ppu.rs

//
// sprocketnes/ppu.rs
//
// Author: Patrick Walton
//

use mapper::{Irq, Mapper};
use mem::Mem;
use util::{Fd, Save, debug_assert};

use std::cast::transmute;
use std::libc::c_void;

//
// Constants
//

pub static SCREEN_WIDTH: uint = 256;
pub static SCREEN_HEIGHT: uint = 240;
pub static CYCLES_PER_SCANLINE: u64 = 114;   // 29781 cycles per frame, 261 scanlines
pub static VBLANK_SCANLINE: uint = 241;
pub static LAST_SCANLINE: uint = 261;

static PALETTE: [u8, ..192] = [
    124,124,124,    0,0,252,        0,0,188,        68,40,188,
    148,0,132,      168,0,32,       168,16,0,       136,20,0,
    80,48,0,        0,120,0,        0,104,0,        0,88,0,
    0,64,88,        0,0,0,          0,0,0,          0,0,0,
    188,188,188,    0,120,248,      0,88,248,       104,68,252,
    216,0,204,      228,0,88,       248,56,0,       228,92,16,
    172,124,0,      0,184,0,        0,168,0,        0,168,68,
    0,136,136,      0,0,0,          0,0,0,          0,0,0,
    248,248,248,    60,188,252,     104,136,252,    152,120,248,
    248,120,248,    248,88,152,     248,120,88,     252,160,68,
    248,184,0,      184,248,24,     88,216,84,      88,248,152,
    0,232,216,      120,120,120,    0,0,0,          0,0,0,
    252,252,252,    164,228,252,    184,184,248,    216,184,248,
    248,184,248,    248,164,192,    240,208,176,    252,224,168,
    248,216,120,    216,248,120,    184,248,184,    184,248,216,
    0,252,252,      248,216,248,    0,0,0,          0,0,0
];

//
// Registers
//

struct Regs {
    ctrl: PpuCtrl,      // PPUCTRL: 0x2000
    mask: PpuMask,      // PPUMASK: 0x2001
    status: PpuStatus,  // PPUSTATUS: 0x2002
    oam_addr: u8,       // OAMADDR: 0x2003
    scroll: PpuScroll,  // PPUSCROLL: 0x2005
    addr: PpuAddr,      // PPUADDR: 0x2006
}

save_struct!(Regs { ctrl, mask, status, oam_addr, scroll, addr })

//
// PPUCTRL: 0x2000
//

struct PpuCtrl(u8);

enum SpriteSize {
    SpriteSize8x8,
    SpriteSize8x16
}

impl PpuCtrl {
    fn x_scroll_offset(self) -> u16               { if (*self & 0x01) == 0 { 0 } else { 256 } }
    fn y_scroll_offset(self) -> u16               { if (*self & 0x02) == 0 { 0 } else { 240 } }
    fn vram_addr_increment(self) -> u16           { if (*self & 0x04) == 0 { 1 } else { 32 } }
    fn sprite_pattern_table_addr(self) -> u16     { if (*self & 0x08) == 0 { 0 } else { 0x1000 } }
    fn background_pattern_table_addr(self) -> u16 { if (*self & 0x10) == 0 { 0 } else { 0x1000 } }
    fn sprite_size(self) -> SpriteSize {
        if (*self & 0x20) == 0 { SpriteSize8x8 } else { SpriteSize8x16 }
    }
    fn vblank_nmi(self) -> bool                   { (*self & 0x80) != 0 }
}

//
// PPUMASK: 0x2001
//

struct PpuMask(u8);

impl PpuMask {
    fn grayscale(self) -> bool               { (*self & 0x01) != 0 }
    fn show_background_on_left(self) -> bool { (*self & 0x02) != 0 }
    fn show_sprites_on_left(self) -> bool    { (*self & 0x04) != 0 }
    fn show_background(self) -> bool         { (*self & 0x08) != 0 }
    fn show_sprites(self) -> bool            { (*self & 0x10) != 0 }
    fn intensify_reds(self) -> bool          { (*self & 0x20) != 0 }
    fn intensify_greens(self) -> bool        { (*self & 0x40) != 0 }
    fn intensity_blues(self) -> bool         { (*self & 0x80) != 0 }
}

//
// PPUSTATUS: 0x2002
//

struct PpuStatus(u8);

impl PpuStatus {
    // TODO: open bus junk in bits [0,5)
    fn set_sprite_overflow(&mut self, val: bool) {
        if val { *self = PpuStatus(**self | 0x20) } else { *self = PpuStatus(**self & !0x20) }
    }
    fn set_sprite_zero_hit(&mut self, val: bool) {
        if val { *self = PpuStatus(**self | 0x40) } else { *self = PpuStatus(**self & !0x40) }
    }
    fn set_in_vblank(&mut self, val: bool) {
        if val { *self = PpuStatus(**self | 0x80) } else { *self = PpuStatus(**self & !0x80) }
    }
}

//
// PPUSCROLL: 0x2005
//

struct PpuScroll {
    x: u8,
    y: u8,
    next: PpuScrollDir
}

save_struct!(PpuScroll { x, y, next })

enum PpuScrollDir {
    XDir,
    YDir,
}

save_enum!(PpuScrollDir { XDir, YDir })

//
// PPUADDR: 0x2006
//

struct PpuAddr {
    val: u16,
    next: PpuAddrByte
}

save_struct!(PpuAddr { val, next })

enum PpuAddrByte {
    Hi,
    Lo,
}

save_enum!(PpuAddrByte { Hi, Lo })

// PPU VRAM. This implements the same Mem trait that the CPU memory does.

pub struct Vram {
    mapper: (*c_void, *c_void),
    nametables: [u8, ..0x800],  // 2 nametables, 0x400 each. FIXME: Not correct for all mappers.
    palette: [u8, ..0x20],
}

impl Vram {
    pub fn new(mapper: &Mapper) -> Vram {
        // FIXME: Need to fix &mut self notational problem to eliminate this unsafeness.
        unsafe {
            Vram {
                mapper: transmute(mapper),
                nametables: [ 0, ..0x800 ],
                palette: [ 0, ..0x20 ]
            }
        }
    }
}

impl Mem for Vram {
    #[inline(always)]
    fn loadb(&mut self, addr: u16) -> u8 {
        if addr < 0x2000 {          // Tilesets 0 or 1
            unsafe {
                let mut mapper: &Mapper = transmute(self.mapper);
                mapper.chr_loadb(addr)
            }
        } else if addr < 0x3f00 {   // Name table area
            self.nametables[addr & 0x07ff]
        } else if addr < 0x4000 {   // Palette area
            self.palette[addr & 0x1f]
        } else {
            fail!(~"invalid VRAM read")
        }
    }
    fn storeb(&mut self, addr: u16, val: u8) {
        if addr < 0x2000 {
            unsafe {
                let mut mapper: &Mapper = transmute(self.mapper);
                mapper.chr_storeb(addr, val)
            }
        } else if addr < 0x3f00 {           // Name table area
            let addr = addr & 0x07ff;
            self.nametables[addr] = val;
        } else if addr < 0x4000 {   // Palette area
            let mut addr = addr & 0x1f;
            if addr == 0x10 {
                addr = 0x00;    // Mirror sprite background color into universal background color.
            }
            self.palette[addr] = val;
        }
    }
}

impl Save for Vram {
    fn save(&mut self, fd: &Fd) {
        let mut nametables: &mut [u8] = self.nametables; nametables.save(fd);
        let mut palette: &mut [u8] = self.palette; palette.save(fd);
    }
    fn load(&mut self, fd: &Fd) {
        let mut nametables: &mut [u8] = self.nametables; nametables.load(fd);
        let mut palette: &mut [u8] = self.palette; palette.load(fd);
    }
}

//
// Object Attribute Memory (OAM)
//

pub struct Oam {
    oam: [u8, ..0x100]
}

impl Oam {
    pub fn new() -> Oam {
        Oam { oam: [ 0, ..0x100 ] }
    }
}

impl Mem for Oam {
    fn loadb(&mut self, addr: u16) -> u8     { self.oam[addr] }
    fn storeb(&mut self, addr: u16, val: u8) { self.oam[addr] = val }
}

impl Save for Oam {
    fn save(&mut self, fd: &Fd) { let mut oam: &mut [u8] = self.oam; oam.save(fd); }
    fn load(&mut self, fd: &Fd) { let mut oam: &mut [u8] = self.oam; oam.load(fd); }
}

struct Sprite {
    x: u8,
    y: u8,
    tile_index_byte: u8,
    attribute_byte: u8,
}

// Specifies the indices of the tiles that make up this sprite.
enum SpriteTiles {
    SpriteTiles8x8(u16),
    SpriteTiles8x16(u16, u16)
}

impl Sprite {
    fn tiles(&self, ppu: &Ppu) -> SpriteTiles {
        let base = ppu.regs.ctrl.sprite_pattern_table_addr();
        match ppu.regs.ctrl.sprite_size() {
            SpriteSize8x8 => SpriteTiles8x8(self.tile_index_byte as u16 | base),
            SpriteSize8x16 => {
                // We ignore the base set in PPUCTRL here.
                let mut first = (self.tile_index_byte & !1) as u16;
                if (self.tile_index_byte & 1) != 0 {
                    first += 0x1000;
                }
                SpriteTiles8x16(first, first + 1)
            }
        }
    }

    fn palette(&self) -> u8                 { (self.attribute_byte & 3) + 4 }
    fn flip_horizontal(&self) -> bool       { (self.attribute_byte & 0x40) != 0 }
    fn flip_vertical(&self) -> bool         { (self.attribute_byte & 0x80) != 0 }

    fn priority(&self) -> SpritePriority {
        if (self.attribute_byte & 0x20) == 0 { AboveBg } else { BelowBg }
    }

    // Quick test to see whether this sprite is on the given scanline.
    fn on_scanline(&self, ppu: &Ppu, y: u8) -> bool {
        if y < self.y { return false; }
        match ppu.regs.ctrl.sprite_size() {
            SpriteSize8x8 => y < self.y + 8,
            SpriteSize8x16 => y < self.y + 16
        }
    }

    // Quick test to see whether the given point is in the bounding box of this sprite.
    fn in_bounding_box(&self, ppu: &Ppu, x: u8, y: u8) -> bool {
        x >= self.x && x < self.x + 8 && self.on_scanline(ppu, y)
    }
}

// The main PPU structure. This structure is separate from the PPU memory just as the CPU is.

pub struct Ppu {
    regs: Regs,
    vram: Vram,
    oam: Oam,

    screen: ~([u8, ..184320]),  // 256 * 240 * 3
    scanline: u16,
    ppudata_buffer: u8,

    // NB: These two cannot always be computed from PPUCTRL and PPUSCROLL, because PPUADDR *also*
    // updates the scroll position. This is important to emulate.
    scroll_x: u16,
    scroll_y: u16,

    cy: u64
}

impl Mem for Ppu {
    // Performs a load of the PPU register at the given CPU address.
    fn loadb(&mut self, addr: u16) -> u8 {
        debug_assert(addr >= 0x2000 && addr < 0x4000, "invalid PPU register");
        match addr & 7 {
            0 => *self.regs.ctrl,
            1 => *self.regs.mask,
            2 => self.read_ppustatus(),
            3 => 0, // OAMADDR is read-only
            4 => fail!(~"OAM read unimplemented"),
            5 => 0, // PPUSCROLL is read-only
            6 => 0, // PPUADDR is read-only
            7 => self.read_ppudata(),
            _ => fail!(~"can't happen")
        }
    }

    // Performs a store to the PPU register at the given CPU address.
    fn storeb(&mut self, addr: u16, val: u8) {
        debug_assert(addr >= 0x2000 && addr < 0x4000, "invalid PPU register");
        match addr & 7 {
            0 => self.update_ppuctrl(val),
            1 => self.regs.mask = PpuMask(val),
            2 => (),    // PPUSTATUS is read-only
            3 => self.regs.oam_addr = val,
            4 => self.write_oamdata(val),
            5 => self.update_ppuscroll(val),
            6 => self.update_ppuaddr(val),
            7 => self.write_ppudata(val),
            _ => fail!(~"can't happen")
        }
    }
}

#[deriving(Eq)]
pub struct StepResult {
    new_frame: bool,    // We wrapped around to the next scanline.
    vblank_nmi: bool,   // We entered VBLANK and must generate an NMI.
    scanline_irq: bool, // The mapper wants to execute a scanline IRQ.
}

struct Rgb {
    r: u8,
    g: u8,
    b: u8,
}

enum PatternPixelKind {
    Background,
    Sprite,
}

struct NametableAddr {
    base: u16,
    x_index: u8,
    y_index: u8,
}

struct SpriteColor {
    priority: SpritePriority,
    color: Rgb,
}

enum SpritePriority {
    AboveBg,
    BelowBg,
}

impl Save for Ppu {
    fn save(&mut self, fd: &Fd) {
        self.regs.save(fd);
        self.vram.save(fd);
        self.oam.save(fd);
        self.scanline.save(fd);
        self.ppudata_buffer.save(fd);
        self.scroll_x.save(fd);
        self.scroll_y.save(fd);
        self.cy.save(fd);
    }
    fn load(&mut self, fd: &Fd) {
        self.regs.load(fd);
        self.vram.load(fd);
        self.oam.load(fd);
        self.scanline.load(fd);
        self.ppudata_buffer.load(fd);
        self.scroll_x.load(fd);
        self.scroll_y.load(fd);
        self.cy.load(fd);
    }
}

impl Ppu {
    pub fn new(vram: Vram, oam: Oam) -> Ppu {
        Ppu {
            regs: Regs {
                ctrl: PpuCtrl(0),
                mask: PpuMask(0),
                status: PpuStatus(0),
                oam_addr: 0,
                scroll: PpuScroll { x: 0, y: 0, next: XDir },
                addr: PpuAddr { val: 0, next: Hi },
            },
            vram: vram,
            oam: oam,

            screen: ~([ 0, ..184320 ]),
            scanline: 0,
            ppudata_buffer: 0,

            scroll_x: 0,
            scroll_y: 0,

            cy: 0
        }
    }

    //
    // Color utilities
    //

    #[inline(always)]
    fn get_color(&self, palette_index: u8) -> Rgb {
        Rgb {
            r: PALETTE[palette_index * 3 + 2],
            g: PALETTE[palette_index * 3 + 1],
            b: PALETTE[palette_index * 3 + 0],
        }
    }

    //
    // Register manipulation
    //

    fn update_ppuctrl(&mut self, val: u8) {
        self.regs.ctrl = PpuCtrl(val);

        self.scroll_x = (self.scroll_x & 0xff) | self.regs.ctrl.x_scroll_offset();
        self.scroll_y = (self.scroll_y & 0xff) | self.regs.ctrl.y_scroll_offset();
    }

    fn update_ppuscroll(&mut self, val: u8) {
        match self.regs.scroll.next {
            XDir => {
                self.scroll_x = (self.scroll_x & 0xff00) | (val as u16);

                self.regs.scroll.x = val;
                self.regs.scroll.next = YDir;
            }
            YDir => {
                self.scroll_y = (self.scroll_y & 0xff00) | (val as u16);

                self.regs.scroll.y = val;
                self.regs.scroll.next = XDir;
            }
        }
    }

    fn write_oamdata(&mut self, val: u8) {
        self.oam.storeb(self.regs.oam_addr as u16, val);
        self.regs.oam_addr += 1;
    }

    fn update_ppuaddr(&mut self, val: u8) {
        match self.regs.addr.next {
            Hi => {
                self.regs.addr.val = (self.regs.addr.val & 0x00ff) | ((val as u16) << 8);
                self.regs.addr.next = Lo;
            }
            Lo => {
                self.regs.addr.val = (self.regs.addr.val & 0xff00) | (val as u16);
                self.regs.addr.next = Hi;

                // Adjust the scroll registers.
                // TODO: This is pretty much a hack. The right way is to precisely emulate the PPU
                // internal registers.
                // TODO: Y scrolling.
                let addr = self.regs.addr.val & 0x07ff;
                let xscroll_base = if addr < 0x400 { 0 } else { 256 };
                self.scroll_x = (self.scroll_x & 0xff) | xscroll_base;
            }
        }
    }

    fn read_ppustatus(&mut self) -> u8 {
        // Reset latch.
        self.regs.scroll.next = XDir;
        self.regs.addr.next = Hi;

        *self.regs.status
    }

    fn write_ppudata(&mut self, val: u8) {
        self.vram.storeb(self.regs.addr.val, val);
        self.regs.addr.val += self.regs.ctrl.vram_addr_increment();
    }

    fn read_ppudata(&mut self) -> u8 {
        let addr = self.regs.addr.val;
        let val = self.vram.loadb(addr);
        self.regs.addr.val += self.regs.ctrl.vram_addr_increment();

        // Emulate the PPU buffering quirk.
        if addr < 0x3f00 {
            let buffered_val = self.ppudata_buffer;
            self.ppudata_buffer = val;
            buffered_val
        } else {
            val
        }
    }

    //
    // Background rendering helpers
    //

    fn nametable_addr(&mut self, mut x_index: u16, mut y_index: u16) -> NametableAddr {
        x_index %= 64;
        y_index %= 60;

        let nametable_base = match (x_index >= 32, y_index >= 30) {
            (false, false)  => 0x2000,
            (true, false)   => 0x2400,
            (false, true)   => 0x2800,
            (true, true)    => 0x2c00,
        };

        NametableAddr {
            base: nametable_base,
            x_index: (x_index % 32) as u8,
            y_index: (y_index % 30) as u8
        }
    }

    #[inline(always)]
    fn make_sprite_info(&mut self, index: u16) -> Sprite {
        Sprite {
            y: self.oam.loadb(index * 4 + 0) + 1,
            tile_index_byte: self.oam.loadb(index * 4 + 1),
            attribute_byte: self.oam.loadb(index * 4 + 2),
            x: self.oam.loadb(index * 4 + 3),
        }
    }

    #[inline(always)]
    fn each_sprite(&mut self, f: &fn(&mut Ppu, &Sprite, u8) -> bool) {
        for i in range(0, 64) {
            let sprite = self.make_sprite_info(i as u16);
            if !f(self, &sprite, i as u8) {
                return
            }
        }
    }

    //
    // Rendering
    //

    #[inline(always)]
    fn putpixel(&mut self, x: uint, y: uint, color: Rgb) {
        self.screen[(y * SCREEN_WIDTH + x) * 3 + 0] = color.r;
        self.screen[(y * SCREEN_WIDTH + x) * 3 + 1] = color.g;
        self.screen[(y * SCREEN_WIDTH + x) * 3 + 2] = color.b;
    }

    // Returns the color (pre-palette lookup) of pixel (x,y) within the given tile.
    #[inline(always)]
    fn get_pattern_pixel(&mut self, kind: PatternPixelKind, tile: u16, x: u8, y: u8) -> u8 {
        // Compute the pattern offset.
        let mut pattern_offset = (tile << 4) + (y as u16);
        match kind {
            Background => pattern_offset += self.regs.ctrl.background_pattern_table_addr(),
            Sprite     => pattern_offset += self.regs.ctrl.sprite_pattern_table_addr(),
        }

        // Determine the color of this pixel.
        let plane0 = self.vram.loadb(pattern_offset);
        let plane1 = self.vram.loadb(pattern_offset + 8);
        let bit0 = (plane0 >> (7 - ((x % 8) as u8))) & 1;
        let bit1 = (plane1 >> (7 - ((x % 8) as u8))) & 1;
        (bit1 << 1) | bit0
    }

    // Returns true if the background was opaque here, false otherwise.
    #[inline(always)]
    fn get_background_pixel(&mut self, x: u8) -> Option<Rgb> {
        // Adjust X and Y to account for scrolling.
        let x = x as u16 + self.scroll_x;
        let y = self.scanline as u16 + self.scroll_y;

        // Compute the nametable address, tile index, and pixel offset within that tile.
        let NametableAddr { base, x_index, y_index } = self.nametable_addr(x / 8, y / 8);
        let (xsub, ysub) = ((x % 8) as u8, (y % 8) as u8);

        // Compute the nametable address and load the tile number from the nametable.
        let tile = self.vram.loadb(base + 32 * (y_index as u16) + (x_index as u16));

        // Fetch the pattern color.
        let pattern_color = self.get_pattern_pixel(Background, tile as u16, xsub, ysub);
        if pattern_color == 0 {
            return None;    // Transparent.
        }

        // Now load the attribute bits from the attribute table.
        let group = y_index / 4 * 8 + x_index / 4;
        let attr_byte = self.vram.loadb(base + 0x3c0 + (group as u16));
        let (left, top) = (x_index % 4 < 2, y_index % 4 < 2);
        let attr_table_color = match (left, top) {
            (true, true) => attr_byte & 0x3,
            (false, true) => (attr_byte >> 2) & 0x3,
            (true, false) => (attr_byte >> 4) & 0x3,
            (false, false) => (attr_byte >> 6) & 0x3
        };

        // Determine the final color and fetch the palette from VRAM.
        let tile_color = (attr_table_color << 2) | pattern_color;
        let palette_index = self.vram.loadb(0x3f00 + (tile_color as u16)) & 0x3f;
        return Some(self.get_color(palette_index));
    }

    fn get_sprite_pixel(&mut self,
                        visible_sprites: &[Option<u8>, ..8],
                        x: u8,
                        background_opaque: bool)
                     -> Option<SpriteColor> {
        for &visible_sprite_opt in visible_sprites.iter() {
            match visible_sprite_opt {
                None => return None,
                Some(index) => {
                    let sprite = self.make_sprite_info(index as u16);

                    // Don't need to consider this sprite if we aren't in its bounding box.
                    if !sprite.in_bounding_box(self, x as u8, self.scanline as u8) {
                        loop;
                    }

                    let pattern_color;
                    match sprite.tiles(self) {
                        // TODO: 8x16 rendering
                        SpriteTiles8x8(tile) | SpriteTiles8x16(tile, _) => {
                            let mut x = x - sprite.x;
                            if sprite.flip_horizontal() { x = 7 - x; }

                            let mut y = self.scanline as u8 - sprite.y;
                            if sprite.flip_vertical() { y = 7 - y; }

                            debug_assert(x < 8, "sprite X miscalculation");
                            debug_assert(y < 8, "sprite Y miscalculation");

                            pattern_color = self.get_pattern_pixel(Sprite, tile, x, y);
                        }
                    }

                    // If the pattern color was zero, this part of the sprite is transparent.
                    if pattern_color == 0 {
                        loop;
                    }

                    // OK, so we know this pixel is opaque. Now if this is the first sprite and the
                    // background was not transparent, set sprite 0 hit.
                    if index == 0 && background_opaque {
                        self.regs.status.set_sprite_zero_hit(true);
                    }

                    // Determine final tile color and do the palette lookup.
                    let tile_color = (sprite.palette() << 2) | pattern_color;
                    let palette_index = self.vram.loadb(0x3f00 + (tile_color as u16)) & 0x3f;
                    let final_color = self.get_color(palette_index);

                    return Some(SpriteColor { priority: sprite.priority(), color: final_color });
                }
            }
        }
        return None;
    }

    fn compute_visible_sprites(&mut self) -> [Option<u8>, ..8] {
        let mut count = 0;
        let mut result = [None, ..8];
        do self.each_sprite |this, sprite, index| {
            if sprite.on_scanline(this, this.scanline as u8) {
                if count < 8 {
                    result[count] = Some(index);
                    count += 1;
                    true
                } else {
                    this.regs.status.set_sprite_overflow(true);
                    false
                }
            } else {
                true
            }
        }
        result
    }

    fn render_scanline(&mut self) {
        // TODO: Scrolling, mirroring
        let visible_sprites = self.compute_visible_sprites();

        let backdrop_color_index = self.vram.loadb(0x3f00) & 0x3f;
        let backdrop_color = self.get_color(backdrop_color_index);

        for x in range(0, SCREEN_WIDTH) {
            // FIXME: For performance, we shouldn't be recomputing the tile for every pixel.
            let mut background_color = None;
            if self.regs.mask.show_background() {
                background_color = self.get_background_pixel(x as u8);
            }

            let mut sprite_color = None;
            if self.regs.mask.show_sprites() {
                sprite_color = self.get_sprite_pixel(&visible_sprites,
                                                     x as u8,
                                                     background_color.is_some());
            }

            // Combine colors using priority.
            let color = match (background_color, sprite_color) {
                (None, None) => backdrop_color,
                (Some(color), None) => color,
                (Some(color), Some(SpriteColor { priority: BelowBg, _ })) => color,
                (None, Some(SpriteColor { priority: BelowBg, color: color })) => color,
                (_, Some(SpriteColor { priority: AboveBg, color: color })) => color,
            };

            self.putpixel(x, self.scanline as uint, color);
        }
    }

    fn start_vblank(&mut self, result: &mut StepResult) {
        self.regs.status.set_in_vblank(true);

        // FIXME: Is this correct? Or does it happen on the *next* frame?
        self.regs.status.set_sprite_zero_hit(false);

        if self.regs.ctrl.vblank_nmi() {
            result.vblank_nmi = true;
        }
    }

    #[inline(never)]
    pub fn step(&mut self, run_to_cycle: u64) -> StepResult {
        let mut result = StepResult { new_frame: false, vblank_nmi: false, scanline_irq: false };
        loop {
            let next_scanline_cycle: u64 = self.cy + CYCLES_PER_SCANLINE;
            if next_scanline_cycle > run_to_cycle {
                break;
            }

            if self.scanline < (SCREEN_HEIGHT as u16) {
                self.render_scanline();
            }

            self.scanline += 1;

            unsafe {
                let mut mapper: &Mapper = transmute(self.vram.mapper);
                if mapper.next_scanline() == Irq {
                    result.scanline_irq = true;
                }
            }

            if self.scanline == (VBLANK_SCANLINE as u16) {
                self.start_vblank(&mut result);
            } else if self.scanline == (LAST_SCANLINE as u16) { 
                result.new_frame = true;
                self.scanline = 0;
                self.regs.status.set_in_vblank(false);
            }

            self.cy += CYCLES_PER_SCANLINE;

            debug_assert(self.cy % CYCLES_PER_SCANLINE == 0, "at even scanline cycle");
        }

        return result;
    }
}