ml2.pp

#
# Copyright (C) 2013 eNovance SAS <licensing@enovance.com>
#
# Author: Emilien Macchi <emilien.macchi@enovance.com>
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.

# Configure the neutron server to use the ML2 plugin.
# This configures the plugin for the API server, but does nothing
# about configuring the agents that must also run and share a config
# file with the OVS plugin if both are on the same machine.
#
# === Parameters
#
# [*type_drivers*]
#   (optional) List of network type driver entrypoints to be loaded
#   from the neutron.ml2.type_drivers namespace.
#   Could be an array that can have these elements:
#   local, flat, vlan, gre, vxlan, geneve
#   Defaults to ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve'].
#
# [*extension_drivers*]
#   (optional) Ordered list of extension driver entrypoints to be loaded
#   from the neutron.ml2.extension_drivers namespace.
#   Defaults to $::os_service_default
#
# [*tenant_network_types*]
#   (optional) Ordered list of network_types to allocate as tenant networks.
#   The value 'local' is only useful for single-box testing
#   but provides no connectivity between hosts.
#   Should be an array that can have these elements:
#   local, flat, vlan, gre, vxlan
#   Defaults to ['local', 'flat', 'vlan', 'gre', 'vxlan'].
#
# [*mechanism_drivers*]
#   (optional) An ordered list of networking mechanism driver
#   entrypoints to be loaded from the neutron.ml2.mechanism_drivers namespace.
#   Should be an array that can have these elements:
#   logger, test, linuxbridge, openvswitch, hyperv, ncs, arista, cisco_nexus,
#   l2population, sriovnicswitch
#   Default to ['openvswitch', 'linuxbridge'].
#
# [*flat_networks*]
#   (optional) List of physical_network names with which flat networks
#   can be created. Use * to allow flat networks with arbitrary
#   physical_network names.
#   Should be an array.
#   Default to *.
#
# [*network_vlan_ranges*]
#   (optional) List of <physical_network>:<vlan_min>:<vlan_max> or
#   <physical_network> specifying physical_network names
#   usable for VLAN provider and tenant networks, as
#   well as ranges of VLAN tags on each available for
#   allocation to tenant networks.
#   Should be an array with vlan_min = 1 & vlan_max = 4094 (IEEE 802.1Q)
#   Default to 'physnet1:1000:2999'.
#
# [*tunnel_id_ranges*]
#   (optional) Comma-separated list of <tun_min>:<tun_max> tuples
#   enumerating ranges of GRE tunnel IDs that are
#   available for tenant network allocation
#   Should be an array with tun_max +1 - tun_min > 1000000
#   Default to '20:100'.
#
# [*vxlan_group*]
#   (optional) Multicast group for VXLAN.
#   Multicast group for VXLAN. If unset, disables VXLAN enable sending allocate
#   broadcast traffic to this multicast group. When left unconfigured, will
#   disable multicast VXLAN mode
#   Should be an Multicast IP (v4 or v6) address.
#   Default to '224.0.0.1'.
#
# [*vni_ranges*]
#   (optional) Comma-separated list of <vni_min>:<vni_max> tuples
#   enumerating ranges of VXLAN VNI IDs that are
#   available for tenant network allocation.
#   Min value is 0 and Max value is 16777215.
#   Default to '10:100'.
#
# [*enable_security_group*]
#   (optional) Controls if neutron security group is enabled or not.
#   It should be false when you use nova security group.
#   Defaults to $::os_service_default.
#
# [*firewall_driver*]
#   (optional) Firewall driver for realizing neutron security group function.
#   Defaults to $::os_service_default
#
# [*package_ensure*]
#   (optional) Ensure state for package.
#   Defaults to 'present'.
#
# [*physical_network_mtus*]
#   (optional) For L2 mechanism drivers, per-physical network MTU setting.
#   Should be an array with 'physnetX1:9000'.
#   Defaults to $::os_service_default.
#
# [*path_mtu*]
#   (optional) For L3 mechanism drivers, determines the maximum permissible
#   size of an unfragmented packet travelling from and to addresses where
#   encapsulated traffic is sent.
#   Defaults to 0.
#
# [*purge_config*]
#   (optional) Whether to set only the specified config options
#   in the ml2 config.
#   Defaults to false.
#
# [*max_header_size*]
#   (optional) Geneve encapsulation header size is dynamic, this value is used to calculate
#   the maximum MTU for the driver.
#   Defaults to $::os_service_default
#
# [*overlay_ip_version*]
#   (optional) Configures the IP version used for all overlay network endpoints. Valid values
#   are 4 and 6.
#   Defaults to $::os_service_default
#
class neutron::plugins::ml2 (
  $type_drivers              = ['local', 'flat', 'vlan', 'gre', 'vxlan', 'geneve'],
  $extension_drivers         = $::os_service_default,
  $tenant_network_types      = ['local', 'flat', 'vlan', 'gre', 'vxlan'],
  $mechanism_drivers         = ['openvswitch', 'linuxbridge'],
  $flat_networks             = '*',
  $network_vlan_ranges       = 'physnet1:1000:2999',
  $tunnel_id_ranges          = '20:100',
  $vxlan_group               = '224.0.0.1',
  $vni_ranges                = '10:100',
  $enable_security_group     = $::os_service_default,
  $firewall_driver           = $::os_service_default,
  $package_ensure            = 'present',
  $physical_network_mtus     = $::os_service_default,
  $path_mtu                  = 0,
  $purge_config              = false,
  $max_header_size           = $::os_service_default,
  $overlay_ip_version        = $::os_service_default,
) {

  include ::neutron::deps
  include ::neutron::params

  if ! $mechanism_drivers {
    warning('Without networking mechanism driver, ml2 will not communicate with L2 agents')
  }

  if !is_service_default($enable_security_group) and $enable_security_group and is_service_default($firewall_driver) {
    warning('Security groups will not work without properly set firewall_driver')
  }

  if !is_service_default($overlay_ip_version) and !("${overlay_ip_version}" in ['4', '6']) {
    fail('Invalid IP version for overlay_ip_version')
  }

  if $::operatingsystem == 'Ubuntu' {
    file_line { '/etc/default/neutron-server:NEUTRON_PLUGIN_CONFIG':
      path  => '/etc/default/neutron-server',
      match => '^NEUTRON_PLUGIN_CONFIG=(.*)$',
      line  => 'NEUTRON_PLUGIN_CONFIG=/etc/neutron/plugin.ini',
      tag   => 'neutron-file-line'
    }
  }

  # In RH, the link is used to start Neutron process but in Debian, it's used only
  # to manage database synchronization.
  file {'/etc/neutron/plugin.ini':
    ensure => link,
    target => '/etc/neutron/plugins/ml2/ml2_conf.ini',
    tag    => 'neutron-config-file',
  }
  file {'/etc/default/neutron-server':
    ensure => present,
    owner  => 'root',
    group  => 'root',
    mode   => '0644',
    tag    => 'neutron-config-file',
  }

  # Some platforms do not have a dedicated ml2 plugin package
  if $::neutron::params::ml2_server_package {
    package { 'neutron-plugin-ml2':
      ensure => $package_ensure,
      name   => $::neutron::params::ml2_server_package,
      tag    => ['neutron-package', 'openstack'],
    }
  }

  resources { 'neutron_plugin_ml2':
    purge => $purge_config,
  }

  neutron::plugins::ml2::type_driver { $type_drivers:
    flat_networks       => $flat_networks,
    tunnel_id_ranges    => $tunnel_id_ranges,
    network_vlan_ranges => $network_vlan_ranges,
    vni_ranges          => $vni_ranges,
    vxlan_group         => $vxlan_group,
    max_header_size     => $max_header_size
  }

  neutron_plugin_ml2 {
    'ml2/type_drivers':                     value => join(any2array($type_drivers), ',');
    'ml2/tenant_network_types':             value => join(any2array($tenant_network_types), ',');
    'ml2/mechanism_drivers':                value => join(any2array($mechanism_drivers), ',');
    'ml2/path_mtu':                         value => $path_mtu;
    'ml2/extension_drivers':                value => join(any2array($extension_drivers), ',');
    'ml2/overlay_ip_version':               value => $overlay_ip_version;
    'securitygroup/enable_security_group':  value => $enable_security_group;
    'securitygroup/firewall_driver':        value => $firewall_driver;
  }

  if is_service_default($physical_network_mtus) {
    neutron_plugin_ml2 {
      'ml2/physical_network_mtus': ensure => absent;
    }
  } else {
    validate_array($physical_network_mtus)
    neutron_plugin_ml2 {
      'ml2/physical_network_mtus': value => join($physical_network_mtus, ',');
    }
  }
}