ddns.config_sample

#
#
# Here you find a description on every parameter supported
# and used by ddns-scripts and corresponding LuCI application
#
# Inside your ddns configuration file (/etc/config/ddns)
# you might not find some of below described options.
# This is because you don't need to define options
# if using there defaults. The LuCI application will delete
# options that configured to there default values.
#
# If you have a working ddns configuration from old ddns-scripts (Version 1.x)
# everything will function the same with new scripts
# without any changes to the configuration.
#
# If you like to use this file for your configuration then
# use a copy, because the used software to modify the
# configuration files will throw away all empty lines
# and those starting with # (comments).
#

#####################################################################
# Global application settings
#
config ddns "global"

	###########
	# set date format to use for display date in logfiles
	# and LuCI web application.
	# For codes see man pages of date command.
	# default: "%F %R" (ISO 8601 format)
#	option ddns_dateformat "%F %R"

	###########
	# set run directory to use for .pid and .update files
	# there will be a separate file for every running service section
	# default: "/var/run/ddns"
#	option ddns_rundir "/var/run/ddns"

	###########
	# set log directory to use for .log files
	# there will be a separate file for every running service section
	# default: "/var/log/ddns"
#	option ddns_logdir "/var/log/ddns"

	###########
	# set number of lines stored in .log file before auto truncated
	# default: "250" lines
#	option ddns_loglines "250"

	###########
	# Whether to allow to send Private/Special IP's to the DDNS provider
	# IPv4: 0.x, 10.x, 127.x, 172.16.x-172.31.x, 192.168.x
	# IPv6: ::, Fxxx:
	# default: "0"	disabled
#	option upd_privateip "0"

#####################################################################
# DDNS service settings
#
# for each service you want to serve you need a separate configuration
# if you need IPv4 and IPv6 you need to setup 2 separate configurations
# with different names. (i.e. "myddns_ipv4" and "myddns_ipv6")
# do not use white-spaces or dashes "-" or "@" ":" "!" or
# other special characters inside name.
config service "myddns"

	########### Basic settings ########################

	###########
	# enable/disable this service section
	# default: "0"	disabled
	option enabled "0"

	###########
	# detecting/sending IPv4 or IPv6 address to the DDNS provider
	# set to "1" if you want to use IPv6
	# default: "0"	use IPv4
	option use_ipv6 "0"

	###########
	# defines the network as defined in /etc/config/network
	# to be monitored for up/down events to start via hotplug
	default: "wan"	for IPv4
	default: "wan6"	for IPv6
	option interface "wan"

	###########
	# Next you need to specify the name of the service you are
	# connecting to "eg. dyndns.org".  The format of the update
	# urls for several different dynamic dns services is specified
	# in the "/usr/lib/ddns/services" file for IPv4 and in
	# "/usr/lib/ddns/service_ipv6" file. This list is hardly complete
	# as there are many, many different dynamic dns services.
	# If your service is on the list you can merely specify it with the
	# "service_name" option.  Otherwise you will need to determine
	# the format of the url to update with.  You can either add an
	# entry to the "/usr/lib/ddns/services" or "services_ipv6" file
	# or specify this with the "update_url" option.
	# If your ddns provider doesn't work with ddns-scripts because
	# there are additional parameters or other special thinks to be done,
	# then you could write your own script to send updates to your ddns provider.
	# Have a look into /usr/lib/ddns/update_sample.sh
	# The script is specified in "update_script"
	# Either set "service_name" or one of "update_url" and "update_script"
	# default: none
	option service_name "dyndns.org"

	# sample:
	# "http://[USERNAME]:[PASSWORD]@members.dyndns.org/nic/update?hostname=[DOMAIN]&myip=[IP]"
#	option update_url   ""

	# sample:
	# "/usr/lib/ddns/update_sample.sh"
#	option update_script   ""

	###########
	# Keep an eye on providers help pages.
	#
	# FQDN of ONE of your defined host at DDNS provider
	# REQUIRED to verify what the current IP at DNS using nslookup/host command
	# default: none
	option lookup_host ""

	# Your DNS name / replace [DOMAIN] in update_url
	# default: none
	option domain ""

	# Username of your DDNS service account / replace [USERNAME] in update_url
	# default: none
	option username ""

	# Password of your DDNS service account / replace [PASSWORD] in update url
	# default: none
	option password ""

	###########
	# Optional parameters for use inside update_url
	#
	# parameter that will be urlencoded before replacement of [PARAMENC] inside update url
	# default: none
	option param_enc ""

	# parameter that repace [PARAMOPT] inside update url
	# default: none
	option param_opt ""

	###########
	# use HTTPS for secure communication with you DDNS provider
	# personally found some providers having problems when not sending
	# updates via HTTPS. You must not specify "https://" in update_url.
	# It's modified by the scripts themselves
	# Needs GNU Wget (with SSL support) or cURL to be installed.
	# default: "0"	do not use HTTPS
	option use_https "0"

	# if using HTTPS (see above) the transfer program tries to verify
	# the providers server certificate. For verification there needs to be
	# the counterpart on this machine. Specify the path or path/file where
	# the transfer program can find them. (might need package CA-certificates)
	# if you don't want to verify servers certificate (insecure) you should
	# this parameter to "IGNORE" (in capital letters)
	# default: (none)	path where CA-certificate package is installed
	option cacert "/etc/ssl/certs"

	###########
	# for logging and control if everything work fine you can get information inside
	# system log . Critical Errors are always send to system log.
	# You can define which information you like to log
	# 1 == info, notice, warning, errors
	# 2 == notice, warning, errors
	# 3 == warning, errors
	# 4 == errors
	# default: "0" off
	option use_syslog  "0"

	###########
	# for logging and control if everything work fine you can get information inside
	# log file. You find the file per default in /var/log/ddns/[sectionname].log
	# The path can be modified for all log files in ddns.global section (see above)
	# default: "1" on
	option use_logfile "1"

	########### Advanced settings #####################

	###########
	# you need to specify how ddns-scripts should detect you current local ip.
	# the ip_source could be set to "network", "web", "interface" or "script"
	# the parameters below specifying the additional information needed for
	# the corresponding ip_spource configuration
	# default: "network"

	# ip_source "network" additional uses option ip_network and detects the
	# current local ip on network as defined in /etc/config/network
	# default: "wan"  using IPv4
	# default: "wan6" using IPv6
	option ip_source  "network"
	option ip_network "wan"

	# ip_source "web" additional uses option ip_url and detects the current
	# local ip from special web sides that response with the ip address of
	# calling host. If you are behind a firewall/NAT this is the best option
	# since none of the local networks or interfaces will have the external ip.
	# default: "http://checkip.dyndns.com"   using IPv4
	# default: "http://checkipv6.dyndns.com" using IPv6
#	option ip_source "web"
#	option ip_url    "http://checkip.dyndns.com"

	# ip_source "interface" additional uses option ip_interface
	# ip_source "interface" uses one of the locally installed physical interfaces
	# to detect independent from network they configured to.
	# default: none
#	option ip_source    "interface"
#	option ip_interface "eth1"

	# ip_source "script" additional uses option ip_script
	# it's useful if you want to write your own script to detect the
	# current local ip. put full path into ip_script option.
	# The script must be executable.
	# default: none
#	option ip_source "script"
#	option ip_script ""

	# This option can be used in combination with ip_source "web" and ip_url.
	# It adds a given user agent string to the request.
	# Will only be used when wget or wget-ssl is installed.
#	option user_agent "Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/95.0"

	###########
	# force_ipversion option will set the "-4" respectively "-6" parameter
	# on command line of transfer and DNS lookup program.
	# So the whole communication uses the selected IP version between both ends.
	# needs GNU Wget or cURL installed for transfer and
	# BIND's host for DNS lookup.
	# default: "0" disabled
	option force_ipversion "0"

	###########
	# Normally the current (in the internet) registered ip is detected using the
	# local defined name lookup policies (i.e. /etc/resolve.conf etc.)
	# Specify here a DNS server to use instead of the defaults.
	# you can use hostname or ip address
	# i.e. "google-public-dns-a.google.com"
	# default: none
#	option dns_server "google-public-dns-a.google.com"

	# By default every DNS call is made via UDP protocol
	# Some internet provider offer modems that cache UDP DNS requests.
	# They also redirect calls to external servers to local.
	# To force the usage of TCP for DNS requests enable this option
	# Needs BIND's host program be installed
	# default: "0" disabled
#	option force_dnstcp "0"

	###########
	# If a Proxy is need to access HTTP/HTTPS pages on the WEB
	# it can be configured here also for sending updates to the
	# DDNS provider. If you configured use_https='1' above, you
	# need to setup your HTTPS proxy here, otherwise your
	# HTTP proxy. !!! You should not detect your current IP
	# ip_source='web' (see above) because this request is also
	# send via the configured proxy !!!
	# Syntax: [user:password@]proxy:port !port is required !
	# IPv6 address must be in squared brackets "[...]"
	# default: none
#	option proxy ''

	###########
	# In some very special configurations i.e. Multi WAN environment
	# in a NAT cascade it might be necessary to define
	# a network to use for communication.
	# should use option ip_source "web" (see above)
	# Needs GNU Wget (with SSL support) or cURL to be installed.
	# GNU Wget will use IP address and cURL the physical device 
	# of the given network
	# default: none
#	option bind_network "wan7"

	########### Timer settings ########################

	###########
	# defines the time interval to check if local IP has changed
	# After the first start and first update send, the system will
	# wait this time before verify if update was successful send.
	# !!! checks below 5 minutes make no sense because the Internet
	# needs about 5-10 minutes to sync an IP-change to all DNS servers !!!
	# accepted unit entry’s: 'seconds' 'minutes' 'hours'
	# minimum 5 minutes == 300 seconds
	# default 10 minutes
	option check_interval	'10'
	option check_unit	'minutes'

	###########
	# force to send an update to service provider, if no change was detected.
	# consult DDNS providers documentation if your DDNS entry might timeout.
	# accepted unit entry’s: 'minutes' 'hours' 'days'
	# minimum needs to be greater or equal check interval (see above)
	# A special setting of '0' is allowed, which forces the script to run once.
	# It sends an update, verify if update was accepted by DNS
	# (retry if not) and finish. Useful if you want to start by your own (i.e. cron)
	# default 3 days == 72 hours
	option force_interval	'72'
	option force_unit	'hours'

	###########
	# if error happen on detecting, sending or updating the
	# script will retry the relevant action for retry_count times
	# before stopping script execution.
	# default: 5
	option retry_count '5'

	###########
	# if error happen on detecting, sending or updating the
	# script will retry the relevant action.
	# here you define the time to wait before retry is started
	# accepted unit entry’s: 'seconds' 'minutes'
	# default: 60 seconds
	option retry_interval	'60'
	option retry_unit	'seconds'