For Version information see https://github.com/orangesurf/orangesurf-seedsigner-case/blob/main/CHANGES.md
For Licence information see https://github.com/orangesurf/orangesurf-seedsigner-case/blob/main/LICENCE.md
For General information see https://github.com/orangesurf/orangesurf-seedsigner-case/blob/main/README.md
Suggested Version: V05
- v01 for FDM
- v02 is v01 modified for SLA (thinner walls)
- v03-beta is v02 modified for FDM printing
- v04 is live hinge button version with screw assembly
- v05 switches charging port to power only microUSB
Parts are confirmed to assemble readily when printed on Prusa MK3S with 0.4mm nozzle at the following settings
- Print all buttons upside down (on flat face) at lowest layer height possible. 0.05mm confirmed to work
- Print cover plate upside down (on flat face). 0.10mm confrmed to work
For V01-V03
- Print all buttons upside down (on flat face) at lowest layer height possible. 0.05mm confirmed to work