Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

章鱼星球刷机方法 #253

Closed
lanyucomputer opened this issue Apr 21, 2022 · 118 comments
Closed

章鱼星球刷机方法 #253

lanyucomputer opened this issue Apr 21, 2022 · 118 comments
Labels
documentation Improvements or additions to documentation support This need is supported

Comments

@lanyucomputer
Copy link

章鱼星球刷了这个Armbian_22.05.0_Aml_s912_focal_5.15.35_2022.04.21.0021.img.gz，已经写入EMMC成功，启动不了，启动也没有显示输出，刷入W大的Armbian_5.96_Aml-g12_Debian_buster_default_5.3.0-rc8_20190910，成功启动后可以从EMMC启动，也可以HDMI有显示输出
@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 21, 2022 •
edited by ophub 

WARNING! The remote SSH server rejected X11 forwarding request.
    _              _        ___  _ ____  
   / \   _ __ ___ | |  ___ / _ \/ |___ \ 
  / _ \ | '_ ` _ \| | / __| (_) | | __) |
 / ___ \| | | | | | | \__ \\__, | |/ __/ 
/_/   \_\_| |_| |_|_| |___/  /_/|_|_____|
                                         
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.15.35-flippy-72+o

No end-user support: built from trunk

System load:   2%           	Up time:       8 min	
Memory usage:  13% of 1.77G  	IP:	       10.0.0.113
CPU temp:      48°C           	Usage of /:    49% of 2.6G   	
storage/:      38% of 255M   	

[ 7 security updates available, 14 updates total: apt upgrade ]
Last check: 2022-04-21 20:43

[ General system configuration (beta): armbian-config ]

Last login: Thu Apr 21 20:43:40 2022 from 10.0.0.104

Waiting for system to finish booting ...
Welcome to ARMBIAN! 

Documentation: https://docs.armbian.com | Community: https://forum.armbian.com

Create root password: ***********
Repeat root password: ***********

Support status: no support (unsupported userspace)

Choose default system command shell:

1) bash
2) zsh

Shell: ZSH

Creating a new user account. Press <Ctrl-C> to abort

Please provide a username (eg. your first name): ^C
Disabling user account creation procedure


You selected ZSH as your default shell. If you want to use it right away, please logout and login! 

root@armbian:~# ls
root@armbian:~# lsblk
NAME         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda            8:0    1  15.2G  0 disk 
├─sda1         8:1    1   255M  0 part /boot
└─sda2         8:2    1   2.7G  0 part /
mmcblk2      179:0    0   7.3G  0 disk 
├─mmcblk2p1  179:1    0   122M  0 part 
└─mmcblk2p2  179:2    0   6.5G  0 part 
mmcblk2boot0 179:32   0     4M  1 disk 
mmcblk2boot1 179:64   0     4M  1 disk 
zram0        254:0    0 904.8M  0 disk [SWAP]
zram1        254:1    0    50M  0 disk /var/log
zram2        254:2    0 904.8M  0 disk /var/tmp
root@armbian:~# armbian-install
Start install armbian to emmc...
DEV_EMMC: /dev/mmcblk2
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                                               
--------------------------------------------------------------------------------------
101   s905d      Phicomm-N1                     meson-gxl-s905d-phicomm-n1.dtb                    
102   s905d      Phicomm-N1-(DMA-thresh)        meson-gxl-s905d-phicomm-n1-thresh.dtb             
103   s905x      hg680p-&-b860h                 meson-gxl-s905x-p212.dtb                          
104   s905w      X96-Mini-&-TX3-Mini            meson-gxl-s905w-tx3-mini.dtb                      
105   s905d      MECOOL-KI-Pro                  meson-gxl-s905d-mecool-ki-pro.dtb                 
201   s912       Octopus-Planet                 meson-gxm-octopus-planet.dtb                      
202   s912       H96-Pro-Plus                   meson-gxm-octopus-planet.dtb                      
203   s912       Tanix-TX92                     meson-gxm-octopus-planet.dtb                      
204   s912       VORKE-Z6-Plus                  meson-gxm-octopus-planet.dtb                      
205   s912       MECOOL-M8S-Pro-L               meson-gxm-q201.dtb                                
301   s905x2     X96-Max-4GB                    meson-g12a-x96-max.dtb                            
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb                       
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb                             
401   s922x      Beelink-GT-King                meson-g12b-gtking.dtb                             
402   s922x      Beelink-GT-King-Pro            meson-g12b-gtking-pro.dtb                         
403   s922x      Beelink-GT-King-Pro-H          meson-g12b-gtking-pro-h.dtb                       
404   s922x      Beelink-GT-King-Pro-Rev_A      meson-g12b-gtking-pro.dtb                         
405   s922x      Hardkernel-ODroid-N2           meson-g12b-odroid-n2.dtb                          
406   s922x      UGOOS-AM6-Plus                 meson-g12b-ugoos-am6.dtb                          
407   a311d      Khadas-VIM3                    meson-g12b-a311d-khadas-vim3.dtb                  
501   s905x3     X96-Max+                       meson-sm1-x96-max-plus.dtb                        
502   s905x3     X96-Max+-(OverClock)           meson-sm1-x96-max-plus-oc.dtb                     
503   s905x3     HK1-Box                        meson-sm1-hk1box-vontar-x3.dtb                    
504   s905x3     HK1-Box-(OverClock)            meson-sm1-hk1box-vontar-x3-oc.dtb                 
505   s905x3     H96-Max-X3                     meson-sm1-h96-max-x3.dtb                          
506   s905x3     H96-Max-X3-(OverClock)         meson-sm1-h96-max-x3-oc.dtb                       
507   s905x3     Ugoos-X3                       meson-sm1-ugoos-x3.dtb                            
508   s905x3     Ugoos-X3-(OverClock)           meson-sm1-ugoos-x3-oc.dtb                         
509   s905x3     TX3-1Gb                        meson-sm1-tx3-qz.dtb                              
510   s905x3     TX3-1Gb-(OverClock)            meson-sm1-tx3-qz-oc.dtb                           
511   s905x3     TX3-100Mb                      meson-sm1-tx3-bz.dtb                              
512   s905x3     TX3-100Mb-(OverClock)          meson-sm1-tx3-bz-oc.dtb                           
513   s905x3     X96-Air-1Gb                    meson-sm1-x96-air-gbit.dtb                        
514   s905x3     X96-Air-100Mb                  meson-sm1-x96-air.dtb                             
515   s905x3     A95XF3-Air-1Gb                 meson-sm1-a95xf3-air-gbit.dtb                     
516   s905x3     A95XF3-Air-100Mb               meson-sm1-a95xf3-air.dtb                          
0     Other      Unknown                        Import-custom-dtb-file                            
--------------------------------------------------------------------------------------
Please Input ID: 201
Input Box ID: [ 201 ]
FDTFILE: [ meson-gxm-octopus-planet.dtb ]
UBOOT_OVERLOAD: [ u-boot-zyxq.bin ]
K510: [ 0 ]
--------------------------------------------
Please select the type of file system:
1. ext4
2. btrfs
--------------------------------------------
Please Input ID: 1
Input Type ID: [ 1 ]
The type of file system: [ ext4 ]
Start backup default bootloader
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 1.53746 s, 2.7 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00209663 s, 244 kB/s
Start create MBR and partittion
Start copy system for eMMC.
Formatting BOOTFS partition...
mkfs.fat 4.1 (2017-01-24)
Start copy BOOT_EMMC partition data...
Generate the new uEnv.txt file.
Formatting ROOTFS partition...
Start copy ROOTFS_EMMC partition data...
copy [ etc ] ...
copy [ home ] ...
copy [ lib64 ] ...
copy [ opt ] ...
copy [ root ] ...
copy [ selinux ] ...
copy [ srv ] ...
copy [ usr ] ...
copy [ var ] ...
Copy complete.
Generate the new fstab file.
Update the relevant parameters
*************************************************************************************************
Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
******************************************************************************************

@lanyucomputer
Copy link
Author

Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
这个显示是写入成功的

@ophub
Copy link
Owner

ophub commented Apr 21, 2022

试试5.10版本的

@lanyucomputer
Copy link
Author

现在黑屏了，也从U盘启动不了了
正在先刷安卓包，看行不行

@ophub
Copy link
Owner

ophub commented Apr 21, 2022

https://github.com/ophub/kernel/releases/tag/tools
这有工具和安卓固件

@lanyucomputer
Copy link
Author

我刷 了W大提供的h96pro移植线刷包还是U盘启动不了了

@ophub
Copy link
Owner

ophub commented Apr 21, 2022

你试试刷我发的链接里的安卓系统，听说复位按钮3秒可以进入USB启动

@lanyucomputer
Copy link
Author

Reboot to LibreELEC ：一款安卓系统下重启启动TF卡系统的APK应用，需要root权限,我用了这个软件进入U盘系统了

@lanyucomputer
Copy link
Author

你的刷 了HDMI有输出吗？我可以用U盘启动的时候也是没有输出的，我等它启动差不多了，用的SSH登陆的，但写入EMMC后启动不了，又在重新搞

@ophub
Copy link
Owner

ophub commented Apr 21, 2022

我没这个设备，我是根据OpenWrt里的设置，一样的。你刷OpenWrt可以正常HDMI显示吗？
要不你先刷F大的OpenWrt试试

@lanyucomputer
Copy link
Author

先刷H96的安卓包，然后用U盘复制安装Reboot to LibreELEC.apk的APP，重启迅速插入另外一个U盘写好镜像Armbian_5.96_Aml-g12_Debian_buster_default_5.3.0-rc8_20190910插到USB口，这时系统重启进U盘的armbian5.96开始跑码，进系统 后运行./install.sh,把系统 写入到EMMC，剩下的就是来折腾你的这个包了

@lanyucomputer
Copy link
Author

刷OPENWRT,可以正常进U盘系统，HDMI显示也没有输出

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 21, 2022 •
edited by ophub 

Connecting to 10.0.0.113:22...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.

WARNING! The remote SSH server rejected X11 forwarding request.
    _              _        ___  _ ____  
   / \   _ __ ___ | |  ___ / _ \/ |___ \ 
  / _ \ | '_ ` _ \| | / __| (_) | | __) |
 / ___ \| | | | | | | \__ \\__, | |/ __/ 
/_/   \_\_| |_| |_|_| |___/  /_/|_|_____|
                                         
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.15.35-flippy-72+o

No end-user support: built from trunk

System load:   18%           	Up time:       4 min	
Memory usage:  12% of 1.77G  	IP:	       10.0.0.113
CPU temp:      52°C           	Usage of /:    49% of 2.6G   	
storage/:      38% of 255M   	

[ 7 security updates available, 14 updates total: apt upgrade ]
Last check: 2022-04-21 22:36

Last login: Thu Apr 21 22:36:16 2022 from 10.0.0.104
armbian:~:# ls
armbian:~:# armbian-install
Start install armbian to emmc...
DEV_EMMC: /dev/mmcblk2
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                                               
--------------------------------------------------------------------------------------
101   s905d      Phicomm-N1                     meson-gxl-s905d-phicomm-n1.dtb                    
102   s905d      Phicomm-N1-(DMA-thresh)        meson-gxl-s905d-phicomm-n1-thresh.dtb             
103   s905x      hg680p-&-b860h                 meson-gxl-s905x-p212.dtb                          
104   s905w      X96-Mini-&-TX3-Mini            meson-gxl-s905w-tx3-mini.dtb                      
105   s905d      MECOOL-KI-Pro                  meson-gxl-s905d-mecool-ki-pro.dtb                 
201   s912       Octopus-Planet                 meson-gxm-octopus-planet.dtb                      
202   s912       H96-Pro-Plus                   meson-gxm-octopus-planet.dtb                      
203   s912       Tanix-TX92                     meson-gxm-octopus-planet.dtb                      
204   s912       VORKE-Z6-Plus                  meson-gxm-octopus-planet.dtb                      
205   s912       MECOOL-M8S-Pro-L               meson-gxm-q201.dtb                                
301   s905x2     X96-Max-4GB                    meson-g12a-x96-max.dtb                            
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb                       
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb                             
401   s922x      Beelink-GT-King                meson-g12b-gtking.dtb                             
402   s922x      Beelink-GT-King-Pro            meson-g12b-gtking-pro.dtb                         
403   s922x      Beelink-GT-King-Pro-H          meson-g12b-gtking-pro-h.dtb                       
404   s922x      Beelink-GT-King-Pro-Rev_A      meson-g12b-gtking-pro.dtb                         
405   s922x      Hardkernel-ODroid-N2           meson-g12b-odroid-n2.dtb                          
406   s922x      UGOOS-AM6-Plus                 meson-g12b-ugoos-am6.dtb                          
407   a311d      Khadas-VIM3                    meson-g12b-a311d-khadas-vim3.dtb                  
501   s905x3     X96-Max+                       meson-sm1-x96-max-plus.dtb                        
502   s905x3     X96-Max+-(OverClock)           meson-sm1-x96-max-plus-oc.dtb                     
503   s905x3     HK1-Box                        meson-sm1-hk1box-vontar-x3.dtb                    
504   s905x3     HK1-Box-(OverClock)            meson-sm1-hk1box-vontar-x3-oc.dtb                 
505   s905x3     H96-Max-X3                     meson-sm1-h96-max-x3.dtb                          
506   s905x3     H96-Max-X3-(OverClock)         meson-sm1-h96-max-x3-oc.dtb                       
507   s905x3     Ugoos-X3                       meson-sm1-ugoos-x3.dtb                            
508   s905x3     Ugoos-X3-(OverClock)           meson-sm1-ugoos-x3-oc.dtb                         
509   s905x3     TX3-1Gb                        meson-sm1-tx3-qz.dtb                              
510   s905x3     TX3-1Gb-(OverClock)            meson-sm1-tx3-qz-oc.dtb                           
511   s905x3     TX3-100Mb                      meson-sm1-tx3-bz.dtb                              
512   s905x3     TX3-100Mb-(OverClock)          meson-sm1-tx3-bz-oc.dtb                           
513   s905x3     X96-Air-1Gb                    meson-sm1-x96-air-gbit.dtb                        
514   s905x3     X96-Air-100Mb                  meson-sm1-x96-air.dtb                             
515   s905x3     A95XF3-Air-1Gb                 meson-sm1-a95xf3-air-gbit.dtb                     
516   s905x3     A95XF3-Air-100Mb               meson-sm1-a95xf3-air.dtb                          
0     Other      Unknown                        Import-custom-dtb-file                            
--------------------------------------------------------------------------------------
Please Input ID: 201
Input Box ID: [ 201 ]
FDTFILE: [ meson-gxm-octopus-planet.dtb ]
UBOOT_OVERLOAD: [ u-boot-zyxq.bin ]
K510: [ 0 ]
--------------------------------------------
Please select the type of file system:
1. ext4
2. btrfs
--------------------------------------------
Please Input ID: 1
Input Type ID: [ 1 ]
The type of file system: [ ext4 ]
Start backup default bootloader
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 1.53155 s, 2.7 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00146288 s, 350 kB/s
Start create MBR and partittion
Start copy system for eMMC.
Formatting BOOTFS partition...
mkfs.fat 4.1 (2017-01-24)
Start copy BOOT_EMMC partition data...
Generate the new uEnv.txt file.
Formatting ROOTFS partition...
Start copy ROOTFS_EMMC partition data...
copy [ etc ] ...
copy [ home ] ...
copy [ lib64 ] ...
copy [ opt ] ...
copy [ root ] ...
copy [ selinux ] ...
copy [ srv ] ...
copy [ usr ] ...
copy [ var ] ...
Copy complete.
Generate the new fstab file.
Update the relevant parameters
*************************************************************************************************
Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
*************************************************************************************************
armbian:~:# sudo -i
armbian:~:# sudo -i
armbian:~:# su
armbian:~:# armbian-update 5.15.35
Ready to update, please wait...
Already the latest version, no need to update.
armbian:~:# armbian-update 5.15.35
Ready to update, please wait...
Already the latest version, no need to update.
armbian:~:# ls
armbian:~:# reboot
Connection closing...Socket close.
重新来过一遍还是不行，5.15.35可以U盘启动，写入EMMC后启不动，因为HDMI没有输出，哪些卡死也不清楚，我再试试5.10的吧

@lanyucomputer
Copy link
Author

重刷5.10.112版本的，用U盘启动的时候是比5.15内核 的相比HDMI显示有输出，但用armbian-install命令写入EMMC后重启，就和5.15版本的一样的了，没有显示输出，也启不动系统 ，也不能重新进U盘系统了，唉

@ophub
Copy link
Owner

ophub commented Apr 21, 2022

armbian-install no
加no不使用主线u-boot试试

@lanyucomputer
Copy link
Author

可以直接刷装原版的ARMBIAN吗？我也想试试，5.10内核的和5.3.0的区别是什么，5.3是不是太老了，我还有一个玩客云都是5.9的内核的，如果最后实在刷不了的话，我就用5.3了，而且5.3可以显示输出，还可以按复位键启动U盘系统

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited by ophub 

Connecting to 10.0.0.203:22...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.

WARNING! The remote SSH server rejected X11 forwarding request.
    _              _        ___  _ ____  
   / \   _ __ ___ | |  ___ / _ \/ |___ \ 
  / _ \ | '_ ` _ \| | / __| (_) | | __) |
 / ___ \| | | | | | | \__ \\__, | |/ __/ 
/_/   \_\_| |_| |_|_| |___/  /_/|_|_____|
                                         
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.10.112-meson64-dev

No end-user support: built from trunk

System load:   11%           	Up time:       4 min	
Memory usage:  10% of 1.89G  	IP:	       10.0.0.203
10.0.0.202
CPU temp:      48°C           	Usage of /:    49% of 2.6G   	
storage/:      40% of 255M   	

[ 7 security updates available, 14 updates total: apt upgrade ]
Last check: 2022-04-21 23:22

[ General system configuration (beta): armbian-config ]

Last login: Thu Apr 21 23:23:21 2022 from 10.0.0.104
[oh-my-zsh] Insecure completion-dependent directories detected:
drwxr-xr-x  12 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh
drwxr-xr-x 317 1023 1023  12288 Apr 21 00:24 /etc/oh-my-zsh/plugins
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/colorize
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/debian
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/docker
-rw-r--r--   1 1023 1023 130563 Apr 21 00:24 /etc/oh-my-zsh/plugins/docker/_docker
drwxr-xr-x   3 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/evalcache
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/extract
-rw-r--r--   1 1023 1023    356 Apr 21 00:24 /etc/oh-my-zsh/plugins/extract/_extract
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/git
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/git-extras
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/history
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/screen
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/tmux
drwxr-xr-x   2 1023 1023   4096 Apr 21 00:24 /etc/oh-my-zsh/plugins/web-search
drwxr-xr-x   3 1023 1023   4096 Apr 22 09:47 /root/.oh-my-zsh/cache

[oh-my-zsh] For safety, we will not load completions from these directories until
[oh-my-zsh] you fix their permissions and ownership and restart zsh.
[oh-my-zsh] See the above list for directories with group or other writability.

[oh-my-zsh] To fix your permissions you can do so by disabling
[oh-my-zsh] the write permission of "group" and "others" and making sure that the
[oh-my-zsh] owner of these directories is either root or your current user.
[oh-my-zsh] The following command may help:
[oh-my-zsh]     compaudit | xargs chmod g-w,o-w

[oh-my-zsh] If the above didn't help or you want to skip the verification of
[oh-my-zsh] insecure directories you can set the variable ZSH_DISABLE_COMPFIX to
[oh-my-zsh] "true" before oh-my-zsh is sourced in your zshrc file.

armbian:~:# armbian-install no
Start install armbian to emmc...
DEV_EMMC: /dev/mmcblk2
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                                               
--------------------------------------------------------------------------------------
101   s905d      Phicomm-N1                     meson-gxl-s905d-phicomm-n1.dtb                    
102   s905d      Phicomm-N1-(DMA-thresh)        meson-gxl-s905d-phicomm-n1-thresh.dtb             
103   s905x      hg680p-&-b860h                 meson-gxl-s905x-p212.dtb                          
104   s905w      X96-Mini-&-TX3-Mini            meson-gxl-s905w-tx3-mini.dtb                      
105   s905d      MECOOL-KI-Pro                  meson-gxl-s905d-mecool-ki-pro.dtb                 
201   s912       Octopus-Planet                 meson-gxm-octopus-planet.dtb                      
202   s912       H96-Pro-Plus                   meson-gxm-octopus-planet.dtb                      
203   s912       Tanix-TX92                     meson-gxm-octopus-planet.dtb                      
204   s912       VORKE-Z6-Plus                  meson-gxm-octopus-planet.dtb                      
205   s912       MECOOL-M8S-Pro-L               meson-gxm-q201.dtb                                
301   s905x2     X96-Max-4GB                    meson-g12a-x96-max.dtb                            
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb                       
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb                             
401   s922x      Beelink-GT-King                meson-g12b-gtking.dtb                             
402   s922x      Beelink-GT-King-Pro            meson-g12b-gtking-pro.dtb                         
403   s922x      Beelink-GT-King-Pro-H          meson-g12b-gtking-pro-h.dtb                       
404   s922x      Beelink-GT-King-Pro-Rev_A      meson-g12b-gtking-pro.dtb                         
405   s922x      Hardkernel-ODroid-N2           meson-g12b-odroid-n2.dtb                          
406   s922x      UGOOS-AM6-Plus                 meson-g12b-ugoos-am6.dtb                          
407   a311d      Khadas-VIM3                    meson-g12b-a311d-khadas-vim3.dtb                  
501   s905x3     X96-Max+                       meson-sm1-x96-max-plus.dtb                        
502   s905x3     X96-Max+-(OverClock)           meson-sm1-x96-max-plus-oc.dtb                     
503   s905x3     HK1-Box                        meson-sm1-hk1box-vontar-x3.dtb                    
504   s905x3     HK1-Box-(OverClock)            meson-sm1-hk1box-vontar-x3-oc.dtb                 
505   s905x3     H96-Max-X3                     meson-sm1-h96-max-x3.dtb                          
506   s905x3     H96-Max-X3-(OverClock)         meson-sm1-h96-max-x3-oc.dtb                       
507   s905x3     Ugoos-X3                       meson-sm1-ugoos-x3.dtb                            
508   s905x3     Ugoos-X3-(OverClock)           meson-sm1-ugoos-x3-oc.dtb                         
509   s905x3     TX3-1Gb                        meson-sm1-tx3-qz.dtb                              
510   s905x3     TX3-1Gb-(OverClock)            meson-sm1-tx3-qz-oc.dtb                           
511   s905x3     TX3-100Mb                      meson-sm1-tx3-bz.dtb                              
512   s905x3     TX3-100Mb-(OverClock)          meson-sm1-tx3-bz-oc.dtb                           
513   s905x3     X96-Air-1Gb                    meson-sm1-x96-air-gbit.dtb                        
514   s905x3     X96-Air-100Mb                  meson-sm1-x96-air.dtb                             
515   s905x3     A95XF3-Air-1Gb                 meson-sm1-a95xf3-air-gbit.dtb                     
516   s905x3     A95XF3-Air-100Mb               meson-sm1-a95xf3-air.dtb                          
0     Other      Unknown                        Import-custom-dtb-file                            
--------------------------------------------------------------------------------------
Please Input ID: 201
Input Box ID: [ 201 ]
FDTFILE: [ meson-gxm-octopus-planet.dtb ]
UBOOT_OVERLOAD: [ u-boot-zyxq.bin ]
K510: [ 1 ]
--------------------------------------------
Please select the type of file system:
1. ext4
2. btrfs
--------------------------------------------
Please Input ID: 1
Input Type ID: [ 1 ]
The type of file system: [ ext4 ]
1+0 records in
1+0 records out
512 bytes copied, 0.00183778 s, 279 kB/s
Start create MBR and partittion
Start copy system for eMMC.
Formatting BOOTFS partition...
mkfs.fat 4.1 (2017-01-24)
Start copy BOOT_EMMC partition data...
Generate the new uEnv.txt file.
Copy [ u-boot-zyxq.bin ] to u-boot.emmc
Formatting ROOTFS partition...
Start copy ROOTFS_EMMC partition data...
copy [ etc ] ...
copy [ home ] ...
copy [ lib64 ] ...
copy [ opt ] ...
copy [ root ] ...
copy [ selinux ] ...
copy [ srv ] ...
copy [ usr ] ...
copy [ var ] ...
Copy complete.
Generate the new fstab file.
Update the relevant parameters
*************************************************************************************************
Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
*************************************************************************************************
armbian:~:# reboot
Connection closing...Socket close.

Connection closed by foreign host.

Disconnected from remote host(10.0.0.203) at 09:51:00.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 
用你教的方法后面 armbian-install no
后还是一样的结果，启动不了，黑屏，也不能从U盘启动，又只能重刷H96从重来过了

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

https://github.com/ophub/kernel/releases/download/tools/android_tv_zyxq_octopus_planet_s912_1gb.tar.xz
你要不试试刷成这个章鱼的TV系统，不要刷H96的，先换成这个系统再刷armbian

链接：https://pan.baidu.com/s/1kbvtyxpcmniLKN_ziH-kqQ 提取码：jla9
f大的网盘里有他编译的armbian，如果你用上面的安卓系统还是不行，你下载他的固件试试

@lanyucomputer
Copy link
Author

好的，我来试试，生命不息，折腾不止，哈哈

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

https://www.right.com.cn/FORUM/thread-7806483-1-1.html
你看看这个帖子，我看见有人说自己成功了。你有这个BootLoader没，好像必须换一下这个。
这个设备有不同板子？黑板是一种不常见的？你是什么的。

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

bootloader.zip
dd if=./bootloader of=/dev/mmcblk0 bs=1M
刷入安卓系统后，先下载上面的bootloader并dd替换了。
然后重启测试下安卓是否正常启动。写入后如无法启动可断电，按住reset后再通电，按住5秒以上。

如果上述正常，再直接刷入armbian-install no试试

@lanyucomputer
Copy link
Author

我是黑版，没有替换bootloader,替换是在刷安卓系统后替换是吧，怎么替换，怎么进入的？dd if=./bootloader of=/dev/mmcblk0 bs=1M这条命令是在哪里输入的？

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

https://bbs.nas66.com/forum.php?mod=viewthread&tid=3184&extra=&page=1&mobile=no&_dsign=2ecbb2be

我看了一些刷章鱼星球的帖子，我理解是这样刷：
1.先换安卓TV系统：线刷H96PRO
2.更换bootloader并安装armbian：
u盘写入armbian系统，从u盘启动进入armbian，
2.1 先换bootloader：bootloader.zip 先下载并把bootloader上传到/root目录下，更换命令：dd if=/root/bootloader of=/dev/mmcblk0 bs=1M
2.2 写入armbian：armbian-install

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited by ophub 

Connecting to 10.0.0.132:22...
Connection established.
To escape to local shell, press 'Ctrl+Alt+]'.

WARNING! The remote SSH server rejected X11 forwarding request.
##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): 9.0.3 (Amlogic.arm)
CoreELEC:~ # ls
backup       lost+found   pictures     tvshows
downloads    music        screenshots  videos
CoreELEC:~ # cd sownloads
-sh: cd: can't cd to sownloads: No such file or directory
CoreELEC:~ # cd downloads
CoreELEC:~/downloads # ls
bootloadernew
CoreELEC:~/downloads # dd if=./bootloadernew of=/dev/mmcblk0 bs=1M
4+0 records in
4+0 records out
4194304 bytes (4.0MB) copied, 0.100014 seconds, 40.0MB/s
CoreELEC:~/downloads # Connection closing...Socket close.

Connection closed by foreign host.

Disconnected from remote host(10.0.0.132) at 11:03:58.
先刷 CoreELEC系统后，用SSH登陆，用SMB复制bootloader 到CoreELEC系统，然后用命令dd if=./bootloader of=/dev/mmcblk0 bs=1M
，这样就改了BOOTLOADER

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

对，这样也可以刷入新bootloader
我看了章鱼的armbian没有主线u-boot，所以直接armbian-install即可安装armbian
如果你加了这个bootloader可以启动，我把他添加到固件里，以后就不用手动刷了

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited by ophub 

WARNING! The remote SSH server rejected X11 forwarding request.
    _              _        ___  _ ____  
   / \   _ __ ___ | |  ___ / _ \/ |___ \ 
  / _ \ | '_ ` _ \| | / __| (_) | | __) |
 / ___ \| | | | | | | \__ \\__, | |/ __/ 
/_/   \_\_| |_| |_|_| |___/  /_/|_|_____|
                                         
Welcome to Armbian 22.05.0-trunk Focal with Linux 5.10.112-meson64-dev

No end-user support: built from trunk

System load:   10%           	Up time:       3 min	
Memory usage:  11% of 1.89G  	IP:	       10.0.0.203
CPU temp:      52°C           	Usage of /:    49% of 2.6G   	
storage/:      40% of 255M   	

[ 7 security updates available, 14 updates total: apt upgrade ]
Last check: 2022-04-22 12:14

Last login: Fri Apr 22 12:15:10 2022 from 10.0.0.104
armbian:~:# ls
bootloadernew
armbian:~:# armbian-install
Start install armbian to emmc...
DEV_EMMC: /dev/mmcblk2
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                                               
--------------------------------------------------------------------------------------
101   s905d      Phicomm-N1                     meson-gxl-s905d-phicomm-n1.dtb                    
102   s905d      Phicomm-N1-(DMA-thresh)        meson-gxl-s905d-phicomm-n1-thresh.dtb             
103   s905x      hg680p-&-b860h                 meson-gxl-s905x-p212.dtb                          
104   s905w      X96-Mini-&-TX3-Mini            meson-gxl-s905w-tx3-mini.dtb                      
105   s905d      MECOOL-KI-Pro                  meson-gxl-s905d-mecool-ki-pro.dtb                 
201   s912       Octopus-Planet                 meson-gxm-octopus-planet.dtb                      
202   s912       H96-Pro-Plus                   meson-gxm-octopus-planet.dtb                      
203   s912       Tanix-TX92                     meson-gxm-octopus-planet.dtb                      
204   s912       VORKE-Z6-Plus                  meson-gxm-octopus-planet.dtb                      
205   s912       MECOOL-M8S-Pro-L               meson-gxm-q201.dtb                                
301   s905x2     X96-Max-4GB                    meson-g12a-x96-max.dtb                            
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb                       
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb                             
401   s922x      Beelink-GT-King                meson-g12b-gtking.dtb                             
402   s922x      Beelink-GT-King-Pro            meson-g12b-gtking-pro.dtb                         
403   s922x      Beelink-GT-King-Pro-H          meson-g12b-gtking-pro-h.dtb                       
404   s922x      Beelink-GT-King-Pro-Rev_A      meson-g12b-gtking-pro.dtb                         
405   s922x      Hardkernel-ODroid-N2           meson-g12b-odroid-n2.dtb                          
406   s922x      UGOOS-AM6-Plus                 meson-g12b-ugoos-am6.dtb                          
407   a311d      Khadas-VIM3                    meson-g12b-a311d-khadas-vim3.dtb                  
501   s905x3     X96-Max+                       meson-sm1-x96-max-plus.dtb                        
502   s905x3     X96-Max+-(OverClock)           meson-sm1-x96-max-plus-oc.dtb                     
503   s905x3     HK1-Box                        meson-sm1-hk1box-vontar-x3.dtb                    
504   s905x3     HK1-Box-(OverClock)            meson-sm1-hk1box-vontar-x3-oc.dtb                 
505   s905x3     H96-Max-X3                     meson-sm1-h96-max-x3.dtb                          
506   s905x3     H96-Max-X3-(OverClock)         meson-sm1-h96-max-x3-oc.dtb                       
507   s905x3     Ugoos-X3                       meson-sm1-ugoos-x3.dtb                            
508   s905x3     Ugoos-X3-(OverClock)           meson-sm1-ugoos-x3-oc.dtb                         
509   s905x3     TX3-1Gb                        meson-sm1-tx3-qz.dtb                              
510   s905x3     TX3-1Gb-(OverClock)            meson-sm1-tx3-qz-oc.dtb                           
511   s905x3     TX3-100Mb                      meson-sm1-tx3-bz.dtb                              
512   s905x3     TX3-100Mb-(OverClock)          meson-sm1-tx3-bz-oc.dtb                           
513   s905x3     X96-Air-1Gb                    meson-sm1-x96-air-gbit.dtb                        
514   s905x3     X96-Air-100Mb                  meson-sm1-x96-air.dtb                             
515   s905x3     A95XF3-Air-1Gb                 meson-sm1-a95xf3-air-gbit.dtb                     
516   s905x3     A95XF3-Air-100Mb               meson-sm1-a95xf3-air.dtb                          
0     Other      Unknown                        Import-custom-dtb-file                            
--------------------------------------------------------------------------------------
Please Input ID: 0     
Please Input SoC Name: dtb.img
Please Input DTB Name: dtb.img
Please Input UBOOT_OVERLOAD Name: dtb.img
Please Input MAINLINE_UBOOT Name: ^C
armbian:~:# armbian-install
Start install armbian to emmc...
DEV_EMMC: /dev/mmcblk2
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                                               
--------------------------------------------------------------------------------------
101   s905d      Phicomm-N1                     meson-gxl-s905d-phicomm-n1.dtb                    
102   s905d      Phicomm-N1-(DMA-thresh)        meson-gxl-s905d-phicomm-n1-thresh.dtb             
103   s905x      hg680p-&-b860h                 meson-gxl-s905x-p212.dtb                          
104   s905w      X96-Mini-&-TX3-Mini            meson-gxl-s905w-tx3-mini.dtb                      
105   s905d      MECOOL-KI-Pro                  meson-gxl-s905d-mecool-ki-pro.dtb                 
201   s912       Octopus-Planet                 meson-gxm-octopus-planet.dtb                      
202   s912       H96-Pro-Plus                   meson-gxm-octopus-planet.dtb                      
203   s912       Tanix-TX92                     meson-gxm-octopus-planet.dtb                      
204   s912       VORKE-Z6-Plus                  meson-gxm-octopus-planet.dtb                      
205   s912       MECOOL-M8S-Pro-L               meson-gxm-q201.dtb                                
301   s905x2     X96-Max-4GB                    meson-g12a-x96-max.dtb                            
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb                       
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb                             
401   s922x      Beelink-GT-King                meson-g12b-gtking.dtb                             
402   s922x      Beelink-GT-King-Pro            meson-g12b-gtking-pro.dtb                         
403   s922x      Beelink-GT-King-Pro-H          meson-g12b-gtking-pro-h.dtb                       
404   s922x      Beelink-GT-King-Pro-Rev_A      meson-g12b-gtking-pro.dtb                         
405   s922x      Hardkernel-ODroid-N2           meson-g12b-odroid-n2.dtb                          
406   s922x      UGOOS-AM6-Plus                 meson-g12b-ugoos-am6.dtb                          
407   a311d      Khadas-VIM3                    meson-g12b-a311d-khadas-vim3.dtb                  
501   s905x3     X96-Max+                       meson-sm1-x96-max-plus.dtb                        
502   s905x3     X96-Max+-(OverClock)           meson-sm1-x96-max-plus-oc.dtb                     
503   s905x3     HK1-Box                        meson-sm1-hk1box-vontar-x3.dtb                    
504   s905x3     HK1-Box-(OverClock)            meson-sm1-hk1box-vontar-x3-oc.dtb                 
505   s905x3     H96-Max-X3                     meson-sm1-h96-max-x3.dtb                          
506   s905x3     H96-Max-X3-(OverClock)         meson-sm1-h96-max-x3-oc.dtb                       
507   s905x3     Ugoos-X3                       meson-sm1-ugoos-x3.dtb                            
508   s905x3     Ugoos-X3-(OverClock)           meson-sm1-ugoos-x3-oc.dtb                         
509   s905x3     TX3-1Gb                        meson-sm1-tx3-qz.dtb                              
510   s905x3     TX3-1Gb-(OverClock)            meson-sm1-tx3-qz-oc.dtb                           
511   s905x3     TX3-100Mb                      meson-sm1-tx3-bz.dtb                              
512   s905x3     TX3-100Mb-(OverClock)          meson-sm1-tx3-bz-oc.dtb                           
513   s905x3     X96-Air-1Gb                    meson-sm1-x96-air-gbit.dtb                        
514   s905x3     X96-Air-100Mb                  meson-sm1-x96-air.dtb                             
515   s905x3     A95XF3-Air-1Gb                 meson-sm1-a95xf3-air-gbit.dtb                     
516   s905x3     A95XF3-Air-100Mb               meson-sm1-a95xf3-air.dtb                          
0     Other      Unknown                        Import-custom-dtb-file                            
--------------------------------------------------------------------------------------
Please Input ID: 201
Input Box ID: [ 201 ]
FDTFILE: [ meson-gxm-octopus-planet.dtb ]
UBOOT_OVERLOAD: [ u-boot-zyxq.bin ]
K510: [ 1 ]
--------------------------------------------
Please select the type of file system:
1. ext4
2. btrfs
--------------------------------------------
Please Input ID: 1
Input Type ID: [ 1 ]
The type of file system: [ ext4 ]
Start backup default bootloader
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.934647 s, 4.5 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00153355 s, 334 kB/s
Start create MBR and partittion
Start copy system for eMMC.
Formatting BOOTFS partition...
mkfs.fat 4.1 (2017-01-24)
Start copy BOOT_EMMC partition data...
Generate the new uEnv.txt file.
Copy [ u-boot-zyxq.bin ] to u-boot.emmc
Formatting ROOTFS partition...
Start copy ROOTFS_EMMC partition data...
copy [ etc ] ...
copy [ home ] ...
copy [ lib64 ] ...
copy [ opt ] ...
copy [ root ] ...
copy [ selinux ] ...
copy [ srv ] ...
copy [ usr ] ...
copy [ var ] ...
Copy complete.
Generate the new fstab file.
Update the relevant parameters
*************************************************************************************************
Successful installed, please unplug the USB, re-insert the power supply to start the armbian.
*************************************************************************************************
armbian:~:# ls
bootloadernew  dtb.img
armbian:~:# dd if=./bootloadernew of=/dev/mmcblk0 bs=1M
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.0839783 s, 49.9 MB/s
armbian:~:# reboot
Connection closing...Socket close.

Connection closed by foreign host.

Disconnected from remote host(10.0.0.203) at 12:22:28.

Type `help' to learn how to use Xshell prompt.
[C:\~]$ 
我把每个步骤都做了，但还是不行，你的这个包就是启动不了，直接是黑屏的，会不会是DTB的问题，我看到你的让选择201的那个DTB导致的，我也写了BOOTLOADER了，甚至armbian-install完成之后又重启用这个命令写入一遍bootloader，依然是黑屏

@lanyucomputer
Copy link
Author

顺便说一下，如果不用H96的包，用这个包的话android_tv_zyxq_octopus_planet_s912_1gb，最后写入arm5.10到EMMC的时候报错，
Socket error Event: 32 Error: 10053.
Connection closing...Socket close.

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

我一会把原来的删了，换成你的这个安卓。

你使用5.15.35的固件，这个和5.4/5.3的固件一样，不用u-boot支持。你再试试。
还是1.刷H96PRO安卓，2.刷bootloader（两条dd命令），3.刷armbian

另外还原bootloader需要2条命令，我看你只输入了一条，你仔细看是不是少输入了。

dd if=/root/bootloader of="/dev/mmcblk0" conv=fsync bs=1 count=442
dd if=/root/bootloader of="/dev/mmcblk0" conv=fsync bs=512 skip=1 seek=1

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

https://www.right.com.cn/FORUM/thread-7806483-1-1.html
根据这个帖子说刷入5.3内核的armbian可以使用，我把这个固件下载看了，他使用的是meson-gxm-q200.dtb这个dtb。
你先按上面说的，试试5.15固件，两次dd还原bootloader，如果还是不启动，你试试改/boot/uEnv.txt里的dtb的值再刷一下。

以下是从Armbian_5.96_Aml-g12_Debian_buster_default_5.3.0-rc8_20190910.img这个固件里看的他的dtb配置及安装文件，从这2个文件看，没u-boot，区别只是dtb不同。

我觉的可以从两个方面解决：

  1. 是 bootloader 命令dd少了一条
  2. 把/boot/uEnv.txt换成/boot/extlinux/extlinux.conf（T95也是写入emmc只能用extlinux.conf启动）
  3. 换公版dtb文件：meson-gxm-q200.dtb

cat extlinux.conf

Snip20220422_2

ls /boot
Snip20220422_3

cat /root/install.sh


#!/bin/sh

echo "Start script create MBR and filesystem"

hasdrives=$(lsblk | grep -oE '(mmcblk[0-9])' | sort | uniq)
if [ "$hasdrives" = "" ]
then
	echo "UNABLE TO FIND ANY EMMC OR SD DRIVES ON THIS SYSTEM!!! "
	exit 1
fi
avail=$(lsblk | grep -oE '(mmcblk[0-9]|sda[0-9])' | sort | uniq)
if [ "$avail" = "" ]
then
	echo "UNABLE TO FIND ANY DRIVES ON THIS SYSTEM!!!"
	exit 1
fi
runfrom=$(lsblk | grep /$ | grep -oE '(mmcblk[0-9]|sda[0-9])')
if [ "$runfrom" = "" ]
then
	echo " UNABLE TO FIND ROOT OF THE RUNNING SYSTEM!!! "
	exit 1
fi
emmc=$(echo $avail | sed "s/$runfrom//" | sed "s/sd[a-z][0-9]//g" | sed "s/ //g")
if [ "$emmc" = "" ]
then
	echo " UNABLE TO FIND YOUR EMMC DRIVE OR YOU ALREADY RUN FROM EMMC!!!"
	exit 1
fi
if [ "$runfrom" = "$avail" ]
then
	echo " YOU ARE RUNNING ALREADY FROM EMMC!!! "
	exit 1
fi
if [ $runfrom = $emmc ]
then
	echo " YOU ARE RUNNING ALREADY FROM EMMC!!! "
	exit 1
fi
if [ "$(echo $emmc | grep mmcblk)" = "" ]
then
	echo " YOU DO NOT APPEAR TO HAVE AN EMMC DRIVE!!! "
	exit 1
fi

DEV_EMMC="/dev/$emmc"

echo $DEV_EMMC

echo "Start backup u-boot default"

dd if="${DEV_EMMC}" of=/boot/u-boot-default.img bs=1M count=4

echo "Start create MBR and partittion"

parted -s "${DEV_EMMC}" mklabel msdos
parted -s "${DEV_EMMC}" mkpart primary fat32 700M 828M
parted -s "${DEV_EMMC}" mkpart primary ext4 829M 100%

echo "Start restore u-boot"

dd if=/boot/u-boot-default.img of="${DEV_EMMC}" conv=fsync bs=1 count=442
dd if=/boot/u-boot-default.img of="${DEV_EMMC}" conv=fsync bs=512 skip=1 seek=1

sync

echo "Done"

echo "Start copy system for eMMC."

mkdir -p /ddbr
chmod 777 /ddbr

PART_BOOT="${DEV_EMMC}p1"
PART_ROOT="${DEV_EMMC}p2"
DIR_INSTALL="/ddbr/install"

if [ -d $DIR_INSTALL ] ; then
    rm -rf $DIR_INSTALL
fi
mkdir -p $DIR_INSTALL

if grep -q $PART_BOOT /proc/mounts ; then
    echo "Unmounting BOOT partiton."
    umount -f $PART_BOOT
fi
echo -n "Formatting BOOT partition..."
mkfs.vfat -n "BOOT_EMMC" $PART_BOOT
echo "done."

mount -o rw $PART_BOOT $DIR_INSTALL

echo -n "Cppying BOOT..."
cp -r /boot/* $DIR_INSTALL && sync
echo "done."

echo -n "Edit init config..."
sed -e "s/ROOTFS/ROOT_EMMC/g" \
 -i "$DIR_INSTALL/uEnv.ini"
echo "done."

rm $DIR_INSTALL/s9*
rm $DIR_INSTALL/aml*

umount $DIR_INSTALL

if grep -q $PART_ROOT /proc/mounts ; then
    echo "Unmounting ROOT partiton."
    umount -f $PART_ROOT
fi

echo "Formatting ROOT partition..."
mke2fs -F -q -t ext4 -L ROOT_EMMC -m 0 $PART_ROOT
e2fsck -n $PART_ROOT
echo "done."

echo "Copying ROOTFS."

mount -o rw $PART_ROOT $DIR_INSTALL

cd /
echo "Copy BIN"
tar -cf - bin | (cd $DIR_INSTALL; tar -xpf -)
#echo "Copy BOOT"
#mkdir -p $DIR_INSTALL/boot
#tar -cf - boot | (cd $DIR_INSTALL; tar -xpf -)
echo "Create DEV"
mkdir -p $DIR_INSTALL/dev
#tar -cf - dev | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy ETC"
tar -cf - etc | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy HOME"
tar -cf - home | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy LIB"
tar -cf - lib | (cd $DIR_INSTALL; tar -xpf -)
echo "Create MEDIA"
mkdir -p $DIR_INSTALL/media
#tar -cf - media | (cd $DIR_INSTALL; tar -xpf -)
echo "Create MNT"
mkdir -p $DIR_INSTALL/mnt
#tar -cf - mnt | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy OPT"
tar -cf - opt | (cd $DIR_INSTALL; tar -xpf -)
echo "Create PROC"
mkdir -p $DIR_INSTALL/proc
echo "Copy ROOT"
tar -cf - root | (cd $DIR_INSTALL; tar -xpf -)
echo "Create RUN"
mkdir -p $DIR_INSTALL/run
echo "Copy SBIN"
tar -cf - sbin | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy SELINUX"
tar -cf - selinux | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy SRV"
tar -cf - srv | (cd $DIR_INSTALL; tar -xpf -)
echo "Create SYS"
mkdir -p $DIR_INSTALL/sys
echo "Create TMP"
mkdir -p $DIR_INSTALL/tmp
echo "Copy USR"
tar -cf - usr | (cd $DIR_INSTALL; tar -xpf -)
echo "Copy VAR"
tar -cf - var | (cd $DIR_INSTALL; tar -xpf -)
sync

echo "Copy fstab"

rm $DIR_INSTALL/etc/fstab
cp -a /root/fstab $DIR_INSTALL/etc/fstab

rm $DIR_INSTALL/root/install.sh
rm $DIR_INSTALL/root/fstab
rm $DIR_INSTALL/usr/bin/ddbr


cd /
sync

umount $DIR_INSTALL

echo "*******************************************"
echo "Complete copy OS to eMMC "
echo "*******************************************"

@lanyucomputer
Copy link
Author

我一会把原来的删了，换成你的这个安卓。

你使用5.15.35的固件，这个和5.4/5.3的固件一样，不用u-boot支持。你再试试。
还是1.刷H96PRO安卓，2.刷bootloader（两条dd命令），3.刷armbian

另外还原bootloader需要2条命令，我看你只输入了一条，你仔细看是不是少输入了。

dd if=/root/bootloader of="/dev/mmcblk0" conv=fsync bs=1 count=442
dd if=/root/bootloader of="/dev/mmcblk0" conv=fsync bs=512 skip=1 seek=1

我不是输的这个命令，我输入的是dd if=./bootloadernew of=/dev/mmcblk0 bs=1M，没有这么长
#bootloadernew 这个是我上传上去的名字

@lanyucomputer
Copy link
Author

docker镜像是一定要找章鱼星球的，还是说所有的ARM64的都可以用呢？

@ophub
Copy link
Owner

ophub commented Apr 22, 2022

5.15内核5.15.32之前，刷了桌面，进去鼠标指针不移动。5.15.33的时候kernel.org有了显卡补丁，经测试鼠标可以用了。你的hdmi应该也是显示驱动未载入成功。

你usb进5.15固件（不用刷入emmc），发一下启动日志我看一下：dmesg

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

docker里面装op就只是rootfs，所以aarch64通用。刷f大docker版op试试：unifreq/openwrt-aarch64:latest

@lanyucomputer
Copy link
Author

我不是刷 的desktop版的，就是普通的服务器版，没有桌面界面的,我的意思是，开始引导的时候就没有显示就像电脑开机的BIOS引导一样，5.10有引导界面，而5.15的啥也没有黑屏的，但可以看到U盘在读，读完了也可以一样的进SSH

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

发dmesg

dmesg > /root/dmesg-zyxq-5.15.35

下载，发上来

@lanyucomputer
Copy link
Author

发dmesg

dmesg > /root/dmesg-zyxq-5.15.35

下载，发上来

稍等，只有一个U盘，我都是刷了5.10要换，又要重新刷，这两天U盘苦了

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

不用写入emmc了，在usb启动发日志就可以。你在usb里测试下5.17的内核吧（emmc也一样），一键切换：armbian-update 5.17.4

@lanyucomputer
Copy link
Author

不用写入emmc了，在usb启动发日志就可以。你在usb里测试下5.17的内核吧（emmc也一样），一键切换：armbian-update 5.17.4

测试5.17.4干嘛，这个也是长lts版本吗？

@ophub
Copy link
Owner

ophub commented Apr 22, 2022

5.17里有最新的黑科技，新特性只在高内核里有，5.10还没添加

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited

https://github.com/lanyucomputer/openwrt2022/blob/main/dmesg-zyxq-5.15.35 我不会上传，我发到这里了，你看一下能不能下载，5.17里面有什么黑科技，我们用得到吗？我只想找一个LTS长期支持的内核，5.10和5.15我查都是，所以都可以，当然越新越好，5.17是不是也有可能是LTS版本，我打包了，上传可以了https://github.com/lanyucomputer/openwrt2022/blob/main/dmesg-zyxq-5.15.35.7z

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited

你先看一下，我去洗澡先，回复的话，我一直都在
armbian:~:# armbian-update 5.17.4
Ready to update, please wait...
Kernel version: 5.17.4
Start downloading kernel to [ /root ]...

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.35-flippy-72+o (root@univm25) (Ubuntu clang version 14.0.0-1ubuntu1, Ubuntu LLD 14.0.0) #107 SMP PREEMPT Wed Apr 20 19:16:15 CST 2022
[    0.000000] Machine model: Octopus Planet
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000063400000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000077ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   node   0: [mem 0x0000000001000000-0x0000000004ffffff]
[    0.000000]   node   0: [mem 0x0000000005000000-0x00000000072fffff]
[    0.000000]   node   0: [mem 0x0000000007300000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000010000000-0x00000000101fffff]
[    0.000000]   node   0: [mem 0x0000000010200000-0x0000000077ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000077ffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] percpu: Embedded 19 pages/cpu s37528 r8192 d32104 u77824
[    0.000000] pcpu-alloc: s37528 r8192 d32104 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 483840
[    0.000000] Kernel command line: root=UUID=cb6c23db-32f6-4d71-847d-781a8b67f74e rootflags=data=writeback rw rootfstype=ext4 console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=B0:D5:9D:F0:7C:00
[    0.000000] Unknown kernel command line parameters "cgroup_enable=memory cgroup_memory=1 mac=B0:D5:9D:F0:7C:00", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1581464K/1966080K available (14720K kernel code, 2650K rwdata, 5728K rodata, 2048K init, 884K bss, 122472K reserved, 262144K cma-reserved)
[    0.000000] random: get_random_u64 called from kmem_cache_open+0x28/0x53c with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000538] Console: colour dummy device 80x25
[    0.000956] printk: console [tty0] enabled
[    0.001024] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.001051] pid_max: default: 32768 minimum: 301
[    0.001179] LSM: Security Framework initializing
[    0.001240] SELinux:  Initializing.
[    0.001400] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.001427] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.003754] rcu: Hierarchical SRCU implementation.
[    0.004928] EFI services will not be available.
[    0.005491] smp: Bringing up secondary CPUs ...
[    0.006136] Detected VIPT I-cache on CPU1
[    0.006207] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.006960] Detected VIPT I-cache on CPU2
[    0.007018] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.007672] Detected VIPT I-cache on CPU3
[    0.007723] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.008410] Detected VIPT I-cache on CPU4
[    0.008482] CPU4: Booted secondary processor 0x0000000100 [0x410fd034]
[    0.009146] Detected VIPT I-cache on CPU5
[    0.009177] CPU5: Booted secondary processor 0x0000000101 [0x410fd034]
[    0.009807] Detected VIPT I-cache on CPU6
[    0.009838] CPU6: Booted secondary processor 0x0000000102 [0x410fd034]
[    0.010498] Detected VIPT I-cache on CPU7
[    0.010530] CPU7: Booted secondary processor 0x0000000103 [0x410fd034]
[    0.010627] smp: Brought up 1 node, 8 CPUs
[    0.010765] SMP: Total of 8 processors activated.
[    0.010777] CPU features: detected: 32-bit EL0 Support
[    0.010788] CPU features: detected: 32-bit EL1 Support
[    0.010802] CPU features: detected: CRC32 instructions
[    0.011922] CPU: All CPU(s) started at EL2
[    0.011974] alternatives: patching kernel code
[    0.014190] devtmpfs: initialized
[    0.021877] Registered cp15_barrier emulation handler
[    0.021916] Registered setend emulation handler
[    0.022069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.022101] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.032216] prandom: seed boundary self test passed
[    0.033491] prandom: 100 self tests passed
[    0.056434] prandom32: self test passed (less than 6 bits correlated)
[    0.056486] pinctrl core: initialized pinctrl subsystem
[    0.057094] DMI not present or invalid.
[    0.057397] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.059721] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.060208] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.060471] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.060569] audit: initializing netlink subsys (disabled)
[    0.060819] audit: type=2000 audit(0.059:1): state=initialized audit_enabled=0 res=1
[    0.061895] thermal_sys: Registered thermal governor 'step_wise'
[    0.062271] cpuidle: using governor ladder
[    0.062438] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.062654] ASID allocator initialised with 65536 entries
[    0.062828] Serial: AMBA PL011 UART driver
[    0.081073] platform c883a000.hdmi-tx: Fixing up cyclic dependency with d0100000.vpu
[    0.085412] platform cvbs-connector: Fixing up cyclic dependency with d0100000.vpu
[    0.085716] platform hdmi-connector: Fixing up cyclic dependency with c883a000.hdmi-tx
[    0.094228] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.094257] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.094273] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.094287] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.780782] cryptd: max_cpu_qlen set to 1000
[    1.784942] "cryptomgr_test" (118) uses obsolete ecb(arc4) skcipher
[    1.800054] alg: No test for 842 (842-generic)
[    1.800317] alg: No test for 842 (842-scomp)
[    1.908057] DRBG: Continuing without Jitter RNG
[    1.996433] raid6: neonx8   gen()  2224 MB/s
[    2.053192] raid6: neonx8   xor()  1602 MB/s
[    2.109966] raid6: neonx4   gen()  2203 MB/s
[    2.166714] raid6: neonx4   xor()  1540 MB/s
[    2.223498] raid6: neonx2   gen()  2043 MB/s
[    2.280249] raid6: neonx2   xor()  1436 MB/s
[    2.337017] raid6: neonx1   gen()  1670 MB/s
[    2.393792] raid6: neonx1   xor()  1174 MB/s
[    2.450537] raid6: int64x8  gen()  1504 MB/s
[    2.507287] raid6: int64x8  xor()   800 MB/s
[    2.564067] raid6: int64x4  gen()  1625 MB/s
[    2.620813] raid6: int64x4  xor()   821 MB/s
[    2.677596] raid6: int64x2  gen()  1384 MB/s
[    2.734344] raid6: int64x2  xor()   740 MB/s
[    2.791121] raid6: int64x1  gen()  1168 MB/s
[    2.847877] raid6: int64x1  xor()   583 MB/s
[    2.847889] raid6: using algorithm neonx8 gen() 2224 MB/s
[    2.847901] raid6: .... xor() 1602 MB/s, rmw enabled
[    2.847913] raid6: using neon recovery algorithm
[    2.848125] fbcon: Taking over console
[    2.850322] iommu: Default domain type: Translated 
[    2.850351] iommu: DMA domain TLB invalidation policy: strict mode 
[    2.850748] vgaarb: loaded
[    2.851303] SCSI subsystem initialized
[    2.851534] usbcore: registered new interface driver usbfs
[    2.851583] usbcore: registered new interface driver hub
[    2.851635] usbcore: registered new device driver usb
[    2.852132] mc: Linux media interface: v0.10
[    2.852174] videodev: Linux video capture interface: v2.00
[    2.852456] EDAC MC: Ver: 3.0.0
[    2.853491] Advanced Linux Sound Architecture Driver Initialized.
[    2.854818] clocksource: Switched to clocksource arch_sys_counter
[    2.855120] VFS: Disk quotas dquot_6.6.0
[    2.855199] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.855351] FS-Cache: Loaded
[    2.863291] NET: Registered PF_INET protocol family
[    2.863466] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    2.864705] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.864765] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.864978] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.865218] TCP: Hash tables configured (established 16384 bind 16384)
[    2.865493] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[    2.865587] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.865643] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.865861] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.865899] NET: Registered PF_XDP protocol family
[    2.865922] PCI: CLS 0 bytes, default 64
[    2.866223] Trying to unpack rootfs image as initramfs...
[    2.879238] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    2.879776] kvm [1]: IPA Size Limit: 40 bits
[    2.880884] kvm [1]: vgic interrupt IRQ9
[    2.881151] kvm [1]: Hyp mode initialized successfully
[    3.402764] Freeing initrd memory: 7296K
[    3.630061] Initialise system trusted keyrings
[    3.630316] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.637205] zbud: loaded
[    3.639190] fuse: init (API version 7.34)
[    3.639676] SGI XFS with ACLs, security attributes, quota, no debug enabled
[    3.679816] NET: Registered PF_ALG protocol family
[    3.740374] xor: measuring software checksum speed
[    3.745203]    8regs           :  2051 MB/sec
[    3.748604]    32regs          :  2908 MB/sec
[    3.753186]    arm64_neon      :  2155 MB/sec
[    3.753199] xor: using function: 32regs (2908 MB/sec)
[    3.753215] Key type asymmetric registered
[    3.753226] Asymmetric key parser 'x509' registered
[    3.753351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.753516] io scheduler mq-deadline registered
[    3.753531] io scheduler kyber registered
[    3.753699] io scheduler bfq registered
[    3.816081] soc soc0: Amlogic Meson GXM (S912) Revision 22:a (82:2) Detected
[    3.818489] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[    3.820435] Serial: AMBA driver
[    3.820833] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 22, base_baud = 1500000) is a meson_uart
[    4.858413] printk: console [ttyAML0] enabled
[    4.872426] brd: module loaded
[    4.876808] loop: module loaded
[    4.883610] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.884526] ehci-pci: EHCI PCI platform driver
[    4.888993] ehci-platform: EHCI generic platform driver
[    4.894718] usbcore: registered new interface driver cdc_wdm
[    4.899751] usbcore: registered new interface driver usb-storage
[    4.906182] mousedev: PS/2 mouse device common for all mice
[    4.911648] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[    4.920517] SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi
[    4.926291] meson-vrtc c81000a8.rtc: registered as rtc0
[    4.930700] meson-vrtc c81000a8.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
[    4.939259] i2c_dev: i2c /dev entries driver
[    4.945245] Registered IR keymap rc-cec
[    4.946812] rc rc0: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0
[    4.955079] input: meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc0/input1
[    4.967096] Synopsys Designware Multimedia Card Interface Driver
[    4.971085] meson-gx-mmc d0072000.mmc: Got CD GPIO
[    4.971146] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[    4.972253] meson-sm: secure-monitor enabled
[    4.973970] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[    4.974098] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[    4.980292] hid: raw HID events driver (C) Jiri Kosina
[    5.004943] usbcore: registered new interface driver usbhid
[    5.010204] usbhid: USB HID core driver
[    5.014403] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[    5.027719] Initializing XFRM netlink socket
[    5.028168] gpio irq setup: hwirq: 0x3A irqfirst: 0x34 irqlast: 0x3A pin[48]
[    5.028332] NET: Registered PF_INET6 protocol family
[    5.034113] genirq: Setting trigger mode 3 for irq 40 failed (meson_gpio_irq_set_type+0x0/0x140)
[    5.080814] Segment Routing with IPv6
[    5.080861] RPL Segment Routing with IPv6
[    5.082913] In-situ OAM (IOAM) with IPv6
[    5.086886] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    5.096206] bpfilter: Loaded bpfilter_umh pid 324
[    5.097381] NET: Registered PF_PACKET protocol family
[    5.102327] NET: Registered PF_KEY protocol family
[    5.107154] 8021q: 802.1Q VLAN Support v1.8
[    5.111609] registered taskstats version 1
[    5.115335] Loading compiled-in X.509 certificates
[    5.125360] zswap: loaded using pool zstd/zbud
[    5.126045] Key type ._fscrypt registered
[    5.128319] Key type .fscrypt registered
[    5.132250] Key type fscrypt-provisioning registered
[    5.138215] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    5.147590] mmc2: new HS200 MMC card at address 0001
[    5.149361] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB 
[    5.154737]  mmcblk2: p1 p2
[    5.156603] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB 
[    5.162192] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB 
[    5.166806] mmcblk2rpmb: mmc2:0001 8GTF4R 512 KiB, chardev (240:0)
[    5.174828] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[    5.204870] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[    5.209615] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[    5.217638] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[    5.225065] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[    5.295604] random: fast init done
[    5.342732] [drm] kms: can't enable cloning when we probably wanted to.
[    5.503921] Console: switching to colour frame buffer device 480x135
[    5.609691] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device
[    5.619395] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[    5.623331] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[    5.629641] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[    5.636457] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[    5.642482] meson8b-dwmac c9410000.ethernet: 	DWMAC1000
[    5.647644] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[    5.655060] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[    5.662477] meson8b-dwmac c9410000.ethernet: COE Type 2
[    5.667651] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[    5.674638] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[    5.681021] meson8b-dwmac c9410000.ethernet: Normal descriptors
[    5.686885] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[    5.692664] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    5.703395] dwc3-meson-g12a d0078080.usb: USB2 ports: 3
[    5.705791] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[    5.716317] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[    5.718209] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[    5.725370] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[    5.734258] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.737741] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
[    5.745271] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[    5.754479] xhci-hcd xhci-hcd.3.auto: irq 42, io mem 0xc9000000
[    5.760705] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    5.768516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.775638] usb usb1: Product: xHCI Host Controller
[    5.780467] usb usb1: Manufacturer: Linux 5.15.35-flippy-72+o xhci-hcd
[    5.786936] usb usb1: SerialNumber: xhci-hcd.3.auto
[    5.792314] hub 1-0:1.0: USB hub found
[    5.795510] hub 1-0:1.0: 3 ports detected
[    5.799880] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
[    5.805096] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
[    5.812482] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
[    5.819003] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.827178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    5.835151] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.842309] usb usb2: Product: xHCI Host Controller
[    5.847138] usb usb2: Manufacturer: Linux 5.15.35-flippy-72+o xhci-hcd
[    5.853607] usb usb2: SerialNumber: xhci-hcd.3.auto
[    5.858983] hub 2-0:1.0: USB hub found
[    5.862180] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.872071] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[    6.055098] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[    6.116382] ALSA device list:
[    6.116501]   No soundcards found.
[    6.118254] Freeing unused kernel memory: 2048K
[    6.121803] Run /init as init process
[    6.125304]   with arguments:
[    6.125311]     /init
[    6.125316]   with environment:
[    6.125319]     HOME=/
[    6.125323]     TERM=linux
[    6.125327]     cgroup_enable=memory
[    6.125332]     cgroup_memory=1
[    6.125335]     mac=B0:D5:9D:F0:7C:00
[    6.204258] usb 1-2: New USB device found, idVendor=048d, idProduct=1167, bcdDevice= 1.00
[    6.207607] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.214673] usb 1-2: Product: USB Mass Storage Device
[    6.219637] usb 1-2: Manufacturer: Yang Wei
[    6.223779] usb 1-2: SerialNumber: 0000000000000004
[    6.231580] usb-storage 1-2:1.0: USB Mass Storage device detected
[    6.236373] scsi host0: usb-storage 1-2:1.0
[    7.257720] scsi 0:0:0:0: Direct-Access     Yang Wei USB Flash Disk   0.00 PQ: 0 ANSI: 2
[    7.263118] sd 0:0:0:0: [sda] 31776768 512-byte logical blocks: (16.3 GB/15.2 GiB)
[    7.268492] sd 0:0:0:0: [sda] Write Protect is off
[    7.272774] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
[    7.273390] sd 0:0:0:0: [sda] Asking for cache data failed
[    7.278282] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    7.294395]  sda: sda1 sda2
[    7.315432] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.966458] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback. Quota mode: none.
[    8.898825] systemd[1]: System time before build time, advancing clock.
[    9.103069] systemd[1]: systemd 245.4-4ubuntu3.15 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    9.122985] systemd[1]: Detected architecture arm64.
[    9.174373] systemd[1]: Set hostname to <armbian>.
[   11.792699] random: crng init done
[   13.799054] systemd[1]: Created slice system-modprobe.slice.
[   13.802663] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   13.808703] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   13.816030] systemd[1]: Created slice User and Session Slice.
[   13.820248] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[   13.832472] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.840071] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.848458] systemd[1]: Reached target Local Encrypted Volumes.
[   13.854061] systemd[1]: Reached target Slices.
[   13.858261] systemd[1]: Reached target Swap.
[   13.862435] systemd[1]: Reached target System Time Set.
[   13.894590] systemd[1]: Listening on RPCbind Server Activation Socket.
[   13.897638] systemd[1]: Listening on Syslog Socket.
[   13.903499] systemd[1]: Listening on fsck to fsckd communication Socket.
[   13.918806] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   13.942162] systemd[1]: Listening on Journal Audit Socket.
[   13.964719] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.987874] systemd[1]: Listening on Journal Socket.
[   14.010821] systemd[1]: Listening on udev Control Socket.
[   14.033674] systemd[1]: Listening on udev Kernel Socket.
[   14.062384] systemd[1]: Mounting Huge Pages File System...
[   14.090143] systemd[1]: Mounting POSIX Message Queue File System...
[   14.117069] systemd[1]: Mounting NFSD configuration filesystem...
[   14.143880] systemd[1]: Mounting RPC Pipe File System...
[   14.171543] systemd[1]: Mounting Kernel Debug File System...
[   14.194344] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[   14.194785] RPC: Registered named UNIX socket transport module.
[   14.207843] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   14.218064] RPC: Registered udp transport module.
[   14.237833] systemd[1]: Starting Restore / save the current clock...
[   14.242500] RPC: Registered tcp transport module.
[   14.242506] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.305643] systemd[1]: Starting Set the console keyboard layout...
[   14.333136] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   14.348587] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   14.371335] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[   14.378421] systemd[1]: Started Nameserver information manager.
[   14.409784] systemd[1]: Reached target Network (Pre).
[   14.435458] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   14.456797] systemd[1]: Starting Load Kernel Modules...
[   14.484359] systemd[1]: Starting Remount Root and Kernel File Systems...
[   14.516496] systemd[1]: Starting udev Coldplug all Devices...
[   14.530594] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro. Quota mode: none.
[   14.560046] systemd[1]: Mounted Huge Pages File System.
[   14.583621] systemd[1]: Mounted POSIX Message Queue File System.
[   14.607569] systemd[1]: Mounted NFSD configuration filesystem.
[   14.632641] systemd[1]: Mounted RPC Pipe File System.
[   14.658357] systemd[1]: Mounted Kernel Debug File System.
[   14.686362] systemd[1]: Finished Restore / save the current clock.
[   14.714649] systemd[1]: Finished Set the console keyboard layout.
[   14.744991] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   14.780855] systemd[1]: Finished Load Kernel Modules.
[   14.811345] systemd[1]: Finished Remount Root and Kernel File Systems.
[   14.848621] systemd[1]: Mounting FUSE Control File System...
[   14.877319] systemd[1]: Mounting Kernel Configuration File System...
[   14.909313] systemd[1]: Starting pNFS block layout mapping daemon...
[   14.936027] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   14.950893] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   14.971009] systemd[1]: Starting Load/Save Random Seed...
[   14.999812] systemd[1]: Starting Apply Kernel Variables...
[   15.028702] systemd[1]: Starting Create System Users...
[   15.057452] systemd[1]: Mounted FUSE Control File System.
[   15.086019] systemd[1]: Finished udev Coldplug all Devices.
[   15.111684] systemd[1]: Mounted Kernel Configuration File System.
[   15.137295] systemd[1]: Started pNFS block layout mapping daemon.
[   15.164793] systemd[1]: Finished Load/Save Random Seed.
[   15.194163] systemd[1]: Finished Apply Kernel Variables.
[   15.236761] systemd[1]: Finished Create System Users.
[   15.271224] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[   15.301256] systemd[1]: Starting Create Static Device Nodes in /dev...
[   15.349479] systemd[1]: Finished Create Static Device Nodes in /dev.
[   15.374462] systemd[1]: Reached target Local File Systems (Pre).
[   15.403899] systemd[1]: Mounting /var/tmp...
[   15.436068] systemd[1]: Starting udev Kernel Device Manager...
[   15.464747] systemd[1]: Mounted /var/tmp.
[   15.549146] [drm] kms: can't enable cloning when we probably wanted to.
[   15.603658] systemd[1]: Started udev Kernel Device Manager.
[   15.844289] systemd[1]: Found device /dev/ttyAML0.
[   15.876422] Registered IR keymap rc-empty
[   15.878383] meson_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[   15.878605] rc rc1: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1
[   15.886221] rc rc1: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
[   15.917072] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc1/input2
[   15.971796] meson-ir c8100580.ir: receiver initialized
[   15.976004] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[   16.002350] debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
[   16.003139] panfrost d00c0000.gpu: clock rate = 24000000
[   16.044229] panfrost d00c0000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
[   16.070541] debugfs: File 'HDMITX Capture' in directory 'dapm' already present!
[   16.087828] panfrost d00c0000.gpu: mali-t820 id 0x820 major 0x1 minor 0x0 status 0x0
[   16.100321] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.103913] panfrost d00c0000.gpu: features: 00000000,101e76ff, issues: 00000000,24040400
[   16.136164] panfrost d00c0000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
[   16.170895] panfrost d00c0000.gpu: shader_present=0x7 l2_present=0x1
[   16.209323] [drm] Initialized panfrost 1.2.0 20180908 for d00c0000.gpu on minor 1
[   16.294722] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[   16.316960] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[   16.317600] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   16.317827] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   16.317952] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   16.387548] systemd[1]: Found device /sys/subsystem/net/devices/eth0.
[   16.700292] systemd[1]: Found device USB_Flash_Disk BOOT.
[   16.920229] systemd[1]: Starting File System Check on /dev/disk/by-label/BOOT...
[   16.960598] systemd[1]: Started File System Check Daemon to report status.
[   17.024210] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[   17.133570] systemd[1]: Finished File System Check on /dev/disk/by-label/BOOT.
[   17.175336] systemd[1]: Mounting /boot...
[   17.260468] systemd[1]: Mounted /boot.
[   17.286822] systemd[1]: Reached target Local File Systems.
[   17.317173] systemd[1]: Starting Armbian ZRAM config...
[   17.345342] systemd[1]: Starting Set console font and keymap...
[   17.373780] systemd[1]: Started ifup for eth0.
[   17.404131] systemd[1]: Starting Raise network interfaces...
[   17.436345] systemd[1]: Starting Preprocess NFS configuration...
[   17.467279] systemd[1]: Starting Mark the need to relabel after reboot...
[   17.498422] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[   17.515285] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[   17.532688] systemd[1]: nfs-config.service: Succeeded.
[   17.546825] systemd[1]: Finished Preprocess NFS configuration.
[   17.577495] systemd[1]: Finished Mark the need to relabel after reboot.
[   17.608787] systemd[1]: Starting NFSv4 ID-name mapping service...
[   17.623684] zram: Added device: zram0
[   17.625131] zram: Added device: zram1
[   17.626585] zram: Added device: zram2
[   17.670590] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[   17.686859] systemd[1]: Reached target NFS client services.
[   17.710145] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[   17.765228] systemd[1]: Started NFSv4 ID-name mapping service.
[   17.895943] zram0: detected capacity change from 0 to 1852952
[   17.974159] Adding 926472k swap on /dev/zram0.  Priority:5 extents:1 across:926472k SSFS
[   18.160247] zram1: detected capacity change from 0 to 102400
[   18.201555] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet] (irq=44)
[   18.232033] meson8b-dwmac c9410000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   18.254855] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[   18.268246] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[   18.281437] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[   18.286083] zram2: detected capacity change from 0 to 1852952
[   18.409524] EXT4-fs (zram2): mounted filesystem without journal. Opts: discard. Quota mode: none.
[   18.461243] systemd[1]: Finished Armbian ZRAM config.
[   18.492160] systemd[1]: Starting Armbian memory supported logging...
[   18.603662] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
[   18.622864] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[   20.965126] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   20.995026] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.034227] systemd[1]: Finished Armbian memory supported logging.
[   22.100482] systemd[1]: Starting Journal Service...
[   22.391110] systemd[1]: Started Journal Service.
[   22.461564] systemd-journald[876]: Received client request to flush runtime journal.
[   37.174828] VDDAO_3V3: disabling
[   52.011036] NFSD: Using UMH upcall client tracking operations.
[   52.038848] NFSD: starting 90-second grace period (net f0000000)

@lanyucomputer
Copy link
Author

armbian:~:# armbian-update 5.17.4
Ready to update, please wait...
Kernel version: 5.17.4
Start downloading kernel to [ /root ]...
01.01 The boot file download complete.
01.02 The dtb file download complete.
01.03 The modules file download complete.
01.04 The header file download complete.
custom_kernel_name: 5.17.4-flippy-72+
K510 [ 1 ]
Unpack [ 5.17.4-flippy-72+ ] related files ...
02.01 Unpack [ boot-5.17.4-flippy-72+.tar.gz ] complete.
02.02 Unpack [ dtb-amlogic-5.17.4-flippy-72+.tar.gz ] complete.
02.03 Unpack [ modules-5.17.4-flippy-72+.tar.gz ] complete.
02.04 Unpack [ header-5.17.4-flippy-72+.tar.gz ] complete.
The u-boot-zyxq.bin file copy is complete.
Successfully updated, automatic restarting...
Connection closing...Socket close.

Connection closed by foreign host.

Disconnected from remote host(10.0.0.113) at 22:01:25.

Type `help' to learn how to use Xshell prompt.

U盘启动后，armbian-update 5.17.4，这里显示Successfully updated，但重启后再也不能从U盘启动了

@lanyucomputer
Copy link
Author

Welcome to Armbian 22.05.0-trunk Focal with Linux 5.10.112-meson64-dev

No end-user support: built from trunk

System load: 9% Up time: 0 min
Memory usage: 13% of 1.89G IP: 172.17.0.1 10.0.0.203
10.0.0.204
CPU temp: 54°C Usage of /: 26% of 6.4G

[ General system configuration (beta): armbian-config ]

这个IP获取到的太多了，有三个IP了

@lanyucomputer
Copy link
Author

Welcome to Armbian 22.05.0-trunk Focal with Linux 5.17.4-flippy-72+

No end-user support: built from trunk

System load: 24% Up time: 1 min
Memory usage: 11% of 1.89G IP: 10.0.0.113
10.0.0.112
CPU temp: 54°C Usage of /: 49% of 2.6G
storage/: 39% of 255M

我也不知道是怎么重启了，然后就到了U盘里抽5.17版本了，真是奇怪

@ophub
Copy link
Owner

ophub commented Apr 22, 2022

armbian-update结束后自动重启。因为换了固件了，所以路由器里看到好几个armbian的mac地址不同的信息，其实就1个ip，其他的都是秒存在了一下就重载过去了。

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

感谢你的测试，为了和正版区分，这个伪造版专门设置了dtb和固件，取名Octopus Planet(FAKE)，安装序号202
以后的固件可以直接安装，已经内置了bootloader和专用dtb
咱们暂时结题关闭这个超长的帖子吧，有问题可以随时回复。

@ophub ophub closed this as completed Apr 22, 2022
@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited by ophub

感谢你的测试，为了和正版区分，这个伪造版专门设置了dtb和固件，取名Octopus Planet(FAKE)，安装序号202 以后的固件可以直接安装，已经内置了bootloader和专用dtb 咱们暂时结题关闭这个超长的帖子吧，有问题可以随时回复。

我也要谢谢你不厌其烦的帮忙调试，不然我只能用5.30的是吧，现在还有一个问题就是用了好几个DOCKER镜像都好像有问题，用的buddyfly/openwrt-aarch64的镜像也不行，可以启动，但出来的是这样的https://github.com/lanyucomputer/openwrt2022/blob/main/unifreqopenwrtaarch64latest.png ，还有你说的IP问题，它不是一闪就没有了，而是一直都在，我可以同时两个IP同时SSH，还有一个问题是修改不了这个文件用命令 nano /etc/resolv.conf，改是可以改，但重启后不知道为什么就还原了

@lanyucomputer
Copy link
Author

lanyucomputer commented Apr 22, 2022 •
edited by ophub

docker pull lanyucomputer/zyxq:latest 这个docker镜像是我自己用实体镜像打包的，不知道为什么这么大的体积，原版来自这里https://github.com/haiibo/OpenWrt ，我用了几个镜像好像都不正常，我不知道是armbian系统 的问题,还是docker镜像的问题

@lanyucomputer
Copy link
Author

docker pull lanyucomputer/zyxq:latest 这个进去之后的截图和buddyfly/openwrt-aarch64一样的，不知道是哪里出了问题，docker pull xuanaimai/phicomm-n1，这个可以勉强看到正常一些，但不能科学上网，有很多好像也不是很正常，暂时就测试了这么多

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

https://github.com/unifreq/openwrt_packit/blob/master/mk_openwrt_dockerimg.sh

flippy 的docker版OpenWrt：unifreq/openwrt-aarch64:latest

我没用过docker版的OpenWrt，但是flippy制作的应该没问题，用户很多，你试试

@lanyucomputer
Copy link
Author

https://github.com/unifreq/openwrt_packit/blob/master/mk_openwrt_dockerimg.sh

flippy 的docker版OpenWrt：unifreq/openwrt-aarch64:latest

试过了喔，你看上面有进去之后的图就是这样的https://github.com/lanyucomputer/openwrt2022/blob/main/unifreqopenwrtaarch64latest.png ，就是这样的，不显示型号，是内核 的问题吗？我的内核 太新了？如果说镜像没有问题，那就是我刷 的系统 有问题了？？

@ophub
Copy link
Owner

ophub commented Apr 22, 2022 •
edited

我没用过docker版的，不知道怎么设置，听说打开网卡混杂模式？恩山应该有很多这种docker跑OpenWrt的帖子。

@lanyucomputer
Copy link
Author

我没用过docker版的，不知道怎么设置，听说网卡打开网卡混杂模式？恩山应该有很多这种docker跑OpenWrt的帖子。

https://hub.docker.com/r/xuanaimai/onecloud 这里有详细的教程，混杂模式那些我都做了，我以前就是docker openwrt当旁路由，我都用了两年多了，很稳定，我想换一个配置高一点所以才折腾的章鱼

@lanyucomputer
Copy link
Author

nano /etc/resolv.conf 这个文件为什么不能改呢，我现在用的玩客云可以直接修改，重启也不会还原，现在5.10的改是可以改，但重启自动还原了

@QGB
Copy link

QGB commented Sep 5, 2022

No driver support for vblank timestamp query.

@lanyucomputer
Copy link
Author

No driver support for vblank timestamp query.

what do you mean? which deiver you need? it works very well

@ophub ophub mentioned this issue Feb 6, 2023
Closed
@ophub ophub mentioned this issue Feb 26, 2023
Closed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
documentation Improvements or additions to documentation support This need is supported
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@QGB @lanyucomputer @ophub