Local Cluster Management

Overview
Getting Started
Persistent Volumes
Using a Proxy
Installing Metrics
Installing Logging Aggregation
Installing the Service Catalog
Administrator Access
Docker Machine
Configuration
Etcd Data
Routing
Specifying Images to Use
Accessing the OpenShift Registry Directly

Pre-requisites

NOTE
This command was released with the 1.3+ version of oc client tools, so you must be using version 1.3+ or newer for this command to work.

Overview

The oc cluster up command starts a local OpenShift all-in-one cluster with a configured registry, router, image streams, and default templates. By default, the command requires a working Docker connection. However, if running in an environment with Docker Machine installed, it can create a Docker machine for you.

The oc cluster up command will create a default user and project and, once it completes, will allow you to start using the command line to create and deploy apps with commands like oc new-app, oc new-build, and oc run. It will also print out a URL to access the management console for your cluster.

Getting Started

Linux

WARNING
The default Firewalld configuration on Fedora blocks access to ports needed by containers running on an OpenShift cluster. Make sure you grant access to these ports. See step 3 below.
Check that `sysctl net.ipv4.ip_forward` is set to 1.

Install Docker with your platform's package manager.
Configure the Docker daemon with an insecure registry parameter of 172.30.0.0/16
- In RHEL and Fedora, edit the /etc/sysconfig/docker file and add or uncomment the following line:
```
INSECURE_REGISTRY='--insecure-registry 172.30.0.0/16'
```
  or edit the /etc/docker/daemon.json file and add the following:
```
{
   "insecure-registries": [
     "172.30.0.0/16"
   ]
}
```
- After editing the config, reload systemd and restart the Docker daemon.
```
$ sudo systemctl daemon-reload
$ sudo systemctl restart docker
```

Ensure that your firewall allows containers access to the OpenShift master API (8443/tcp) and DNS (53/udp) endpoints. In RHEL and Fedora, you can create a new firewalld zone to enable this access:

Determine the Docker bridge network container subnet:
```
docker network inspect -f "{{range .IPAM.Config }}{{ .Subnet }}{{end}}" bridge
```
You should get a subnet like: 172.17.0.0/16

Create a new firewalld zone for the subnet and grant it access to the API and DNS ports:

firewall-cmd --permanent --new-zone dockerc
firewall-cmd --permanent --zone dockerc --add-source 172.17.0.0/16
firewall-cmd --permanent --zone dockerc --add-port 8443/tcp
firewall-cmd --permanent --zone dockerc --add-port 53/udp
firewall-cmd --permanent --zone dockerc --add-port 8053/udp
firewall-cmd --reload

Download the Linux oc binary from openshift-origin-client-tools-VERSION-linux-64bit.tar.gz and place it in your path.

Please be aware that the 'oc cluster' set of commands are only available in the 1.3+ or newer releases.
Open a terminal with a user that has permission to run Docker commands and run:
```
$ oc cluster up
```

If you are running oc cluster up on a virtual machine in Amazon AWS EC2, you should pass the public hostname and IP address to ensure that the cluster is reachable from your local host. You can retrieve this information from the internal meta-data endpoints:

$ metadata_endpoint="http://169.254.169.254/latest/meta-data"
$ public_hostname="$( curl "${metadata_endpoint}/public-hostname" )"
$ public_ip="$( curl "${metadata_endpoint}/public-ipv4" )"
$ oc cluster up --public-hostname="${public_hostname}" --routing-suffix="${public_ip}.nip.io"

To stop your cluster, run:

$ oc cluster down

MacOS with Docker for Mac

Install Docker for Mac making sure you meet the prerequisites.
Once Docker is running, add an insecure registry of 172.30.0.0/16:
- From the Docker menu in the toolbar, select Preferences...
- Click on Daemon in the preferences dialog (note: on some older versions of Docker for Mac this is under Advanced)
- Under Insecure registries:, click on the + icon to add a new entry
- Enter 172.30.0.0/16 and press return
- Click on Apply and Restart
Install socat
- If not already installed, install Homebrew for Mac
- Install socat Open Terminal and run:
```
$ brew install socat
```
Install the oc binary using homebrew with: brew install openshift-cli

OR

Download the Mac OS oc binary from openshift-origin-client-tools-VERSION-mac.zip and place it in your path.

Please be aware that the 'oc cluster' set of commands are only available in the 1.3+ or newer releases.
Open Terminal and run
```
$ oc cluster up
```

To stop your cluster, run:

$ oc cluster down

Mac OS X with Docker Toolbox

Install Docker Toolbox and ensure that it is functional.
Install the oc binary using homebrew with: brew install openshift-cli

OR

Download the OS X oc binary from openshift-origin-client-tools-VERSION-mac.zip and place it in your path.

Please be aware that the 'oc cluster' set of commands are only available in the 1.3+ or newer releases.
Open Terminal and run
```
$ oc cluster up --create-machine
```

A Docker machine named openshift will be created using the VirtualBox driver and the OpenShift cluster will be started on it.

To stop the cluster, run:

$ oc cluster down --docker-machine=openshift

To create a machine with a different name, specify the --docker-machine argument with --create-machine:

$ oc cluster up --create-machine --docker-machine=mymachine

Once the machine has been created, the --create-machine argument is no longer needed. To start/stop OpenShift again, either:

Setup the Docker environment for the machine you wish to use, and then run oc cluster up and oc cluster down:
```
$ eval $(docker-machine env openshift)
$ oc cluster up

...

$ oc cluster down
```
OR

Specify the Docker machine name as an argument to oc cluster up and oc cluster down:

$ oc cluster up --docker-machine=openshift

...

$ oc cluster down --docker-machine=openshift

Windows with Docker for Windows

Install Docker for Windows making sure you meet the prerequisites.
Once Docker is running, add an insecure registry of 172.30.0.0/16:
- Right click on the Docker icon in the notification area and select Settings...
- Click on Docker Daemon in the settings dialog
- Edit the Docker daemon configuration by adding "172.30.0.0/16" to the "insecure-registries": setting
```
{
  "registry-mirrors": [],
  "insecure-registries": [ "172.30.0.0/16" ]
}
```
- Click on Apply and Docker will restart
Download the Windows oc.exe binary from openshift-origin-client-tools-VERSION-windows.zip and place it in your path.

Please be aware that the 'oc cluster' set of commands are only available in the 1.3+ or newer releases.
Open a Command window as Administrator and run:
```
C:\> oc cluster up
```

To stop the cluster, run:

C:\> oc cluster down

Windows with Docker Toolbox

Install Docker Toolbox and ensure that it is functional.
Download the Windows oc.exe binary from openshift-origin-client-tools-VERSION-windows.zip and place it in your path.

Please be aware that the 'oc cluster' set of commands are only available in the 1.3+ or newer releases.
Open a Command window as Administrator (for most drivers, docker-machine on Windows requires administrator privileges) and run:
```
C:\> oc cluster up --create-machine
```

A Docker machine named openshift will be created using the VirtualBox driver and the OpenShift cluster will be started on it.

To stop the cluster, run:

C:\> oc cluster down --docker-machine=openshift

To create a machine with a different name, specify the --docker-machine argument with --create-machine:

C:\> oc cluster up --create-machine --docker-machine=mymachine

Once the machine has been created, the --create-machine argument is no longer needed. To start/stop OpenShift again, either:

Setup the Docker environment for the machine you wish to use, and then run oc cluster up and oc cluster down:

C:\> @FOR /f "tokens=*" %i IN ('docker-machine env openshift') DO @%i
C:\> oc cluster up

...

C:\> oc cluster down

Specify the Docker machine name as an argument to oc cluster up and oc cluster down:

C:\> oc cluster up --docker-machine=openshift

...

C:\> oc cluster down --docker-machine=openshift

Persistent Volumes

(Available starting origin release 1.5.0-alpha.2) Cluster up creates a set of persistent volumes by default. It exposes a new flag that allows setting the directory on the host for these volumes (--host-pv-dir). The registry and templates for databases and jenkins will now default to persistent storage.

Using a Proxy

Cluster up flags

Available starting origin release 1.5.0-alpha.2

Cluster up supports the following flags to specify a proxy:

--http-proxy set to URL of HTTP proxy to use
--https-proxy set to URL of HTTPS proxy to use
--no-proxy specify a comma-separated list of hosts to not proxy. Cluster up automatically adds a set of hosts to this list such as the current hostname and the docker registry IP

Docker Settings

Your Docker settings should mirror the cluster up settings for HTTP and HTTPS proxy. And if you do specify either of these, You should at least add the registry service IP (172.30.1.1) to the Docker daemon's NO_PROXY environment variable. How these settings are specified will vary depending on your platform. Both Docker for Windows and Docker for Mac provide a settings GUI for specifying a proxy. On RHEL or Fedora, you can add HTTP_PROXY, HTTPS_PROXY, and NO_PROXY variables to /etc/sysconfig/docker (or /etc/sysconfig/docker-latest depending on which service you're using). Cluster up will warn you if there is a discrepancy between the Docker settings and the arguments you specify for cluster up.

WARNING
On Docker for Windows, if you specify proxy settings for Docker in its GUI, Docker will apply those settings to every container that is run on the daemon. This requires that you specifically exclude any services that could be accessed container to container (172.30.0.0/16). You can do this by going to Docker Settings -> Proxies and entering the subnet you want to exclude in the 'Bypass' text box.

Installing Metrics

You can install metrics components by specifying the --metrics argument when invoking oc cluster up.

To see metrics in the web console, you must first browse to the Hawkular metrics UI URL displayed when cluster up starts.

Installing Logging Aggregation

NOTE
This feature requires an oc command v1.4 or newer

You can install logging aggregation components by specifying the --logging argument when invoking oc cluster up.

With logging aggregation installed, a new link will appear in the logs tab of a running pod in the web console.

Installing the Service Catalog

NOTE
This feature requires an oc command v3.6 or newer.
Enabling this feature renders the entire cluster "Tech Preview".

You can enable the service catalog component by specifying the --service-catalog argument when invoking oc cluster up.

Enabling the service catalog has the following effect:

The API aggregator is enabled to provide a unified API endpoint for both OpenShift/Kubernetes resources and the new APIs introduced by the service catalog.
A service catalog deployment is created to deploy and run the service catalog.
The template broker is enabled in the OpenShift master server and registered with the service catalog.
The web console is configured to use the new service catalog landing page.

On completion, oc cluster up will output a command that you may run if you want to use the template broker with the service catalog. CAUTION: running this command has significant adverse security effects as it enables unauthenticated access to the template broker. This allows anyone who can access your master to provision templates into any project as any user.

The service catalog can be used without the template broker, however no other brokers are provided out of the box with oc cluster up (though they can be registered with the service catalog manually).

Administrator Access

To login as administrator to your cluster, login as system:admin:

oc login -u system:admin

Cluster administration commands are available under oc adm

To return to the regular developer user, login as that user:

oc login -u developer

Docker Machine

By default, when --create-machine is used to create a new Docker machine, the oc cluster up command will use the VirtualBox driver. In order to use a different driver, you must create the Docker machine beforehand and either specify its name with the --docker-machine argument, or set its environment using the docker-machine env command. When creating a Docker machine manually, you must specify the --engine-insecure-registry argument with the value expected by OpenShift.

Following are examples of creating a new Docker machine in OS X using the xhyve driver, and in Windows, using the hyper-v driver.

OS X:

$ docker-machine create --driver xhyve --engine-insecure-registry 172.30.0.0/16 mymachine

Windows (running a command window as Administrator):

C:\> docker-machine create --driver hyperv --engine-insecure-registry 172.30.0.0/16 mymachine

When the --docker-machine argument is specified on oc cluster up, the machine's environment does not need to be configured on the current shell. Also if the machine exists but is not started, oc cluster up will attempt to start it.

Configuration

oc cluster up creates its configuration by default in /var/lib/origin/openshift.local.config on the Docker host. To specify a different location for it, use the --host-config-dir argument. The host directory will be mounted in the origin container at /var/lib/origin/openshift.local.config.

A new configuration will be generated by default each time the cluster is started. To make changes to the configuration and preserve those changes, use the --use-existing-config argument when starting your cluster.

If your client is not the Docker host, you can make a local copy of the configuration with Docker cp:

docker cp origin:/var/lib/origin/openshift.local.config .

Etcd Data

To persist data across restarts, specify a valid host directory in the --host-data-dir argument when starting your cluster with oc cluster up. As long as the same value is specified every time, the data will be preserved across restarts.

If a host data directory is not specified, the data directory used by OpenShift is discarded when the container is destroyed.

Routing

The default routing suffix used by oc cluster up is CLUSTER_IP.nip.io where CLUSTER_IP is the IP address of your cluster. To use a different suffix, specify it with --routing-suffix.

Specifying Images to Use

By default oc cluster up uses openshift/origin:[released-version] as its OpenShift image (where [released-version] corresponds to the release of the oc client) and openshift-origin-${component}:[released-version] for other images created by the OpenShift cluster (registry, router, builders, etc). It is possible to use a different set of images by specifying the version and/or the image prefix.

To use a different version of Origin, specify the --version argument. In the following example, images named openshift/origin:v1.1.6, openshift/origin-router:v1.1.6, etc. will be used for your cluster.

oc cluster up --version=v1.1.6

To use images from a different registry or with a different namespace, use the --image argument. In the following example, myregistry.example.com/ose/origin:latest, myregistry.example.com/ose/origin-router:latest, etc. will be used for your cluster.

oc cluster up --image=myregistry.example.com/ose/origin

Both --version and --image may be combined to specify the image name prefix and tag for the images to use.

Accessing the OpenShift Registry Directly

On cluster startup, cluster up creates an OpenShift registry by default. The registry can be accessed directly via docker commands by using its service IP address.

Starting with release v1.5.0-alpha.2, the service IP of the registry is fixed at 172.30.1.1

To determine the service IP of the registry (if using a client prior to v1.5.0-alpha.2):

Login as system:admin
```
oc login -u system:admin
```
Get the registry service from the default namespace
```
oc get svc docker-registry -n default
```
Log back in as your regular user
```
oc login -u developer
```

To push arbitrary images from your local Docker daemon to this registry, you will need to:

Obtain your OpenShift token and store it in a variable
```
OPENSHIFT_TOKEN=$(oc whoami -t)
```
Login to the registry (Substitute the registry service IP for 172.30.1.1 if different on your system)
```
docker login -u developer -p ${OPENSHIFT_TOKEN} 172.30.1.1:5000
```
Tag an image with your registry and namespace, and push it.

An image tag must be of the format REGISTRY_IP:5000/NAMESPACE/name[:TAG]

where REGISTRY_IP is the IP of your registry, NAMESPACE is an OpenShift namespace that you have access to, and TAG is an optional tag that you want to create for the image.

After an image is pushed, an ImageStream is automatically created for it in the namespace that you used to tag it.

Following is an example of pulling an nginx image and pushing it to your local namespace
```
docker pull nginx:latest
docker tag nginx:latest 172.30.1.1:5000/myproject/nginx:latest
docker push 172.30.1.1:5000/myproject/nginx:latest
```
After the image is pushed to the local registry, an ImageStream named nginx will be created in the myproject namespace.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

cluster_up_down.md

cluster_up_down.md

Local Cluster Management

Pre-requisites

Overview

Getting Started

Linux

MacOS with Docker for Mac

Mac OS X with Docker Toolbox

Windows with Docker for Windows

Windows with Docker Toolbox

Persistent Volumes

Using a Proxy

Installing Metrics

Installing Logging Aggregation

Installing the Service Catalog

Administrator Access

Docker Machine

Configuration

Etcd Data

Routing

Specifying Images to Use

Accessing the OpenShift Registry Directly

Files

cluster_up_down.md

Latest commit

History

cluster_up_down.md

File metadata and controls

Local Cluster Management

Pre-requisites

Overview

Getting Started

Linux

MacOS with Docker for Mac

Mac OS X with Docker Toolbox

Windows with Docker for Windows

Windows with Docker Toolbox

Persistent Volumes

Using a Proxy

Installing Metrics

Installing Logging Aggregation

Installing the Service Catalog

Administrator Access

Docker Machine

Configuration

Etcd Data

Routing

Specifying Images to Use

Accessing the OpenShift Registry Directly