mt7621_tplink_rexx0-v1.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	aliases {
		label-mac-device = &gmac0;
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
	};

	keys {
		compatible = "gpio-keys";

		wps {
			label = "wps";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		power {
			label = "power";
			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
			linux,code = <KEY_POWER>;
		};

		led {
			label = "led";
			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
			linux,code = <KEY_LIGHTS_TOGGLE>;
		};

		reset {
			label = "reset";
			gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			function = LED_FUNCTION_POWER;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
		};

		wifi2g {
			label = "blue:wifi2g";
			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		wifi5g {
			label = "blue:wifi5g";
			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};

		wps_red {
			function = LED_FUNCTION_WPS;
			color = <LED_COLOR_ID_RED>;
			gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
		};

		wps_blue {
			function = LED_FUNCTION_WPS;
			color = <LED_COLOR_ID_BLUE>;
			gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
		};

		eth_act {
			label = "green:eth_act";
			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
		};

		eth_link {
			label = "green:eth_link";
			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
		};
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x20000>;
				read-only;
			};

			partition@20000 {
				compatible = "tplink,firmware";
				label = "firmware";
				reg = <0x20000 0xde0000>;
			};

			partition@e00000 {
				label = "config";
				reg = <0xe00000 0x50000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_config_10008: macaddr@10008 {
						compatible = "mac-base";
						reg = <0x10008 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			/* range 0xe50000 to 0xff0000 is empty in vendor
			 * firmware, so we do not use it either
			 */

			partition@ff0000 {
				label = "radio";
				reg = <0xff0000 0x10000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					eeprom_radio_0: eeprom@0 {
						reg = <0x0 0x4da8>;
					};

					eeprom_radio_8000: eeprom@8000 {
						reg = <0x8000 0x4da8>;
					};
				};
			};
		};
	};
};

&state_default {
	gpio {
		groups = "rgmii2", "wdt";
		function = "gpio";
	};
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_radio_0>, <&macaddr_config_10008 1>;
		nvmem-cell-names = "eeprom", "mac-address";
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_radio_8000>, <&macaddr_config_10008 2>;
		nvmem-cell-names = "eeprom", "mac-address";
		ieee80211-freq-limit = <5000000 6000000>;
	};
};

&ethernet {
	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
};

&gmac0 {
	nvmem-cells = <&macaddr_config_10008 0>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@0 {
			status = "okay";
			label = "lan";
		};
	};
};