y) neighborhood in the joint space-color hyperspace is
considered:

\f[(x,y): X- \texttt{sp} \le x  \le X+ \texttt{sp} , Y- \texttt{sp} \le y  \le Y+ \texttt{sp} , ||(R,G,B)-(r,g,b)||   \le \texttt{sr}\f]

where (R,G,B) and (r,g,b) are the vectors of color components at (X,Y) and (x,y), respectively
(though, the algorithm does not depend on the color space used, so any 3-component color space can
be used instead). Over the neighborhood the average spatial value (X',Y') and average color vector
(R',G',B') are found and they act as the neighborhood center on the next iteration:

\f[(X,Y)~(X',Y'), (R,G,B)~(R',G',B').\f]

After the iterations over, the color components of the initial pixel (that is, the pixel from where
the iterations started) are set to the final value (average color at the last iteration):

\f[I(X,Y) <- (R*,G*,B*)\f]

When maxLevel \> 0, the gaussian pyramid of maxLevel+1 levels is built, and the above procedure is
run on the smallest layer first. After that, the results are propagated to the larger layer and the
iterations are run again only on those pixels where the layer colors differ by more than sr from the
lower-resolution layer of the pyramid. That makes boundaries of color regions sharper. Note that the
results will be actually different from the ones obtained by running the meanshift procedure on the
whole original image (i.e. when maxLevel==0).

@param src The source 8-bit, 3-channel image.
@param dst The destination image of the same format and the same size as the source.
@param sp The spatial window radius.
@param sr The color window radius.
@param maxLevel Maximum level of the pyramid for the segmentation.
@param termcrit Termination criteria: when to stop meanshift iterations.
 */
CV_EXPORTS_W void pyrMeanShiftFiltering( InputArray src, OutputArray dst,
                                         double sp, double sr, int maxLevel = 1,
                                         TermCriteria termcrit=TermCriteria(TermCriteria::MAX_ITER+TermCriteria::EPS,5,1) );

//! @}

//! @addtogroup imgproc_segmentation
//! @{

/** @example samples/cpp/grabcut.cpp
An example using the GrabCut algorithm
![Sample Screenshot](grabcut_output1.jpg)
*/

/** @brief Runs the GrabCut algorithm.

The function implements the [GrabCut image segmentation algorithm](http://en.wikipedia.org/wiki/GrabCut).

@param img Input 8-bit 3-channel image.
@param mask Input/output 8-bit single-channel mask. The mask is initialized by the function when
mode is set to #GC_INIT_WITH_RECT. Its elements may have one of the #GrabCutClasses.
@param rect ROI containing a segmented object. The pixels outside of the ROI are marked as
"obvious background". The parameter is only used when mode==#GC_INIT_WITH_RECT .
@param bgdModel Temporary array for the background model. Do not modify it while you are
processing the same image.
@param fgdModel Temporary arrays for the foreground model. Do not modify it while you are
processing the same image.
@param iterCount Number of iterations the algorithm should make before returning the result. Note
that the result can be refined with further calls with mode==#GC_INIT_WITH_MASK or
mode==GC_EVAL .
@param mode Operation mode that could be one of the #GrabCutModes
 */
CV_EXPORTS_W void grabCut( InputArray img, InputOutputArray mask, Rect rect,
                           InputOutputArray bgdModel, InputOutputArray fgdModel,
                           int iterCount, int mode = GC_EVAL );

//! @} imgproc_segmentation

//! @addtogroup imgproc_misc
//! @{

/** @example samples/cpp/distrans.cpp
An example on using the distance transform
*/

/** @brief Calculates the distance to the closest zero pixel for each pixel of the source image.

The function cv::distanceTransform calculates the approximate or precise distance from every binary
image pixel to the nearest zero pixel. For zero image pixels, the distance will obviously be zero.

When maskSize == #DIST_MASK_PRECISE and distanceType == #DIST_L2 , the function runs the
algorithm described in @cite Felzenszwalb04 . This algorithm is parallelized with the TBB library.

In other cases, the algorithm @cite Borgefors86 is used. This means that for a pixel the function
finds the shortest path to the nearest zero pixel consisting of basic shifts: horizontal, vertical,
diagonal, or knight's move (the latest is available for a \f$5\times 5\f$ mask). The overall
distance is calculated as a sum of these basic distances. Since the distance function should be
symmetric, all of the horizontal and vertical shifts must have the same cost (denoted as a ), all
the diagonal shifts must have the same cost (denoted as `b`), and all knight's moves must have the
same cost (denoted as `c`). For the #DIST_C and #DIST_L1 types, the distance is calculated
precisely, whereas for #DIST_L2 (Euclidean distance) the distance can be calculated only with a
relative error (a \f$5\times 5\f$ mask gives more accurate results). For `a`,`b`, and `c`, OpenCV
uses the values suggested in the original paper:
- DIST_L1: `a = 1, b = 2`
- DIST_L2:
    - `3 x 3`: `a=0.955, b=1.3693`
    - `5 x 5`: `a=1, b=1.4, c=2.1969`
- DIST_C: `a = 1, b = 1`

Typically, for a fast, coarse distance estimation #DIST_L2, a \f$3\times 3\f$ mask is used. For a
more accurate distance estimation #DIST_L2, a \f$5\times 5\f$ mask or the precise algorithm is used.
Note that both the precise and the approximate algorithms are linear on the number of pixels.

This variant of the function does not only compute the minimum distance for each pixel \f$(x, y)\f$
but also identifies the nearest connected component consisting of zero pixels
(labelType==#DIST_LABEL_CCOMP) or the nearest zero pixel (labelType==#DIST_LABEL_PIXEL). Index of the
component/pixel is stored in `labels(x, y)`. When labelType==#DIST_LABEL_CCOMP, the function
automatically finds connected components of zero pixels in the input image and marks them with
distinct labels. When labelType==#DIST_LABEL_PIXEL, the function scans through the input image and
marks all the zero pixels with distinct labels.

In this mode, the complexity is still linear. That is, the function provides a very fast way to
compute the Voronoi diagram for a binary image. Currently, the second variant can use only the
approximate distance transform algorithm, i.e. maskSize=#DIST_MASK_PRECISE is not supported
yet.

@param src 8-bit, single-channel (binary) source image.
@param dst Output image with calculated distances. It is a 8-bit or 32-bit floating-point,
single-channel image of the same size as src.
@param labels Output 2D array of labels (the discrete Voronoi diagram). It has the type
CV_32SC1 and the same size as src.
@param distanceType Type of distance, see #DistanceTypes
@param maskSize Size of the distance transform mask, see #DistanceTransformMasks.
#DIST_MASK_PRECISE is not supported by this variant. In case of the #DIST_L1 or #DIST_C distance type,
the parameter is forced to 3 because a \f$3\times 3\f$ mask gives the same result as \f$5\times
5\f$ or any larger aperture.
@param labelType Type of the label array to build, see #DistanceTransformLabelTypes.
 */
CV_EXPORTS_AS(distanceTransformWithLabels) void distanceTransform( InputArray src, OutputArray dst,
                                     OutputArray labels, int distanceType, int maskSize,
                                     int labelType = DIST_LABEL_CCOMP );

/** @overload
@param src 8-bit, single-channel (binary) source image.
@param dst Output image with calculated distances. It is a 8-bit or 32-bit floating-point,
single-channel image of the same size as src .
@param distanceType Type of distance, see #DistanceTypes
@param maskSize Size of the distance transform mask, see #DistanceTransformMasks. In case of the
#DIST_L1 or #DIST_C distance type, the parameter is forced to 3 because a \f$3\times 3\f$ mask gives
the same result as \f$5\times 5\f$ or any larger aperture.
@param dstType Type of output image. It can be CV_8U or CV_32F. Type CV_8U can be used only for
the first variant of the function and distanceType == #DIST_L1.
*/
CV_EXPORTS_W void distanceTransform( InputArray src, OutputArray dst,
                                     int distanceType, int maskSize, int dstType=CV_32F);

/** @example samples/cpp/ffilldemo.cpp
An example using the FloodFill technique
*/

/** @overload

variant without `mask` parameter
*/
CV_EXPORTS int floodFill( InputOutputArray image,
                          Point seedPoint, Scalar newVal, CV_OUT Rect* rect = 0,
                          Scalar loDiff = Scalar(), Scalar upDiff = Scalar(),
                          int flags = 4 );

/** @brief Fills a connected component with the given color.

The function cv::floodFill fills a connected component starting from the seed point with the specified
color. The connectivity is determined by the color/brightness closeness of the neighbor pixels. The
pixel at \f$(x,y)\f$ is considered to belong to the repainted domain if:

- in case of a grayscale image and floating range
\f[\texttt{src} (x',y')- \texttt{loDiff} \leq \texttt{src} (x,y)  \leq \texttt{src} (x',y')+ \texttt{upDiff}\f]


- in case of a grayscale image and fixed range
\f[\texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)- \texttt{loDiff} \leq \texttt{src} (x,y)  \leq \texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)+ \texttt{upDiff}\f]


- in case of a color image and floating range
\f[\texttt{src} (x',y')_r- \texttt{loDiff} _r \leq \texttt{src} (x,y)_r \leq \texttt{src} (x',y')_r+ \texttt{upDiff} _r,\f]
\f[\texttt{src} (x',y')_g- \texttt{loDiff} _g \leq \texttt{src} (x,y)_g \leq \texttt{src} (x',y')_g+ \texttt{upDiff} _g\f]
and
\f[\texttt{src} (x',y')_b- \texttt{loDiff} _b \leq \texttt{src} (x,y)_b \leq \texttt{src} (x',y')_b+ \texttt{upDiff} _b\f]


- in case of a color image and fixed range
\f[\texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_r- \texttt{loDiff} _r \leq \texttt{src} (x,y)_r \leq \texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_r+ \texttt{upDiff} _r,\f]
\f[\texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_g- \texttt{loDiff} _g \leq \texttt{src} (x,y)_g \leq \texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_g+ \texttt{upDiff} _g\f]
and
\f[\texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_b- \texttt{loDiff} _b \leq \texttt{src} (x,y)_b \leq \texttt{src} ( \texttt{seedPoint} .x, \texttt{seedPoint} .y)_b+ \texttt{upDiff} _b\f]


where \f$src(x',y')\f$ is the value of one of pixel neighbors that is already known to belong to the
component. That is, to be added to the connected component, a color/brightness of the pixel should
be close enough to:
- Color/brightness of one of its neighbors that already belong to the connected component in case
of a floating range.
- Color/brightness of the seed point in case of a fixed range.

Use these functions to either mark a connected component with the specified color in-place, or build
a mask and then extract the contour, or copy the region to another image, and so on.

@param image Input/output 1- or 3-channel, 8-bit, or floating-point image. It is modified by the
function unless the #FLOODFILL_MASK_ONLY flag is set in the second variant of the function. See
the details below.
@param mask Operation mask that should be a single-channel 8-bit image, 2 pixels wider and 2 pixels
taller than image. Since this is both an input and output parameter, you must take responsibility
of initializing it. Flood-filling cannot go across non-zero pixels in the input mask. For example,
an edge detector output can be used as a mask to stop filling at edges. On output, pixels in the
mask corresponding to filled pixels in the image are set to 1 or to the a value specified in flags
as described below. Additionally, the function fills the border of the mask with ones to simplify
internal processing. It is therefore possible to use the same mask in multiple calls to the function
to make sure the filled areas do not overlap.
@param seedPoint Starting point.
@param newVal New value of the repainted domain pixels.
@param loDiff Maximal lower brightness/color difference between the currently observed pixel and
one of its neighbors belonging to the component, or a seed pixel being added to the component.
@param upDiff Maximal upper brightness/color difference between the currently observed pixel and
one of its neighbors belonging to the component, or a seed pixel being added to the component.
@param rect Optional output parameter set by the function to the minimum bounding rectangle of the
repainted domain.
@param flags Operation flags. The first 8 bits contain a connectivity value. The default value of
4 means that only the four nearest neighbor pixels (those that share an edge) are considered. A
connectivity value of 8 means that the eight nearest neighbor pixels (those that share a corner)
will be considered. The next 8 bits (8-16) contain a value between 1 and 255 with which to fill
the mask (the default value is 1). For example, 4 | ( 255 \<\< 8 ) will consider 4 nearest
neighbours and fill the mask with a value of 255. The following additional options occupy higher
bits and therefore may be further combined with the connectivity and mask fill values using
bit-wise or (|), see #FloodFillFlags.

@note Since the mask is larger than the filled image, a pixel \f$(x, y)\f$ in image corresponds to the
pixel \f$(x+1, y+1)\f$ in the mask .

@sa findContours
 */
CV_EXPORTS_W int floodFill( InputOutputArray image, InputOutputArray mask,
                            Point seedPoint, Scalar newVal, CV_OUT Rect* rect=0,
                            Scalar loDiff = Scalar(), Scalar upDiff = Scalar(),
                            int flags = 4 );

//! Performs linear blending of two images:
//! \f[ \texttt{dst}(i,j) = \texttt{weights1}(i,j)*\texttt{src1}(i,j) + \texttt{weights2}(i,j)*\texttt{src2}(i,j) \f]
//! @param src1 It has a type of CV_8UC(n) or CV_32FC(n), where n is a positive integer.
//! @param src2 It has the same type and size as src1.
//! @param weights1 It has a type of CV_32FC1 and the same size with src1.
//! @param weights2 It has a type of CV_32FC1 and the same size with src1.
//! @param dst It is created if it does not have the same size and type with src1.
CV_EXPORTS void blendLinear(InputArray src1, InputArray src2, InputArray weights1, InputArray weights2, OutputArray dst);

//! @} imgproc_misc

//! @addtogroup imgproc_color_conversions
//! @{

/** @brief Converts an image from one color space to another.

The function converts an input image from one color space to another. In case of a transformation
to-from RGB color space, the order of the channels should be specified explicitly (RGB or BGR). Note
that the default color format in OpenCV is often referred to as RGB but it is actually BGR (the
bytes are reversed). So the first byte in a standard (24-bit) color image will be an 8-bit Blue
component, the second byte will be Green, and the third byte will be Red. The fourth, fifth, and
sixth bytes would then be the second pixel (Blue, then Green, then Red), and so on.

The conventional ranges for R, G, and B channel values are:
-   0 to 255 for CV_8U images
-   0 to 65535 for CV_16U images
-   0 to 1 for CV_32F images

In case of linear transformations, the range does not matter. But in case of a non-linear
transformation, an input RGB image should be normalized to the proper value range to get the correct
results, for example, for RGB \f$\rightarrow\f$ L\*u\*v\* transformation. For example, if you have a
32-bit floating-point image directly converted from an 8-bit image without any scaling, then it will
have the 0..255 value range instead of 0..1 assumed by the function. So, before calling #cvtColor ,
you need first to scale the image down:
@code
    img *= 1./255;
    cvtColor(img, img, COLOR_BGR2Luv);
@endcode
If you use #cvtColor with 8-bit images, the conversion will have some information lost. For many
applications, this will not be noticeable but it is recommended to use 32-bit images in applications
that need the full range of colors or that convert an image before an operation and then convert
back.

If conversion adds the alpha channel, its value will set to the maximum of corresponding channel
range: 255 for CV_8U, 65535 for CV_16U, 1 for CV_32F.

@param src input image: 8-bit unsigned, 16-bit unsigned ( CV_16UC... ), or single-precision
floating-point.
@param dst output image of the same size and depth as src.
@param code color space conversion code (see #ColorConversionCodes).
@param dstCn number of channels in the destination image; if the parameter is 0, the number of the
channels is derived automatically from src and code.

@see @ref imgproc_color_conversions
 */
CV_EXPORTS_W void cvtColor( InputArray src, OutputArray dst, int code, int dstCn = 0 );

/** @brief Converts an image from one color space to another where the source image is
stored in two planes.

This function only supports YUV420 to RGB conversion as of now.

@param src1: 8-bit image (#CV_8U) of the Y plane.
@param src2: image containing interleaved U/V plane.
@param dst: output image.
@param code: Specifies the type of conversion. It can take any of the following values:
- #COLOR_YUV2BGR_NV12
- #COLOR_YUV2RGB_NV12
- #COLOR_YUV2BGRA_NV12
- #COLOR_YUV2RGBA_NV12
- #COLOR_YUV2BGR_NV21
- #COLOR_YUV2RGB_NV21
- #COLOR_YUV2BGRA_NV21
- #COLOR_YUV2RGBA_NV21
*/
CV_EXPORTS_W void cvtColorTwoPlane( InputArray src1, InputArray src2, OutputArray dst, int code );

/** @brief main function for all demosaicing processes

@param src input image: 8-bit unsigned or 16-bit unsigned.
@param dst output image of the same size and depth as src.
@param code Color space conversion code (see the description below).
@param dstCn number of channels in the destination image; if the parameter is 0, the number of the
channels is derived automatically from src and code.

The function can do the following transformations:

-   Demosaicing using bilinear interpolation

    #COLOR_BayerBG2BGR , #COLOR_BayerGB2BGR , #COLOR_BayerRG2BGR , #COLOR_BayerGR2BGR

    #COLOR_BayerBG2GRAY , #COLOR_BayerGB2GRAY , #COLOR_BayerRG2GRAY , #COLOR_BayerGR2GRAY

-   Demosaicing using Variable Number of Gradients.

    #COLOR_BayerBG2BGR_VNG , #COLOR_BayerGB2BGR_VNG , #COLOR_BayerRG2BGR_VNG , #COLOR_BayerGR2BGR_VNG

-   Edge-Aware Demosaicing.

    #COLOR_BayerBG2BGR_EA , #COLOR_BayerGB2BGR_EA , #COLOR_BayerRG2BGR_EA , #COLOR_BayerGR2BGR_EA

-   Demosaicing with alpha channel

    #COLOR_BayerBG2BGRA , #COLOR_BayerGB2BGRA , #COLOR_BayerRG2BGRA , #COLOR_BayerGR2BGRA

@sa cvtColor
*/
CV_EXPORTS_W void demosaicing(InputArray src, OutputArray dst, int code, int dstCn = 0);

//! @} imgproc_color_conversions

//! @addtogroup imgproc_shape
//! @{

/** @brief Calculates all of the moments up to the third order of a polygon or rasterized shape.

The function computes moments, up to the 3rd order, of a vector shape or a rasterized shape. The
results are returned in the structure cv::Moments.

@param array Raster image (single-channel, 8-bit or floating-point 2D array) or an array (
\f$1 \times N\f$ or \f$N \times 1\f$ ) of 2D points (Point or Point2f ).
@param binaryImage If it is true, all non-zero image pixels are treated as 1's. The parameter is
used for images only.
@returns moments.

@note Only applicable to contour moments calculations from Python bindings: Note that the numpy
type for the input array should be either np.int32 or np.float32.

@sa  contourArea, arcLength
 */
CV_EXPORTS_W Moments moments( InputArray array, bool binaryImage = false );

/** @brief Calculates seven Hu invariants.

The function calculates seven Hu invariants (introduced in @cite Hu62; see also
<http://en.wikipedia.org/wiki/Image_moment>) defined as:

\f[\begin{array}{l} hu[0]= \eta _{20}+ \eta _{02} \\ hu[1]=( \eta _{20}- \eta _{02})^{2}+4 \eta _{11}^{2} \\ hu[2]=( \eta _{30}-3 \eta _{12})^{2}+ (3 \eta _{21}- \eta _{03})^{2} \\ hu[3]=( \eta _{30}+ \eta _{12})^{2}+ ( \eta _{21}+ \eta _{03})^{2} \\ hu[4]=( \eta _{30}-3 \eta _{12})( \eta _{30}+ \eta _{12})[( \eta _{30}+ \eta _{12})^{2}-3( \eta _{21}+ \eta _{03})^{2}]+(3 \eta _{21}- \eta _{03})( \eta _{21}+ \eta _{03})[3( \eta _{30}+ \eta _{12})^{2}-( \eta _{21}+ \eta _{03})^{2}] \\ hu[5]=( \eta _{20}- \eta _{02})[( \eta _{30}+ \eta _{12})^{2}- ( \eta _{21}+ \eta _{03})^{2}]+4 \eta _{11}( \eta _{30}+ \eta _{12})( \eta _{21}+ \eta _{03}) \\ hu[6]=(3 \eta _{21}- \eta _{03})( \eta _{21}+ \eta _{03})[3( \eta _{30}+ \eta _{12})^{2}-( \eta _{21}+ \eta _{03})^{2}]-( \eta _{30}-3 \eta _{12})( \eta _{21}+ \eta _{03})[3( \eta _{30}+ \eta _{12})^{2}-( \eta _{21}+ \eta _{03})^{2}] \\ \end{array}\f]

where \f$\eta_{ji}\f$ stands for \f$\texttt{Moments::nu}_{ji}\f$ .

These values are proved to be invariants to the image scale, rotation, and reflection except the
seventh one, whose sign is changed by reflection. This invariance is proved with the assumption of
infinite image resolution. In case of raster images, the computed Hu invariants for the original and
transformed images are a bit different.

@param moments Input moments computed with moments .
@param hu Output Hu invariants.

@sa matchShapes
 */
CV_EXPORTS void HuMoments( const Moments& moments, double hu[7] );

/** @overload */
CV_EXPORTS_W void HuMoments( const Moments& m, OutputArray hu );

//! @} imgproc_shape

//! @addtogroup imgproc_object
//! @{

//! type of the template matching operation
enum TemplateMatchModes {
    TM_SQDIFF        = 0, /*!< \f[R(x,y)= \sum _{x',y'} (T(x',y')-I(x+x',y+y'))^2\f]
                               with mask:
                               \f[R(x,y)= \sum _{x',y'} \left( (T(x',y')-I(x+x',y+y')) \cdot
                                  M(x',y') \right)^2\f] */
    TM_SQDIFF_NORMED = 1, /*!< \f[R(x,y)= \frac{\sum_{x',y'} (T(x',y')-I(x+x',y+y'))^2}{\sqrt{\sum_{
                                  x',y'}T(x',y')^2 \cdot \sum_{x',y'} I(x+x',y+y')^2}}\f]
                               with mask:
                               \f[R(x,y)= \frac{\sum _{x',y'} \left( (T(x',y')-I(x+x',y+y')) \cdot
                                  M(x',y') \right)^2}{\sqrt{\sum_{x',y'} \left( T(x',y') \cdot
                                  M(x',y') \right)^2 \cdot \sum_{x',y'} \left( I(x+x',y+y') \cdot
                                  M(x',y') \right)^2}}\f] */
    TM_CCORR         = 2, /*!< \f[R(x,y)= \sum _{x',y'} (T(x',y') \cdot I(x+x',y+y'))\f]
                               with mask:
                               \f[R(x,y)= \sum _{x',y'} (T(x',y') \cdot I(x+x',y+y') \cdot M(x',y')
                                  ^2)\f] */
    TM_CCORR_NORMED  = 3, /*!< \f[R(x,y)= \frac{\sum_{x',y'} (T(x',y') \cdot I(x+x',y+y'))}{\sqrt{
                                  \sum_{x',y'}T(x',y')^2 \cdot \sum_{x',y'} I(x+x',y+y')^2}}\f]
                               with mask:
                               \f[R(x,y)= \frac{\sum_{x',y'} (T(x',y') \cdot I(x+x',y+y') \cdot
                                  M(x',y')^2)}{\sqrt{\sum_{x',y'} \left( T(x',y') \cdot M(x',y')
                                  \right)^2 \cdot \sum_{x',y'} \left( I(x+x',y+y') \cdot M(x',y')
                                  \right)^2}}\f] */
    TM_CCOEFF        = 4, /*!< \f[R(x,y)= \sum _{x',y'} (T'(x',y') \cdot I'(x+x',y+y'))\f]
                               where
                               \f[\begin{array}{l} T'(x',y')=T(x',y') - 1/(w \cdot h) \cdot \sum _{
                                  x'',y''} T(x'',y'') \\ I'(x+x',y+y')=I(x+x',y+y') - 1/(w \cdot h)
                                  \cdot \sum _{x'',y''} I(x+x'',y+y'') \end{array}\f]
                               with mask:
                               \f[\begin{array}{l} T'(x',y')=M(x',y') \cdot \left( T(x',y') -
                                  \frac{1}{\sum _{x'',y''} M(x'',y'')} \cdot \sum _{x'',y''}
                                  (T(x'',y'') \cdot M(x'',y'')) \right) \\ I'(x+x',y+y')=M(x',y')
                                  \cdot \left( I(x+x',y+y') - \frac{1}{\sum _{x'',y''} M(x'',y'')}
                                  \cdot \sum _{x'',y''} (I(x+x'',y+y'') \cdot M(x'',y'')) \right)
                                  \end{array} \f] */
    TM_CCOEFF_NORMED = 5  /*!< \f[R(x,y)= \frac{ \sum_{x',y'} (T'(x',y') \cdot I'(x+x',y+y')) }{
                                  \sqrt{\sum_{x',y'}T'(x',y')^2 \cdot \sum_{x',y'} I'(x+x',y+y')^2}
                                  }\f] */
};

/** @example samples/cpp/tutorial_code/Histograms_Matching/MatchTemplate_Demo.cpp
An example using Template Matching algorithm
*/

/** @brief Compares a template against overlapped image regions.

The function slides through image , compares the overlapped patches of size \f$w \times h\f$ against
templ using the specified method and stores the comparison results in result . #TemplateMatchModes
describes the formulae for the available comparison methods ( \f$I\f$ denotes image, \f$T\f$
template, \f$R\f$ result, \f$M\f$ the optional mask ). The summation is done over template and/or
the image patch: \f$x' = 0...w-1, y' = 0...h-1\f$

After the function finishes the comparison, the best matches can be found as global minimums (when
#TM_SQDIFF was used) or maximums (when #TM_CCORR or #TM_CCOEFF was used) using the
#minMaxLoc function. In case of a color image, template summation in the numerator and each sum in
the denominator is done over all of the channels and separate mean values are used for each channel.
That is, the function can take a color template and a color image. The result will still be a
single-channel image, which is easier to analyze.

@param image Image where the search is running. It must be 8-bit or 32-bit floating-point.
@param templ Searched template. It must be not greater than the source image and have the same
data type.
@param result Map of comparison results. It must be single-channel 32-bit floating-point. If image
is \f$W \times H\f$ and templ is \f$w \times h\f$ , then result is \f$(W-w+1) \times (H-h+1)\f$ .
@param method Parameter specifying the comparison method, see #TemplateMatchModes
@param mask Optional mask. It must have the same size as templ. It must either have the same number
            of channels as template or only one channel, which is then used for all template and
            image channels. If the data type is #CV_8U, the mask is interpreted as a binary mask,
            meaning only elements where mask is nonzero are used and are kept unchanged independent
            of the actual mask value (weight equals 1). For data tpye #CV_32F, the mask values are
            used as weights. The exact formulas are documented in #TemplateMatchModes.
 */
CV_EXPORTS_W void matchTemplate( InputArray image, InputArray templ,
                                 OutputArray result, int method, InputArray mask = noArray() );

//! @}

//! @addtogroup imgproc_shape
//! @{

/** @example samples/cpp/connected_components.cpp
This program demonstrates connected components and use of the trackbar
*/

/** @brief computes the connected components labeled image of boolean image

image with 4 or 8 way connectivity - returns N, the total number of labels [0, N-1] where 0
represents the background label. ltype specifies the output label image type, an important
consideration based on the total number of labels or alternatively the total number of pixels in
the source image. ccltype specifies the connected components labeling algorithm to use, currently
Grana (BBDT) and Wu's (SAUF) @cite Wu2009 algorithms are supported, see the #ConnectedComponentsAlgorithmsTypes
for details. Note that SAUF algorithm forces a row major ordering of labels while BBDT does not.
This function uses parallel version of both Grana and Wu's algorithms if at least one allowed
parallel framework is enabled and if the rows of the image are at least twice the number returned by #getNumberOfCPUs.

@param image the 8-bit single-channel image to be labeled
@param labels destination labeled image
@param connectivity 8 or 4 for 8-way or 4-way connectivity respectively
@param ltype output image label type. Currently CV_32S and CV_16U are supported.
@param ccltype connected components algorithm type (see the #ConnectedComponentsAlgorithmsTypes).
*/
CV_EXPORTS_AS(connectedComponentsWithAlgorithm) int connectedComponents(InputArray image, OutputArray labels,
                                                                        int connectivity, int ltype, int ccltype);


/** @overload

@param image the 8-bit single-channel image to be labeled
@param labels destination labeled image
@param connectivity 8 or 4 for 8-way or 4-way connectivity respectively
@param ltype output image label type. Currently CV_32S and CV_16U are supported.
*/
CV_EXPORTS_W int connectedComponents(InputArray image, OutputArray labels,
                                     int connectivity = 8, int ltype = CV_32S);


/** @brief computes the connected components labeled image of boolean image and also produces a statistics output for each label

image with 4 or 8 way connectivity - returns N, the total number of labels [0, N-1] where 0
represents the background label. ltype specifies the output label image type, an important
consideration based on the total number of labels or alternatively the total number of pixels in
the source image. ccltype specifies the connected components labeling algorithm to use, currently
Grana's (BBDT) and Wu's (SAUF) @cite Wu2009 algorithms are supported, see the #ConnectedComponentsAlgorithmsTypes
for details. Note that SAUF algorithm forces a row major ordering of labels while BBDT does not.
This function uses parallel version of both Grana and Wu's algorithms (statistics included) if at least one allowed
parallel framework is enabled and if the rows of the image are at least twice the number returned by #getNumberOfCPUs.

@param image the 8-bit single-channel image to be labeled
@param labels destination labeled image
@param stats statistics output for each label, including the background label.
Statistics are accessed via stats(label, COLUMN) where COLUMN is one of
#ConnectedComponentsTypes, selecting the statistic. The data type is CV_32S.
@param centroids centroid output for each label, including the background label. Centroids are
accessed via centroids(label, 0) for x and centroids(label, 1) for y. The data type CV_64F.
@param connectivity 8 or 4 for 8-way or 4-way connectivity respectively
@param ltype output image label type. Currently CV_32S and CV_16U are supported.
@param ccltype connected components algorithm type (see #ConnectedComponentsAlgorithmsTypes).
*/
CV_EXPORTS_AS(connectedComponentsWithStatsWithAlgorithm) int connectedComponentsWithStats(InputArray image, OutputArray labels,
                                                                                          OutputArray stats, OutputArray centroids,
                                                                                          int connectivity, int ltype, int ccltype);

/** @overload
@param image the 8-bit single-channel image to be labeled
@param labels destination labeled image
@param stats statistics output for each label, including the background label.
Statistics are accessed via stats(label, COLUMN) where COLUMN is one of
#ConnectedComponentsTypes, selecting the statistic. The data type is CV_32S.
@param centroids centroid output for each label, including the background label. Centroids are
accessed via centroids(label, 0) for x and centroids(label, 1) for y. The data type CV_64F.
@param connectivity 8 or 4 for 8-way or 4-way connectivity respectively
@param ltype output image label type. Currently CV_32S and CV_16U are supported.
*/
CV_EXPORTS_W int connectedComponentsWithStats(InputArray image, OutputArray labels,
                                              OutputArray stats, OutputArray centroids,
                                              int connectivity = 8, int ltype = CV_32S);


/** @brief Finds contours in a binary image.

The function retrieves contours from the binary image using the algorithm @cite Suzuki85 . The contours
are a useful tool for shape analysis and object detection and recognition. See squares.cpp in the
OpenCV sample directory.
@note Since opencv 3.2 source image is not modified by this function.

@param image Source, an 8-bit single-channel image. Non-zero pixels are treated as 1's. Zero
pixels remain 0's, so the image is treated as binary . You can use #compare, #inRange, #threshold ,
#adaptiveThreshold, #Canny, and others to create a binary image out of a grayscale or color one.
If mode equals to #RETR_CCOMP or #RETR_FLOODFILL, the input can also be a 32-bit integer image of labels (CV_32SC1).
@param contours Detected contours. Each contour is stored as a vector of points (e.g.
std::vector<std::vector<cv::Point> >).
@param hierarchy Optional output vector (e.g. std::vector<cv::Vec4i>), containing information about the image topology. It has
as many elements as the number of contours. For each i-th contour contours[i], the elements
hierarchy[i][0] , hierarchy[i][1] , hierarchy[i][2] , and hierarchy[i][3] are set to 0-based indices
in contours of the next and previous contours at the same hierarchical level, the first child
contour and the parent contour, respectively. If for the contour i there are no next, previous,
parent, or nested contours, the corresponding elements of hierarchy[i] will be negative.
@param mode Contour retrieval mode, see #RetrievalModes
@param method Contour approximation method, see #ContourApproximationModes
@param offset Optional offset by which every contour point is shifted. This is useful if the
contours are extracted from the image ROI and then they should be analyzed in the whole image
context.
 */
CV_EXPORTS_W void findContours( InputArray image, OutputArrayOfArrays contours,
                              OutputArray hierarchy, int mode,
                              int method, Point offset = Point());

/** @overload */
CV_EXPORTS void findContours( InputArray image, OutputArrayOfArrays contours,
                              int mode, int method, Point offset = Point());

/** @example samples/cpp/squares.cpp
A program using pyramid scaling, Canny, contours and contour simplification to find
squares in a list of images (pic1-6.png). Returns sequence of squares detected on the image.
*/

/** @example samples/tapi/squares.cpp
A program using pyramid scaling, Canny, contours and contour simplification to find
squares in the input image.
*/

/** @brief Approximates a polygonal curve(s) with the specified precision.

The function cv::approxPolyDP approximates a curve or a polygon with another curve/polygon with less
vertices so that the distance between them is less or equal to the specified precision. It uses the
Douglas-Peucker algorithm <http://en.wikipedia.org/wiki/Ramer-Douglas-Peucker_algorithm>

@param curve Input vector of a 2D point stored in std::vector or Mat
@param approxCurve Result of the approximation. The type should match the type of the input curve.
@param epsilon Parameter specifying the approximation accuracy. This is the maximum distance
between the original curve and its approximation.
@param closed If true, the approximated curve is closed (its first and last vertices are
connected). Otherwise, it is not closed.
 */
CV_EXPORTS_W void approxPolyDP( InputArray curve,
                                OutputArray approxCurve,
                                double epsilon, bool closed );

/** @brief Calculates a contour perimeter or a curve length.

The function computes a curve length or a closed contour perimeter.

@param curve Input vector of 2D points, stored in std::vector or Mat.
@param closed Flag indicating whether the curve is closed or not.
 */
CV_EXPORTS_W double arcLength( InputArray curve, bool closed );

/** @brief Calculates the up-right bounding rectangle of a point set or non-zero pixels of gray-scale image.

The function calculates and returns the minimal up-right bounding rectangle for the specified point set or
non-zero pixels of gray-scale image.

@param array Input gray-scale image or 2D point set, stored in std::vector or Mat.
 */
CV_EXPORTS_W Rect boundingRect( InputArray array );

/** @brief Calculates a contour area.

The function computes a contour area. Similarly to moments , the area is computed using the Green
formula. Thus, the returned area and the number of non-zero pixels, if you draw the contour using
#drawContours or #fillPoly , can be different. Also, the function will most certainly give a wrong
results for contours with self-intersections.

Example:
@code
    vector<Point> contour;
    contour.push_back(Point2f(0, 0));
    contour.push_back(Point2f(10, 0));
    contour.push_back(Point2f(10, 10));
    contour.push_back(Point2f(5, 4));

    double area0 = contourArea(contour);
    vector<Point> approx;
    approxPolyDP(contour, approx, 5, true);
    double area1 = contourArea(approx);

    cout << "area0 =" << area0 << endl <<
            "area1 =" << area1 << endl <<
            "approx poly vertices" << approx.size() << endl;
@endcode
@param contour Input vector of 2D points (contour vertices), stored in std::vector or Mat.
@param oriented Oriented area flag. If it is true, the function returns a signed area value,
depending on the contour orientation (clockwise or counter-clockwise). Using this feature you can
determine orientation of a contour by taking the sign of an area. By default, the parameter is
false, which means that the absolute value is returned.
 */
CV_EXPORTS_W double contourArea( InputArray contour, bool oriented = false );

/** @brief Finds a rotated rectangle of the minimum area enclosing the input 2D point set.

The function calculates and returns the minimum-area bounding rectangle (possibly rotated) for a
specified point set. Developer should keep in mind that the returned RotatedRect can contain negative
indices when data is close to the containing Mat element boundary.

@param points Input vector of 2D points, stored in std::vector\<\> or Mat
 */
CV_EXPORTS_W RotatedRect minAreaRect( InputArray points );

/** @brief Finds the four vertices of a rotated rect. Useful to draw the rotated rectangle.

The function finds the four vertices of a rotated rectangle. This function is useful to draw the
rectangle. In C++, instead of using this function, you can directly use RotatedRect::points method. Please
visit the @ref tutorial_bounding_rotated_ellipses "tutorial on Creating Bounding rotated boxes and ellipses for contours" for more information.

@param box The input rotated rectangle. It may be the output of
@param points The output array of four vertices of rectangles.
 */
CV_EXPORTS_W void boxPoints(RotatedRect box, OutputArray points);

/** @brief Finds a circle of the minimum area enclosing a 2D point set.

The function finds the minimal enclosing circle of a 2D point set using an iterative algorithm.

@param points Input vector of 2D points, stored in std::vector\<\> or Mat
@param center Output center of the circle.
@param radius Output radius of the circle.
 */
CV_EXPORTS_W void minEnclosingCircle( InputArray points,
                                      CV_OUT Point2f& center, CV_OUT float& radius );

/** @example samples/cpp/minarea.cpp
*/

/** @brief Finds a triangle of minimum area enclosing a 2D point set and returns its area.

The function finds a triangle of minimum area enclosing the given set of 2D points and returns its
area. The output for a given 2D point set is shown in the image below. 2D points are depicted in
*red* and the enclosing triangle in *yellow*.

![Sample output of the minimum enclosing triangle function](pics/minenclosingtriangle.png)

The implementation of the algorithm is based on O'Rourke's @cite ORourke86 and Klee and Laskowski's
@cite KleeLaskowski85 papers. O'Rourke provides a \f$\theta(n)\f$ algorithm for finding the minimal
enclosing triangle of a 2D convex polygon with n vertices. Since the #minEnclosingTriangle function
takes a 2D point set as input an additional preprocessing step of computing the convex hull of the
2D point set is required. The complexity of the #convexHull function is \f$O(n log(n))\f$ which is higher
than \f$\theta(n)\f$. Thus the overall complexity of the function is \f$O(n log(n))\f$.

@param points Input vector of 2D points with depth CV_32S or CV_32F, stored in std::vector\<\> or Mat
@param triangle Output vector of three 2D points defining the vertices of the triangle. The depth
of the OutputArray must be CV_32F.
 */
CV_EXPORTS_W double minEnclosingTriangle( InputArray points, CV_OUT OutputArray triangle );

/** @brief Compares two shapes.

The function compares two shapes. All three implemented methods use the Hu invariants (see #HuMoments)

@param contour1 First contour or grayscale image.
@param contour2 Second contour or grayscale image.
@param method Comparison method, see #ShapeMatchModes
@param parameter Method-specific parameter (not supported now).
 */
CV_EXPORTS_W double matchShapes( InputArray contour1, InputArray contour2,
                                 int method, double parameter );

/** @example samples/cpp/convexhull.cpp
An example using the convexHull functionality
*/

/** @brief Finds the convex hull of a point set.

The function cv::convexHull finds the convex hull of a 2D point set using the Sklansky's algorithm @cite Sklansky82
that has *O(N logN)* complexity in the current implementation.

@param points Input 2D point set, stored in std::vector or Mat.
@param hull Output convex hull. It is either an integer vector of indices or vector of points. In
the first case, the hull elements are 0-based indices of the convex hull points in the original
array (since the set of convex hull points is a subset of the original point set). In the second
case, hull elements are the convex hull points themselves.
@param clockwise Orientation flag. If it is true, the output convex hull is oriented clockwise.
Otherwise, it is oriented counter-clockwise. The assumed coordinate system has its X axis pointing
to the right, and its Y axis pointing upwards.
@param returnPoints Operation flag. In case of a matrix, when the flag is true, the function
returns convex hull points. Otherwise, it returns indices of the convex hull points. When the
output array is std::vector, the flag is ignored, and the output depends on the type of the
vector: std::vector\<int\> implies returnPoints=false, std::vector\<Point\> implies
returnPoints=true.

@note `points` and `hull` should be different arrays, inplace processing isn't supported.

Check @ref tutorial_hull "the corresponding tutorial" for more details.

useful links:

https://www.learnopencv.com/convex-hull-using-opencv-in-python-and-c/
 */
CV_EXPORTS_W void convexHull( InputArray points, OutputArray hull,
                              bool clockwise = false, bool returnPoints = true );

/** @brief Finds the convexity defects of a contour.

The figure below displays convexity defects of a hand contour:

![image](pics/defects.png)

@param contour Input contour.
@param convexhull Convex hull obtained using convexHull that should contain indices of the contour
points that make the hull.
@param convexityDefects The output vector of convexity defects. In C++ and the new Python/Java
interface each convexity defect is represented as 4-element integer vector (a.k.a. #Vec4i):
(start_index, end_index, farthest_pt_index, fixpt_depth), where indices are 0-based indices
in the original contour of the convexity defect beginning, end and the farthest point, and
fixpt_depth is fixed-point approximation (with 8 fractional bits) of the distance between the
farthest contour point and the hull. That is, to get the floating-point value of the depth will be
fixpt_depth/256.0.
 */
CV_EXPORTS_W void convexityDefects( InputArray contour, InputArray convexhull, OutputArray convexityDefects );

/** @brief Tests a contour convexity.

The function tests whether the input contour is convex or not. The contour must be simple, that is,
without self-intersections. Otherwise, the function output is undefined.

@param contour Input vector of 2D points, stored in std::vector\<\> or Mat
 */
CV_EXPORTS_W bool isContourConvex( InputArray contour );

/** @example samples/cpp/intersectExample.cpp
Examples of how intersectConvexConvex works
*/

/** @brief Finds intersection of two convex polygons

@param _p1 First polygon
@param _p2 Second polygon
@param _p12 Output polygon describing the intersecting area
@param handleNested When true, an intersection is found if one of the polygons is fully enclosed in the other.
When false, no intersection is found. If the polygons share a side or the vertex of one polygon lies on an edge
of the other, they are not considered nested and an intersection will be found regardless of the value of handleNested.

@returns Absolute value of area of intersecting polygon

@note intersectConvexConvex doesn't confirm that both polygons are convex and will return invalid results if they aren't.
 */
CV_EXPORTS_W float intersectConvexConvex( InputArray _p1, InputArray _p2,
                                          OutputArray _p12, bool handleNested = true );

/** @example samples/cpp/fitellipse.cpp
An example using the fitEllipse technique
*/

/** @brief Fits an ellipse around a set of 2D points.

The function calculates the ellipse that fits (in a least-squares sense) a set of 2D points best of
all. It returns the rotated rectangle in which the ellipse is inscribed. The first algorithm described by @cite Fitzgibbon95
is used. Developer should keep in mind that it is possible that the returned
ellipse/rotatedRect data contains negative indices, due to the data points being close to the
border of the containing Mat element.

@param points Input 2D point set, stored in std::vector\<\> or Mat
 */
CV_EXPORTS_W RotatedRect fitEllipse( InputArray points );

/** @brief Fits an ellipse around a set of 2D points.

 The function calculates the ellipse that fits a set of 2D points.
 It returns the rotated rectangle in which the ellipse is inscribed.
 The Approximate Mean Square (AMS) proposed by @cite Taubin1991 is used.

 For an ellipse, this basis set is \f$ \chi= \left(x^2, x y, y^2, x, y, 1\right) \f$,
 which is a set of six free coefficients \f$ A^T=\left\{A_{\text{xx}},A_{\text{xy}},A_{\text{yy}},A_x,A_y,A_0\right\} \f$.
 However, to specify an ellipse, all that is needed is five numbers; the major and minor axes lengths \f$ (a,b) \f$,
 the position \f$ (x_0,y_0) \f$, and the orientation \f$ \theta \f$. This is because the basis set includes lines,
 quadratics, parabolic and hyperbolic functions as well as elliptical functions as possible fits.
 If the fit is found to be a parabolic or hyperbolic function then the standard #fitEllipse method is used.
 The AMS method restricts the fit to parabolic, hyperbolic and elliptical curves
 by imposing the condition that \f$ A^T ( D_x^T D_x  +   D_y^T D_y) A = 1 \f$ where
 the matrices \f$ Dx \f$ and \f$ Dy \f$ are the partial derivatives of the design matrix \f$ D \f$ with
 respect to x and y. The matrices are formed row by row applying the following to
 each of the points in the set:
 \f{align*}{
 D(i,:)&=\left\{x_i^2, x_i y_i, y_i^2, x_i, y_i, 1\right\} &
 D_x(i,:)&=\left\{2 x_i,y_i,0,1,0,0\right\} &
 D_y(i,:)&=\left\{0,x_i,2 y_i,0,1,0\right\}
 \f}
 The AMS method minimizes the cost function
 \f{equation*}{
 \epsilon ^2=\frac{ A^T D^T D A }{ A^T (D_x^T D_x +  D_y^T D_y) A^T }
 \f}

 The minimum cost is found by solving the generalized eigenvalue problem.

 \f{equation*}{
 D^T D A = \lambda  \left( D_x^T D_x +  D_y^T D_y\right) A
 \f}

 @param points Input 2D point set, stored in std::vector\<\> or Mat
 */
CV_EXPORTS_W RotatedRect fitEllipseAMS( InputArray points );


/** @brief Fits an ellipse around a set of 2D points.

 The function calculates the ellipse that fits a set of 2D points.
 It returns the rotated rectangle in which the ellipse is inscribed.
 The Direct least square (Direct) method by @cite Fitzgibbon1999 is used.

 For an ellipse, this basis set is \f$ \chi= \left(x^2, x y, y^2, x, y, 1\right) \f$,
 which is a set of six free coefficients \f$ A^T=\left\{A_{\text{xx}},A_{\text{xy}},A_{\text{yy}},A_x,A_y,A_0\right\} \f$.
 However, to specify an ellipse, all that is needed is five numbers; the major and minor axes lengths \f$ (a,b) \f$,
 the position \f$ (x_0,y_0) \f$, and the orientation \f$ \theta \f$. This is because the basis set includes lines,
 quadratics, parabolic and hyperbolic functions as well as elliptical functions as possible fits.
 The Direct method confines the fit to ellipses by ensuring that \f$ 4 A_{xx} A_{yy}- A_{xy}^2 > 0 \f$.
 The condition imposed is that \f$ 4 A_{xx} A_{yy}- A_{xy}^2=1 \f$ which satisfies the inequality
 and as the coefficients can be arbitrarily scaled is not overly restrictive.

 \f{equation*}{
 \epsilon ^2= A^T D^T D A \quad \text{with} \quad A^T C A =1 \quad \text{and} \quad C=\left(\begin{matrix}
 0 & 0  & 2  & 0  & 0  &  0  \\
 0 & -1  & 0  & 0  & 0  &  0 \\
 2 & 0  & 0  & 0  & 0  &  0 \\
 0 & 0  & 0  & 0  & 0  &  0 \\
 0 & 0  & 0  & 0  & 0  &  0 \\
 0 & 0  & 0  & 0  & 0  &  0
 \end{matrix} \right)
 \f}

 The minimum cost is found by solving the generalized eigenvalue problem.

 \f{equation*}{
 D^T D A = \lambda  \left( C\right) A
 \f}

 The system produces only one positive eigenvalue \f$ \lambda\f$ which is chosen as the solution
 with its eigenvector \f$\mathbf{u}\f$. These are used to find the coefficients

 \f{equation*}{
 A = \sqrt{\frac{1}{\mathbf{u}^T C \mathbf{u}}}  \mathbf{u}
 \f}
 The scaling factor guarantees that  \f$A^T C A =1\f$.

 @param points Input 2D point set, stored in std::vector\<\> or Mat
 */
CV_EXPORTS_W RotatedRect fitEllipseDirect( InputArray points );

/** @brief Fits a line to a 2D or 3D point set.

The function fitLine fits a line to a 2D or 3D point set by minimizing \f$\sum_i \rho(r_i)\f$ where
\f$r_i\f$ is a distance between the \f$i^{th}\f$ point, the line and \f$\rho(r)\f$ is a distance function, one
of the following:
-  DIST_L2
\f[\rho (r) = r^2/2  \quad \text{(the simplest and the fastest least-squares method)}\f]
- DIST_L1
\f[\rho (r) = r\f]
- DIST_L12
\f[\rho (r) = 2  \cdot ( \sqrt{1 + \frac{r^2}{2}} - 1)\f]
- DIST_FAIR
\f[\rho \left (r \right ) = C^2  \cdot \left (  \frac{r}{C} -  \log{\left(1 + \frac{r}{C}\right)} \right )  \quad \text{where} \quad C=1.3998\f]
- DIST_WELSCH
\f[\rho \left (r \right ) =  \frac{C^2}{2} \cdot \left ( 1 -  \exp{\left(-\left(\frac{r}{C}\right)^2\right)} \right )  \quad \text{where} \quad C=2.9846\f]
- DIST_HUBER
\f[\rho (r) =  \fork{r^2/2}{if \(r < C\)}{C \cdot (r-C/2)}{otherwise} \quad \text{where} \quad C=1.345\f]

The algorithm is based on the M-estimator ( <http://en.wikipedia.org/wiki/M-estimator> ) technique
that iteratively fits the line using the weighted least-squares algorithm. After each iteration the
weights \f$w_i\f$ are adjusted to be inversely proportional to \f$\rho(r_i)\f$ .

@param points Input vector of 2D or 3D points, stored in std::vector\<\> or Mat.
@param line Output line parameters. In case of 2D fitting, it should be a vector of 4 elements
(like Vec4f) - (vx, vy, x0, y0), where (vx, vy) is a normalized vector collinear to the line and
(x0, y0) is a point on the line. In case of 3D fitting, it should be a vector of 6 elements (like
Vec6f) - (vx, vy, vz, x0, y0, z0), where (vx, vy, vz) is a normalized vector collinear to the line
and (x0, y0, z0) is a point on the line.
@param distType Distance used by the M-estimator, see #DistanceTypes
@param param Numerical parameter ( C ) for some types of distances. If it is 0, an optimal value
is chosen.
@param reps Sufficient accuracy for the radius (distance between the coordinate origin and the line).
@param aeps Sufficient accuracy for the angle. 0.01 would be a good default value for reps and aeps.
 */
CV_EXPORTS_W void fitLine( InputArray points, OutputArray line, int distType,
                           double param, double reps, double aeps );

/** @brief Performs a point-in-contour test.

The function determines whether the point is inside a contour, outside, or lies on an edge (or
coincides with a vertex). It returns positive (inside), negative (outside), or zero (on an edge)
value, correspondingly. When measureDist=false , the return value is +1, -1, and 0, respectively.
Otherwise, the return value is a signed distance between the point and the nearest contour edge.

See below a sample output of the function where each image pixel is tested against the contour:

![sample output](pics/pointpolygon.png)

@param contour Input contour.
@param pt Point tested against the contour.
@param measureDist If true, the function estimates the signed distance from the point to the
nearest contour edge. Otherwise, the function only checks if the point is inside a contour or not.
 */
CV_EXPORTS_W double pointPolygonTest( InputArray contour, Point2f pt, bool measureDist );

/** @brief Finds out if there is any intersection between two rotated rectangles.

If there is then the vertices of the intersecting region are returned as well.

Below are some examples of intersection configurations. The hatched pattern indicates the
intersecting region and the red vertices are returned by the function.

![intersection examples](pics/intersection.png)

@param rect1 First rectangle
@param rect2 Second rectangle
@param intersectingRegion The output array of the vertices of the intersecting region. It returns
at most 8 vertices. Stored as std::vector\<cv::Point2f\> or cv::Mat as Mx1 of type CV_32FC2.
@returns One of #RectanglesIntersectTypes
 */
CV_EXPORTS_W int rotatedRectangleIntersection( const RotatedRect& rect1, const RotatedRect& rect2, OutputArray intersectingRegion  );

/** @brief Creates a smart pointer to a cv::GeneralizedHoughBallard class and initializes it.
*/
CV_EXPORTS_W Ptr<GeneralizedHoughBallard> createGeneralizedHoughBallard();

/** @brief Creates a smart pointer to a cv::GeneralizedHoughGuil class and initializes it.
*/
CV_EXPORTS_W Ptr<GeneralizedHoughGuil> createGeneralizedHoughGuil();

//! @} imgproc_shape

//! @addtogroup imgproc_colormap
//! @{

//! GNU Octave/MATLAB equivalent colormaps
enum ColormapTypes
{
    COLORMAP_AUTUMN = 0, //!< ![autumn](pics/colormaps/colorscale_autumn.jpg)
    COLORMAP_BONE = 1, //!< ![bone](pics/colormaps/colorscale_bone.jpg)
    COLORMAP_JET = 2, //!< ![jet](pics/colormaps/colorscale_jet.jpg)
    COLORMAP_WINTER = 3, //!< ![winter](pics/colormaps/colorscale_winter.jpg)
    COLORMAP_RAINBOW = 4, //!< ![rainbow](pics/colormaps/colorscale_rainbow.jpg)
    COLORMAP_OCEAN = 5, //!< ![ocean](pics/colormaps/colorscale_ocean.jpg)
    COLORMAP_SUMMER = 6, //!< ![summer](pics/colormaps/colorscale_summer.jpg)
    COLORMAP_SPRING = 7, //!< ![spring](pics/colormaps/colorscale_spring.jpg)
    COLORMAP_COOL = 8, //!< ![cool](pics/colormaps/colorscale_cool.jpg)
    COLORMAP_HSV = 9, //!< ![HSV](pics/colormaps/colorscale_hsv.jpg)
    COLORMAP_PINK = 10, //!< ![pink](pics/colormaps/colorscale_pink.jpg)
    COLORMAP_HOT = 11, //!< ![hot](pics/colormaps/colorscale_hot.jpg)
    COLORMAP_PARULA = 12, //!< ![parula](pics/colormaps/colorscale_parula.jpg)
    COLORMAP_MAGMA = 13, //!< ![magma](pics/colormaps/colorscale_magma.jpg)
    COLORMAP_INFERNO = 14, //!< ![inferno](pics/colormaps/colorscale_inferno.jpg)
    COLORMAP_PLASMA = 15, //!< ![plasma](pics/colormaps/colorscale_plasma.jpg)
    COLORMAP_VIRIDIS = 16, //!< ![viridis](pics/colormaps/colorscale_viridis.jpg)
    COLORMAP_CIVIDIS = 17, //!< ![cividis](pics/colormaps/colorscale_cividis.jpg)
    COLORMAP_TWILIGHT = 18, //!< ![twilight](pics/colormaps/colorscale_twilight.jpg)
    COLORMAP_TWILIGHT_SHIFTED = 19, //!< ![twilight shifted](pics/colormaps/colorscale_twilight_shifted.jpg)
    COLORMAP_TURBO = 20, //!< ![turbo](pics/colormaps/colorscale_turbo.jpg)
    COLORMAP_DEEPGREEN = 21  //!< ![deepgreen](pics/colormaps/colorscale_deepgreen.jpg)
};

/** @example samples/cpp/falsecolor.cpp
An example using applyColorMap function
*/

/** @brief Applies a GNU Octave/MATLAB equivalent colormap on a given image.

@param src The source image, grayscale or colored of type CV_8UC1 or CV_8UC3.
@param dst The result is the colormapped source image. Note: Mat::create is called on dst.
@param colormap The colormap to apply, see #ColormapTypes
*/
CV_EXPORTS_W void applyColorMap(InputArray src, OutputArray dst, int colormap);

/** @brief Applies a user colormap on a given image.

@param src The source image, grayscale or colored of type CV_8UC1 or CV_8UC3.
@param dst The result is the colormapped source image. Note: Mat::create is called on dst.
@param userColor The colormap to apply of type CV_8UC1 or CV_8UC3 and size 256
*/
CV_EXPORTS_W void applyColorMap(InputArray src, OutputArray dst, InputArray userColor);

//! @} imgproc_colormap

//! @addtogroup imgproc_draw
//! @{


/** OpenCV color channel order is BGR[A] */
#define CV_RGB(r, g, b)  cv::Scalar((b), (g), (r), 0)

/** @brief Draws a line segment connecting two points.

The function line draws the line segment between pt1 and pt2 points in the image. The line is
clipped by the image boundaries. For non-antialiased lines with integer coordinates, the 8-connected
or 4-connected Bresenham algorithm is used. Thick lines are drawn with rounding endings. Antialiased
lines are drawn using Gaussian filtering.

@param img Image.
@param pt1 First point of the line segment.
@param pt2 Second point of the line segment.
@param color Line color.
@param thickness Line thickness.
@param lineType Type of the line. See #LineTypes.
@param shift Number of fractional bits in the point coordinates.
 */
CV_EXPORTS_W void line(InputOutputArray img, Point pt1, Point pt2, const Scalar& color,
                     int thickness = 1, int lineType = LINE_8, int shift = 0);

/** @brief Draws a arrow segment pointing from the first point to the second one.

The function cv::arrowedLine draws an arrow between pt1 and pt2 points in the image. See also #line.

@param img Image.
@param pt1 The point the arrow starts from.
@param pt2 The point the arrow points to.
@param color Line color.
@param thickness Line thickness.
@param line_type Type of the line. See #LineTypes
@param shift Number of fractional bits in the point coordinates.
@param tipLength The length of the arrow tip in relation to the arrow length
 */
CV_EXPORTS_W void arrowedLine(InputOutputArray img, Point pt1, Point pt2, const Scalar& color,
                     int thickness=1, int line_type=8, int shift=0, double tipLength=0.1);

/** @brief Draws a simple, thick, or filled up-right rectangle.

The function cv::rectangle draws a rectangle outline or a filled rectangle whose two opposite corners
are pt1 and pt2.

@param img Image.
@param pt1 Vertex of the rectangle.
@param pt2 Vertex of the rectangle opposite to pt1 .
@param color Rectangle color or brightness (grayscale image).
@param thickness Thickness of lines that make up the rectangle. Negative values, like #FILLED,
mean that the function has to draw a filled rectangle.
@param lineType Type of the line. See #LineTypes
@param shift Number of fractional bits in the point coordinates.
 */
CV_EXPORTS_W void rectangle(InputOutputArray img, Point pt1, Point pt2,
                          const Scalar& color, int thickness = 1,
                          int lineType = LINE_8, int shift = 0);

/** @overload

use `rec` parameter as alternative specification of the drawn rectangle: `r.tl() and
r.br()-Point(1,1)` are opposite corners
*/
CV_EXPORTS_W void rectangle(InputOutputArray img, Rect rec,
                          const Scalar& color, int thickness = 1,
                          int lineType = LINE_8, int shift = 0);

/** @example samples/cpp/tutorial_code/ImgProc/basic_drawing/Drawing_2.cpp
An example using drawing functions
*/

/** @brief Draws a circle.

The function cv::circle draws a simple or filled circle with a given center and radius.
@param img Image where the circle is drawn.
@param center Center of the circle.
@param radius Radius of the circle.
@param color Circle color.
@param thickness Thickness of the circle outline, if positive. Negative values, like #FILLED,
mean that a filled circle is to be drawn.
@param lineType Type of the circle boundary. See #LineTypes
@param shift Number of fractional bits in the coordinates of the center and in the radius value.
 */
CV_EXPORTS_W void circle(InputOutputArray img, Point center, int radius,
                       const Scalar& color, int thickness = 1,
                       int lineType = LINE_8, int shift = 0);

/** @brief Draws a simple or thick elliptic arc or fills an ellipse sector.

The function cv::ellipse with more parameters draws an ellipse outline, a filled ellipse, an elliptic
arc, or a filled ellipse sector. The drawing code uses general parametric form.
A piecewise-linear curve is used to approximate the elliptic arc
boundary. If you need more control of the ellipse rendering, you can retrieve the curve using
#ellipse2Poly and then render it with #polylines or fill it with #fillPoly. If you use the first
variant of the function and want to draw the whole ellipse, not an arc, pass `startAngle=0` and
`endAngle=360`. If `startAngle` is greater than `endAngle`, they are swapped. The figure below explains
the meaning of the parameters to draw the blue arc.

![Parameters of Elliptic Arc](pics/ellipse.svg)

@param img Image.
@param center Center of the ellipse.
@param axes Half of the size of the ellipse main axes.
@param angle Ellipse rotation angle in degrees.
@param startAngle Starting angle of the elliptic arc in degrees.
@param endAngle Ending angle of the elliptic arc in degrees.
@param color Ellipse color.
@param thickness Thickness of the ellipse arc outline, if positive. Otherwise, this indicates that
a filled ellipse sector is to be drawn.
@param lineType Type of the ellipse boundary. See #LineTypes
@param shift Number of fractional bits in the coordinates of the center and values of axes.
 */
CV_EXPORTS_W void ellipse(InputOutputArray img, Point center, Size axes,
                        double angle, double startAngle, double endAngle,
                        const Scalar& color, int thickness = 1,
                        int lineType = LINE_8, int shift = 0);

/** @overload
@param img Image.
@param box Alternative ellipse representation via RotatedRect. This means that the function draws
an ellipse inscribed in the rotated rectangle.
@param color Ellipse color.
@param thickness Thickness of the ellipse arc outline, if positive. Otherwise, this indicates that
a filled ellipse sector is to be drawn.
@param lineType Type of the ellipse boundary. See #LineTypes
*/
CV_EXPORTS_W void ellipse(InputOutputArray img, const RotatedRect& box, const Scalar& color,
                        int thickness = 1, int lineType = LINE_8);

/* ----------------------------------------------------------------------------------------- */
/* ADDING A SET OF PREDEFINED MARKERS WHICH COULD BE USED TO HIGHLIGHT POSITIONS IN AN IMAGE */
/* ----------------------------------------------------------------------------------------- */

/** @brief Draws a marker on a predefined position in an image.

The function cv::drawMarker draws a marker on a given position in the image. For the moment several
marker types are supported, see #MarkerTypes for more information.

@param img Image.
@param position The point where the crosshair is positioned.
@param color Line color.
@param markerType The specific type of marker you want to use, see #MarkerTypes
@param thickness Line thickness.
@param line_type Type of the line, See #LineTypes
@param markerSize The length of the marker axis [default = 20 pixels]
 */
CV_EXPORTS_W void drawMarker(InputOutputArray img, Point position, const Scalar& color,
                             int markerType = MARKER_CROSS, int markerSize=20, int thickness=1,
                             int line_type=8);

/* ----------------------------------------------------------------------------------------- */
/* END OF MARKER SECTION */
/* ----------------------------------------------------------------------------------------- */

/** @overload */
CV_EXPORTS void fillConvexPoly(InputOutputArray img, const Point* pts, int npts,
                               const Scalar& color, int lineType = LINE_8,
                               int shift = 0);

/** @brief Fills a convex polygon.

The function cv::fillConvexPoly draws a filled convex polygon. This function is much faster than the
function #fillPoly . It can fill not only convex polygons but any monotonic polygon without
self-intersections, that is, a polygon whose contour intersects every horizontal line (scan line)
twice at the most (though, its top-most and/or the bottom edge could be horizontal).

@param img Image.
@param points Polygon vertices.
@param color Polygon color.
@param lineType Type of the polygon boundaries. See #LineTypes
@param shift Number of fractional bits in the vertex coordinates.
 */
CV_EXPORTS_W void fillConvexPoly(InputOutputArray img, InputArray points,
                                 const Scalar& color, int lineType = LINE_8,
                                 int shift = 0);

/** @overload */
CV_EXPORTS void fillPoly(InputOutputArray img, const Point** pts,
                         const int* npts, int ncontours,
                         const Scalar& color, int lineType = LINE_8, int shift = 0,
                         Point offset = Point() );

/** @example samples/cpp/tutorial_code/ImgProc/basic_drawing/Drawing_1.cpp
An example using drawing functions
Check @ref tutorial_random_generator_and_text "the corresponding tutorial" for more details
*/

/** @brief Fills the area bounded by one or more polygons.

The function cv::fillPoly fills an area bounded by several polygonal contours. The function can fill
complex areas, for example, areas with holes, contours with self-intersections (some of their
parts), and so forth.

@param img Image.
@param pts Array of polygons where each polygon is represented as an array of points.
@param color Polygon color.
@param lineType Type of the polygon boundaries. See #LineTypes
@param shift Number of fractional bits in the vertex coordinates.
@param offset Optional offset of all points of the contours.
 */
CV_EXPORTS_W void fillPoly(InputOutputArray img, InputArrayOfArrays pts,
                           const Scalar& color, int lineType = LINE_8, int shift = 0,
                           Point offset = Point() );

/** @overload */
CV_EXPORTS void polylines(InputOutputArray img, const Point* const* pts, const int* npts,
                          int ncontours, bool isClosed, const Scalar& color,
                          int thickness = 1, int lineType = LINE_8, int shift = 0 );

/** @brief Draws several polygonal curves.

@param img Image.
@param pts Array of polygonal curves.
@param isClosed Flag indicating whether the drawn polylines are closed or not. If they are closed,
the function draws a line from the last vertex of each curve to its first vertex.
@param color Polyline color.
@param thickness Thickness of the polyline edges.
@param lineType Type of the line segments. See #LineTypes
@param shift Number of fractional bits in the vertex coordinates.

The function cv::polylines draws one or more polygonal curves.
 */
CV_EXPORTS_W void polylines(InputOutputArray img, InputArrayOfArrays pts,
                            bool isClosed, const Scalar& color,
                            int thickness = 1, int lineType = LINE_8, int shift = 0 );

/** @example samples/cpp/contours2.cpp
An example program illustrates the use of cv::findContours and cv::drawContours
\image html WindowsQtContoursOutput.png "Screenshot of the program"
*/

/** @example samples/cpp/segment_objects.cpp
An example using drawContours to clean up a background segmentation result
*/

/** @brief Draws contours outlines or filled contours.

The function draws contour outlines in the image if \f$\texttt{thickness} \ge 0\f$ or fills the area
bounded by the contours if \f$\texttt{thickness}<0\f$ . The example below shows how to retrieve
connected components from the binary image and label them: :
@include snippets/imgproc_drawContours.cpp

@param image Destination image.
@param contours All the input contours. Each contour is stored as a point vector.
@param contourIdx Parameter indicating a contour to draw. If it is negative, all the contours are drawn.
@param color Color of the contours.
@param thickness Thickness of lines the contours are drawn with. If it is negative (for example,
thickness=#FILLED ), the contour interiors are drawn.
@param lineType Line connectivity. See #LineTypes
@param hierarchy Optional information about hierarchy. It is only needed if you want to draw only
some of the contours (see maxLevel ).
@param maxLevel Maximal level for drawn contours. If it is 0, only the specified contour is drawn.
If it is 1, the function draws the contour(s) and all the nested contours. If it is 2, the function
draws the contours, all the nested contours, all the nested-to-nested contours, and so on. This
parameter is only taken into account when there is hierarchy available.
@param offset Optional contour shift parameter. Shift all the drawn contours by the specified
\f$\texttt{offset}=(dx,dy)\f$ .
@note When thickness=#FILLED, the function is designed to handle connected components with holes correctly
even when no hierarchy date is provided. This is done by analyzing all the outlines together
using even-odd rule. This may give incorrect results if you have a joint collection of separately retrieved
contours. In order to solve this problem, you need to call #drawContours separately for each sub-group
of contours, or iterate over the collection using contourIdx parameter.
 */
CV_EXPORTS_W void drawContours( InputOutputArray image, InputArrayOfArrays contours,
                              int contourIdx, const Scalar& color,
                              int thickness = 1, int lineType = LINE_8,
                              InputArray hierarchy = noArray(),
                              int maxLevel = INT_MAX, Point offset = Point() );

/** @brief Clips the line against the image rectangle.

The function cv::clipLine calculates a part of the line segment that is entirely within the specified
rectangle. it returns false if the line segment is completely outside the rectangle. Otherwise,
it returns true .
@param imgSize Image size. The image rectangle is Rect(0, 0, imgSize.width, imgSize.height) .
@param pt1 First line point.
@param pt2 Second line point.
 */
CV_EXPORTS bool clipLine(Size imgSize, CV_IN_OUT Point& pt1, CV_IN_OUT Point& pt2);

/** @overload
@param imgSize Image size. The image rectangle is Rect(0, 0, imgSize.width, imgSize.height) .
@param pt1 First line point.
@param pt2 Second line point.
*/
CV_EXPORTS bool clipLine(Size2l imgSize, CV_IN_OUT Point2l& pt1, CV_IN_OUT Point2l& pt2);

/** @overload
@param imgRect Image rectangle.
@param pt1 First line point.
@param pt2 Second line point.
*/
CV_EXPORTS_W bool clipLine(Rect imgRect, CV_OUT CV_IN_OUT Point& pt1, CV_OUT CV_IN_OUT Point& pt2);

/** @brief Approximates an elliptic arc with a polyline.

The function ellipse2Poly computes the vertices of a polyline that approximates the specified
elliptic arc. It is used by #ellipse. If `arcStart` is greater than `arcEnd`, they are swapped.

@param center Center of the arc.
@param axes Half of the size of the ellipse main axes. See #ellipse for details.
@param angle Rotation angle of the ellipse in degrees. See #ellipse for details.
@param arcStart Starting angle of the elliptic arc in degrees.
@param arcEnd Ending angle of the elliptic arc in degrees.
@param delta Angle between the subsequent polyline vertices. It defines the approximation
accuracy.
@param pts Output vector of polyline vertices.
 */
CV_EXPORTS_W void ellipse2Poly( Point center, Size axes, int angle,
                                int arcStart, int arcEnd, int delta,
                                CV_OUT std::vector<Point>& pts );

/** @overload
@param center Center of the arc.
@param axes Half of the size of the ellipse main axes. See #ellipse for details.
@param angle Rotation angle of the ellipse in degrees. See #ellipse for details.
@param arcStart Starting angle of the elliptic arc in degrees.
@param arcEnd Ending angle of the elliptic arc in degrees.
@param delta Angle between the subsequent polyline vertices. It defines the approximation accuracy.
@param pts Output vector of polyline vertices.
*/
CV_EXPORTS void ellipse2Poly(Point2d center, Size2d axes, int angle,
                             int arcStart, int arcEnd, int delta,
                             CV_OUT std::vector<Point2d>& pts);

/** @brief Draws a text string.

The function cv::putText renders the specified text string in the image. Symbols that cannot be rendered
using the specified font are replaced by question marks. See #getTextSize for a text rendering code
example.

@param img Image.
@param text Text string to be drawn.
@param org Bottom-left corner of the text string in the image.
@param fontFace Font type, see #HersheyFonts.
@param fontScale Font scale factor that is multiplied by the font-specific base size.
@param color Text color.
@param thickness Thickness of the lines used to draw a text.
@param lineType Line type. See #LineTypes
@param bottomLeftOrigin When true, the image data origin is at the bottom-left corner. Otherwise,
it is at the top-left corner.
 */
CV_EXPORTS_W void putText( InputOutputArray img, const String& text, Point org,
                         int fontFace, double fontScale, Scalar color,
                         int thickness = 1, int lineType = LINE_8,
                         bool bottomLeftOrigin = false );

/** @brief Calculates the width and height of a text string.

The function cv::getTextSize calculates and returns the size of a box that contains the specified text.
That is, the following code renders some text, the tight box surrounding it, and the baseline: :
@code
    String text = "Funny text inside the box";
    int fontFace = FONT_HERSHEY_SCRIPT_SIMPLEX;
    double fontScale = 2;
    int thickness = 3;

    Mat img(600, 800, CV_8UC3, Scalar::all(0));

    int baseline=0;
    Size textSize = getTextSize(text, fontFace,
                                fontScale, thickness, &baseline);
    baseline += thickness;

    // center the text
    Point textOrg((img.cols - textSize.width)/2,
                  (img.rows + textSize.height)/2);

    // draw the box
    rectangle(img, textOrg + Point(0, baseline),
              textOrg + Point(textSize.width, -textSize.height),
              Scalar(0,0,255));
    // ... and the baseline first
    line(img, textOrg + Point(0, thickness),
         textOrg + Point(textSize.width, thickness),
         Scalar(0, 0, 255));

    // then put the text itself
    putText(img, text, textOrg, fontFace, fontScale,
            Scalar::all(255), thickness, 8);
@endcode

@param text Input text string.
@param fontFace Font to use, see #HersheyFonts.
@param fontScale Font scale factor that is multiplied by the font-specific base size.
@param thickness Thickness of lines used to render the text. See #putText for details.
@param[out] baseLine y-coordinate of the baseline relative to the bottom-most text
point.
@return The size of a box that contains the specified text.

@see putText
 */
CV_EXPORTS_W Size getTextSize(const String& text, int fontFace,
                            double fontScale, int thickness,
                            CV_OUT int* baseLine);


/** @brief Calculates the font-specific size to use to achieve a given height in pixels.

@param fontFace Font to use, see cv::HersheyFonts.
@param pixelHeight Pixel height to compute the fontScale for
@param thickness Thickness of lines used to render the text.See putText for details.
@return The fontSize to use for cv::putText

@see cv::putText
*/
CV_EXPORTS_W double getFontScaleFromHeight(const int fontFace,
                                           const int pixelHeight,
                                           const int thickness = 1);

/** @brief Line iterator

The class is used to iterate over all the pixels on the raster line
segment connecting two specified points.

The class LineIterator is used to get each pixel of a raster line. It
can be treated as versatile implementation of the Bresenham algorithm
where you can stop at each pixel and do some extra processing, for
example, grab pixel values along the line or draw a line with an effect
(for example, with XOR operation).

The number of pixels along the line is stored in LineIterator::count.
The method LineIterator::pos returns the current position in the image:

@code{.cpp}
// grabs pixels along the line (pt1, pt2)
// from 8-bit 3-channel image to the buffer
LineIterator it(img, pt1, pt2, 8);
LineIterator it2 = it;
vector<Vec3b> buf(it.count);

for(int i = 0; i < it.count; i++, ++it)
    buf[i] = *(const Vec3b*)*it;

// alternative way of iterating through the line
for(int i = 0; i < it2.count; i++, ++it2)
{
    Vec3b val = img.at<Vec3b>(it2.pos());
    CV_Assert(buf[i] == val);
}
@endcode
*/
class CV_EXPORTS LineIterator
{
public:
    /** @brief initializes the iterator

    creates iterators for the line connecting pt1 and pt2
    the line will be clipped on the image boundaries
    the line is 8-connected or 4-connected
    If leftToRight=true, then the iteration is always done
    from the left-most point to the right most,
    not to depend on the ordering of pt1 and pt2 parameters;
    */
    LineIterator( const Mat& img, Point pt1, Point pt2,
                  int connectivity = 8, bool leftToRight = false )
    {
        init(&img, Rect(0, 0, img.cols, img.rows), pt1, pt2, connectivity, leftToRight);
        ptmode = false;
    }
    LineIterator( Point pt1, Point pt2,
                  int connectivity = 8, bool leftToRight = false )
    {
        init(0, Rect(std::min(pt1.x, pt2.x),
                     std::min(pt1.y, pt2.y),
                     std::max(pt1.x, pt2.x) - std::min(pt1.x, pt2.x) + 1,
                     std::max(pt1.y, pt2.y) - std::min(pt1.y, pt2.y) + 1),
             pt1, pt2, connectivity, leftToRight);
        ptmode = true;
    }
    LineIterator( Size boundingAreaSize, Point pt1, Point pt2,
                  int connectivity = 8, bool leftToRight = false )
    {
        init(0, Rect(0, 0, boundingAreaSize.width, boundingAreaSize.height),
             pt1, pt2, connectivity, leftToRight);
        ptmode = true;
    }
    LineIterator( Rect boundingAreaRect, Point pt1, Point pt2,
                  int connectivity = 8, bool leftToRight = false )
    {
        init(0, boundingAreaRect, pt1, pt2, connectivity, leftToRight);
        ptmode = true;
    }
    void init(const Mat* img, Rect boundingAreaRect, Point pt1, Point pt2, int connectivity, bool leftToRight);

    /** @brief returns pointer to the current pixel
    */
    uchar* operator *();
    /** @brief prefix increment operator (++it). shifts iterator to the next pixel
    */
    LineIterator& operator ++();
    /** @brief postfix increment operator (it++). shifts iterator to the next pixel
    */
    LineIterator operator ++(int);
    /** @brief returns coordinates of the current pixel
    */
    Point pos() const;

    uchar* ptr;
    const uchar* ptr0;
    int step, elemSize;
    int err, count;
    int minusDelta, plusDelta;
    int minusStep, plusStep;
    int minusShift, plusShift;
    Point p;
    bool ptmode;
};

//! @cond IGNORED

// === LineIterator implementation ===

inline
uchar* LineIterator::operator *()
{
    return ptmode ? 0 : ptr;
}

inline
LineIterator& LineIterator::operator ++()
{
    int mask = err < 0 ? -1 : 0;
    err += minusDelta + (plusDelta & mask);
    if(!ptmode)
    {
        ptr += minusStep + (plusStep & mask);
    }
    else
    {
        p.x += minusShift + (plusShift & mask);
        p.y += minusStep + (plusStep & mask);
    }
    return *this;
}

inline
LineIterator LineIterator::operator ++(int)
{
    LineIterator it = *this;
    ++(*this);
    return it;
}

inline
Point LineIterator::pos() const
{
    if(!ptmode)
    {
        size_t offset = (size_t)(ptr - ptr0);
        int y = (int)(offset/step);
        int x = (int)((offset - (size_t)y*step)/elemSize);
        return Point(x, y);
    }
    return p;
}

//! @endcond

//! @} imgproc_draw

//! @} imgproc

} // cv


#include "./imgproc/segmentation.hpp"


#endif