Skip to content

HOW TO BUILD THEM

Jump to bottom
p-chan5 edited this page Nov 22, 2023 · 36 revisions

Up to date with 1.2.0

  1. Reset each effect to its default values.

  2. Add Crossfeed. Set the following values:

Enable
No
Cutoff Feed
1864 Hz 6.0 dB
  1. Add Loudness. Set the following values:
Enable
No
Output Volume
-24.0 dB
  1. Add 1st Equalizer. Set the following values:
Enable
Yes

classical 🎻️

Bands
1
# Type Mode Slope Frequency Gain Quality
1 Bell RLC (BT) x1 392 Hz -18.00 dB 0.00

edm 🎹

Bands
2
# Type Mode Slope Frequency Gain Quality
1 Low-Shelf LRX (BT) x1 138 Hz 12.00 dB 0.00
2 Low-Shelf LRX (BT) x1 4434 Hz -12.00 dB 0.00

hifi 💥️

Bands
2
# Type Mode Slope Frequency Gain Quality
1 Low-Shelf LRX (BT) x1 138 Hz 18.00 dB 0.00
2 Low-Shelf LRX (BT) x1 4434 Hz -18.00 dB 0.00

kpop 🎤️

Bands
1
# Type Mode Slope Frequency Gain Quality
1 Bell RLC (BT) x1 783 Hz -12.00 dB 0.00

lofi 🍃️

Bands
1
# Type Mode Slope Frequency Gain Quality
1 Bell RLC (BT) x1 392 Hz -12.00 dB 0.00

rock 🎸️

Bands
1
# Type Mode Slope Frequency Gain Quality
1 Bell RLC (BT) x1 783 Hz -18.00 dB 0.00
  1. Add Bass Enhancer. Set the following values:
Enable
No
Blend Harmonics Amount Harmonics Scope Floor
-10 -6.0 dB 10.0 233 Hz Enable / 116 Hz
  1. Add Filter. Set the following values:
Type Mode Slope Frequency
High-Pass LRX (BT) x4 329
  1. Add 2nd Equalizer. Set the following values:
Enable
No
Bands Split Channels
1 Enable

Left

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 932 Hz 6.00 dB 0.00 3.00 oct

Right

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 7458 Hz 6.00 dB 0.00 3.00 oct
  1. Add 3rd Equalizer. Set the following values:
Enable
No
Bands Split Channels
2 Enable

Left

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 554 Hz 6.00 dB 0.00 1.50 oct
2 Ladder-Pass LRX (BT) x4 4434 Hz 6.00 dB 0.00 1.50 oct

Right

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 1567 Hz 6.00 dB 0.00 1.50 oct
2 Ladder-Pass LRX (BT) x4 12543 Hz 6.00 dB 0.00 1.50 oct
  1. Add 4th Equalizer. Set the following values:
Enable
No
Bands Split Channels
3 Enable

Left

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 466 Hz 6.00 dB 0.00 1.00 oct
2 Ladder-Pass LRX (BT) x4 1864 Hz 6.00 dB 0.00 1.00 oct
3 Ladder-Pass LRX (BT) x4 7458 Hz 6.00 dB 0.00 1.00 oct

Right

# Type Mode Slope Frequency Gain Quality Width
1 Ladder-Pass LRX (BT) x4 932 Hz 6.00 dB 0.00 1.00 oct
2 Ladder-Pass LRX (BT) x4 3729 Hz 6.00 dB 0.00 1.00 oct
3 Ladder-Pass LRX (BT) x4 14917 Hz 6.00 dB 0.00 1.00 oct
  1. Add 2nd Multiband Compressor. Set the following values:
Enable
No
Stereo Split Mode
Enable
# Enable Band Start Compression Mode Band Bypass Attack Time Attack Threshold Ratio Knee
1 Yes 0 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
2 Yes 138 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
3 Yes 4434 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
4 No Enable
5 No Enable
6 No Enable
7 No Enable
8 No Enable

Band Sidechain Options

# Reactivity
1 250.00 ms
2 250.00 ms
3 250.00 ms
  1. Add Compressor. Set the following values:
Enable
No

Compressor

Mode Attack Time Attack Threshold Release Time Ratio Knee
Upward 0.00 ms 0.0 dB 200.00 ms 1.50 0.0 dB

Sidechain

Stereo Split Mode Reactivity
Enable 250.00 ms
  1. Add Reverberation. Set the following values:
Enable
No
High Frequency Damping Room Size Diffusion Pre Delay Decay Time Wet Level Bass Cut Treble Cut
12543 Hz Large/smooth 0.00 20.00 ms 0.40 s -6.0 dB 196 Hz 12543 Hz
  1. Add Stereo Tools. Set the following values:
Enable
No

Stereo Matrix

Invert Phase (Right)
Enable

Output

Delay L/R
20.00 ms
  1. Add Autogain. Set the following values:
Enable
No
Target Reference
-10.0 dB Integrated
  1. Add Limiter. Set the following values:
Enable
Yes
Stereo Link Auto Leveling (ALR) ALR Attack ALR Release Knee
0.00 % Enable 0.10 ms 1000.00 ms 10.0 dB
  1. Add Level Meter. Set the following values:
Enable
No

indie 🍄️

  1. Add 1st Multiband Compressor. Set the following values:
Enable
Yes
# Enable Band Start Band Bypass Attack Time Attack Threshold Release Time Ratio Knee
1 Yes 0 Hz Enable
2 Yes 116 Hz 0.00 ms -48.0 dB 300.00 ms 2.00 0.0 dB
3 Yes 5274 Hz Enable
4 No Enable
5 No Enable
6 No Enable
7 No Enable
8 No Enable

Band Sidechain Options

# Reactivity
2 250.00 ms
  1. Add 2nd Multiband Compressor. Set the following values:
Enable
No
Stereo Split Mode
Enable
# Enable Band Start Compression Mode Band Bypass Attack Time Attack Threshold Ratio Knee
1 Yes 0 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
2 Yes 116 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
3 Yes 5274 Hz Upward 0.00 ms 0.0 dB 1.20 0.0 dB
4 No Enable
5 No Enable
6 No Enable
7 No Enable
8 No Enable

Band Sidechain Options

# Reactivity
1 250.00 ms
2 250.00 ms
3 250.00 ms
  1. Add Delay. Set the following values:
Enable
No
Delay (Right)
20.00 ms
  1. Add Maximizer. Set the following values:
Enable
Yes
Release
100.00 ms
Clone this wiki locally