README.ZSCONFIG

ZSCONFIG.H - A GUIDE
---------------------

zsconfig.h can include a number of options. Starting with pzs-ng beta 4, the
settings in zsconfig.h are overrides, meaning that not all of these settings
need be in zsconfig.h. Only the ones you change should be put there.
This provide a very flexible configuration, and upgrades should be less of a
hassle, since new settings in the config is no longer a concern - they will
be used with default settings.

Here follow a summary of all settings. I hope this will provide some idea on
what the different things does. The format is as follow:

<define> <option(s)>
        Description
        Default: <value>

To add a define, for instance sitepath_dir, put the following in you zsconfig.h

#define sitepath_dir	"/mysite/"

ie, add '#define" in front, and the option(s) behind.


-------------------------------------------------------------------------------

BAD_CRC <STRING>
	Error msg when crc check fails.
	Default: "CRC-Check: BAD!"

BAD_ZIP <STRING>
	Error msg when zip integrity fails.
	Default: "ZiP-Integrity: BAD!"

BANNED_BITRATE <STRING>
	Error msg when bitrate of musicfile is banned.
	%s = bitrate
	Default: "%s kbit codec is not allowed here!"

BANNED_FILE <STRING>
	Error msg when file is listed as banned.
	Default: "Banned file: Not allowed!"

BANNED_GENRE <STRING>
	Error msg when musicfile is of a banned genre.
	%s = genre
	Default: "%s is banned here!"

BANNED_YEAR <STRING>
	Error msg when musicfile is from a banned year.
	%s = year
	Default: "Releases from %s are not allowed here!"

DOUBLE_SFV <STRING>
	Error msg when a second sfv file is uploaded.
	Default: "SFV-file: DUPE!"

DUPE_NFO <STRING>
	Error msg when a 2nd nfo is uploaded.
	Default: "NFO-File: DUPE!"

EMPTY_FILE <STRING>
	Error msg when an empty (0byte) file is uploaded.
	Default: "0byte-file: Not allowed!"

EMPTY_SFV <STRING>
	Error msg when uploaded sfv does not contain any parsable lines.
	Default: "SFV-file: BAD!"

GROUPFILE <PATH>
	This is the location of glftpd's groupfile.
	Default: "/etc/group"

NOT_IN_SFV <STRING>
	Error msg when uploaded file is not found in the sfv.
	Default: "CRC-Check: Not in sfv!"

PASSWDFILE <PATH>
	This is the location of glftpd's passwd file.
	Default: "/etc/passwd"

SFV_FIRST <STRING>
	Error msg when sfv_first is enabled, and no sfv is uploaded prior to
	"normal" files.
	Default: "CRC-Check: SFV first!"

SPEEDTEST <STRING>
	Output when file is uploaded in a speedtest dir.
	Default: "BW: %.1fMiB (%.1fMB) @ %.2fMbps (%.2fMB/s)."

UNKNOWN_FILE <STRING>
	Error msg when filetype is not recognized or is listed as unwanted.
	%s = file extension
	Default: "%s-file: Not allowed!"

ZIP_NFO <STRING>
	Error msg when nfo file is uploaded in a zipdir.
	Default: "NFO-File: Not allowed here!"

accept_before_complete <TRUE|FALSE>
	This option specify if accept_script should run before complete_script
	or not.
	Default: FALSE

accept_script <PATH>
	Put here the path to the external script which should be run after
	a file is verified and ok.
	Default: "/bin/imdb_parse.sh"

affil_script <STRING>
	Enter here the name of the affil_script to be executed on affil
	uploads (not in group_dirs). The script will get the filename as arg.
	Default: "/bin/affilscript.sh"

allow_dir_chown_in_ng_chown <TRUE|FALSE>
	In ng-chown you have to specify a dir or a file to chmod. This setting
	allows/denies to change the ownership of that file/dir.
	Default: FALSE

allow_error2_in_unzip <TRUE|FALSE>
	If unzip exits with error code 1 or 2 (a generic error) - should the file
	be allowed anyway? There really shouldn't be any errors, so it's
	recommended to leave this setting to the default FALSE.
	Default: FALSE

allow_file_resume <TRUE|FALSE>
	Broken transfers may be a problem on some sites. Glftpd2 and pzs-ng
	allow you to resume such files by setting this to TRUE.
	Default: FALSE

allow_files_chown_in_ng_chown <TRUE|FALSE>
	In ng-chown you have to specify a dir or a file to chmod. If you specify
	a dir, this setting will chown the files in that dir, but not the dir
	itself.
	Default: FALSE

allow_files_not_in_sfv <TRUE|FALSE>
	Should we allow files uploaded that is not in the sfv? This is only
	valid on upload (not rescan etc), and is normally not used. Please
	note that this is a override option - you may be not like everything
	this option allows on your site...
	Default: FALSE

allow_gid_change_in_ng_chown <TRUE|FALSE>
	Same as with allow_uid_change_in_ng_chown, only with gid.
	Default: FALSE

allow_slash_in_sfv <TRUE|FALSE>
	Allow slashes '/' in sfv? If TRUE whatever is behind the last slash is
	taken as the filename. If FALSE, the sfv is rejected.
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_lowercase
	                   sfv_cleanup_crlf sfv_lenient deny_double_sfv
	                   deny_resume_sfv sfv_cleanup_comments
	Default: TRUE

allow_uid_change_in_ng_chown <TRUE|FALSE>
	ng-chown is a binary that changes the uid/gid of files dirs. In
	order for it to work you have to enable a few things. This variable
	will let ng-chown change the uid of files/dirs. ng-chown need to be
	chmod'ed +s for it to work too.
	Default: FALSE

allowed_constant_bitrates <STRING>
	You can restrict uploaded audio releases several ways. For mp3 one
	is by bitrate. Only CBR (Constant Bit Rate) mp3-files are of interest
	via this setting. The list you define should be comma-separated.
	Default: "160,192"

allowed_genres <STRING>
	Instead of listing all denied genres, you can list all allowed genres.
	Put here a comma-separated list of allowed genres.
	Default: "Top 40,Pop Funk,Rock,Pop"

allowed_types <STRING>
	This variable holds a comma-separated list of extensions. All files
	with any of these extensions are allowed and not checked.
	Default: "jpg,jpeg,cue,m3u,txt,vob,png,m2ts,ts,log"

allowed_types_exemption_dirs <PATHS>
	In allowed_types we define filetypes that are allowed on site w/o
	any checks. Define here paths where these filetypes should be checked
	*if* an sfv is uploaded.
	Default: "/site/incoming/musicvideos/"

allowed_years <STRING>
	Another way to restrict audio-releases is by year. Define here a list
	of years allowed on site. The list should be comma-separated.
	Default: "2010,2011,2012,2013,2014,2015"

always_scan_audio_syms <TRUE|FALSE>
	On cleanup symlinks are removed. However, if cleanup is used as a
	cscript, only current dir will be checked. You can make sure to
	clean up broken audio-symlinks as well, by setting this variable to
	TRUE. Because audio archives can get huge, this is not on by default.
	Default: FALSE

announce_norace <TRUE|FALSE>
	If this variable is set to FALSE, announces with only one racer will
	not be announced.
	Default: TRUE

audio_allowed_genre_check <TRUE|FALSE>
	Should the audio release be checked against your defined genres?
	Only audio_banned_genre_check OR audio_allowed_genre_check should be
	set to TRUE - not both.
	Default: FALSE

audio_artist_noid3 <TRUE|FALSE>
	If you sort audio by artist ID3 tag will be used to get the first
	char of the artist. If you would like to use the first char of the
	release-name instead, set this to TRUE.
	Default: FALSE

audio_artist_nosub <TRUE|FALSE>
	If you sort audio by artist, a dir with the first char in the artist is
	created under audio_artist_path, and then a link to the actual release
	is made. audio_artist_nosub, if set to TRUE, will instead create dirs
	based on the full name of the artist, and then put a link in that dir
	instead.
	Default: FALSE

audio_artist_path <PATH>
	If you choose to sort audio releases by artist, this is the place
	where the symlinks will be created. This dir must be created in order
	for the sorting to work - the zipscript will not create it for you.
	Default: "/site/incoming/music.by.artist/"

audio_artist_sort <TRUE|FALSE>
	If you wish to sort audio releases by artist, set this to TRUE.
	Default: FALSE

audio_artist_sort_various_only <TRUE|FALSE>
	An audio release containing multiple artists and having VA-/VA_
	start the releasename, will be sorted in artist subdirs for each
	appearing artist and in the VA-sortdir. Set this to TRUE to only
	sort in the VA-sortdir.
	Default: FALSE

audio_banned_genre_check <TRUE|FALSE>
	Should the audio release be checked against your defined genres?
	Only audio_banned_genre_check OR audio_allowed_genre_check should be
	set to TRUE - not both.
	Default: TRUE

audio_cbr_check <TRUE|FALSE>
	Should the zipscript check for allowed bitrate on CBR audio/mp3
	releases? Set to TRUE if yes.
	Default: TRUE

audio_cbr_warn <TRUE|FALSE>
	If the audio-release is not in the list of allowed cbr bitrates, should
	the zipscript log a warning message instead of deleting the file? Set
	to TRUE if yes.
	Default: TRUE

audio_completebar <STRING|DISABLED>
	When a release is complete, a 'complete bar' will be created. Define
	here how it should look like on audio releases. If you want multiple
	completebars _per release_, separate them with "\n" (Like "foo\nbar").
	Default: "[%Z] - ( %.0mM %fF - COMPLETE - %w %Y ) - [%Z]"

audio_genre_path <PATH>
	If you choose to sort audio releases by genre, this is the place
	where the symlinks will be created. This dir must be created in order
	for the sorting to work - the zipscript will not create it for you.
	Default: "/site/incoming/music.by.genre/"

audio_genre_sort <TRUE|FALSE>
	If you wish to sort audio releases by genre, set this to TRUE.
	Default: FALSE

audio_genre_warn <TRUE|FALSE>
	If the audio-release is not part of allowed genres, should the
	zipscript log a warning message instead of deleting the file? Set to
	TRUE if yes.
	Default: TRUE

audio_group_path <PATH>
	If you choose to sort audio releases by group, this is the place
	where the symlinks will be created. This dir must be created in order
	for the sorting to work - the zipscript will not create it for you.
	Default: "/site/incoming/music.by.group/"

audio_group_sort <TRUE|FALSE>
	If you wish to sort audio releases by group, set this to TRUE.
	Default: FALSE

audio_ignored_languages <STRING>
	To prevent audio language sorting of languages that isn't, well,
	languages, list here what should be ignored. Not case sensitive, and
	the list is comma separated.
	Default: "md,cd,lp,ep,va"

audio_language_path <PATH>
	If you choose to sort audio releases by language, this is the place
	where the symlinks will be created. This dir must be created in order
	for the sorting to work - the zipscript will not create it for you.
	Default: "/site/incoming/music.by.language/"

audio_language_sort <TRUE|FALSE>
	If you wish to sort audio releases by language, set this to TRUE.
	Default: FALSE

audio_nocheck_dirs <PATHS>
	Audio-files can be checked against a list of allowed/denied genres,
	years etc. Audio-files found in paths defined in this variable will
	not be checked against these defines, thus allowing them. Dirs are
	separated by a space character.
	Default: "/site/groups/ /site/incoming/requests/"

audio_nosort_dirs <PATHS>
	If you do not want to sort the audio-files in certain dirs (but still
	want to check for validity and announce them in chan) you can define a
	list of dirs in this variable.
	Default: "/site/incoming/requests/"

audio_types <STRING>
	Comma-separated list of files considered to be audio files. Sorting will
	apply on directories containing these.
	Default: "mp3,flac"

audio_year_check <TRUE|FALSE>
	Should the zipscript check for allowed years on audio releases? Set
	to TRUE if yes.
	Default: TRUE

audio_year_path <PATH>
	If you choose to sort audio releases by year, this is the place
	where the symlinks will be created. This dir must be created in order
	for the sorting to work - the zipscript will not create it for you.
	Default: "/site/incoming/music.by.year/"

audio_year_sort <TRUE|FALSE>
	If you wish to sort audio releases by year, set this to TRUE.
	Default: FALSE

audio_year_warn <TRUE|FALSE>
	If the audio-release is not in the list of allowed years, should the
	zipscript log a warning message instead of deleting the file? Set to
	TRUE if yes.
	Default: TRUE

banned_filelist <PATH>
	You can ban certain files on site, based on name. The check is not
	case-sensitive, and wildcards may be used.
	Put here the path to the text-file with a list of the files you do not
	want on your site.
	For more info, or upgraded lists, see http://project-sl.swecheck.net
	Please note - chars like [ and ] are used in the wildcard scheme - if you
	search for such chars in the filenames, you need to double-escape them,
	ie \\[ and \\] and \\( etc.
	For more info on how wildcards are read, read manpage of fnmatch().
	Default: "/ftp-data/misc/banned_filelist.txt"

banned_genres <STRING>
	You can also restrict by genre. Use this variable to define genres
	not allowed on your site. Genres are separated by a comma.
	Default: "Christian Rap,Christian Gangsta Rap,Contemporary Christian,Christian Rock"

benchmark_mode <TRUE|FALSE>
	This option will show the user uploading an estimate of how long it
	took the zipscript to scan the uploaded file.
	Default: TRUE

change_spaces_to_underscore_in_ng_chown <TRUE|FALSE>
	Some ftp-clients have trouble reading the names of uid/gid if they have
	spaces in them. This will search for a uid/gid with a underscore, if
	the name (genre) given has a space inside. It is recommended to *NOT*
	change this value (from TRUE).
	Default: TRUE

charbar_filled <CHAR>
	The progressbar consist of two chars, which together marks the progress
	of the release. Put here the char to be used to mark uploaded files.
	Default: "#"

charbar_missing <CHAR>
	The progressbar consist of two chars, which together marks the progress
	of the release. Put here the char to be used to mark missing files.
	Default: ":"

check_for_banned_files <TRUE|FALSE>
	Will check the banned_filelist when uploading files - if one is
	encountered, the zipscript will deny the upload.
	Default: TRUE

check_for_missing_nfo_dirs <PATHS>
	Normally each release has a .nfo included. It has info about the
	release written by the release-group, and may contain vital info
	like serials etc. The paths defined in this value will be checked
	for missing nfo after the release is marked as 'complete'. Separate
	dirs with a space character.
	Default: "/site/incoming/games/ /site/incoming/apps/"

check_for_missing_sample_dirs <PATHS>
	Each movie-release should have a sample included, to show quality.
	The paths defined in this value will be checked for missing samples.
	Separate dirs with a space character.
	Default: "/site/incoming/movies/"

chmod_completebar <TRUE|FALSE>
	When TRUE, the permissions on the file/dir is changed to 0222. This is
	to prevent it from being transfered on download/fxp.
	Note that this will not happen in group-dirs.
	Default: FALSE

cleanupdirs <PATHS>
	To keep your site tidy and free from stale/dead symlinks created by the
	zipscript, you should put here a list of dirs to scan for dead links.
	The list is not recursive, and does not take wildcards.
	Default: "/site/test/ /site/incoming/games/ /site/incoming/apps/ /site/incoming/musicvideos/"

cleanupdirs_dated <PATHS>
	To keep your site tidy and free from stale/dead symlinks created by the
	zipscript, you should put here a list of dirs to scan for dead links.
	The list is not recursive, and does not take wildcards. This list can
	contain format cookies for dated directories, refer to 'man strftime' 
	for a list of available date cookies.
	Default: "/site/incoming/0day/%m%d/ /site/incoming/mp3/%m%d/"

combine_path <TRUE|FALSE>
	Some clients do not cwd into the releasedir before uploading file(s).
	To allow such clients this option must be set to TRUE.
	Default: FALSE

complete_script <PATH>
	Put here the path to the external script which should be run after a
	release is marked complete.
	Default: "/bin/nfo_copy.sh"

crc_algo <CRC_STANDARD|CRC_SLICEBY4|CRC_SLICEBY8>
	The crc-algorithm to be used. Normally sliceby8 > sliceby4 > standard,
	but on some limited hardware this order is different.
	Default: CRC_SLICEBY8

create_incomplete_links_in_group_dirs <TRUE|FALSE>
	Should incomplete indicators be created in groupdirs? With the default
	settings this should be no problem, but if you change the location of
	the links, it may very well be.
	Default: TRUE

create_m3u <TRUE|FALSE>
	If you wish to create .m3u files on complete audio-releases, set this to
	TRUE.
	Default: TRUE

create_missing_files <TRUE|FALSE>
	To easily see what files are missing in a release, the zipscript can
	create a 0-byte file of each missing file (filename-missing). This
	file will be removed when the file is uploaded and found free of
	errors.
	Default: TRUE

create_missing_sample_link <TRUE|FALSE>
	Movie-releases should have a sample. This setting will check for
	missing samples in releases.
	Default: FALSE

create_missing_sfv <TRUE|FALSE>
	If this option is set to TRUE, the rescan binary will create sfv files
	if none is found in the dir.
	Default: FALSE

create_missing_sfv_link <TRUE|FALSE>
	normally releases have a sfv, unless they are zip releases. This
	setting will check for missing sfv in releases.
	Default: TRUE

custom_group_dirs_complete_message <STRING|DISABLED>
	If you rather would like to put in a predefined message in the
	.message in group-dirs, define here what that message should be.
	Setting this variable to DISABLED disables it.
	Default: "... Looks like this is a pre. :)\n"

days_back_cleanup <NUMBER>
	This setting defines how many days backward should be scanned on
	cleanup. 0=disabled, 1=today only, 2=yesterday and today etc.
	Default: 2

debug_altlog <TRUE|FALSE>
	If debug is on, you can choose wether you wish to have the .debug file
	in the releasedir, or in the mirrored tree created in 'storage'. Please
	note that if you choose to put the debug file in the 'storage' path,
	some debug-info may be lost. Setting this to TRUE will use the
	'storage' path, while FALSE will use the upload-dir.
	Note that the debug file will be named 'debug' in the 'storage' and
	'.debug' in the releasedir.
	Related option(s): debug_mode debug_announce
	Default: TRUE

debug_announce <TRUE|FALSE>
	If this variable is set to TRUE, and debug_mode is set to TRUE the
	zipscript will announce to the uploader that the script is running in
	debug mode. The announce is done at the very beginning of the script,
	which means that it should give some output no matter what, if it
	manages to start. Good to find out if the script has actually been
	executed.
	If the script(s) are unable to write to .debug and debug_announce is
	on, the debug msg's will be pasted to the client instead.
	Related option(s): debug_mode debug_altlog
	Default: FALSE

debug_mode <TRUE|FALSE>
	If something seems weird/doesn't work, you should debug. Setting this
	variable to TRUE will turn on debugging. A file named .debug will be
	created, normally in the same dir as the upload-dir.
	Related option(s): debug_altlog debug_announce
	Default: FALSE

del_banned_release <TRUE|FALSE>
	If you want to make absolutely sure the banned release does not take up
	more bandwith or space than necessary, you can choose to completely
	remove the releasedir.
	NOTE: This will override the *_warn setting - ie, you will get a warning
	announce, but the file along with the entire dir will be removed.
	Default: FALSE

del_audio_completebar <STRING|DISABLED>
	This setting is what the zipscript will search for (and delete) when
	it updates the complete bar for audio releases.
	Default: "^\\[.*] - \\( .*F - COMPLETE - .*) - \\[.*]$"

del_other_completebar <STRING|DISABLED>
	This setting is what the zipscript will search for (and delete) when
	it updates the complete bar for other releases.
	Default: "^\\[.*] - \\( .*F - COMPLETE ) - \\[.*]$"

del_rar_completebar <STRING|DISABLED>
	This setting is what the zipscript will search for (and delete) when
	it updates the complete bar for rar releases.
	Default: "^\\[.*] - \\( .*F - COMPLETE ) - \\[.*]$"

del_video_completebar <STRING|DISABLED>
	This setting is what the zipscript will search for (and delete) when
	it updates the complete bar for video releases.
	Default: "^\\[.*] - \\( .*F - COMPLETE ) - \\[.*]$"

del_zip_completebar <STRING|DISABLED>
	This setting is what the zipscript will search for (and delete) when
	it updates the complete bar for zip releases.
	Default: "^\\[.*] - \\( .*F - COMPLETE ) - \\[.*]$"

del_progressmeter <STRING>
	On upload a complete-bar is created after each file, to show how
	complete the release is. Put here what to search for when updating
	that bar - the file(s) matching this will be deleted.
	Default: "^\\[.*] - .*%% Complete - \\[.*]$"

del_progressmeter_audio <STRING>
	On upload a complete-bar is created after each file, to show how
	complete the release is. Put here what to search for when updating
	that bar - the file(s) matching this will be deleted.
	This is for audio releases only.
	Default: "^\\[.*] - .*%% Complete - (.*) \\[.*]$"

delbanned_script <PATH>
	Enter the name of the script which is called when a release is
	banned and will be deleted. The argument given is the full
	chrooted path, and if the script exits with a non-zero value,
	the dir is not removed. The example script marks a dir as deleted
	in glftpd's dirlog.
	Default: "/bin/ng-deldir"

delete_old_link <TRUE|FALSE>
	If you do NOT want to have the zipscript/rescan/audiosort delete any
	links with the same name when it tries to create a new link, set this 
	to FALSE. This will cause rescan / audiosort to be useless if there
	already are sortedlinks for this release.
	Default: TRUE

deny_double_nfo <TRUE|FALSE>
	This is usually done (better) with a 3rd party app, but ... You can
	deny a nfo upload if one already exists in the same dir.
	Default: FALSE

deny_double_sfv <TRUE|FALSE>
	With sfv releases, there should be only one sfv file allowed. This can
	be done two ways - either by force or by being 'smart'. Setting this
	option to TRUE will deny any new sfv in the dir, if a sfv already has
	been uploaded. Setting it to FALSE will make the zipscript check the
	new sfv first, compare it to the old sfv file and make a decision
	based on the content of the sfv. If the new sfv contains more files
	than the old one, and they match with what is already uploaded in the
	dir, it will be allowed and used. If it does not, it will be denied.
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_lowercase
	                   sfv_cleanup_crlf sfv_lenient deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: FALSE

deny_nfo_upload_in_zip <TRUE|FALSE>
	Should we deny nfo uploads in zip dirs? Should really only be used in
	conjuntion with extract_nfo.
	Default: FALSE

deny_resume_sfv <TRUE|FALSE>
	This option works like deny_double_sfv, only it will deny even resumed
	or overwritten sfv files. If that happens, a backup of the original sfv
	will be copied back to the release.
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_lowercase
	                   sfv_cleanup_crlf sfv_lenient deny_double_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

dirlogpath <PATH>
	This is the location of glftpd's dirlog. The file must be world
	read/writable (+rw), and so must the containing dir (+rwx).
	Default: "/ftp-data/logs/dirlog"

disable_audio_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_newleader <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_norace_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_norace_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_race <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_sfv <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_audio_update <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_newleader <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_norace_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_norace_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_race <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_sfv <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_other_update <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_newleader <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_norace_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_norace_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_race <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_sfv <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_rar_update <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_newleader <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_norace_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_norace_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_race <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_sfv <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_video_update <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_newleader <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_norace_complete <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_norace_halfway <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_race <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_sfv <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

disable_zip_update <TRUE|FALSE>
	You can choose to disable some announces. Set to TRUE to disable the
	announce.
	Default: FALSE

dupepath <PATH>
	This is the location of glftpd's dupefile. The file must be world
	read/writable (+rw), and so must the containing dir (+rwx).
	Default: "/ftp-data/logs/dupefile"

enable_accept_script <TRUE|FALSE>
	An external script can be run after a file is verified and ok. Put
	this to TRUE to run the external script.
	Default: FALSE

enable_affil_script <TRUE|FALSE>
	If you wish to do something on affil upload (not in group_dirs) like
	chown'ing the file, you can enable the this here.
	Default: FALSE

enable_complete_script <TRUE|FALSE>
	An external script can be run after a release is complete. Put this to
	TRUE to run the external script.
	Default: FALSE

enable_delbanned_script <TRUE|FALSE>
	When del_banned_release is TRUE, the banned release will be removed,
	but the dirlog stays unaffected. The delbanned_script executes before
	the directory is removed and marks it as deleted in the dirlog.
	Default: TRUE

enable_files_ahead <TRUE|FALSE>
	To limit the amount of logging on races, you can choose to only report
	a new leader in a race if a racer is leading with a certain amount of
	files. Set to TRUE to enable this feature.
	Default: TRUE

enable_audio_script <TRUE|FALSE>
	Put here the path to the external script which should be run after
	the first uploaded audiofile in an audio-release.
	Default: FALSE

enable_nfo_script <TRUE|FALSE>
	An external script can be run after a nfo upload. Put his to TRUE to
	run the external script.
	Default: FALSE

enable_rescan_script <TRUE|FALSE>
	An external script can be run after rescan and the release is complete.
	Note that this option is not valid on zip releases.
	Put this to TRUE to run the external script.
	Default: FALSE

enable_sample_script <TRUE|FALSE>
	Should a script be executed after sample uploads? Only valid on uploads
	in sample dirs (see sample_list for info), and only if file is a
	video file.
	Default: FALSE

enable_unduper_script <TRUE|FALSE>
	If you allow sfv to be uploaded after other files, some files may be
	marked as bad when the sfv is read and compared to the crc of the file.
	The file is then deleted, and a new one needs be uploaded. In order
	for that to happen, the file needs to be unduped, or it will be denied
	by glftpd. Set this variable to TRUE to run an external script after
	a file has been marked as bad, and which undupes it.
	Default: TRUE

exclude_non_sfv_dirs <TRUE|FALSE>
	Applies only to audio releases - NEEDS MORE INFO HERE!!!!!
	Default: TRUE

extract_nfo <TRUE|FALSE>
	Should the zipscript extract the "real" nfo from a zip?
	Default: TRUE

force_sfv_first <TRUE|FALSE>
	In sfv_dirs, you can either allow files to be uploaded by default and
	checked later when the sfv arrives, or you can force the uploader to
	first provide a sfv before any other filetype is allowed. Setting this
	to TRUE will do the latter.
	Default: FALSE

get_competitor_list <TRUE|FALSE>
	This setting, if set to TRUE, will put a list of all racers
	excluding the current user into a special cookie.
	Default: TRUE

get_user_stats <TRUE|FALSE>
	If this is set to true, the zipscript will try to fetch stats from the
	racers userfiles.
	Default: TRUE

gl_sections <STRING>
	Here you should put a list of all sections on your site. Sections is
	not the same as dirs, but is what you have defined as sections in
	glftpd.conf. See glftpd's docs for more info on sections.
	First section is normally named 'DEFAULT'. The order in which you put
	the names of the sections are important. Separate sections with a
	space character.
	Default: "DEFAULT"

gl_userfiles <PATH>
	This is the place where userfiles are stored. The files must be world
	readable (+r).
	Default: "/ftp-data/users/"

group_dirs <PATHS>
	This is the place(s) where your site's groups/affilliates have space
	provided. Normally each (release-)group have a designated area
	accessible only to the group's members, in which they upload a new
	release and 'pre' it (release it) simultanously on several sites.
	Uploads and races in these dirs will not be logged. Dirs are separated
	with the space character.
	Default: "/site/groups/"

hide_affil_gname <STRING>
	What to replace hidden affil groupnames with.
	Default: "NoGroup"

hide_affil_groups <STRING>
	Comma separated list of groups to hide. Will replace the groupname with
	the string in hide_affil_gname if non-empty, and replace the username
	with hide_affil_uname if non-empty.
	Default: ""

hide_affil_uname <STRING>
	What to replace hidden affil usernames with.
	Default: "NoUser"

hide_affil_users <STRING>
	Comma separated list of users to hide. Will replace the username with
	the string in hide_affil_uname if non-empty.
	Default: ""

hide_gname <STRING>
	Set here something you wish to use instead of the groupname when
	hiding users. Setting this empty will not change groupname.
	Default: ""

hide_group_uploaders <TRUE|FALSE>
	If you wish to hide the names of the member of a releasegroup in the
	.message file, this option will 'hide' the uploader.
	Default: TRUE

hide_uname <STRING>
	Set here something you wish to use instead of the username when
	hiding users. Setting this empty will make the username the same
	as groupname, unless show_users_in_group_dirs is set to TRUE.
	Default: ""

ignore_lock_timeout <TRUE|FALSE>
	If a lock cannot be obtained within the time set in
	max_seconds_wait_for_lock, the zipscript will usually exit with an
	error. You can, however, bypass this so it checks the file as normal.
	This can lead to race-conditions, however, so it's set to FALSE by
	default. Usually such conditions should *never* occur, but may in
	rare conditions, especially if 3rd party scripts/addons are being
	used.
	Default: FALSE

ignore_zero_size <TRUE|FALSE>
	This option is for debugging purposes only. Normally files of size
	0 bytes are logged as bad, meaning glftpd will delete them. This
	option makes it possible to allow such files.
	Default: FALSE

ignore_zero_sized_on_rescan <TRUE|FALSE>
	Sometimes a release is approved, which usually is not according to
	site rules. One of the ways to approve a dir is to create a 0-sized
	file in the dir, with the word APPROVED or ALLOWED somewhere.
	This setting will ignore all zero-sized files on rescan.
	Default: FALSE

ignored_types <STRING>
	Files found with an extension listed in this variable are denied on
	upload, and ignored on rescan/postdel/etc. The list is comma-separated.
	Defining a file with no extension can be done by starting the list
	with a comma. The dot before the extension should not be added.
	.diz, .message and .debug is normally generated by the zipscript, so
	these types should be listed here. Also add types 3rd party scripts
	commonly make, like .imdb, .html, .url, .date etc.
	Default: ",diz,debug,message,imdb,html,url,metadata,date,xxxdata,ioftpd"

incomplete_base_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in multi-cd releases.
	Default: "../../(no-nfo)-%1"

incomplete_base_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in multi-cd releases.
	Default: "../../(no-sample)-%1"

incomplete_base_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in multi-cd releases.
	Default: "../../(no-sfv)-%1"

incomplete_cd_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on multi-cd releases.
	Default: "../../(incomplete)-(%0)-%1"

incomplete_generic1_base_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in multi-cd releases.
	Default: "/site/incompletes/(no-nfo)-%1"

incomplete_generic1_base_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in multi-cd releases.
	Default: "/site/incompletes/(no-sample)-%1"

incomplete_generic1_base_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in multi-cd releases.
	Default: "/site/incompletes/(no-sfv)-%1"

incomplete_generic1_cd_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on multi-cd releases.
	Default: "/site/incompletes/(incomplete)-(%0)-%1"

incomplete_generic1_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on normal releases.
	Default: "/site/incompletes/(incomplete)-%0"

incomplete_generic1_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in normal releases.
	Default: "/site/incompletes/(no-nfo)-%0"

incomplete_generic1_path <PATH>
	If dir matches this string, the generic1 indicators will be used
	to create the incomplete indicators.
	Default: ""

incomplete_generic1_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in normal releases.
	Default: "/site/incompletes/(no-sample)-%0"

incomplete_generic1_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in normal releases.
	Default: "/site/incompletes/(no-sfv)-%0"

incomplete_generic2_base_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in multi-cd releases.
	Default: "/site/incompletes/(no-nfo)-%1"

incomplete_generic2_base_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in multi-cd releases.
	Default: "/site/incompletes/(no-sample)-%1"

incomplete_generic2_base_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in multi-cd releases.
	Default: "/site/incompletes/(no-sfv)-%1"

incomplete_generic2_cd_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on multi-cd releases.
	Default: "/site/incompletes/(incomplete)-(%0)-%1"

incomplete_generic2_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on normal releases.
	Default: "/site/incompletes/(incomplete)-%0"

incomplete_generic2_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in normal releases.
	Default: "/site/incompletes/(no-nfo)-%0"

incomplete_generic2_path <PATH>
	If dir matches this string, the generic2 indicators will be used
	to create the incomplete indicators.
	Default: ""

incomplete_generic2_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in normal releases.
	Default: "/site/incompletes/(no-sample)-%0"

incomplete_generic2_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in normal releases.
	Default: "/site/incompletes/(no-sfv)-%0"

incomplete_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on normal releases.
	Default: "../(incomplete)-%0"

incomplete_nfo_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing nfo in normal releases.
	Default: "../(no-nfo)-%0"

incomplete_sample_indicator <STRING>
	On upload an indicator is created if sample is missing.
	This variable defines indicators on missing sample in normal releases.
	Default: "../(no-sample)-%0"

incomplete_sfv_indicator <STRING>
	On upload an indicator is created after each file, to show still
	incomplete releases. Put here how that indicator will look.
	This variable defines indicators on missing sfv in normal releases.
	Default: "../(no-sfv)-%0"

incompleteislink <TRUE|FALSE>
	While a release is incomplete, a link will be created pointing to
	the releasedir. You can define if it will be a file (FALSE) or
	a symbolic link (TRUE).
	Default: TRUE

lock_optimize <NUMBER>
	This option is meant to minimize impact the runtime of the locking.
	The number represents the number of seconds that must pass before the
	lock is touched/updated. Usually, this is either set to 1 or 0.
	0 disable this feature.
	Default: 1

log <PATH>
	This setting should point to a file where all logging will occur. The
	usual place is glftpd's glftpd.log. This file must be world read/
	writable (+rw).
	Default: "/ftp-data/logs/glftpd.log"

mark_empty_dirs_as_incomplete_on_rescan <TRUE|FALSE>
	If you wish to mark an empty dir as incomplete, set this to TRUE. Empty
	dirs that are rescanned will then be marked as incomplete
	Default: FALSE

mark_file_as_bad <TRUE|FALSE>
	Normally files marked as bad are deleted. You can change this by setting
	the following value to TRUE - instead of the file being deleted, it will
	be renamed <filename>.bad. Bad files are ignored on rescan.
	Default: FALSE

max_groups_in_top <NUMBER>
	Put here the maximum number of groups to be logged in a race, when a
	release is complete.
	Default: 7

max_seconds_wait_for_lock <NUMBER>
	This number representents the maximum number of seconds a process will
	wait for a lock on release. Usually only a second or two will actually
	be used, since the only program using time by default is rescan, and it
	has a low priority, which the other processes will provide a signal to
	quit.
	Anyway, not something you should worry too much about, unless your site
	usually holds files in the 100MB area on a slow/busy server that're
	rescanned on a regular basis.
	Default: 20

max_users_in_top <NUMBER>
	Put here the maximum number of users to be logged in a race, when a
	release is complete.
	Default: 7

message_file_name <STRING|DISABLED>
	What name should the complete_message file have?
	Default: ".message"

message_footer <STRING|DISABLED>
	Define here what should be put at the bottom of the complete_message
	file.
	Default: "`-----================---------------------------==------------------'\n"

message_group_body <STRING|DISABLED>
	Define here the body of the list of racers (groups).
	Default: "| %3n %-29g %7.1mM %4fF %5.1p%% %7.0sKBs |\n"

message_group_footer <STRING|DISABLED>
	Define here the footer of the list of racers (groups).
	Default: "|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |\n| %3g Total %31.1mM %4fF 100.0%% %7.0aKBs |\n"

message_group_header <STRING|DISABLED>
	Define here what should be put above a list of racers (groups).
	Default: "|                                                                    |\n|-=[ G R O U P T O P ]=-------------.                                |\n|                                    `--------------===--------------|\n"

message_header <STRING|DISABLED>
	Define here what should be put in the top of the complete_message.
	Default: ".-----------------====-------------------------== PZS-NG v1.2.0 ===--.\n"

message_audio <STRING|DISABLED>
	Define here a special complete_message for audio-releases.
	Default: "|                                                                    |\n|-=[ I D 3 - T A G ]=---------------.                                |\n|                                    `-----==-------------===--------|\n| Artist : %-57x |\n| Album  : %-57W |\n| Genre  : %-34w Rate  : %3Xkbit/s      |\n| Tracks : %-34f Year  : %-14Y |\n| Encoder: %-34i Preset: %-14I |\n"

message_store_in_mirror <TRUE|FALSE>
        Enable this to have the message_file_name stored in the mirror location where the racedata is stored, defined by "storage".
        A symlink is made in the releasedir pointing to the real message_file_name, with the same name.
        Default: FALSE

message_user_body <STRING|DISABLED>
	Define here the body of the list of racers (users).
	Default: "| %3n %-29U %7.1mM %4fF %5.1p%% %7.0sKBs |\n"

message_user_footer <STRING|DISABLED>
	Define here the footer of the list of racers (users).
	Default: "|- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |\n| %3u Total %31.1mM %4fF 100.0%% %7.0aKBs |\n"

message_user_header <STRING|DISABLED>
	Define here what should be put above a list of racers (users).
	Default: "|-=[ U S E R T O P ]=---------------.                                |\n|                                    `-----------------====----------|\n"

min_halfway_files <NUMBER>
	Define here the minimum number of files in the RELEASE to announce a
	halfway message.
	Default: 10

min_halfway_size <NUMBER>
	Define here the minimum estimated total size (in MB) of RELEASE to
	announce a halfway message.
	Default: 10

min_newleader_files <NUMBER>
	Define here the minimum number of files in the RELEASE to announce a
	new leader in a race.
	Default: 1

min_newleader_size <NUMBER>
	Define here the minimum estimated total size (in MB) of RELEASE to
	announce a new leader in a race.
	Default: 10

min_update_files <NUMBER>
	Define here the minimum number of files in the RELEASE to announce an
	update message.
	Default: 2

min_update_size <NUMBER>
	Define here the minimum estimated total size (in MB) of RELEASE to
	announce an update message.
	Default: 1

missing_sample_check_ignore_dividers <STRING>
	List of characters that can be around the strings listed in
	missing_sample_check_ignore_list. Leave this empty if you want to
	match parts of dirnames without them being surrounded.
	This list is casesensitive.
	Example: With "proof" in missing_sample_check_ignore_list,
	Proof.Of.Concept-GRP would only be matched if
	missing_sample_check_ignore_dividers is empty.
	Default: "._-"

missing_sample_check_ignore_list <STRING>
	If a dirname under the paths listed in check_for_missing_sample_dirs
	has any of the strings in this list, then a sample is not required
	and no incomplete_sample_indicator is created.
	Every string is checked to be surrounded by the chars in
	missing_sample_check_ignore_dividers. This implies that the first and
	last character of a dirname are never checked as part of a listed
	string, unless missing_sample_check_ignore_dividers is empty.
	Separate strings with a comma character. List is not casesensitive.
	Default: "dirfix,fix,freezefix,fullsubpack,nfofix,proof,rarfix,subfix,subpack,subpck,syncfix,prooffix"

audio_script <PATH>
	Put here the path to the external script which should be run after
	the first uploaded audiofile in an audio release.
	Default: "/bin/ng-chown"

audio_script_cookies <STRING>
	Put here what should be used as args for the external script after
	the first uploaded audiofile in an audio release.
	Default: "0 0 0 1 0 1 - \"%w\" \"%?\""

newleader_files_ahead <NUMBER>
	Define here how many files ahead a racer must be before the zipscript
	announces him as new leader.
	Default: 2

nfo_script <PATH>
	Put here the path to the external script which should be run after a
	nfo upload.
	Default: "/bin/psxc-imdb.sh"

nocheck_dirs <PATHS>
	Normally dirs in group/zip/sfv dirs are checked for corruption and
	completeness. The dirs listed in this varaible will override paths
	inside the previous dirs, and not check the files uploaded.
	Unlike the original zipscript-c, pzs-ng will only check dirs listed
	in group/zip/sfv dirs, and not the entire site. Dirs are separated
	by a space character.
	Default: "/site/private/"

noforce_sfv_first_dirs <PATHS>
	The option 'force_sfv_first' forces sfv to be uploaded first in a
	release. In some dirs, this may not be desiarable. To the rescue come
	this option, which allow you to enter dirs that will be excluded from
	the force.
	Default: "/site/incoming/requests/"

other_completebar <STRING|DISABLED>
	When a release is complete, a 'complete bar' will be created. Define
	here how it should look like on other releases. If you want multiple
	completebars _per release_, separate them with "\n" (Like "foo\nbar").
	Default: "[%Z] - ( %.0mM %fF - COMPLETE ) - [%Z]"

program_gid <NUMBER>
	Same as with program_uid, only this is with the group.
	Default: 0

program_uid <NUMBER>
	Some may want to run zipscript-c as a special user, which will be
	set as 'owner' of links, missing files etc. Setting this to anything
	but 0 will force the zipscript to change uid to the number you put
	here. In order for this to work, zipscript-c needs the suid bit set.
	Default: 0

progressmeter <STRING>
	On upload a complete-bar is created after each file, to show how
	complete the release is. Put here how that indicator will look.
	Default: "[%V] - %3.0p%% Complete - [%Z]"

progressmeter_audio <STRING>
	On upload a complete-bar is created after each file, to show how
	complete the release is. Put here how that indicator will look.
	This is for audio releases only.
	Default: "[%V] - %3.0p%% Complete - (%w) [%Z]"

rar_completebar <STRING|DISABLED>
	When a release is complete, a 'complete bar' will be created. Define
	here how it should look like on rar releases. If you want multiple
	completebars _per release_, separate them with "\n" (Like "foo\nbar").
	Default: "[%Z] - ( %.0mM %fF - COMPLETE ) - [%Z]"

realtime_group_body <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, body of
	group-stats.
	Default: "| %2n. %-15g %8.1mMB %4fF %7.0skB/s |\n"

realtime_group_footer <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, footer of
	group-stats.
	Default: ""

realtime_group_header <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, head of
	group-stats.
	Default: "+-=[GroupTop]=--------------------===--------------+\n"

realtime_audio_info <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message on audiofiles
	upload.
	Default: "+-=[ID3tag]=------------------------===------------+\n| Title  : %-39y |\n| Artist : %-39x |\n| Album  : %-39W |\n| Genre  : %-39w |\n| Year   : %-39Y |\n"

realtime_user_body <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, body of
	user-stats.
	Default: "| %2n. %-15u %8.1mMB %4fF %7.0skB/s |\n"

realtime_user_footer <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, footer of
	user-stats.
	Default: ""

realtime_user_header <STRING|DISABLED>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the body of that message, head of
	user-stats.
	Default: "+-=[UserTop]=-------------------===----------------+\n"

remove_dot_debug_on_delete <TRUE|FALSE>
	If you have debug mode on, users may or may not be able to see the
	hidden files in the dir, and glftpd may be set up to deny the user
	to delete other people's files (the .debug may be owned by a different
	racer). Setting this to TRUE will try to remove the .debug file if
	the dir itself is removed. Previously, people had to have access to
	the wipe-command to be able to do this.
	Related option(s): remove_dot_files_on_delete
	Default: TRUE

remove_dot_files_on_delete <TRUE|FALSE>
	If your site hides hidden files (files starting with a dot (''.''),
	your users may have problems deleting dirs completely. Setting this
	option to TRUE will remove all hidden files, when all other files of
	the release is deleted.
	Related option(s): remove_dot_debug_on_delete
	Default: FALSE

rescan_chdir_flags <STRING>
	The rescan binary can chdir() to a specified dir before starting the
	rescan. List here the flags needed by the user to be allowed to use this
	option, for instance "17ABC".
	Please note that root (uid 0) are allowed as well, no matter what flags
	he have or doesn't have. This is to help rescanning from shell.
	Group-dirs cannot be rescanned this way - they'll have to be rescanned
	the 'normal' way.
	Default: ""

rescan_default_to_quick <TRUE|FALSE>
	This option sets the default mode for rescan regarding the quick mode.
	In quick mode only the files not already marked as good will be
	rescanned. This is good if some files are uploaded, but not checked by
	the zipscript.
	Default: TRUE

rescan_nocheck_dirs_allowed <TRUE|FALSE>
	If you need to check a dir placed in a nocheck_dirs area, you must
	set this variable to TRUE. Setting this to FALSE will render the rescan
	option dead in nocheck_dirs areas.
	Default: TRUE

rescan_script <PATH>
	Put here the path to the external script which should be run on rescan
	if the release is complete.
	Note that this option is not valid on zip releases.
	Default: "/bin/rescan_script.sh"

sample_list <STRING>
	This is a comma-seperated list of sample-dirs. The list is not case-sensitive.
	Default: "sample,vobsample"

sample_script <PATH>
	Enter the name of the script you wish to execute on sample uploads.
	Default: "/bin/sample_script.sh"

sample_types <STRING>
	Comma-separated list of file extensions considered to be sample files.
	Default: "mpg,mpeg,m2v,m2p,avi,mkv,mov,mp4,wmv,vob,ts,jpg,jpeg,png"

sfv_calc_single_fname <TRUE|FALSE>
	Setting this to TRUE enables the zipscript to calculate a crc checksum
	for filenames listed in the sfv, which do not have a corresponding crc.
	Normally only broken sfv's should have a missing crc after a filename.
	Default: FALSE

sfv_cleanup <TRUE|FALSE>
	Setting this to TRUE will remove heading and trailing whitespace and
	enable cleanup of the uploaded sfv depending on which related options
	are set to TRUE.
	Related option(s): sfv_dupecheck sfv_cleanup_lowercase sfv_cleanup_crlf
	                   sfv_lenient deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

sfv_cleanup_comments <TRUE|FALSE>
	Setting this to true will cleanup the uploaded sfv by removing comments.
	Comments are all lines containing ';'.
	Related option(s): sfv_dupecheck sfv_cleanup_lowercase sfv_cleanup_crlf
	                   sfv_lenient deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup
	Default: TRUE

sfv_cleanup_crlf <TRUE|FALSE>
	If sfv_cleanup is set to TRUE, this option defines if you use windows
	or *nix version of linefeeds. The recommended option is to leave this
	to TRUE, using windows style (<cr><lf>).
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_lowercase
	                   sfv_lenient deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

sfv_cleanup_lowercase <TRUE|FALSE>
	If sfv_cleanup is set to TRUE, this setting will also convert all
	entries in the sfv to lowercase.
	If sfv_cleanup is set to FALSE, this setting will only make -missing
	pointers and the internal sfv database lowercased.
	Either way, if set to TRUE you in effect turn winblows mode on, and the
	zipscript will not separate case on filenames.
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_crlf
	                   sfv_lenient deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

sfv_dirs <PATHS>
	Similar to zip_dirs, this holds a list of dirs you expect to get sfv-
	releases. Typical releases that use sfv is anything that is not zipped,
	like rar, mp3, avi etc. Dirs listed here will be logged. Dirs are
	separated by a space character.
	Default: "/site/test/ /site/incoming/mp3/ /site/incoming/games/ /site/incoming/apps/ /site/incoming/musicvideos/ /site/incoming/requests/"

sfv_dupecheck <TRUE|FALSE>
	Setting this option to TRUE will remove duplicate entries within the
	uploaded sfv file.
	Related option(s): sfv_cleanup sfv_cleanup_lowercase sfv_cleanup_crlf
	                   sfv_lenient deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

sfv_lenient <TRUE|FALSE>
	If this is set to true, the chars '_' , '-' , '.' , ' ' and ',' are
	recognized as the same char. Ie, if you have in sfv 'file.name' and
	upload 'file_name' - the file will be allowed.
	Related option(s): sfv_dupecheck sfv_cleanup sfv_cleanup_lowercase
	                   sfv_cleanup_crlf deny_double_sfv deny_resume_sfv
	                   allow_slash_in_sfv sfv_cleanup_comments
	Default: TRUE

short_sitename <STRING>
	Insert here the name of your site, short format. This will be used on
	progressbars, completebars etc. This can be used in a cookie (%Z).
	Default: "NG"

show_group_info <TRUE|FALSE>
	If you wish to print stat info after a file is uploaded to the racer,
	set this to true. It will display racers (groupnames) and stats on the
	current race in the client's ftp program.
	Default: TRUE

show_stats_from_pos2_only <TRUE|FALSE>
	If this is set to true, only racers in position 2 and below is shown
	in the %T and %t cookies - this affects the LOOP variables in the bot.
	Default: FALSE

show_user_info <TRUE|FALSE>
	If you wish to print stat info after a file is uploaded to the racer,
	set this to true. It will display racers (usernames) and stats on the
	current race in the client's ftp program.
	Default: TRUE

show_users_in_group_dirs <TRUE|FALSE>
	Setting this to TRUE will disable the hiding of usernames. This
	option is discouraged.
	Default: FALSE

sitepath_dir <PATH>
	This is used as a base for datacleaner, when it's run as a cscript.
	It is normally set to /site/, which is the common location in which all
	your site's public dirs reside.
	Default: "/site/"

sleep_on_bad <NUMBER>
	Whenever a bad file is encountered, you can add a delay for the user
	between 1 and 1000 seconds. Put the number of seconds glftpd should
	sleep. Setting this to 0 ( or >1000) will disable this feature.
	Default: 0

spaces_to_dots <TRUE|FALSE>
	This option will replace spaces in audio-genre dirs to dots.
	Default: FALSE

speedtest_delfile <TRUE|FALSE>
	With speedtest you can choose if you wish to keep the uploaded files or
	remove them immediatly. If you choose to keep them, the files will be
	renamed to xx.xMiB
	Default: FALSE

speedtest_dirs <PATHS>
	On sites it is common with special dirs dedicated to speedtesting. You
	can define here the dirs dedicated to speedtesting.
	Default: "/site/speedtest/"

status_bar_type <BAR_FILE|BAR_DIR|BAR_OFF>
	In each dir there will be a statusbar. Here you define if you wish
	to make it as a file (BAR_FILE) or as a dir (BAR_DIR). To disable use
	BAR_OFF.
	Default: BAR_DIR

storage <PATH>
	This is the place where the zipscript keeps a 'mirror' of your site's
	setup. Here stats for racers and releases are stored. This storage
	should not be accessible to your site's users, but must be world
	read/writable (+rwx).
	Default: "/ftp-data/pzs-ng/"

strict_path_match <TRUE|FALSE>
	This setting is used to enforce the filetype (zip/sfv) based on path.
	When set to TRUE, zip files is not allowed in sfv dirs, and the other
	way around. group dirs are not affected, as they can be both.
	Default: FALSE

strict_sfv_check <TRUE|FALSE>
	Whenever "bad" entries are found in the sfv, they are usually ignored.
	Setting this settingto true will mark the entire sfv as bad if such
	entries are found, forcing the user to upload a valid sfv file.
	Bad entries consist of lines containing the NULL char, or lines without
	a valid crc code.
	Default: FALSE

subdir_list <STRING>
	This is a list of what is defined as subdirs. Dirs matching these
	patterns will be considered subdirs, and follow a different pattern
	regarding symlinks and nfo-rules etc.
	Put the char '?' where a number or char may or may not be, but *only*
	at the end of a dirname. Ie, cd?? will match cdA, cd12, but not cd123.
	Do not put '?' at the beginning or in the middle - it will not work.
	The string is not case-sensitive (dVd == DvD).
	Default: "cd??,disc??,disk??,dvd??,extra?,sub?,subtitle?,vobsub?,sample?,subpack?,ac3,audioaddon,addon,ac3addon,proof,cover?"

test_for_password <TRUE|FALSE>
	Some rarfiles have password protection. If you wish to check for such
	files, set this to TRUE.
	Default: TRUE

unduper_script <PATH>
	Enter the name of the script doing the actual unduping of the file.
	Default: "/bin/ng-undupe"

unzip_bin <PATH>
	This is the location of the unzip binary needed to verify zip-releases.
	Default: "/bin/unzip"

use_group_dirs_as_affil_list <TRUE|FALSE>
	Use the group_dirs as base for getting the list of affils to hide.
	Default: FALSE

use_partial_on_noforce <TRUE|FALSE>
	Usually all pathmatches are full paths. You can change this on what
	you put in noforce_sfv_first_dirs to make it match parts of a dir,
	like 'sample' or something. Please be careful to include a slash after
	the dirs if this setting is on - like '/sample/', to minimize the
	number of possible wrong hits.
	Default: FALSE

userellink <TRUE|FALSE>
	With symbolic links you have an option of it being absolute (FALSE) or
	relative (TRUE).
	Default: TRUE

video_completebar <STRING|DISABLED>
	When a release is complete, a 'complete bar' will be created. Define
	here how it should look like on video releases. If you want multiple
	completebars _per release_, separate them with "\n" (Like "foo\nbar").
	Default: "[%Z] - ( %.0mM %fF - COMPLETE ) - [%Z]"

video_types <STRING>
	Comma-separated list of files considered to be video files. Should
	usually not be changed, but may need to be if a 3rd party script handle
	sample info.
	Default: "mpg,mpeg,m2v,m2p,avi,mkv,mov,mp4,wmv,vob,ts"

write_complete_message <TRUE|FALSE>
	Should a file be created in the releasedir, containing race-info etc?
	Default: TRUE

write_complete_message_in_group_dirs <TRUE|FALSE>
	Should a .message file be created in the group-dirs?
	Default: TRUE

zip_bin <PATH>
	This is the location of the zip binary needed to clean zip-releases for
	unwanted files.
	Default: "/bin/zip"

zip_clean <TRUE|FALSE>
	If you wish to clean zipfiles (remove files based on the list given in
	banned_filelist), set this to TRUE.
	Default: TRUE

zip_completebar <STRING|DISABLED>
	When a release is complete, a 'complete bar' will be created. Define
	here how it should look like on zip releases. If you want multiple
	completebars _per release_, separate them with "\n" (Like "foo\nbar").
	Default: "[%Z] - ( %.0mM %fF - COMPLETE ) - [%Z]"

zip_dirs <PATHS>
	This variable should hold a list of dirs where you expect zip-releases.
	Dirs listed here will be logged. Dirs are separated by a space
	character.
	Default: "/site/test/ /site/incoming/0day/"

zipscript_SFV_ok <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message on sfv-
	checked file.
	Default: "| + CRC-Check: oK!                                 |\n"

zipscript_SFV_skip <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message when sfv
	has not yet been uploaded.
	Default: "| + CRC-Check: SKIPPED!                            |\n"

zipscript_any_ok <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message on any ok
	file.
	Default: "| + File: ok! (allowed w/o any checks)             |\n"

zipscript_footer_error <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the footer of that message, on uploads
	where the file has error.
	Default: "| - %-46v |\n`-----------------------------------========-------'\n"

zipscript_footer_ok <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the footer of that message, on uploads
	where the file is verified ok.
	Default: "`-[%V]----------------------[%3F/%-3f]--'\n"

zipscript_footer_skip <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the footer of that message, on uploads
	where the file has skipped checking.
	Default: "`--------------------------------=====-------------'\n"

zipscript_footer_unknown <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown in the footer of that message, on uploads
	where no sfv is uploaded yet.
	Default: "`-[ - NO - SFV - ]----------------------[%3F/???]--'\n"

zipscript_header <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the head of that message.
	Default: ".-== PZS-NG Zipscript-C ==-------------------------.\n"

zipscript_sfv_ok <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message on sfv-file-
	upload.
	Default: "| + SFV-file: oK!                                  |\n"

zipscript_zip_ok <STRING>
	When files are uploaded, some output is shown to the racer uploading.
	Put here what should be shown as the body of that message on zipfile
	upload.
	Default: "| + ZiP integrity: oK!                             |\n"

zsinternal_checks_completed <STRING>
	Output in benchmark mode.
	In default value, %0.6f = six digits number of seconds.
	Default: "Checks completed in %0.6f seconds.\n"