外接HDMI 显示器，没有图像输出

[peterhuang007]

1.使用的 固件 Armbian_23.05.0_amlogic_s905l3b_bullseye_6.1.23_server_2023.04.13.img.gz
2. docker 、 desktop安装成功

3.emmc 烧入成功并能正常启动，串口能正常输出日志。HDMI 挂载有报错：
[ 7.200995] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 7.233686] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d)
[ 7.236152] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops meson_dw_hdmi_ops): -19
[ 7.244524] meson-drm d0100000.vpu: Couldn't bind all components
[ 7.250843] meson-drm d0100000.vpu: master bind failed: -19
[ 7.258192] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
4. 设备照片如下 CM211-1 \ CMIT ID:2019AP10286

[peterhuang007]

系统启动日志：
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.177-ophub (root@fv-az491-406) (aarch64-none-linux-gnu-gcc (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 12.2.1 20221205, GNU ld (Arm GNU Toolchain 12.2.Rel1 (Build arm-12.24)) 2.39.0.20221210) #1 SMP PREEMPT Thu Apr 20 04:49:14 EDT 2023
[    0.000000] Machine model: Amlogic Meson GXL (S905L3b) MBH-M302A Box
[    0.000000] efi: UEFI not found.
[    0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'hwrom@0': base 0x0000000000000000, size 16 MiB
[    0.000000] Reserved memory: created CMA memory pool at 0x000000006ac00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005000000-0x00000000072fffff]
[    0.000000]   node   0: [mem 0x0000000007300000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 22 pages/cpu s51288 r8192 d30632 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516096
[    0.000000] Kernel command line: root=UUID=d1474422-6371-4e6a-9bd0-bc862b142d8a rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=f6:e0:01:ef:bb:d0
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1699560K/2097152K available (14656K kernel code, 2652K rwdata, 5808K rodata, 3840K init, 882K bss, 135448K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000380] Console: colour dummy device 80x25
[    0.000744] printk: console [tty0] enabled
[    0.000784] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.000808] pid_max: default: 32768 minimum: 301
[    0.001084] LSM: Security Framework initializing
[    0.001174] SELinux:  Initializing.
[    0.001387] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001411] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003439] rcu: Hierarchical SRCU implementation.
[    0.004803] EFI services will not be available.
[    0.005239] smp: Bringing up secondary CPUs ...
[    0.005894] Detected VIPT I-cache on CPU1
[    0.005957] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.006642] Detected VIPT I-cache on CPU2
[    0.006693] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.007387] Detected VIPT I-cache on CPU3
[    0.007434] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.007533] smp: Brought up 1 node, 4 CPUs
[    0.007600] SMP: Total of 4 processors activated.
[    0.007613] CPU features: detected: 32-bit EL0 Support
[    0.007626] CPU features: detected: CRC32 instructions
[    0.007638] CPU features: detected: 32-bit EL1 Support
[    0.008293] CPU: All CPU(s) started at EL2
[    0.008322] alternatives: patching kernel code
[    0.009378] devtmpfs: initialized
[    0.016296] Registered cp15_barrier emulation handler
[    0.016335] Registered setend emulation handler
[    0.016501] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.016532] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.023686] prandom: seed boundary self test passed
[    0.025194] prandom: 100 self tests passed
[    0.048130] prandom32: self test passed (less than 6 bits correlated)
[    0.048182] pinctrl core: initialized pinctrl subsystem
[    0.048765] DMI not present or invalid.
[    0.049270] NET: Registered protocol family 16
[    0.051503] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.051680] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.051885] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.052038] audit: initializing netlink subsys (disabled)
[    0.052322] audit: type=2000 audit(0.049:1): state=initialized audit_enabled=0 res=1
[    0.053370] thermal_sys: Registered thermal governor 'step_wise'
[    0.053663] cpuidle: using governor ladder
[    0.053886] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.054002] ASID allocator initialised with 65536 entries
[    0.054234] Serial: AMBA PL011 UART driver
[    0.084173] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.084204] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.084217] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084230] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.582785] cryptd: max_cpu_qlen set to 1000
[    1.586538] "cryptomgr_test" (93) uses obsolete ecb(arc4) skcipher
[    1.598912] alg: No test for 842 (842-generic)
[    1.599071] alg: No test for 842 (842-scomp)
[    1.695817] DRBG: Continuing without Jitter RNG
[    1.762323] raid6: neonx8   gen()  2221 MB/s
[    1.819049] raid6: neonx8   xor()  1612 MB/s
[    1.875779] raid6: neonx4   gen()  2188 MB/s
[    1.932515] raid6: neonx4   xor()  1536 MB/s
[    1.989244] raid6: neonx2   gen()  2080 MB/s
[    2.045977] raid6: neonx2   xor()  1422 MB/s
[    2.102718] raid6: neonx1   gen()  1789 MB/s
[    2.159445] raid6: neonx1   xor()  1221 MB/s
[    2.216166] raid6: int64x8  gen()  1414 MB/s
[    2.272898] raid6: int64x8  xor()   740 MB/s
[    2.329620] raid6: int64x4  gen()  1569 MB/s
[    2.386369] raid6: int64x4  xor()   808 MB/s
[    2.443082] raid6: int64x2  gen()  1398 MB/s
[    2.499814] raid6: int64x2  xor()   749 MB/s
[    2.556543] raid6: int64x1  gen()  1036 MB/s
[    2.613254] raid6: int64x1  xor()   517 MB/s
[    2.613265] raid6: using algorithm neonx8 gen() 2221 MB/s
[    2.613276] raid6: .... xor() 1612 MB/s, rmw enabled
[    2.613288] raid6: using neon recovery algorithm
[    2.613514] fbcon: Taking over console
[    2.613556] ACPI: Interpreter disabled.
[    2.615708] iommu: Default domain type: Translated 
[    2.616100] vgaarb: loaded
[    2.616680] SCSI subsystem initialized
[    2.616940] usbcore: registered new interface driver usbfs
[    2.616985] usbcore: registered new interface driver hub
[    2.617042] usbcore: registered new device driver usb
[    2.617528] mc: Linux media interface: v0.10
[    2.617574] videodev: Linux video capture interface: v2.00
[    2.617855] EDAC MC: Ver: 3.0.0
[    2.618939] Advanced Linux Sound Architecture Driver Initialized.
[    2.620287] clocksource: Switched to clocksource arch_sys_counter
[    2.620683] VFS: Disk quotas dquot_6.6.0
[    2.620776] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.620925] FS-Cache: Loaded
[    2.621465] pnp: PnP ACPI: disabled
[    2.628201] NET: Registered protocol family 2
[    2.628404] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.629594] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.629656] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.629826] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.630036] TCP: Hash tables configured (established 16384 bind 16384)
[    2.630357] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    2.630460] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.630513] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.630710] NET: Registered protocol family 1
[    2.630756] NET: Registered protocol family 44
[    2.630780] PCI: CLS 0 bytes, default 64
[    2.631001] Trying to unpack rootfs image as initramfs...
[    3.354997] Freeing initrd memory: 16704K
[    3.355888] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    3.356393] kvm [1]: IPA Size Limit: 40 bits
[    3.357358] kvm [1]: vgic interrupt IRQ9
[    3.357492] kvm [1]: Hyp mode initialized successfully
[    3.551686] Initialise system trusted keyrings
[    3.551979] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.558281] zbud: loaded
[    3.559972] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.560652] fuse: init (API version 7.32)
[    3.561186] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    3.601460] NET: Registered protocol family 38
[    3.656967] xor: measuring software checksum speed
[    3.661164]    8regs           :  2366 MB/sec
[    3.664696]    32regs          :  2802 MB/sec
[    3.669331]    arm64_neon      :  2131 MB/sec
[    3.669342] xor: using function: 32regs (2802 MB/sec)
[    3.669363] Key type asymmetric registered
[    3.669375] Asymmetric key parser 'x509' registered
[    3.669447] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.669637] io scheduler mq-deadline registered
[    3.669653] io scheduler kyber registered
[    3.669849] io scheduler bfq registered
[    3.730151] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected
[    3.732826] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    3.734919] Serial: AMBA driver
[    3.735338] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[    4.702969] printk: console [ttyAML0] enabled
[    4.717192] brd: module loaded
[    6.963652] loop: module loaded
[    6.970683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.971597] ehci-pci: EHCI PCI platform driver
[    6.976068] ehci-platform: EHCI generic platform driver
[    6.981827] usbcore: registered new interface driver cdc_wdm
[    6.986834] usbcore: registered new interface driver usb-storage
[    6.993256] mousedev: PS/2 mouse device common for all mice
[    7.000061] i2c /dev entries driver
[    7.004029] Registered IR keymap rc-cec
[    7.005602] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[    7.013847] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input0
[    7.026246] Synopsys Designware Multimedia Card Interface Driver
[    7.029920] meson-gx-mmc d0072000.mmc: Got CD GPIO
[    7.029960] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[    7.031122] meson-sm: secure-monitor enabled
[    7.033926] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[    7.051005] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[    7.062509] hid: raw HID events driver (C) Jiri Kosina
[    7.063577] usbcore: registered new interface driver usbhid
[    7.068973] usbhid: USB HID core driver
[    7.073201] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[BL31]: tee size: 0
[    7.087536] Initializing XFRM netlink socket
[    7.088188] NET: Registered protocol family 10
[    7.121919] Segment Routing with IPv6
[    7.121962] RPL Segment Routing with IPv6
[    7.124138] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    7.130920] NET: Registered protocol family 17
[    7.134287] NET: Registered protocol family 15
[    7.138784] 8021q: 802.1Q VLAN Support v1.8
[    7.143274] registered taskstats version 1
[    7.146816] Loading compiled-in X.509 certificates
[    7.153989] zswap: loaded using pool zstd/zbud
[    7.156448] Key type .fscrypt registered
[    7.159864] Key type fscrypt-provisioning registered
[    7.166057] Btrfs loaded, crc32c=crc32c-generic
[    7.170972] mmc2: new DDR MMC card at address 0001
[    7.174871] mmcblk2: mmc2:0001 SPeMMC 7.22 GiB 
[    7.178974] mmcblk2boot0: mmc2:0001 SPeMMC partition 1 4.00 MiB
[    7.184831] mmcblk2boot1: mmc2:0001 SPeMMC partition 2 4.00 MiB
[    7.190479] mmcblk2rpmb: mmc2:0001 SPeMMC partition 3 4.00 MiB, chardev (241:0)
[    7.199723]  mmcblk2: p1 p2
[    7.200995] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[    7.233686] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d)
[    7.236152] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops meson_dw_hdmi_ops): -19
[    7.244524] meson-drm d0100000.vpu: Couldn't bind all components
[    7.250843] meson-drm d0100000.vpu: master bind failed: -19
[    7.258192] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[    7.262564] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[    7.268785] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[    7.274617] meson8b-dwmac c9410000.ethernet: no reset control found
[    7.281768] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    7.287999] meson8b-dwmac c9410000.ethernet: 	DWMAC1000
[    7.293072] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[    7.300487] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[    7.307904] meson8b-dwmac c9410000.ethernet: COE Type 2
[    7.313079] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[    7.320064] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[    7.326448] meson8b-dwmac c9410000.ethernet: Normal descriptors
[    7.332312] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[    7.338094] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    7.349124] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[    7.351231] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[    7.868266] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[    7.869929] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[    7.877182] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    7.886065] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    7.889551] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    7.897054] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[    7.906234] xhci-hcd xhci-hcd.0.auto: irq 47, io mem 0xc9000000
[    7.912269] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    7.917702] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    7.925082] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    7.931691] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    7.939730] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.946887] usb usb1: Product: xHCI Host Controller
[    7.951717] usb usb1: Manufacturer: Linux 5.10.177-ophub xhci-hcd
[    7.957754] usb usb1: SerialNumber: xhci-hcd.0.auto
[    7.963077] hub 1-0:1.0: USB hub found
[    7.966327] hub 1-0:1.0: 2 ports detected
[    7.970674] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.978394] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    7.986478] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.993643] usb usb2: Product: xHCI Host Controller
[    7.998465] usb usb2: Manufacturer: Linux 5.10.177-ophub xhci-hcd
[    8.004502] usb usb2: SerialNumber: xhci-hcd.0.auto
[    8.009895] hub 2-0:1.0: USB hub found
[    8.013075] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    8.024378] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[    8.024895] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_dvfs_info 000c
[    8.059513] ALSA device list:
[    8.059554]   No soundcards found.
[    8.062202] Freeing unused kernel memory: 3840K
[    8.073723] Run /init as init process
[    8.079871] mmc0: new high speed SDIO card at address 8800
[    8.619354] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
[    8.620123] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
[    8.626440] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
[    8.632803] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache line, 128bit external bus
[    8.640761] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache line, 128bit external bus
[    8.649756] lima d00c0000.gpu: bus rate = 166666504
[    8.654427] lima d00c0000.gpu: mod rate = 24000000
[    8.659210] lima d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[    8.668968] [drm] Initialized lima 1.1.0 20191231 for d00c0000.gpu on minor 0
[   10.386432] EXT4-fs (mmcblk2p2): mounted filesystem with writeback data mode. Opts: data=writeback
[   10.842751] systemd[1]: System time before build time, advancing clock.
[   10.905053] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   10.923684] systemd[1]: Detected architecture arm64.
[   10.932916] systemd[1]: Set hostname to <armbian>.
[   11.150359] systemd[421]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[   11.418741] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[   11.617027] systemd[1]: Queued start job for default target Graphical Interface.
[   11.621063] random: systemd: uninitialized urandom read (16 bytes read)
[   11.654482] systemd[1]: Created slice system-getty.slice.
[   11.655196] random: systemd: uninitialized urandom read (16 bytes read)
[   11.663078] systemd[1]: Created slice system-modprobe.slice.
[   11.666850] random: systemd: uninitialized urandom read (16 bytes read)
[   11.675626] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   11.682048] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   11.687726] systemd[1]: Created slice User and Session Slice.
[   11.691989] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.700073] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   11.709100] systemd[1]: Reached target Slices.
[   11.712793] systemd[1]: Reached target Swap.
[   11.716931] systemd[1]: Reached target System Time Set.
[   11.741439] systemd[1]: Listening on RPCbind Server Activation Socket.
[   11.743655] systemd[1]: Listening on Syslog Socket.
[   11.748430] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.754695] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   11.761731] systemd[1]: Listening on Journal Audit Socket.
[   11.766912] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.773069] systemd[1]: Listening on Journal Socket.
[   11.777455] systemd[1]: systemd-networkd.socket: Socket service systemd-networkd.service not loaded, refusing.
[   11.786516] systemd[1]: Failed to listen on Network Service Netlink Socket.
[   11.794960] systemd[1]: Listening on udev Control Socket.
[   11.799845] systemd[1]: Listening on udev Kernel Socket.
[   11.830779] systemd[1]: Mounting Huge Pages File System...
[   11.836336] systemd[1]: Mounting POSIX Message Queue File System...
[   11.843746] systemd[1]: Mounting RPC Pipe File System...
[   11.849858] systemd[1]: Mounting Kernel Debug File System...
[   11.851005] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[   11.858832] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   11.873274] RPC: Registered named UNIX socket transport module.
[   11.873579] RPC: Registered udp transport module.
[   11.874429] systemd[1]: Starting Restore / save the current clock...
[   11.878348] RPC: Registered tcp transport module.
[   11.889287] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.901655] systemd[1]: Starting Wait for network to be configured by ifupdown...
[   11.909777] systemd[1]: Starting Set the console keyboard layout...
[   11.917317] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   11.926830] systemd[1]: Starting Load Kernel Module configfs...
[   11.933046] systemd[1]: Starting Load Kernel Module drm...
[   11.939229] systemd[1]: Starting Load Kernel Module fuse...
[   11.942765] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   11.949289] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   11.958404] systemd[1]: Starting Load Kernel Modules...
[   11.969729] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.977359] systemd[1]: Starting Coldplug All udev Devices...
[   11.988925] systemd[1]: Mounted Huge Pages File System.
[   11.990050] systemd[1]: Mounted POSIX Message Queue File System.
[   11.995757] systemd[1]: Mounted RPC Pipe File System.
[   12.000826] systemd[1]: Mounted Kernel Debug File System.
[   12.007949] systemd[1]: Finished Restore / save the current clock.
[   12.014325] systemd[1]: Finished Wait for network to be configured by ifupdown.
[   12.019936] EXT4-fs (mmcblk2p2): re-mounted. Opts: commit=600,errors=remount-ro
[   12.021256] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   12.061540] systemd[1]: modprobe@configfs.service: Succeeded.
[   12.062968] systemd[1]: Finished Load Kernel Module configfs.
[   12.069171] systemd[1]: modprobe@drm.service: Succeeded.
[   12.074119] systemd[1]: Finished Load Kernel Module drm.
[   12.079592] systemd[1]: modprobe@fuse.service: Succeeded.
[   12.084779] systemd[1]: Finished Load Kernel Module fuse.
[   12.091174] systemd[1]: Finished Load Kernel Modules.
[   12.096079] systemd[1]: Finished Remount Root and Kernel File Systems.
[   12.107286] systemd[1]: Mounting FUSE Control File System...
[   12.112636] systemd[1]: Mounting Kernel Configuration File System...
[   12.118178] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   12.122387] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   12.136208] systemd[1]: Starting Load/Save Random Seed...
[   12.142291] systemd[1]: Starting Apply Kernel Variables...
[   12.148658] systemd[1]: Starting Create System Users...
[   12.159538] systemd[1]: Mounted FUSE Control File System.
[   12.161112] systemd[1]: Mounted Kernel Configuration File System.
[   12.288041] systemd[1]: Finished Set the console keyboard layout.
[   12.351247] systemd[1]: Finished Create System Users.
[   12.356832] systemd[1]: Starting Create Static Device Nodes in /dev...
[   12.365968] systemd[1]: Finished Apply Kernel Variables.
[   12.424154] systemd[1]: Finished Create Static Device Nodes in /dev.
[   12.425894] systemd[1]: Reached target Local File Systems (Pre).
[   12.447745] systemd[1]: Mounting /tmp...
[   12.456112] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[   12.468356] systemd[1]: Mounted /tmp.
[   12.474399] systemd[1]: Finished Coldplug All udev Devices.
[   12.480467] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[   12.492023] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[   12.657236] systemd[1]: Started Rule-based Manager for Device Events and Files.
[   12.660236] random: systemd: uninitialized urandom read (16 bytes read)
[   12.687718] systemd[1]: Starting Show Plymouth Boot Screen...
[   12.710874] systemd[1]: Received SIGRTMIN+20 from PID 502 (plymouthd).
[   12.742890] systemd[1]: Started Show Plymouth Boot Screen.
[   12.743957] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[[   12.758441] random: systemd: uninitialized urandom read (16 bytes read)
[   12.763680] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
  O[   12.771502] random: systemd: uninitialized urandom read (16 bytes read)
[   12.777888] systemd[1]: Reached target Local Encrypted Volumes.
K   systemd[1]: Reached target Paths.
[0m] Started Show Plymouth Boot Screen.
[  OK  ] Started Forward Password R…s to Plymouth Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
[   13.042501] Registered IR keymap rc-empty
[   13.042671] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[   13.052429] systemd[1]: Found device /dev/ttyAML0.
[  OK  ] Found device /dev/ttyAML0.
[   13.060397] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[   13.070437] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input1
[   13.109447] meson-ir c8100580.ir: receiver initialized
[   13.122196] systemd[1]: Reached target Hardware activated USB gadget.
[   13.123449] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
0;32m  OK  ] Reached target Hardware activated USB gadget.
[   13.342371] systemd[1]: Found device /dev/disk/by-label/BOOT_EMMC.
[  OK  ] Found device /dev/disk/by-label/BOOT_EMMC.
[   13.394468] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT_EMMC...
         Starting File System Check…dev/disk/by-label/BOOT_EMMC...
[   13.438476] systemd[1]: Started File System Check Daemon to report status.
[  OK  ] Started File System Check Daemon to report status.
[   13.715114] random: systemd: uninitialized urandom read (16 bytes read)
[   13.716207] random: systemd: uninitialized urandom read (16 bytes read)
[   13.787767] random: systemd: uninitialized urandom read (16 bytes read)
[   13.793868] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT_EMMC.
[  OK  ] Finished File System Check… /dev/disk/by-label/BOOT_EMMC.
[   13.815173] systemd[1]: Mounting /boot...
         Mounting /boot...
[   13.834731] systemd[1]: Mounted /boot.
[  OK  ] Moun[   13.835564] systemd[1]: Reached target Local File Systems.
ted /boot.
[  OK  [   13.846234] systemd[1]: Starting Armbian leds state...
] Reached target Local F[   13.854636] systemd[1]: Starting Armbian ZRAM config...
ile Systems.
         Starting Armbian leds state[   13.864015] systemd[1]: Starting Set console font and keymap...
...
         Starting Armb[   13.873672] random: crng init done
[   13.875603] systemd[1]: Starting Raise network interfaces...
[   13.881241] random: 98 urandom warning(s) missed due to ratelimiting
ian ZRAM config...
         Sta[   13.893079] systemd[1]: Starting Preprocess NFS configuration...
rting Set console font and keymap...
         Starting[   13.903045] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
 Raise network interfaces systemd[1]: Finished Load/Save Random Seed.
[0m...
         Starting P[   13.921931] systemd[1]: Finished Set console font and keymap.
reprocess NFS configuration...
    [   13.930753] systemd[1]: Finished Armbian leds state.
     Starting Tell Plymouth To[   13.938427] systemd[1]: nfs-config.service: Succeeded.
[   13.945573] systemd[1]: Finished Preprocess NFS configuration.
 Write Out [   13.952585] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
Runtim[   13.958289] systemd[1]: Received SIGRTMIN+20 from PID 502 (plymouthd).
[   13.964495] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[   13.972595] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[   13.982825] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[   13.991357] systemd[1]: Reached target NFS client services.
e Da[   13.997222] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[   14.007070] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
ta...
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Armbian leds state.
[  OK  ] Finished Preprocess NFS configuration.
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Reached target NFS client services.
[   14.077017] zram: Added device: zram0
[   14.078659] zram: Added device: zram1
[   14.080155] zram: Added device: zram2
[   14.153129] zram0: detected capacity change from 0 to 1014910976
[   14.184254] systemd[1]: Finished Raise network interfaces.
[  OK  ] Finished Raise network interfaces.
[   14.213649] Adding 991120k swap on /dev/zram0.  Priority:5 extents:1 across:991120k SSFS
[   14.364950] zram1: detected capacity change from 0 to 52428800
[   14.411583] systemd[1]: Finished Armbian ZRAM config.
[  OK  ] Finished Armbian ZRAM config.
[   14.432709] systemd[1]: Starting Armbian memory supported logging...
         Starting Armbian memory supported logging...
[   14.505301] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[   14.506919] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[   17.908081] systemd[1]: Finished Armbian memory supported logging.
[  OK  ] Finished Armbian memory supported logging.
[   17.948079] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[   18.155952] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[   18.222874] systemd-journald[709]: Received client request to flush runtime journal.
[  OK  ] Finished Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Create Volatile Files and Directories.
[  OK  ] Started Entropy Daemon based on the HAVEGE algorithm.
         Starting RPC bind portmap service...
         Starting Network Name Resolution...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Docker Socket for the API.
[  OK  ] Listening on OpenBSD Secure Shell server socket.
         Starting Armbian hardware monitoring...
         Starting Armbian hardware optimization...
[  OK  ] Started RPC bind portmap service.
[  OK  ] Listening on Docker Socket for the API.
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote Encrypted Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target RPC Port Mapper.
[  OK  ] Reached target Sockets.
[  OK  ] Finished Armbian hardware monitoring.
[  OK  ] Finished Armbian hardware optimization.
[  OK  ] Reached target Basic System.
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
         Starting LSB: Load kernel …d to enable cpufreq scaling...
         Starting LSB: rng-tools (Debian variant)...
         Starting System Logging Service...
         Starting Self Monitoring a…g Technology (SMART) Daemon...
         Starting Resets System Activity Logs...
         Starting User Login Management...
         Starting WPA supplicant...
[  OK  ] Finished Resets System Activity Logs.
[  OK  ] Started System Logging Service.
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  OK  ] Started LSB: rng-tools (Debian variant).
[  OK  ] Started Self Monitoring an…ing Technology (SMART) Daemon.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Network Manager.
         Starting Network Manager Wait Online...
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Network.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting chrony, an NTP client/server...
         Starting containerd container runtime...
         Starting OpenVPN service...
         Starting Notify NFS peers of a restart...
         Starting Permit User Sessions...
[  OK  ] Started vnStat network traffic monitor.
[  OK  ] Finished OpenVPN service.
[  OK  ] Finished Permit User Sessions.
         Starting Light Display Manager...
[  OK  ] Started User Login Management.
[  OK  ] Started Unattended Upgrades Shutdown.
[  OK  ] Started Notify NFS peers of a restart.
         Starting Hostname Service...
[  OK  ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
         Starting LSB: set CPUFreq kernel parameters...
[   20.557837] meson8b-dwmac c9410000.ethernet eth0: PHY [0.e40908ff:08] driver [Meson GXL Internal PHY] (irq=48)
[   22.090302] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[   22.092255] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[   22.099719] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rmii link mode
[   24.333275] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[   24.336291] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   27.736124] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   27.746257] Bridge firewalling registered

Armbian 23.05.0-trunk Bullseye ttyAML0 

armbian login: 
armbian login: 
armbian login: 
armbian login: root
Password: 
    _              _      ____  ___   ___  ____  _ _____ _     
   / \   _ __ ___ | |    / ___|/ _ \ / _ \| ___|| |___ /| |__  
  / _ \ | '_ ` _ \| |____\___ \ (_) | | | |___ \| | |_ \| '_ \ 
 / ___ \| | | | | | |_____|__) \__, | |_| |___) | |___) | |_) |
/_/   \_\_| |_| |_|_|    |____/  /_/ \___/|____/|_|____/|_.__/ 
                                                               
Welcome to Armbian 23.05.0-trunk Bullseye with Linux 5.10.177-ophub

System load:   2%           	Up time:       7 min	
Memory usage:  8% of 1.89G  	IP:	       172.31.0.1 192.168.3.23
CPU temp:      45°C           	Usage of /:    30% of 6.7G   	
RX today:      82.0 MiB  	

[qwasddd]

n你这个是增强版吗？TTL 是怎么接线的？

[ophub]

有些魔百盒目前HDMI无法使用

[alcatraz-zz]

有些魔百盒目前HDMI无法使用

hdmi能用的型号是什么？M401A, HG680LC, CM311-1, CM211-1, UNT403A ?

[gametta]

可以使用的401a，311，b863av3.2-m以上三种测试过

[alcatraz-zz]

刚才买了个M401A 😁