| title | authors | reviewers | approvers | creation-date | last-updated | status | ||||
|---|---|---|---|---|---|---|---|---|---|---|
API Conventions |
|
2022-02-23 |
2022-02-23 |
informational |
OpenShift APIs follow the Kubernetes API conventions with some exceptions and additional guidance, outlined below.
As OpenShift developers, we are creating a product where the API and its design play an important part in how our users interact with the product. Our users configure and use our product by interacting with the APIs that we define within the openshift/api repository. Whether they interact with the API via a CLI or GUI, the shape of the API contract will play a role in that experience.
As OpenShift is a large product with many teams working independently to introduce new features, we must have a centralised set of conventions to ensure that the look and feel of our APIs is consistent across the board. By having consistent API design, our end users will feel familiar with the API no matter which of our APIs they are working with.
API review also plays an important part in making sure that the APIs we release are of high quality and, where possible, consider the future needs of the API and the possible expansions we may make.
As OpenShift APIs are supported immediately once they are merged, API reviews play an important part in making sure the API is correct (it has a logical shape and sufficient validation and documentation) and that, should changes be required later, these changes can be made in a way that is compatible with the existing, shipped API.
A number of the conventions set out in this document derive from previous mistakes made in past API designs that became difficult to maintain as the API evolved. Importantly, this means that, while some of our APIs are not compliant with conventions, all new APIs must be compliant. Repeating the mistakes we have previously made is not acceptable and will not be approved by the API review team.
In OpenShift, we talk about two classes of APIs: workload and configuration APIs. The majority of APIs in OpenShift are configuration APIs, though some are also workload APIs.
A configuration API is one that is typically cluster-scoped, a singleton within the cluster, and managed by a cluster administrator only. An example of a configuration API would be the Infrastructure API that defines configuration for the infrastructure of the cluster, or the Network API that configures the networking within the cluster. A configuration API helps a user to configure a property or feature of the cluster.
A workload API typically is namespaced and is used by end users of the cluster. Workload API objects may be instantiated many times within a cluster and often many times within a namespace. Many of the Kubernetes core resources, such as the Deployment and DaemonSet APIs, are considered to be workload APIs. A workload API helps a user to run their workload on top of OpenShift.
You should try to identify whether your API is a workload or configuration API as there are different conventions applied to them based on which class the API falls into.
In workload APIs, we typically default fields on create (or update) when the field isn't set. This sets the value on the resource and forms a part of the contract between the user and the controller fulfilling the API. This has the effect that changing the default value in the API does not change the value for objects that have previously been created. This has the implication that you cannot change the behaviour of a default value once the API is defined as that would cause the same object to result in different behavior for different versions of the API, which would surprise users and compromise portability.
To change the default behaviour could constitute a breaking change and disrupt the end user's workload; the behaviour must remain consistent through the lifetime of the resource. This also means that defaults cannot be changed without a breaking change to the API. If a user were to delete their workload API resource and recreate it, the behaviour should remain the same.
With configuration APIs, we typically default fields within the controller and not within the API. This means that the platform has the ability to make changes to the defaults over time as we improve the capabilities of OpenShift.
An API author may reserve the right to change the default value of a field or the behavior of a field value within a configuration API. To reserve this right, the godoc for the API field must clearly indicate that the value or behavior is subject to change over time. When changing a default value or behaviour, we must ensure that there is a smooth upgrade process between the old default and the new default and that we will not break existing clusters.
Typically, optional fields on configuration APIs contain a statement within their Godoc to describe the default behaviour when they are omitted, along with a note that this is subject to change over time. The documentation section of the API conventions goes into more detail on how to write good comments on optional fields.
In configuration APIs specifically, we advise to avoid making fields pointers unless there is an absolute need to do so. An absolute need being the need to distinguish between the zero value and a nil value.
Using pointers makes writing code to interact with the API harder and more error prone, and it also harms the discoverability of the API.
When we use references, the marshalled version of a resource will include unset fields with their zero value. This means, that any end user fetching the resource from the API can observe that a particular field exists and "discover" a potentially new feature or option that they were not previously aware of. This has the effect of helping our users to understand how they might be able to configure their cluster, without having to search for features or review API schemas within the product docs.
Each idea should have a single possible expression in the API structures, without having multiple ways to say the same thing. From PEP 20:
- There should be one-- and preferably only one --obvious way to do it.
- Although that way may not be obvious at first unless you're Dutch.
For example, ClusterVersion's spec.desiredUpdate is a pointer field.
This does not meet our current API guidelines (see our pointer guidelines) as we advise against the use of pointers in most cases, but, in this example, it also allows the same semantic to be expressed in two different ways.
Both nil:
spec: {}and empty-struct:
spec:
desiredUpdate: {}represent the same "I do not desire an update" idea.
Having a single allowed phrasing has a few benefits:
- Users don't have to spend time wondering about which of several identical phrasings to use, or whether those phrasings are actually identical or not.
- Users don't have to debate about which of several pet phrasings are most canonical.
- There is no need to document alternative phrasings.
- Testing and verification for alternative phrasings are simple: the non-canonical phrasing is rejected, with documentation guiding users towards the canonical phrasing.
- When an API structure has multiple consumers, having a single phrasing for each idea reduces the scope of possible semantic divergence between consumers.
For existing APIs, progress toward these ideals needs to happen within the usual constraints on API changes.
Godoc text is generated into both Swagger and OpenAPI schemas which are then used
in tools such as oc explain or the API reference section of the OpenShift product
documentation to provide users descriptions of how to use and interact with our products.
In general, Godoc comments should be complete sentences and as much as possible, should adhere to the OpenShift product docs style guide.
The Godoc on any field in our API should be sufficiently explained such that an end user understands the following:
- What is the purpose of this field? What does it allow them to achieve?
- How does setting this field interact with other fields or features?
- What are the limitations of this field?
- Does it have any maximum or minimum value?
- If it is a string value, are the values limited to a specific list or can it be free form, must it meet a certain regex?
- Limitations should be written out within the Godoc as well as added within
kubebuildertags. Kubebuilder tags are used for validation but are not included within any generated documentation. - See the validation docs for inspiration on more validations to apply.
- Is the field optional or required?
- When optional, what happens when the field is omitted?
- You may choose to set a default value within the API or have a controller default the value at runtime.
- If you believe the default value may change over time, the value must be defaulted at runtime and you should
include a note in the Godoc which explains that the default value is subject to change. Typically this will look something likeWhen omitted, this means the user has no opinion and the value is left to the platform to choose a good default, which is subject to change over time. The current default is <default>.
For example:
// Example enables developers to understand how to write user facing documentation
// within the Godoc of their API types.
// Example is used within the wider Conventions to improve the end user experience
// and is a required convention.
// At least one value must be provided within the example and the type should be set
// appropriately.
// +kubebuilder:validation:Required
// + ---
// + Note that this comment line will not end up in the generated API schema as it is
// + preceded by a `+`. The `---` also prevents anything after it from being added to
// + the swagger docs.
// + This can be used to add notes for developers that aren't intended for end users.
type Example struct {
// Type allows the user to determine how to interpret the example given.
// It must be set to one of the following values: Documentation, Convention, or Mixed.
// +kubebuilder:validation:Enum:=Documentation;Convention;Mixed
// +kubebuilder:validation:Required
Type string `json:"type"`
// Documentation allows the user to define documentation for the example.
// When this value is provided, the type must be set to either Documentation or Mixed.
// The content of the documentation is free form text but must be no longer than 512 characters.
// +kubebuilder:validation:MaxLength:=512
// +optional
Documentation string `json:"documentation,omitempty"`
// Convention allows the user to define the configuration for this API convention.
// For example, it allows them to set the priority over other conventions and whether
// this policy should be strictly observed or weakly observed.
// When this value is provided, the type must be set to either Convention or Mixed.
// +optional
Convention ConventionSpec `json:"convention,omitempty"`
// Author allows the user to denote an author for the example convention.
// The author is not required. When omitted, this means the user has no opinion and the value is
// left to the platform to choose a good default, which is subject to change over time.
// The current platform default is OpenShift Engineering.
// The Author field is free form text.
// +optional
Author string `json:"author,omitempty"`
}This API is then explained by oc explain as:
RESOURCE: example <Object>
DESCRIPTION:
Example enables developers to understand how to write user facing documentation within the Godoc of their API types.
Example is used within the wider Conventions to improve the end user experience and is a required convention. At
least one value must be provided within the example and the type should be set appropriately.
FIELDS:
author <string>
Author allows the user to denote an author for the example convention. The author is not required. When omitted,
this means the user has no opinion and the value is left to the platform to choose a reasonable default, which is
subject to change over time. The current platform default is OpenShift Engineering. The Author field is free form
text.
convention <Object>
Convention allows the user to define the configuration for this API convention. For example, it allows them to set
the priority over other conventions and whether this policy should be strictly observed or weakly observed. When
this value is provided, the type must be set to either Convention or Mixed.
documentation <string>
Documentation allows the user to define documentation for the example. When this value is provided, the type must
be set to either Documentation or Mixed. The content of the documentation is free form text but must be no
longer than 512 characters.
type <string>
Type allows the user to determine how to interpret the example given. It must be set to one of the following
values: Documentation, Convention, or Mixed.By providing quality documentation within the API itself, a number of generated API references benefit from the additional context provided which in turn makes it easier for end users to understand and use our products.
In configuration APIs, we commonly have sections of the API model that are only valid to be configured in certain scenarios. A common example of this within OpenShift is platform specific configuration. When running on AWS, the other platform configuration blocks are not valid to be set. To model this within an API, we use a discriminated union, which models an at-most-one-of semantic with a declarative choice.
A discriminated union is a structure within the API that closely resembles a union type. A number of fields exist within the structure and we are expecting the user to configure precisely one of the fields.
In particular, for a discriminated union, an extra field exists which allows the user to declaratively state which of particular fields they are configuring.
We use discriminated unions in Kubernetes APIs so that we force the user to make a choice. We do not want our code to guess what the user meant, they should tell us which of the choices they made using the discriminant.
Union types in Go have some additional helper tags which signify how the structure should be handled to consumers. Below is an example based on the idea of platform types.
// MyPlatformConfig is a discriminated union of platform specific configuration.
// It has a +union tag which informs consumers that this is expected to be a union type.
// +union
type MyPlatformConfig struct {
// PlatformType is the unions discriminator.
// Users are expected to set this value to the name of the platform.
// The value of this field should match exactly one field in the union structure.
// It has a +unionDiscriminator tag to inform consumers that this is the discriminator field.
// The field should be an enum type, so you may also need an enum tag.
// The enum values should be in PascalCase.
// The field should be required.
// In configuration APIs, you may also want to allow an empty value or "NoOpinion" value to
// allow the consumer to declare that they do not have an opinion and that the platform
// should choose a sensible default on their behalf.
// +unionDiscriminator
// +kubebuilder:validation:Enum:="AWS";"Azure";"GCP"
// +kubebuilder:validation:Required
PlatformType string `json:"platformType,omitempty"`
// AWS is the AWS configuration.
// All structures within the union must be optional and pointers.
// +optional.
AWS *MyAWSConfig `json:"aws,omitempty"`
// Azure is the Azure configuration.
// All structures within the union must be optional and pointers.
// +optional.
Azure *MyAzureConfig `json:"azure,omitempty"`
// GCP is the GCP configuration.
// All structures within the union must be optional and pointers.
// +optional.
GCP *MyGCPConfig `json:"gcp,omitempty"`
}The discriminator here allows the consumer to determine which of the configuration structures they should be consuming, AWS, Azure or GCP.
Important to note:
- All structs within the union MUST be pointers
- All structs within the union MUST be optional
- The discriminant should be required
- The discriminant MUST be a string (or string alias) type
- Discriminant values should be PascalCase and should be equivalent to the camelCase field name (json tag) of one member of the union
- Empty union members (discriminant values without a paired union member) are also permitted
Below are some examples of how a user may configure the above example.
myPlatformConfig:
platformType: AWS
aws:
...This is valid. Only one struct is configured and the discriminant is correct.
myPlatformConfig:
platformType: AWS
aws:
...
azure:
...This is invalid. The Azure configuration should not be configured when the platformType is AWS.
myPlatformConfig:
aws:
...This is invalid. Only one struct is configured but the discriminant is omitted.
myPlatformConfig:
aws:
...
azure:
...This is invalid. Multiple structs have been configured and no discriminant is provided.
As both Kubernetes and OpenShift have a number of integrations with cloud and infrastructure platforms, there are a number of different abstractions built into OpenShift that abstract and extend infrastructure capabilities. For example, the Machine API or platform specific storage integrations within OpenShift.
These integrations often result in adding new API fields to OpenShift to allow users to configure various features of the platform. Often, different platform's concepts are similar, but their naming of particular features can be specific to their platform. If we copy verbatim the API from a platform, this may or may not be compliant with OpenShift conventions and may or may not make sense in a wider scope.
If we intend to support similar features across platforms, it is preferable to have similar APIs for these features within OpenShift rather than mimicking the platform API. This has the benefit of providing consistency to users when using OpenShift across multiple platforms and reducing the learning curve when installing OpenShift on a new platform. Where possible, we should link to the platform specific documentation for features in the description of our own APIs.
While we appreciate that reusing the platform specific terminology can make it easier for someone familiar with the platform to understand the API, we prefer to stick to Kubernetes style conventions (eg preferring PascalCase for enumerated values) when abstracting platform specific APIs as this allows us to build a consistent looking API across the OpenShift product. Differences between our APIs and platform APIs can be handled within the controller backing the API.
We have seen examples in the past where the value of a platform API is not intuitive to the value to the end user. When designing APIs for OpenShift we try to make it clear what the value is to an end user and what exactly will happen when they configure a particular field. Where platform APIs may talk about a feature in terms of the implementation, we should aim to talk about a feature in terms of the action that OpenShift and the platform will take. This is an easy way to help users understand the effects of their actions and provide additional value over them using the platform specific APIs directly.
Do not add functions to the openshift/api. Functions seem innocuous, but they have significant side effects over time.
- Dependency chain. We want our dependency chain on openshift/api to be as short as possible to avoid conflicts when they are vendored into other projects.
- Building interfaces on APIs.
Building interfaces on top of our structs is an anti-goal. Even the interfaces we have today,
runtime.Objectandmeta.Accessor, cause pain when mismatched levels result in structs dropping in and out of type compliance
The simplest line is "no functions". Functions can be added in a separate repo, possibly library-go if there are sufficient consumers. Helpers for accessing labels and annotations are not recommended.
Do not use annotations for extending an API. Annotations may seem as a good candidate for introducing experimental/new API. Nevertheless, migration from annotations to formal schema usually never happens as it requires breaking changes in customer deployments.
- Validation does not always come with definition. User set values can be too broad and hard to limit later on.
- Lack of discoverability. There's no pre-existing schema that can be published.
- Validation is limited. Certain kinds of validators aren't allowed on annotations, so hooks are more frequently used instead.
- Hard to extend. An annotation value (a string) can not be extended with additional fields under a parent.
- Unclear versioning. Annotation keys can omit versioning. Or, there are multiple ways to specify a version.
- Users can "squat" on annotations by adding an unvalidated annotation value for a key that is used in a future version.
Enabling HTTP Strict Transport Security (HSTS) policy through an annotation:
apiVersion: v1
kind: Route
metadata:
annotations:
haproxy.router.openshift.io/hsts_header: max-age=31536000;includeSubDomains;preloadThe annotation was introduced in OpenShift 3.X. At the time annotations were very popular as a means to provide experimental configuration. Nevertheless, after customer adoption the configuration was never migrated to a formal schema to avoid breaking changes.
Ensure that the godoc for a field name matches the JSON name, not the Go name, in Go definitions for API objects. In particular, this means that the godoc for field names should use an initial lower-case letter. For example, don't do the following:
// Example is [...]
type Example struct {
// ExampleFieldName specifies [...].
ExampleFieldName int32 `json:"exampleFieldName"`
}Instead, do the following:
// Example is [...]
type Example struct {
// exampleFieldName specifies [...].
ExampleFieldName int32 `json:"exampleFieldName"`
}The godoc for API objects appears in generated API documentation and oc explain output. Following this convention has the disadvantage that the godoc
does not match the Go definitions that developers use, but it has the advantage
that generated API documentation and oc explain output show the correct field
names that end users use, and the end-user experience is more important.
Use resource-specific types for object references. For example, avoid using the
generic ObjectReference type; instead, use a more specific type, such as
ConfigMapNameReference or ConfigMapFileReference (defined in
github.com/openshift/api/config/v1).
If necessary, define a new type and use it. Omit the "Ref" suffix in the field
name. For example, don't do the following:
// Example is [...]
type Example struct {
// FrobulatorConfigRef specifies [...].
FrobulatorConfigRef corev1.LocalObjectReference `json:"frobulatorConfigRef"`
// DefabulatorRef specifies [...].
DefabulatorRef corev1.LocalObjectReference `json:"defabulatorRef"`
}Instead, do the following:
// Example is [...].
type Example struct {
// frobulatorConfig specifies [...].
FrobulatorConfig configv1.ConfigMapNameReference `json:"frobulatorConfig"`
// defabulator specifies [...].
Defabulator LocalDefabulatorReference `json:"defabulator"`
}
// LocalDefabulatorReference references a defabulator.
type LocalDefabulatorReference struct {
// name is the metadata.name of the referenced defabulator object.
// +kubebuilder:validation:Required
// +required
Name string `json:"name"`
}Following this convention has the disadvantage that API developers may need to define additional types. However, using custom types has the advantage that the types can have context-specific godoc that is more useful to the end-user than the generic boilerplate of the generic types.
Use resource names rather than kinds for object references. For example, don't do the following:
// DefabulatorReference references a defabulator.
type DefabulatorReference struct {
// APIVersion is the API version of the referent.
APIVersion string `json:"apiVersion"`
// Kind of the referent.
Kind string `json:"kind"`
// Namespace of the referent.
Namespace string `json:"namespace"`
// Name of the referent.
Name string `json:"name"`
}Instead, do the following:
// DefabulatorReference references a defabulator [...]
type DefabulatorReference struct {
// group of the referent.
// +kubebuilder:validation:Required
// +required
Group string `json:"group"`
// resource of the referent.
// +kubebuilder:validation:Required
// +required
Resource string `json:"resource"`
// namespace of the referent.
// +kubebuilder:validation:Required
// +required
Namespace string `json:"namespace"`
// name of the referent.
// +kubebuilder:validation:Required
// +required
Name string `json:"name"`
}Following this convention has the disadvantage that it deviates from what users may be accustomed to from upstream APIs, but it has the advantage that it avoids ambiguity and the need for API consumers to resolve an API version and kind to the resource group and name that identify the resource.
While the upstream Kubernetes conventions recommend thinking twice about using Booleans, they are explicitly forbidden within OpenShift APIs.
Many ideas start as a Boolean value, e.g. FooEnabled: true|false, but often evolve into needing 3, 4, or even more
states at some point during the API's lifetime.
As a Boolean value can only ever have 2 or in some cases 3 values (true, false, omitted when a pointer), we have
seen examples in which API authors have later added additional fields, paired with a Boolean field, that are only
meaningful when the original field has a certain state. This makes it confusing for an end user as they have to be
aware that the field they are trying to use only has an effect in certain circumstances.
Rather than creating a Boolean field:
// authenticationEnabled determines whether authentication should be enabled or disabled.
// When omitted, this means the platform can choose a reasonable default.
// +optional
AuthenticationEnabled *bool `json:"authenticationEnabled,omitempty"`Use an enumeration of values that describe the action instead:
// authentication determines the requirements for authentication within the cluster. Allowed values are "Optional",
// "Required", "Disabled" and omitted.
// Optional authentication allows users to optionally authenticate but will not reject an unauthenticated request.
// Required authentication requires all requests to be authenticated.
// Disabled authentication ignores any attempt to authenticate and processes all requests as unauthenticated.
// When omitted, the authentication will be Optional. This default is subject to change over time.
// +kubebuilder:validation:Enum:=Optional;Required;Disabled;""
// +optional
Authentication AuthenticationPolicy `json:authentication,omitempty`With this example, we have described through the enumerated values the action that the API will have.
Should the API need to evolve in the future, for example to add a particular method of Authentication that should be
used, we can do so by adding a new value (e.g. PublicKey) to the enumeration and avoid adding a new field to the API.
In configuration APIs, we do not follow the upstream guidance of making optional fields pointers. Pointers are difficult to work with and are more error prone than references, and they also harm the discoverability of the API.
This topic is expanded in the Pointers subsection of the Configuration vs Workload APIs above.
When new API resources or new API fields are added as TechPreviewNoUpgrade, OpenShift has schema generation extensions that allow generating multiple manifests for the same golang struct for TechPreviewNoUpgrade versus Default.
See also
- FeatureSets in openshift/api.
- CVO conditional manifests in openshift/enhancements.
- Process for declaring a feature Accessible-by-default
This capability is important to use because it requires users to opt-in for TechPreview functionality on their cluster and prevents the accidental usage of TechPreview fields and types on production clusters.
To support TechPreview annotations and tags for your API group you will need to add new targets. Once you have added these targets, you can make use of the TechPreview generation.
$(call add-crd-gen,example,./example/v1,./example/v1,./example/v1)
$(call add-crd-gen-for-featureset,example,./example/v1,./example/v1,./example/v1,TechPreviewNoUpgrade)
$(call add-crd-gen-for-featureset,example,./example/v1,./example/v1,./example/v1,Default)
$(call add-crd-gen,example-alpha,./example/v1alpha1,./example/v1alpha1,./example/v1alpha1)See the openshift/api example.
If you're creating an entirely new CRD manifest and the CVO installs your CRD manifest, adding this annotation will tell the CVO to only create your manifest if the cluster is using TechPreviewNoUpgrade.
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
release.openshift.io/feature-set: TechPreviewNoUpgradeSee the openshift/api example.
If you're adding a TechPreview field to an existing CRD, you will have to create two yaml files, one for running in Default and one for running in TechPreviewNoUpgrade. By convention they are named
<normal-name>-default.crd.yaml with content
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
release.openshift.io/feature-set: Defaultand
<normal-name>-techpreview.crd.yaml with content
apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
annotations:
release.openshift.io/feature-set: TechPreviewNoUpgradeThen in your golang struct, you add a comment tag // +openshift:enable:FeatureSets=TechPreviewNoUpgrade
type StableConfigTypeSpec struct {
// coolNewField is a field that is for tech preview only. On normal clusters this shouldn't be present
//
// +kubebuilder:validation:Optional
// +openshift:enable:FeatureSets=TechPreviewNoUpgrade
// +optional
CoolNewField string `json:"coolNewField"`
}The generator will generate the coolNewField into <normal-name>-techpreview.crd.yaml, but not into <normal-name>-default.crd.yaml.
See the openshift/api example.
Often you need to add a value to an enumeration. This comes up frequently for the discriminator field in discriminated unions.
To do this, you will use the // +openshift:validation:FeatureSetAwareEnum:featureSet tag.
type EvolvingUnion struct {
// type is the discriminator. It has different values for Default and for TechPreviewNoUpgrade
Type EvolvingDiscriminator `json:"type"`
}
// EvolvingDiscriminator defines the audit policy profile type.
// +openshift:validation:FeatureSetAwareEnum:featureSet=Default,enum="";StableValue
// +openshift:validation:FeatureSetAwareEnum:featureSet=TechPreviewNoUpgrade,enum="";StableValue;TechPreviewOnlyValue
type EvolvingDiscriminator string
const (
// "StableValue" is always present.
StableValue EvolvingDiscriminator = "StableValue"
// "TechPreviewOnlyValue" should only be allowed when TechPreviewNoUpgrade is set in the cluster
TechPreviewOnlyValue EvolvingDiscriminator = "TechPreviewOnlyValue"
)The generator will generate the TechPreviewOnlyValue into <normal-name>-techpreview.crd.yaml, but not into <normal-name>-default.crd.yaml.
See the openshift/api example.
There are a few reasons why an API reviewer might want you to change the proposed design of your API addition.
When the API looks similar to an existing API, there are a couple of important things to bear in mind.
Firstly, not all APIs in OpenShift have been through the API review process, therefore, especially early in the OpenShift 4 lifecycle, many APIs were shipped that were not compliant with the conventions.
Secondly, the conventions have evolved over time as we have learned what does and doesn't work. Naturally this means that older APIs are not compliant with current conventions.
Thirdly, the API review team is relatively small and API reviews can be very time consuming. During the review process, sometimes things are missed and lead to APIs being merged that aren't compliant.
No matter the reason for an existing API being non-compliant with current conventions, the reasons above are not sufficient justification for merging a new API that doesn't meet conventions. If your proposed API changes look like an existing API, but that API is not compliant, we will ask you to update the API to meet the latest conventions.
When adhered to the conventions prevent us from making API design mistakes or repeating them. As such, the existence of non-compliant APIs is not a justification for introducing additional non-compliant APIs.
Yes! When designing an API for an abstraction, you should consider the end user experience and the value your abstraction is providing. If you copy the API verbatim, are you adding any value?
If an upstream/platform API is not intuitive, we can improve the user experience by creating our own naming that better describes the effects of enabling a specific field with a specific value. Think about why a user would configure a field when choosing the name.
When writing APIs for OpenShift, we try to make our APIs consistent with one another and "Kube-like" so that users of OpenShift have an understanding of how to use our APIs intuitively. If an upstream API is not consistent with those conventions, you should be prepared to change your abstraction to follow conventions to maintain that consistent user experience within OpenShift.