Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

ath10k: 5 GHz radio not detected. #14541

Open
1 task done
castillofrancodamian opened this issue Feb 2, 2024 · 14 comments
Open
1 task done

ath10k: 5 GHz radio not detected. #14541

castillofrancodamian opened this issue Feb 2, 2024 · 14 comments
Labels
bug issue report with a confirmed bug Self Built Image SNAPSHOT Supported Device target/ath79 pull request/issue for ath79 target

Comments

@castillofrancodamian
Copy link

castillofrancodamian commented Feb 2, 2024 •
edited

Describe the bug

After upgrading to a newer snapshot, the 5 GHz radio is not detected. I think this commit generates the problem.

OpenWrt version

r24969-44cd90c49a

OpenWrt release

SNAPSHOT

OpenWrt target/subtarget

ath79/generic

Device

TP-Link Archer C60 v1

Image kind

Self-built image

Steps to reproduce

No response

Actual behaviour

When doing rm /etc/config/wireless and wifi config, radio0, which corresponds to the 5 GHz radio, does not appear in the configuration file.

Expected behaviour

No response

Additional info

Result when deleting the configuration file and wifi config.

root@archer-c60:~# cat /etc/config/wireless 

config wifi-device 'radio0'
        option type 'mac80211'
        option path 'platform/ahb/18100000.wmac'
        option channel '1'
        option band '2g'
        option htmode 'HT20'
        option disabled '1'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option ssid 'OpenWrt'
        option encryption 'none'

root@archer-c60:~# logread | grep ath10k
Fri Feb  2 02:47:02 2024 kern.info kernel: [   11.985063] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
Fri Feb  2 02:47:02 2024 kern.info kernel: [   11.991903] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
Fri Feb  2 02:47:02 2024 kern.info kernel: [   15.193583] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
Fri Feb  2 02:47:02 2024 kern.info kernel: [   15.203157] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
Fri Feb  2 02:47:02 2024 kern.info kernel: [   15.223415] ath10k_pci 0000:00:00.0: firmware ver 10.4-3.9.0.2-00157 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,iram-recovery crc32 812c4602
Fri Feb  2 02:47:02 2024 kern.err kernel: [   15.552754] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
Fri Feb  2 02:47:02 2024 kern.err kernel: [   16.018223] ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
Fri Feb  2 02:47:02 2024 kern.err kernel: [   16.027987] ath10k_pci 0000:00:00.0: failed to fetch board file: -12
Fri Feb  2 02:47:02 2024 kern.err kernel: [   16.050879] ath10k_pci 0000:00:00.0: could not probe fw (-12)
.manifest 

ath10k-board-qca9888 - 20231211-2
ath10k-firmware-qca9888 - 20231211-2
base-files - 1561-r24969-44cd90c49a
busybox - 1.36.1-1
cgi-io - 2022-08-10-901b0f04-21
dnsmasq - 2.89-7
dropbear - 2022.82-5
firewall4 - 2023-11-03-698a5335-1
fstools - 2024-01-22-08cd7083-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2024-01-24-2c5887cb-1
hostapd-common - 2023-09-08-e5ccbfc6-6
htop - 3.3.0-1
iperf3 - 3.16-1
iw - 5.19-1
iwinfo - 2023-11-19-a34977c0-1
jansson4 - 2.14-3
jshn - 2024-01-26-c1be5057-1
jsonfilter - 2024-01-23-594cfa86-1
kernel - 5.15.148-1-9f36133887daadc8708a14aefce08546
kmod-ath - 5.15.148+6.5-2
kmod-ath10k-smallbuffers - 5.15.148+6.5-2
kmod-ath9k - 5.15.148+6.5-2
kmod-ath9k-common - 5.15.148+6.5-2
kmod-cfg80211 - 5.15.148+6.5-2
kmod-crypto-aead - 5.15.148-1
kmod-crypto-ccm - 5.15.148-1
kmod-crypto-cmac - 5.15.148-1
kmod-crypto-crc32c - 5.15.148-1
kmod-crypto-ctr - 5.15.148-1
kmod-crypto-gcm - 5.15.148-1
kmod-crypto-gf128 - 5.15.148-1
kmod-crypto-ghash - 5.15.148-1
kmod-crypto-hash - 5.15.148-1
kmod-crypto-hmac - 5.15.148-1
kmod-crypto-manager - 5.15.148-1
kmod-crypto-null - 5.15.148-1
kmod-crypto-rng - 5.15.148-1
kmod-crypto-seqiv - 5.15.148-1
kmod-crypto-sha512 - 5.15.148-1
kmod-gpio-button-hotplug - 5.15.148-3
kmod-lib-crc32c - 5.15.148-1
kmod-mac80211 - 5.15.148+6.5-2
kmod-nf-conntrack - 5.15.148-1
kmod-nf-conntrack6 - 5.15.148-1
kmod-nf-flow - 5.15.148-1
kmod-nf-log - 5.15.148-1
kmod-nf-log6 - 5.15.148-1
kmod-nf-nat - 5.15.148-1
kmod-nf-reject - 5.15.148-1
kmod-nf-reject6 - 5.15.148-1
kmod-nfnetlink - 5.15.148-1
kmod-nft-core - 5.15.148-1
kmod-nft-fib - 5.15.148-1
kmod-nft-nat - 5.15.148-1
kmod-nft-offload - 5.15.148-1
kmod-random-core - 5.15.148-1
libatomic1 - 12.3.0-4
libblobmsg-json20240126 - 2024-01-26-c1be5057-1
libc - 1.2.4-4
libgcc1 - 12.3.0-4
libiperf3 - 3.16-1
libiwinfo-data - 2023-11-19-a34977c0-1
libiwinfo20230701 - 2023-11-19-a34977c0-1
libjson-c5 - 0.17-1
libjson-script20240126 - 2024-01-26-c1be5057-1
liblua5.1.5 - 5.1.5-10
liblucihttp-lua - 2023-03-15-9b5b683f-1
liblucihttp-ucode - 2023-03-15-9b5b683f-1
liblucihttp0 - 2023-03-15-9b5b683f-1
libmbedtls12 - 2.28.7-2
libmnl0 - 1.0.5-1
libncurses6 - 6.4-2
libnftnl11 - 1.2.6-1
libnl-tiny1 - 2023-12-05-965c4bf4-1
libubox20240126 - 2024-01-26-c1be5057-1
libubus-lua - 2023-11-28-f84eb599-1
libubus20231128 - 2023-11-28-f84eb599-1
libuci20130104 - 2023-08-10-5781664d-1
libucode20230711 - 2023-11-30-6e89b89e-1
libudebug - 2023-12-06-6d3f51f9
logd - 2024-01-24-2c5887cb-1
lua - 5.1.5-10
luci-app-commands - git-23.267.29502-3e7fe9f
luci-app-firewall - git-23.364.10482-c74c861
luci-base - git-24.031.09542-8a0ee66
luci-i18n-base-es - git-24.032.43512-49dcd89
luci-i18n-commands-es - git-24.023.57873-9761f40
luci-i18n-firewall-es - git-24.032.43512-49dcd89
luci-lib-base - git-22.308.54612-9118452
luci-lib-ip - git-23.311.79148-ac7b37e
luci-lib-jsonc - git-23.298.74543-efcd487
luci-lib-nixio - git-24.031.06905-d46da53
luci-lua-runtime - git-23.233.49476-18b637f
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-24.031.09542-8a0ee66
luci-mod-status - git-23.351.84061-8b65199
luci-mod-system - git-23.364.85099-cbfa9ca
luci-proto-relay - git-19.307.61018-284918b
luci-theme-bootstrap - git-23.346.66252-9ce280a
luci-theme-openwrt-2020 - git-24.011.08826-4433701
mtd - 26
netifd - 2024-01-04-f01345ec-1
nftables-json - 1.0.9-1
openwrt-keyring - 2022-03-25-62471e69-2
procd - 2023-11-28-7e6c6efd-1
procd-seccomp - 2023-11-28-7e6c6efd-1
relayd - 2023-01-28-f646ba40-1
rpcd - 2023-07-01-c07ab2f9-1
rpcd-mod-file - 2023-07-01-c07ab2f9-1
rpcd-mod-iwinfo - 2023-07-01-c07ab2f9-1
rpcd-mod-luci - 20230123-1
rpcd-mod-ucode - 2023-07-01-c07ab2f9-1
swconfig - 12
terminfo - 6.4-2
uboot-envtools - 2023.07.02-3
ubox - 2024-01-24-2c5887cb-1
ubus - 2023-11-28-f84eb599-1
ubusd - 2023-11-28-f84eb599-1
uci - 2023-08-10-5781664d-1
ucode - 2023-11-30-6e89b89e-1
ucode-mod-fs - 2023-11-30-6e89b89e-1
ucode-mod-html - 1
ucode-mod-lua - 1
ucode-mod-math - 2023-11-30-6e89b89e-1
ucode-mod-nl80211 - 2023-11-30-6e89b89e-1
ucode-mod-rtnl - 2023-11-30-6e89b89e-1
ucode-mod-ubus - 2023-11-30-6e89b89e-1
ucode-mod-uci - 2023-11-30-6e89b89e-1
ucode-mod-uloop - 2023-11-30-6e89b89e-1
uhttpd - 2023-06-25-34a8a74d-2
uhttpd-mod-ubus - 2023-06-25-34a8a74d-2
urandom-seed - 3
urngd - 2023-11-01-44365eb1-1
usign - 2020-05-23-f1f65026-1
wireless-regdb - 2023.09.01-1
wpad-mbedtls - 2023-09-08-e5ccbfc6-6

Diffconfig

No response

Terms

  • I am reporting an issue for OpenWrt, not an unsupported fork.
@castillofrancodamian castillofrancodamian added the bug issue report with a confirmed bug label Feb 2, 2024
@castillofrancodamian castillofrancodamian mentioned this issue Feb 2, 2024
Merged
@DragonBluep
Copy link
Contributor

Hi! Sorry for.the trouble. Can you install openwrt 23.05.2 and show me the full kernel log? From the wiki kernel log, it seems that this model never work correctly. https://openwrt.org/toh/tp-link/archer_c60_v2

@castillofrancodamian
Copy link
Author

@DragonBluep That information is totally outdated. The 5 GHz band has always worked for me.

[    0.000000] Linux version 5.15.137 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23630-842932a63d) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Tue Nov 14 13:38:11 2023
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link Archer C60 v1
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 55908K/65536K available (6079K kernel code, 597K rwdata, 780K rodata, 1240K init, 217K bss, 9628K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000001] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008290] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.074814] pid_max: default: 32768 minimum: 301
[    0.080510] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.088242] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.102629] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.113047] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.120390] pinctrl core: initialized pinctrl subsystem
[    0.127617] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.134390] thermal_sys: Registered thermal governor 'step_wise'
[    0.146026] clocksource: Switched to clocksource MIPS
[    0.159003] NET: Registered PF_INET protocol family
[    0.164361] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.172914] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.181793] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.189984] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.198081] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.205527] TCP: Hash tables configured (established 1024 bind 1024)
[    0.212383] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.219343] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.227075] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.233088] PCI: CLS 0 bytes, default 32
[    0.240559] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.252052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.258275] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.269900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.281330] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.288627] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.297824] printk: console [ttyS0] disabled
[    0.302395] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.311551] printk: console [ttyS0] enabled
[    0.320620] printk: bootconsole [early0] disabled
[    0.348449] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[    0.353414] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.360067] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.366951] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.374360] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.381289] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.388352] Creating 5 MTD partitions on "spi0.0":
[    0.393318] 0x000000000000-0x000000010000 : "u-boot"
[    0.403858] 0x000000010000-0x000000020000 : "info"
[    0.409919] 0x000000020000-0x0000007e0000 : "firmware"
[    0.417999] 2 uimage-fw partitions found on MTD device firmware
[    0.424137] Creating 2 MTD partitions on "firmware":
[    0.429313] 0x000000000000-0x000000238c50 : "kernel"
[    0.434446] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    0.444037] 0x000000238c50-0x0000007c0000 : "rootfs"
[    0.449234] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.461082] mtd: setting mtd4 (rootfs) as root device
[    0.466453] 1 squashfs-split partitions found on MTD device rootfs
[    0.472849] 0x000000690000-0x0000007c0000 : "rootfs_data"
[    0.479563] 0x0000007e0000-0x0000007f0000 : "tplink"
[    0.487241] 0x0000007f0000-0x000000800000 : "art"
[    0.877122] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[    1.563743] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[    1.632427] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.642306] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[    1.649151] i2c_dev: i2c /dev entries driver
[    1.656379] NET: Registered PF_INET6 protocol family
[    1.673558] Segment Routing with IPv6
[    1.677500] In-situ OAM (IOAM) with IPv6
[    1.681665] NET: Registered PF_PACKET protocol family
[    1.687001] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.700637] 8021q: 802.1Q VLAN Support v1.8
[    1.706272] PCI host bridge to bus 0000:00
[    1.710516] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    1.717658] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.723414] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.731646] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[    1.737902] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.745036] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.751674] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.758575] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.109589] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY]
[    2.119928] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    2.138656] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.152655] Freeing unused kernel image (initmem) memory: 1240K
[    2.158809] This architecture does not have kernel memory protection.
[    2.165467] Run /sbin/init as init process
[    2.169703]   with arguments:
[    2.169708]     /sbin/init
[    2.169713]   with environment:
[    2.169716]     HOME=/
[    2.169721]     TERM=linux
[    2.792558] init: Console is alive
[    2.796642] init: - watchdog -
[    4.054199] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.134771] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.153268] init: - preinit -
[    5.186214] random: jshn: uninitialized urandom read (4 bytes read)
[    5.432352] random: jshn: uninitialized urandom read (4 bytes read)
[    5.573073] random: jshn: uninitialized urandom read (4 bytes read)
[    6.272278] eth0: link up (1000Mbps/Full duplex)
[    6.283343] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.297305] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    6.324165] random: procd: uninitialized urandom read (4 bytes read)
[    8.574922] jffs2: notice: (415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 11 of xdatum (0 unchecked, 2 orphan) and 16 of xref (2 dead, 0 orphan) found.
[    8.593635] mount_root: switching to jffs2 overlay
[    8.602617] overlayfs: upper fs does not support tmpfile.
[    8.615855] urandom-seed: Seeding with /etc/urandom.seed
[    8.700302] eth0: link down
[    8.722891] procd: - early -
[    8.726796] procd: - watchdog -
[    9.442796] procd: - watchdog -
[    9.446683] procd: - ubus -
[    9.566855] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.576291] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.590196] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.600134] procd: - init -
[   10.535535] kmodloader: loading kernel modules from /etc/modules.d/*
[   10.997880] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
[   11.005625] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
[   11.511740] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[   11.518586] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   12.436526] urngd: v1.0.2 started.
[   13.837075] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[   13.846658] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   13.866925] ath10k_pci 0000:00:00.0: firmware ver 10.4-3.9.0.2-00157 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,iram-recovery crc32 812c4602
[   14.376788] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
[   14.716421] random: crng init done
[   14.719949] random: 25 urandom warning(s) missed due to ratelimiting
[   14.819825] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id 0:20 crc32 8971a1b4
[   16.826701] ath10k_pci 0000:00:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[   16.927307] ath: EEPROM regdomain: 0x0
[   16.927328] ath: EEPROM indicates default country code should be used
[   16.927333] ath: doing EEPROM country->regdmn map search
[   16.927347] ath: country maps to regdmn code: 0x3a
[   16.927354] ath: Country alpha2 being used: US
[   16.927360] ath: Regpair used: 0x3a
[   17.002216] ath: EEPROM regdomain: 0x0
[   17.002240] ath: EEPROM indicates default country code should be used
[   17.002245] ath: doing EEPROM country->regdmn map search
[   17.002259] ath: country maps to regdmn code: 0x3a
[   17.002266] ath: Country alpha2 being used: US
[   17.002272] ath: Regpair used: 0x3a
[   17.014155] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   17.016129] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
[   17.048385] kmodloader: done loading kernel modules from /etc/modules.d/*
[   34.666431] eth0: link up (1000Mbps/Full duplex)
[   34.691665] br-lan: port 1(eth0.1) entered blocking state
[   34.697319] br-lan: port 1(eth0.1) entered disabled state
[   34.703144] device eth0.1 entered promiscuous mode
[   34.708148] device eth0 entered promiscuous mode
[   34.713621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.768154] br-lan: port 1(eth0.1) entered blocking state
[   34.773757] br-lan: port 1(eth0.1) entered forwarding state
[   34.896621] br-lan: port 2(eth1) entered blocking state
[   34.902044] br-lan: port 2(eth1) entered disabled state
[   34.907728] device eth1 entered promiscuous mode
[   35.696160] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   37.784401] ath: EEPROM regdomain: 0x8020
[   37.788604] ath: EEPROM indicates we should expect a country code
[   37.794894] ath: doing EEPROM country->regdmn map search
[   37.800397] ath: country maps to regdmn code: 0x3b
[   37.805341] ath: Country alpha2 being used: AR
[   37.809940] ath: Regpair used: 0x3b
[   37.813539] ath: regdomain 0x8020 dynamically updated by user
[   37.819560] ath: EEPROM regdomain: 0x8020
[   37.823700] ath: EEPROM indicates we should expect a country code
[   37.830004] ath: doing EEPROM country->regdmn map search
[   37.835482] ath: country maps to regdmn code: 0x3b
[   37.840437] ath: Country alpha2 being used: AR
[   37.845025] ath: Regpair used: 0x3b
[   37.848636] ath: regdomain 0x8020 dynamically updated by user
[   41.424050] br-lan: port 3(2g_lag) entered blocking state
[   41.429797] br-lan: port 3(2g_lag) entered disabled state
[   41.435658] device 2g_lag entered promiscuous mode
[   41.628851] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_lag: link becomes ready
[   41.635776] br-lan: port 3(2g_lag) entered blocking state
[   41.641422] br-lan: port 3(2g_lag) entered forwarding state
[   41.797403] br-lan: port 4(2g_invitados) entered blocking state
[   41.803702] br-lan: port 4(2g_invitados) entered disabled state
[   41.810221] device 2g_invitados entered promiscuous mode
[   41.836451] br-lan: port 4(2g_invitados) entered blocking state
[   41.842612] br-lan: port 4(2g_invitados) entered forwarding state
[   42.052535] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_invitados: link becomes ready
[   44.722534] ath10k_pci 0000:00:00.0: Unknown eventid: 36933
[   44.732871] br-lan: port 5(5g_jitter) entered blocking state
[   44.738814] br-lan: port 5(5g_jitter) entered disabled state
[   44.744983] device 5g_jitter entered promiscuous mode
[   45.077052] IPv6: ADDRCONF(NETDEV_CHANGE): 5g_jitter: link becomes ready
[   45.084279] br-lan: port 5(5g_jitter) entered blocking state
[   45.090203] br-lan: port 5(5g_jitter) entered forwarding state
[   45.118008] br-lan: port 6(5g_invitados) entered blocking state
[   45.124269] br-lan: port 6(5g_invitados) entered disabled state
[   45.146105] device 5g_invitados entered promiscuous mode
[   45.170614] br-lan: port 6(5g_invitados) entered blocking state
[   45.176808] br-lan: port 6(5g_invitados) entered forwarding state
[   45.378328] IPv6: ADDRCONF(NETDEV_CHANGE): 5g_invitados: link becomes ready
[   45.528310] br-lan: port 7(5g_wds) entered blocking state
[   45.534026] br-lan: port 7(5g_wds) entered disabled state
[   45.560348] device 5g_wds entered promiscuous mode
[   45.565722] br-lan: port 7(5g_wds) entered blocking state
[   45.571384] br-lan: port 7(5g_wds) entered forwarding state
[   45.736341] br-lan: port 7(5g_wds) entered disabled state
[   46.816136] br-lan: port 5(5g_jitter) entered disabled state
[   46.822489] br-lan: port 6(5g_invitados) entered disabled state
[   48.937679] 5g_wds: authenticate with 06:eb:d8:bc:33:2a
[   48.955493] 5g_wds: send auth to 06:eb:d8:bc:33:2a (try 1/3)
[   48.964250] 5g_wds: authenticated
[   48.976091] 5g_wds: associate with 06:eb:d8:bc:33:2a (try 1/3)
[   48.985425] 5g_wds: RX AssocResp from 06:eb:d8:bc:33:2a (capab=0x11 status=0 aid=1)
[   48.995388] ath10k_pci 0000:00:00.0: pdev param 0 not supported by firmware
[   49.002822] ath10k_pci 0000:00:00.0: failed to enable peer stats info: -122
[   49.011075] 5g_wds: associated
[   49.147400] IPv6: ADDRCONF(NETDEV_CHANGE): 5g_wds: link becomes ready
[   49.154479] br-lan: port 7(5g_wds) entered blocking state
[   49.160138] br-lan: port 7(5g_wds) entered forwarding state
[   49.190954] br-lan: port 5(5g_jitter) entered blocking state
[   49.196898] br-lan: port 5(5g_jitter) entered forwarding state
[   49.441182] br-lan: port 6(5g_invitados) entered blocking state
[   49.447396] br-lan: port 6(5g_invitados) entered forwarding state

@DragonBluep
Copy link
Contributor

And please upload art partition backup here so that I can do some test. thanks.

@DragonBluep
Copy link
Contributor

By the way, does CT version driver works for you?

@Ansuel
Copy link
Member

Ansuel commented Feb 3, 2024

@DragonBluep problem is probably that in board-2 there isn't any ID 20...

bus=pci,bmi-chip-id=0,bmi-board-id=20

This is why I had some fear for those case that linked the calibration to the board file... It was to handle these funny case... But I wonder how many of these are around... Ideally we can sort all by just passing the calibration nvmem but I think we need some patching to ath10k.

@castillofrancodamian
Copy link
Author

By the way, does CT version driver works for you?

Kernel Log 

[    0.000000] Linux version 5.15.148 (builder@buildhost) (mips-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r24991-3595931934) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 Fri Feb 2 16:32:50 2024
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019750 (MIPS 74Kc)
[    0.000000] MIPS: machine is TP-Link Archer C60 v1
[    0.000000] SoC: Qualcomm Atheros QCA956X ver 1 rev 0
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 55332K/65536K available (6120K kernel code, 592K rwdata, 1336K rodata, 1224K init, 216K bss, 10204K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] CPU clock: 775.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4932285024 ns
[    0.000001] sched_clock: 32 bits at 387MHz, resolution 2ns, wraps every 5541893118ns
[    0.008291] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.074815] pid_max: default: 32768 minimum: 301
[    0.080505] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.088241] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.102383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.112803] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.120156] pinctrl core: initialized pinctrl subsystem
[    0.127380] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.134183] thermal_sys: Registered thermal governor 'step_wise'
[    0.150518] clocksource: Switched to clocksource MIPS
[    0.163558] NET: Registered PF_INET protocol family
[    0.168891] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.177416] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.186401] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.194583] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.202678] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.210117] TCP: Hash tables configured (established 1024 bind 1024)
[    0.216971] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.223934] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.231696] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.237726] PCI: CLS 0 bytes, default 32
[    0.245174] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.256705] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.262928] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.274570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.285978] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.293251] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.302486] printk: console [ttyS0] disabled
[    0.307061] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
[    0.316210] printk: console [ttyS0] enabled
[    0.325282] printk: bootconsole [early0] disabled
[    0.352965] spi-nor spi0.0: gd25q64 (8192 Kbytes)
[    0.357934] 5 fixed-partitions partitions found on MTD device spi0.0
[    0.364583] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.371467] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.378590] Creating 5 MTD partitions on "spi0.0":
[    0.383598] 0x000000000000-0x000000010000 : "u-boot"
[    0.392874] 0x000000010000-0x000000020000 : "info"
[    0.398932] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.406155] 0x000000020000-0x0000007e0000 : "firmware"
[    0.414457] 2 uimage-fw partitions found on MTD device firmware
[    0.420629] Creating 2 MTD partitions on "firmware":
[    0.425760] 0x000000000000-0x00000025ea53 : "kernel"
[    0.430913] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    0.441244] 0x00000025ea53-0x0000007c0000 : "rootfs"
[    0.446393] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.456951] mtd: setting mtd4 (rootfs) as root device
[    0.463101] 1 squashfs-split partitions found on MTD device rootfs
[    0.469517] 0x0000006c0000-0x0000007c0000 : "rootfs_data"
[    0.476160] 0x0000007e0000-0x0000007f0000 : "tplink"
[    0.483880] 0x0000007f0000-0x000000800000 : "art"
[    0.489848] OF: Bad cell count for /ahb/spi@1f000000/flash@0/partitions
[    0.891609] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
[    1.578268] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[    1.646909] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[    1.656772] eth0: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
[    1.663566] i2c_dev: i2c /dev entries driver
[    1.670798] NET: Registered PF_INET6 protocol family
[    1.687324] Segment Routing with IPv6
[    1.691248] In-situ OAM (IOAM) with IPv6
[    1.695409] NET: Registered PF_PACKET protocol family
[    1.700783] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.714432] 8021q: 802.1Q VLAN Support v1.8
[    1.719932] PCI host bridge to bus 0000:00
[    1.724227] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    1.731347] pci_bus 0000:00: root bus resource [io  0x0000]
[    1.737105] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.745375] pci 0000:00:00.0: [168c:0056] type 00 class 0x028000
[    1.751636] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    1.758773] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.765549] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.772457] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    2.124061] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:04 [uid=004dd042, driver=Generic PHY]
[    2.134396] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    2.153479] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    2.167399] Freeing unused kernel image (initmem) memory: 1224K
[    2.173555] This architecture does not have kernel memory protection.
[    2.180213] Run /sbin/init as init process
[    2.184463]   with arguments:
[    2.184469]     /sbin/init
[    2.184474]   with environment:
[    2.184478]     HOME=/
[    2.184482]     TERM=linux
[    2.897438] init: Console is alive
[    2.901517] init: - watchdog -
[    4.258436] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.339522] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.357994] init: - preinit -
[    5.430999] random: jshn: uninitialized urandom read (4 bytes read)
[    5.678774] random: jshn: uninitialized urandom read (4 bytes read)
[    5.820979] random: jshn: uninitialized urandom read (4 bytes read)
[    6.469961] eth0: link up (1000Mbps/Full duplex)
[    6.481081] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.487946] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[    6.520831] random: procd: uninitialized urandom read (4 bytes read)
[    8.789966] jffs2: notice: (415) jffs2_build_xattr_subsystem: complete building xattr subsystem, 5 of xdatum (0 unchecked, 1 orphan) and 6 of xref (1 dead, 0 orphan) found.
[    8.807856] mount_root: switching to jffs2 overlay
[    8.819453] overlayfs: upper fs does not support tmpfile.
[    8.832830] urandom-seed: Seeding with /etc/urandom.seed
[    8.915434] eth0: link down
[    8.945299] procd: - early -
[    8.948617] procd: - watchdog -
[    9.687621] procd: - watchdog -
[    9.691511] procd: - ubus -
[    9.786944] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.796738] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.803713] random: ubusd: uninitialized urandom read (4 bytes read)
[    9.815505] procd: - init -
[   11.010353] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.577116] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
[   11.584639] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
[   12.105866] ath10k 6.4 driver, optimized for CT firmware, probing pci device: 0x56.
[   12.131786] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002)
[   12.138580] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0
[   12.803575] urngd: v1.0.2 started.
[   14.480862] random: crng init done
[   14.484391] random: 27 urandom warning(s) missed due to ratelimiting
[   16.155777] ath10k_pci 0000:00:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[   16.165361] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[   16.184551] ath10k_pci 0000:00:00.0: firmware ver 10.4b-ct-9888-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 59e741e7
[   16.531764] ath10k_pci 0000:00:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=20 from ath10k/QCA9888/hw2.0/board-2.bin
[   16.998443] ath10k_pci 0000:00:00.0: failed to fetch board-2.bin or board.bin from ath10k/QCA9888/hw2.0
[   17.008210] ath10k_pci 0000:00:00.0: failed to fetch board file: -12
[   17.030722] ath10k_pci 0000:00:00.0: could not probe fw (-12)
[   17.110658] ath: EEPROM regdomain: 0x0
[   17.110681] ath: EEPROM indicates default country code should be used
[   17.110686] ath: doing EEPROM country->regdmn map search
[   17.110701] ath: country maps to regdmn code: 0x3a
[   17.110707] ath: Country alpha2 being used: US
[   17.110714] ath: Regpair used: 0x3a
[   17.122574] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   17.123442] ieee80211 phy1: Atheros AR9561 Rev:0 mem=0xb8100000, irq=2
[   17.161056] kmodloader: done loading kernel modules from /etc/modules.d/*
[   34.713925] eth0: link up (1000Mbps/Full duplex)
[   34.718734] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.741559] br-lan: port 1(eth0.1) entered blocking state
[   34.747163] br-lan: port 1(eth0.1) entered disabled state
[   34.753042] device eth0.1 entered promiscuous mode
[   34.758003] device eth0 entered promiscuous mode
[   34.782313] br-lan: port 1(eth0.1) entered blocking state
[   34.787916] br-lan: port 1(eth0.1) entered forwarding state
[   34.874881] br-lan: port 2(eth1) entered blocking state
[   34.880300] br-lan: port 2(eth1) entered disabled state
[   34.885995] device eth1 entered promiscuous mode
[   35.780874] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   36.982338] eth1: link up (100Mbps/Full duplex)
[   37.011758] br-lan: port 2(eth1) entered blocking state
[   37.017183] br-lan: port 2(eth1) entered forwarding state
[   39.273642] ath: EEPROM regdomain: 0x8020
[   39.277803] ath: EEPROM indicates we should expect a country code
[   39.284143] ath: doing EEPROM country->regdmn map search
[   39.289628] ath: country maps to regdmn code: 0x3b
[   39.294586] ath: Country alpha2 being used: AR
[   39.299170] ath: Regpair used: 0x3b
[   39.302783] ath: regdomain 0x8020 dynamically updated by user
[   43.414259] br-lan: port 3(2g_lag) entered blocking state
[   43.419903] br-lan: port 3(2g_lag) entered disabled state
[   43.425820] device 2g_lag entered promiscuous mode
[   43.705103] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_lag: link becomes ready
[   43.712060] br-lan: port 3(2g_lag) entered blocking state
[   43.717673] br-lan: port 3(2g_lag) entered forwarding state
[   44.688581] br-lan: port 4(2g_invitados) entered blocking state
[   44.694787] br-lan: port 4(2g_invitados) entered disabled state
[   44.701184] device 2g_invitados entered promiscuous mode
[   44.731323] device 2g_invitados left promiscuous mode
[   44.736771] br-lan: port 4(2g_invitados) entered disabled state
[   44.782268] br-lan: port 4(2g_invitados) entered blocking state
[   44.788412] br-lan: port 4(2g_invitados) entered disabled state
[   44.794835] device 2g_invitados entered promiscuous mode
[   45.025134] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_invitados: link becomes ready
[   45.032556] br-lan: port 4(2g_invitados) entered blocking state
[   45.038691] br-lan: port 4(2g_invitados) entered forwarding state
[  433.381775] br-lan: port 4(2g_invitados) entered disabled state
[  433.390153] device 2g_invitados left promiscuous mode
[  433.395429] br-lan: port 4(2g_invitados) entered disabled state
[  433.770865] br-lan: port 3(2g_lag) entered disabled state
[  433.791706] device 2g_lag left promiscuous mode
[  433.796552] br-lan: port 3(2g_lag) entered disabled state
[  437.253552] br-lan: port 3(2g_lag) entered blocking state
[  437.259200] br-lan: port 3(2g_lag) entered disabled state
[  437.265040] device 2g_lag entered promiscuous mode
[  437.527426] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_lag: link becomes ready
[  437.534271] br-lan: port 3(2g_lag) entered blocking state
[  437.539917] br-lan: port 3(2g_lag) entered forwarding state
[  437.605687] br-lan: port 4(2g_invitados) entered blocking state
[  437.611872] br-lan: port 4(2g_invitados) entered disabled state
[  437.618521] device 2g_invitados entered promiscuous mode
[  437.666169] br-lan: port 4(2g_invitados) entered blocking state
[  437.672314] br-lan: port 4(2g_invitados) entered forwarding state
[  437.867261] device 2g_invitados left promiscuous mode
[  437.872739] br-lan: port 4(2g_invitados) entered disabled state
[  437.898977] IPv6: ADDRCONF(NETDEV_CHANGE): 2g_invitados: link becomes ready
[  437.936834] br-lan: port 4(2g_invitados) entered blocking state
[  437.943028] br-lan: port 4(2g_invitados) entered disabled state
[  437.949493] device 2g_invitados entered promiscuous mode
[  437.955138] br-lan: port 4(2g_invitados) entered blocking state
[  437.961312] br-lan: port 4(2g_invitados) entered forwarding state
[  535.978715] device 2g_lag left promiscuous mode
[  535.983673] br-lan: port 3(2g_lag) entered disabled state
[  536.007873] device 2g_invitados left promiscuous mode
[  536.013207] br-lan: port 4(2g_invitados) entered disabled state

.manifest 

ath10k-board-qca9888 - 20231211-2
ath10k-firmware-qca9888-ct - 2020-11-08-1
base-files - 1561-r24991-3595931934
busybox - 1.36.1-1
cgi-io - 2022-08-10-901b0f04-21
dnsmasq - 2.89-7
dropbear - 2022.82-5
firewall4 - 2023-11-03-698a5335-1
fstools - 2024-01-22-08cd7083-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2024-01-24-2c5887cb-1
hostapd-common - 2023-09-08-e5ccbfc6-6
htop - 3.3.0-1
iperf3 - 3.16-1
iw - 5.19-1
iwinfo - 2023-11-19-a34977c0-1
jansson4 - 2.14-3
jshn - 2024-01-26-c1be5057-1
jsonfilter - 2024-01-23-594cfa86-1
kernel - 5.15.148-1-9f36133887daadc8708a14aefce08546
kmod-ath - 5.15.148+6.5-2
kmod-ath10k-ct-smallbuffers - 5.15.148+2023-06-05-fadd0768-1
kmod-ath9k - 5.15.148+6.5-2
kmod-ath9k-common - 5.15.148+6.5-2
kmod-cfg80211 - 5.15.148+6.5-2
kmod-crypto-aead - 5.15.148-1
kmod-crypto-ccm - 5.15.148-1
kmod-crypto-cmac - 5.15.148-1
kmod-crypto-crc32c - 5.15.148-1
kmod-crypto-ctr - 5.15.148-1
kmod-crypto-gcm - 5.15.148-1
kmod-crypto-gf128 - 5.15.148-1
kmod-crypto-ghash - 5.15.148-1
kmod-crypto-hash - 5.15.148-1
kmod-crypto-hmac - 5.15.148-1
kmod-crypto-manager - 5.15.148-1
kmod-crypto-null - 5.15.148-1
kmod-crypto-rng - 5.15.148-1
kmod-crypto-seqiv - 5.15.148-1
kmod-crypto-sha512 - 5.15.148-1
kmod-gpio-button-hotplug - 5.15.148-3
kmod-hwmon-core - 5.15.148-1
kmod-lib-crc32c - 5.15.148-1
kmod-mac80211 - 5.15.148+6.5-2
kmod-nf-conntrack - 5.15.148-1
kmod-nf-conntrack6 - 5.15.148-1
kmod-nf-flow - 5.15.148-1
kmod-nf-log - 5.15.148-1
kmod-nf-log6 - 5.15.148-1
kmod-nf-nat - 5.15.148-1
kmod-nf-reject - 5.15.148-1
kmod-nf-reject6 - 5.15.148-1
kmod-nfnetlink - 5.15.148-1
kmod-nft-core - 5.15.148-1
kmod-nft-fib - 5.15.148-1
kmod-nft-nat - 5.15.148-1
kmod-nft-offload - 5.15.148-1
kmod-random-core - 5.15.148-1
libatomic1 - 12.3.0-4
libblobmsg-json20240126 - 2024-01-26-c1be5057-1
libc - 1.2.4-4
libgcc1 - 12.3.0-4
libiperf3 - 3.16-1
libiwinfo-data - 2023-11-19-a34977c0-1
libiwinfo20230701 - 2023-11-19-a34977c0-1
libjson-c5 - 0.17-1
libjson-script20240126 - 2024-01-26-c1be5057-1
liblua5.1.5 - 5.1.5-10
liblucihttp-lua - 2023-03-15-9b5b683f-1
liblucihttp-ucode - 2023-03-15-9b5b683f-1
liblucihttp0 - 2023-03-15-9b5b683f-1
libmbedtls12 - 2.28.7-2
libmnl0 - 1.0.5-1
libncurses6 - 6.4-2
libnftnl11 - 1.2.6-1
libnl-tiny1 - 2023-12-05-965c4bf4-1
libubox20240126 - 2024-01-26-c1be5057-1
libubus-lua - 2023-11-28-f84eb599-1
libubus20231128 - 2023-11-28-f84eb599-1
libuci20130104 - 2023-08-10-5781664d-1
libucode20230711 - 2023-11-30-6e89b89e-1
libudebug - 2023-12-06-6d3f51f9
logd - 2024-01-24-2c5887cb-1
lua - 5.1.5-10
luci-app-commands - git-23.267.29502-3e7fe9f
luci-app-firewall - git-23.364.10482-c74c861
luci-base - git-24.031.09542-8a0ee66
luci-i18n-base-es - git-24.032.43512-49dcd89
luci-i18n-commands-es - git-24.023.57873-9761f40
luci-i18n-firewall-es - git-24.032.43512-49dcd89
luci-lib-base - git-22.308.54612-9118452
luci-lib-ip - git-23.311.79148-ac7b37e
luci-lib-jsonc - git-23.298.74543-efcd487
luci-lib-nixio - git-24.031.06905-d46da53
luci-lua-runtime - git-23.233.49476-18b637f
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-24.031.09542-8a0ee66
luci-mod-status - git-23.351.84061-8b65199
luci-mod-system - git-23.364.85099-cbfa9ca
luci-proto-relay - git-19.307.61018-284918b
luci-theme-bootstrap - git-23.346.66252-9ce280a
luci-theme-openwrt-2020 - git-24.011.08826-4433701
mtd - 26
netifd - 2024-01-04-f01345ec-1
nftables-json - 1.0.9-1
openwrt-keyring - 2022-03-25-62471e69-2
procd - 2023-11-28-7e6c6efd-1
procd-seccomp - 2023-11-28-7e6c6efd-1
relayd - 2023-01-28-f646ba40-1
rpcd - 2023-07-01-c07ab2f9-1
rpcd-mod-file - 2023-07-01-c07ab2f9-1
rpcd-mod-iwinfo - 2023-07-01-c07ab2f9-1
rpcd-mod-luci - 20230123-1
rpcd-mod-ucode - 2023-07-01-c07ab2f9-1
swconfig - 12
terminfo - 6.4-2
uboot-envtools - 2023.07.02-3
ubox - 2024-01-24-2c5887cb-1
ubus - 2023-11-28-f84eb599-1
ubusd - 2023-11-28-f84eb599-1
uci - 2023-08-10-5781664d-1
ucode - 2023-11-30-6e89b89e-1
ucode-mod-fs - 2023-11-30-6e89b89e-1
ucode-mod-html - 1
ucode-mod-lua - 1
ucode-mod-math - 2023-11-30-6e89b89e-1
ucode-mod-nl80211 - 2023-11-30-6e89b89e-1
ucode-mod-rtnl - 2023-11-30-6e89b89e-1
ucode-mod-ubus - 2023-11-30-6e89b89e-1
ucode-mod-uci - 2023-11-30-6e89b89e-1
ucode-mod-uloop - 2023-11-30-6e89b89e-1
uhttpd - 2023-06-25-34a8a74d-2
uhttpd-mod-ubus - 2023-06-25-34a8a74d-2
urandom-seed - 3
urngd - 2023-11-01-44365eb1-1
usign - 2020-05-23-f1f65026-1
wireless-regdb - 2023.09.01-1
wpad-mbedtls - 2023-09-08-e5ccbfc6-6

@castillofrancodamian
Copy link
Author

And please upload art partition backup here so that I can do some test. thanks.

archer-c60.mtd7.bin.tar.gz

@DragonBluep
Copy link
Contributor

@DragonBluep problem is probably that in board-2 there isn't any ID 20...

bus=pci,bmi-chip-id=0,bmi-board-id=20

Oh I see it. Both CT version and none-CT version board doesn't have this id.

This is why I had some fear for those case that linked the calibration to the board file... It was to handle these funny case... But I wonder how many of these are around... Ideally we can sort all by just passing the calibration nvmem but I think we need some patching to ath10k.

@Ansuel I think a simple patch checking ret value and reading nvmem pre-calibration data after this line should be enough. Would you want to cook such a patch? If not, maybe I can have a try tomorrow.
https://github.com/greearb/ath10k-ct/blob/fadd0768cbd22248a60efbb219ccefc9d86cd78c/ath10k-6.4/core.c#L2001

@DragonBluep
Copy link
Contributor

DragonBluep commented Feb 11, 2024 •
edited

This patch should fix the CT version driver. Place it in package/kernel/ath10k-ct/patches.

Anyway, I think add missing board id to board-2.bin is a better fix. One week has passed, and we still only received one failed feedback. ath10k use firmware struct to store the board data file. It's designed to read data from filesystem. Though we can manually load it from NVMEM cell, that makes me uncomfortable.

--- a/ath10k-6.4/core.c
+++ b/ath10k-6.4/core.c
@@ -1000,6 +1000,35 @@ static const struct firmware *ath10k_fetch_fw_file(struct ath10k *ar,
 	return fw;
 }
 
+static struct firmware *ath10k_fetch_fw_nvmem(struct ath10k *ar,
+					      const char *cell_name)
+{
+	struct firmware *fw;
+	struct nvmem_cell *cell;
+	void *buf;
+	size_t len;
+
+	cell = devm_nvmem_cell_get(ar->dev, cell_name);
+	if (IS_ERR(cell))
+		return ERR_PTR(-ENOENT);
+
+	buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+	if (IS_ERR(buf))
+		return buf;
+
+	fw = kzalloc(sizeof(*fw), GFP_KERNEL);
+	if (!fw) {
+		kfree(buf);
+		return fw;
+	}
+
+	fw->data = (u8 *)buf;
+	fw->size = len;
+
+	return fw;
+}
+
 static int ath10k_push_board_ext_data(struct ath10k *ar, const void *data,
 				      size_t data_len)
 {
@@ -1625,6 +1654,15 @@ static int ath10k_core_fetch_board_data_api_1(struct ath10k *ar, int bd_ie_type)
 			ar->normal_mode_fw.board = fw;
 		}
 
+		/* workaround: load board data from NVMEM calibration data */
+		if (IS_ERR(ar->normal_mode_fw.board)) {
+			ath10k_err(ar, "failed to find board id from %s\n",
+				   ar->hw_params.fw.board);
+
+			fw = ath10k_fetch_fw_nvmem(ar, "pre-calibration");
+			ar->normal_mode_fw.board = fw;
+		}
+
 		if (IS_ERR(ar->normal_mode_fw.board))
 			return PTR_ERR(ar->normal_mode_fw.board);

@Ansuel
Copy link
Member

Ansuel commented Feb 11, 2024

@DragonBluep main problem is that we have way too much ath79 target and some device are used as dumb ap and use only stable build... Adding stuff to board-2 is a no go as we use upstream board-2 and we can't provide a custom one...

I really think we need this patch, I would add a big warning tho that we are using pre-calibration.

@DragonBluep DragonBluep mentioned this issue Feb 12, 2024
Closed
@DragonBluep
Copy link
Contributor

@Ansuel Hi! I opened a new PR in #14611 to submit this patch.

Open
@pesa1234
Copy link

pesa1234 commented Mar 20, 2024 •
edited

I'm on Archer C6 v2 and I also get this error. How can I help? @DragonBluep

Applying this patch #14611 all is ok

@mrkiko
Copy link
Contributor

mrkiko commented Mar 22, 2024

Would be the R6100 affected by this?

@pesa1234
Copy link

Would be the R6100 affected by this?

Sorry, but I don't know, please try to install latest snapshot and check if wifi 5ghz it works.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug issue report with a confirmed bug Self Built Image SNAPSHOT Supported Device target/ath79 pull request/issue for ath79 target
Projects
None yet
Milestone
No milestone
Development

Successfully merging a pull request may close this issue.

ath10k: support fetching board data from NVMEM calibration DragonBluep/openwrt
5 participants
@pesa1234 @mrkiko @Ansuel @castillofrancodamian @DragonBluep