Skip to content

Latest commit

 

History

History
120 lines (76 loc) · 3.32 KB

generic-driver.rst

File metadata and controls

120 lines (76 loc) · 3.32 KB
Raw

Generic approach for share provisioning

The Shared File Systems service can be configured to use Compute VMs and Block Storage service volumes. There are two modules that handle them in the Shared File Systems service:

  • The service_instance module creates VMs in Compute with a predefined image called service image. This module can be used by any driver for provisioning of service VMs to be able to separate share resources among tenants.
  • The generic module operates with Block Storage service volumes and VMs created by the service_instance module, then creates shared filesystems based on volumes attached to VMs.

Network configurations

Each driver can handle networking in its own way, see: https://wiki.openstack.org/wiki/manila/Networking.

One of the two possible configurations can be chosen for share provisioning using the service_instance module:

  • Service VM has one network interface from a network that is connected to a public router. For successful creation of a share, the user network should be connected to a public router, too.
  • Service VM has two network interfaces, the first one is connected to the service network, the second one is connected directly to the user's network.

Requirements for service image

  • Linux based distro
  • NFS server
  • Samba server >= 3.2.0, that can be configured by data stored in registry
  • SSH server
  • Two network interfaces configured to DHCP (see network approaches)
  • exportfs and net conf libraries used for share actions
  • The following files will be used, so if their paths differ one needs to create at least symlinks for them:
    • /etc/exports: permanent file with NFS exports.
    • /var/lib/nfs/etab: temporary file with NFS exports used by exportfs.
    • /etc/fstab: permanent file with mounted filesystems.
    • /etc/mtab: temporary file with mounted filesystems used by mount.

Supported shared filesystems and operations

The driver supports CIFS and NFS shares.

The following operations are supported:

  • Create a share.

  • Delete a share.

  • Allow share access.

    Note the following limitations:

    • Only IP access type is supported for NFS and CIFS.

  • Deny share access.

  • Create a snapshot.

  • Delete a snapshot.

  • Create a share from a snapshot.

  • Extend a share.

  • Shrink a share.

Known restrictions

  • One of nova's configurations only allows 26 shares per server. This limit comes from the maximum number of virtual PCI interfaces that are used for block device attaching. There are 28 virtual PCI interfaces, in this configuration, two of them are used for server needs and the other 26 are used for attaching block devices that are used for shares.

Using Windows instances

While the generic driver only supports Linux instances, you may use the Windows SMB driver when Windows instances are preferred.

For more details, please check out the following page: :ref:`windows_smb_driver`.

Driver options

The following table contains the configuration options specific to this driver.