You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Dec 21, 2017. It is now read-only.
I have 3 different touch which are different makes and models that I have been trying to test with OTC. Connecting them through RS-232 works if I manually set the calibration in OTC with the MINx MAXx MINy MAXy which is just trial and error till you get it perfect. So I tried connecting the touch screens through USB. When connected through USB I can not move the cursor on the screen. But if I touch the screen it will perform a mouse click in the position that the cursor is in but the cursor never moves. I tried using \usr\share\evtouch\calibrate.sh with the serial connection which gives me a 2000, 0 , 2000, 0 for min max and seems to freeze. When connected through USB I get no reading at all. One touch screen is a off brand, another is made for evtouch driver and the other for elographics driver. All with the same issue. When using USB I have tried assigning the device in OTC such as Device: /dev/usb/004/002 but changes nothing. Any help would be greatly appreciated.
The text was updated successfully, but these errors were encountered:
Please use the mailinglist to discuss best practices, as this is the issue tracker for the openthinclient-suite aka the java components of the openthinclient software stack
I have 3 different touch which are different makes and models that I have been trying to test with OTC. Connecting them through RS-232 works if I manually set the calibration in OTC with the MINx MAXx MINy MAXy which is just trial and error till you get it perfect. So I tried connecting the touch screens through USB. When connected through USB I can not move the cursor on the screen. But if I touch the screen it will perform a mouse click in the position that the cursor is in but the cursor never moves. I tried using \usr\share\evtouch\calibrate.sh with the serial connection which gives me a 2000, 0 , 2000, 0 for min max and seems to freeze. When connected through USB I get no reading at all. One touch screen is a off brand, another is made for evtouch driver and the other for elographics driver. All with the same issue. When using USB I have tried assigning the device in OTC such as Device: /dev/usb/004/002 but changes nothing. Any help would be greatly appreciated.
The text was updated successfully, but these errors were encountered: