postgresql.conf.erb

# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
# "#" anywhere on a line.  The complete list of parameter names and allowed
# values can be found in the PostgreSQL documentation.
#
# The commented-out settings shown in this file represent the default values.
# Re-commenting a setting is NOT sufficient to revert it to the default value;
# you need to reload the server.
#
# This file is read on server startup and when the server receives a SIGHUP
# signal.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload".  Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on".  Some parameters can be changed at run time
# with the "SET" SQL command.
#
# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
#                MB = megabytes                     s   = seconds
#                GB = gigabytes                     min = minutes
#                                                   h   = hours
#                                                   d   = days


#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------

# The default values of these variables are driven from the -D command-line
# option or PGDATA environment variable, represented here as ConfigDir.

data_directory = '<%= node["postgresql"]["data_directory"] %>'   # use data in another directory
          # (change requires restart)
hba_file = '<%= node["postgresql"]["hba_file"] %>' # host-based authentication file
          # (change requires restart)
ident_file = '<%= node["postgresql"]["ident_file"] %>' # ident configuration file
          # (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
external_pid_file = '<%= node["postgresql"]["external_pid_file"] %>'    # write an extra PID file
          # (change requires restart)


#------------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#------------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '<%= node["postgresql"]["listen_addresses"] %>'   # what IP address(es) to listen on;
          # comma-separated list of addresses;
          # defaults to 'localhost', '*' = all
          # (change requires restart)
port = <%= node["postgresql"]["port"] %>       # (change requires restart)
max_connections = <%= node["postgresql"]["max_connections"] %>     # (change requires restart)
# Note:  Increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).
#superuser_reserved_connections = <%= node["postgresql"]["superuser_reserved_connections"] %> # (change requires restart)
unix_socket_directory = '<%= node["postgresql"]["unix_socket_directory"] %>'   # (change requires restart)
#unix_socket_group = '<%= node["postgresql"]["unix_socket_group"] %>'     # (change requires restart)
#unix_socket_permissions = <%= node["postgresql"]["unix_socket_permissions"] %>   # begin with 0 to use octal notation
          # (change requires restart)
#bonjour = <%= node["postgresql"]["bonjour"] %>        # advertise server via Bonjour
          # (change requires restart)
#bonjour_name = '<%= node["postgresql"]["bonjour_name"] %>'      # defaults to the computer name
          # (change requires restart)

# - Security and Authentication -

#authentication_timeout = <%= node["postgresql"]["authentication_timeout"] %>    # 1s-600s
ssl = <%= node["postgresql"]["ssl"] %>        # (change requires restart)
#ssl_ciphers = '<%= node["postgresql"]["ssl_ciphers"] %>'  # allowed SSL ciphers
          # (change requires restart)
#ssl_renegotiation_limit = <%= node["postgresql"]["ssl_renegotiation_limit"] %>  # amount of data between renegotiations
#password_encryption = <%= node["postgresql"]["password_encryption"] %>
#db_user_namespace = <%= node["postgresql"]["db_user_namespace"] %>

# Kerberos and GSSAPI
#krb_server_keyfile = '<%= node["postgresql"]["krb_server_keyfile"] %>'
#krb_srvname = '<%= node["postgresql"]["krb_srvname"] %>'   # (Kerberos only)
#krb_caseins_users = <%= node["postgresql"]["krb_caseins_users"] %>

# - TCP Keepalives -
# see "man 7 tcp" for details

#tcp_keepalives_idle = <%= node["postgresql"]["tcp_keepalives_idle"] %>    # TCP_KEEPIDLE, in seconds;
          # 0 selects the system default
#tcp_keepalives_interval = <%= node["postgresql"]["tcp_keepalives_interval"] %>    # TCP_KEEPINTVL, in seconds;
          # 0 selects the system default
#tcp_keepalives_count = <%= node["postgresql"]["tcp_keepalives_count"] %>   # TCP_KEEPCNT;
          # 0 selects the system default


#------------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#------------------------------------------------------------------------------

# - Memory -

shared_buffers = <%= node["postgresql"]["shared_buffers"] %>     # min 128kB
          # (change requires restart)
#temp_buffers = <%= node["postgresql"]["temp_buffers"] %>     # min 800kB
#max_prepared_transactions = <%= node["postgresql"]["max_prepared_transactions"] %>    # zero disables the feature
          # (change requires restart)
# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
# It is not advisable to set max_prepared_transactions nonzero unless you
# actively intend to use prepared transactions.
#work_mem = <%= node["postgresql"]["work_mem"] %>       # min 64kB
#maintenance_work_mem = <%= node["postgresql"]["maintenance_work_mem"] %>    # min 1MB
#max_stack_depth = <%= node["postgresql"]["max_stack_depth"] %>      # min 100kB

# - Kernel Resource Usage -

#max_files_per_process = <%= node["postgresql"]["max_files_per_process"] %>   # min 25
          # (change requires restart)
#shared_preload_libraries = '<%= node["postgresql"]["shared_preload_libraries"] %>'    # (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = <%= node["postgresql"]["vacuum_cost_delay"] %>    # 0-100 milliseconds
#vacuum_cost_page_hit = <%= node["postgresql"]["vacuum_cost_page_hit"] %>   # 0-10000 credits
#vacuum_cost_page_miss = <%= node["postgresql"]["vacuum_cost_page_miss"] %>   # 0-10000 credits
#vacuum_cost_page_dirty = <%= node["postgresql"]["vacuum_cost_page_dirty"] %>    # 0-10000 credits
#vacuum_cost_limit = <%= node["postgresql"]["vacuum_cost_limit"] %>    # 1-10000 credits

# - Background Writer -

#bgwriter_delay = <%= node["postgresql"]["bgwriter_delay"] %>     # 10-10000ms between rounds
#bgwriter_lru_maxpages = <%= node["postgresql"]["bgwriter_lru_maxpages"] %>    # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = <%= node["postgresql"]["bgwriter_lru_multiplier"] %>    # 0-10.0 multipler on buffers scanned/round

# - Asynchronous Behavior -

#effective_io_concurrency = <%= node["postgresql"]["effective_io_concurrency"] %>   # 1-1000. 0 disables prefetching


#------------------------------------------------------------------------------
# WRITE AHEAD LOG
#------------------------------------------------------------------------------

# - Settings -

#wal_level = <%= node["postgresql"]["wal_level"] %>      # minimal, archive, or hot_standby
          # (change requires restart)
#fsync = <%= node["postgresql"]["fsync"] %>       # turns forced synchronization on or off
#synchronous_commit = <%= node["postgresql"]["synchronous_commit"] %>    # synchronization level; on, off, or local
#wal_sync_method = <%= node["postgresql"]["wal_sync_method"] %>    # the default is the first option
          # supported by the operating system:
          #   open_datasync
          #   fdatasync (default on Linux)
          #   fsync
          #   fsync_writethrough
          #   open_sync
#full_page_writes = <%= node["postgresql"]["full_page_writes"] %>      # recover from partial page writes
#wal_buffers = <%= node["postgresql"]["wal_buffers"] %>     # min 32kB, -1 sets based on shared_buffers
          # (change requires restart)
#wal_writer_delay = <%= node["postgresql"]["wal_writer_delay"] %>   # 1-10000 milliseconds

#commit_delay = <%= node["postgresql"]["commit_delay"] %>     # range 0-100000, in microseconds
#commit_siblings = <%= node["postgresql"]["commit_siblings"] %>      # range 1-1000

# - Checkpoints -

#checkpoint_segments = <%= node["postgresql"]["checkpoint_segments"] %>    # in logfile segments, min 1, 16MB each
#checkpoint_timeout = <%= node["postgresql"]["checkpoint_timeout"] %>    # range 30s-1h
#checkpoint_completion_target = <%= node["postgresql"]["checkpoint_completion_target"] %> # checkpoint target duration, 0.0 - 1.0
#checkpoint_warning = <%= node["postgresql"]["checkpoint_warning"] %>   # 0 disables

# - Archiving -

#archive_mode = <%= node["postgresql"]["archive_mode"] %>   # allows archiving to be done
        # (change requires restart)
#archive_command = '<%= node["postgresql"]["archive_command"] %>'   # command to use to archive a logfile segment
#archive_timeout = <%= node["postgresql"]["archive_timeout"] %>    # force a logfile segment switch after this
        # number of seconds; 0 disables


#------------------------------------------------------------------------------
# REPLICATION
#------------------------------------------------------------------------------

# - Master Server -

# These settings are ignored on a standby server

#max_wal_senders = <%= node["postgresql"]["max_wal_senders"] %>    # max number of walsender processes
        # (change requires restart)
#wal_sender_delay = <%= node["postgresql"]["wal_sender_delay"] %>    # walsender cycle time, 1-10000 milliseconds
#wal_keep_segments = <%= node["postgresql"]["wal_keep_segments"] %>    # in logfile segments, 16MB each; 0 disables
#vacuum_defer_cleanup_age = <%= node["postgresql"]["vacuum_defer_cleanup_age"] %> # number of xacts by which cleanup is delayed
#replication_timeout = <%= node["postgresql"]["replication_timeout"] %>  # in milliseconds; 0 disables
#synchronous_standby_names = '<%= node["postgresql"]["synchronous_standby_names"] %>' # standby servers that provide sync rep
        # comma-separated list of application_name
        # from standby(s); '*' = all

# - Standby Servers -

# These settings are ignored on a master server

#hot_standby = <%= node["postgresql"]["hot_standby"] %>      # "on" allows queries during recovery
          # (change requires restart)
#max_standby_archive_delay = <%= node["postgresql"]["max_standby_archive_delay"] %>  # max delay before canceling queries
          # when reading WAL from archive;
          # -1 allows indefinite delay
#max_standby_streaming_delay = <%= node["postgresql"]["max_standby_streaming_delay"] %>  # max delay before canceling queries
          # when reading streaming WAL;
          # -1 allows indefinite delay
#wal_receiver_status_interval = <%= node["postgresql"]["wal_receiver_status_interval"] %> # send replies at least this often
          # 0 disables
#hot_standby_feedback = <%= node["postgresql"]["hot_standby_feedback"] %>   # send info from standby to prevent
          # query conflicts


#------------------------------------------------------------------------------
# QUERY TUNING
#------------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = <%= node["postgresql"]["enable_bitmapscan"] %>
#enable_hashagg = <%= node["postgresql"]["enable_hashagg"] %>
#enable_hashjoin = <%= node["postgresql"]["enable_hashjoin"] %>
#enable_indexscan = <%= node["postgresql"]["enable_indexscan"] %>
#enable_material = <%= node["postgresql"]["enable_material"] %>
#enable_mergejoin = <%= node["postgresql"]["enable_mergejoin"] %>
#enable_nestloop = <%= node["postgresql"]["enable_nestloop"] %>
#enable_seqscan = <%= node["postgresql"]["enable_seqscan"] %>
#enable_sort = <%= node["postgresql"]["enable_sort"] %>
#enable_tidscan = <%= node["postgresql"]["enable_tidscan"] %>

# - Planner Cost Constants -

#seq_page_cost = <%= node["postgresql"]["seq_page_cost"] %>      # measured on an arbitrary scale
#random_page_cost = <%= node["postgresql"]["random_page_cost"] %>     # same scale as above
#cpu_tuple_cost = <%= node["postgresql"]["cpu_tuple_cost"] %>      # same scale as above
#cpu_index_tuple_cost = <%= node["postgresql"]["cpu_index_tuple_cost"] %>   # same scale as above
#cpu_operator_cost = <%= node["postgresql"]["cpu_operator_cost"] %>   # same scale as above
#effective_cache_size = <%= node["postgresql"]["effective_cache_size"] %>

# - Genetic Query Optimizer -

#geqo = <%= node["postgresql"]["geqo"] %>
#geqo_threshold = <%= node["postgresql"]["geqo_threshold"] %>
#geqo_effort = <%= node["postgresql"]["geqo_effort"] %>      # range 1-10
#geqo_pool_size = <%= node["postgresql"]["geqo_pool_size"] %>     # selects default based on effort
#geqo_generations = <%= node["postgresql"]["geqo_generations"] %>     # selects default based on effort
#geqo_selection_bias = <%= node["postgresql"]["geqo_selection_bias"] %>    # range 1.5-2.0
#geqo_seed = <%= node["postgresql"]["geqo_seed"] %>      # range 0.0-1.0

# - Other Planner Options -

#default_statistics_target = <%= node["postgresql"]["default_statistics_target"] %>  # range 1-10000
#constraint_exclusion = <%= node["postgresql"]["constraint_exclusion"] %> # on, off, or partition
#cursor_tuple_fraction = <%= node["postgresql"]["cursor_tuple_fraction"] %>    # range 0.0-1.0
#from_collapse_limit = <%= node["postgresql"]["from_collapse_limit"] %>
#join_collapse_limit = <%= node["postgresql"]["join_collapse_limit"] %>    # 1 disables collapsing of explicit
          # JOIN clauses


#------------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#------------------------------------------------------------------------------

# - Where to Log -

#log_destination = '<%= node["postgresql"]["log_destination"] %>'   # Valid values are combinations of
          # stderr, csvlog, syslog, and eventlog,
          # depending on platform.  csvlog
          # requires logging_collector to be on.

# This is used when logging to stderr:
#logging_collector = <%= node["postgresql"]["logging_collector"] %>    # Enable capturing of stderr and csvlog
          # into log files. Required to be on for
          # csvlogs.
          # (change requires restart)

# These are only used if logging_collector is on:
#log_directory = '<%= node["postgresql"]["log_directory"] %>'   # directory where log files are written,
          # can be absolute or relative to PGDATA
#log_filename = '<%= node["postgresql"]["log_filename"] %>'  # log file name pattern,
          # can include strftime() escapes
#log_file_mode = <%= node["postgresql"]["log_file_mode"] %>     # creation mode for log files,
          # begin with 0 to use octal notation
#log_truncate_on_rotation = <%= node["postgresql"]["log_truncate_on_rotation"] %>   # If on, an existing log file with the
          # same name as the new log file will be
          # truncated rather than appended to.
          # But such truncation only occurs on
          # time-driven rotation, not on restarts
          # or size-driven rotation.  Default is
          # off, meaning append to existing files
          # in all cases.
#log_rotation_age = <%= node["postgresql"]["log_rotation_age"] %>      # Automatic rotation of logfiles will
          # happen after that time.  0 disables.
#log_rotation_size = <%= node["postgresql"]["log_rotation_size"] %>   # Automatic rotation of logfiles will
          # happen after that much log output.
          # 0 disables.

# These are relevant when logging to syslog:
#syslog_facility = '<%= node["postgresql"]["syslog_facility"] %>'
#syslog_ident = '<%= node["postgresql"]["syslog_ident"] %>'

#silent_mode = <%= node["postgresql"]["silent_mode"] %>      # Run server silently.
          # DO NOT USE without syslog or
          # logging_collector
          # (change requires restart)


# - When to Log -

#client_min_messages = <%= node["postgresql"]["client_min_messages"] %>   # values in order of decreasing detail:
          #   debug5
          #   debug4
          #   debug3
          #   debug2
          #   debug1
          #   log
          #   notice
          #   warning
          #   error

#log_min_messages = <%= node["postgresql"]["log_min_messages"] %>   # values in order of decreasing detail:
          #   debug5
          #   debug4
          #   debug3
          #   debug2
          #   debug1
          #   info
          #   notice
          #   warning
          #   error
          #   log
          #   fatal
          #   panic

#log_min_error_statement = <%= node["postgresql"]["log_min_error_statement"] %>  # values in order of decreasing detail:
          #   debug5
          #   debug4
          #   debug3
          #   debug2
          #   debug1
          #   info
          #   notice
          #   warning
          #   error
          #   log
          #   fatal
          #   panic (effectively off)

#log_min_duration_statement = <%= node["postgresql"]["log_min_duration_statement"] %>  # -1 is disabled, 0 logs all statements
          # and their durations, > 0 logs only
          # statements running at least this number
          # of milliseconds


# - What to Log -

#debug_print_parse = <%= node["postgresql"]["debug_print_parse"] %>
#debug_print_rewritten = <%= node["postgresql"]["debug_print_rewritten"] %>
#debug_print_plan = <%= node["postgresql"]["debug_print_plan"] %>
#debug_pretty_print = <%= node["postgresql"]["debug_pretty_print"] %>
#log_checkpoints = <%= node["postgresql"]["log_checkpoints"] %>
#log_connections = <%= node["postgresql"]["log_connections"] %>
#log_disconnections = <%= node["postgresql"]["log_disconnections"] %>
#log_duration = <%= node["postgresql"]["log_duration"] %>
#log_error_verbosity = <%= node["postgresql"]["log_error_verbosity"] %>    # terse, default, or verbose messages
#log_hostname = <%= node["postgresql"]["log_hostname"] %>
log_line_prefix = '<%= node["postgresql"]["log_line_prefix"] %>'     # special values:
          #   %a = application name
          #   %u = user name
          #   %d = database name
          #   %r = remote host and port
          #   %h = remote host
          #   %p = process ID
          #   %t = timestamp without milliseconds
          #   %m = timestamp with milliseconds
          #   %i = command tag
          #   %e = SQL state
          #   %c = session ID
          #   %l = session line number
          #   %s = session start timestamp
          #   %v = virtual transaction ID
          #   %x = transaction ID (0 if none)
          #   %q = stop here in non-session
          #        processes
          #   %% = '%'
          # e.g. '[%u%%%d] '
#log_lock_waits = <%= node["postgresql"]["log_lock_waits"] %>     # log lock waits >= deadlock_timeout
#log_statement = '<%= node["postgresql"]["log_statement"] %>'     # none, ddl, mod, all
#log_temp_files = <%= node["postgresql"]["log_temp_files"] %>      # log temporary files equal or larger
          # than the specified size in kilobytes;
          # -1 disables, 0 logs all temp files
#log_timezone = '<%= node["postgresql"]["log_timezone"] %>'


#------------------------------------------------------------------------------
# RUNTIME STATISTICS
#------------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#track_activities = <%= node["postgresql"]["track_activities"] %>
#track_counts = <%= node["postgresql"]["track_counts"] %>
#track_functions = <%= node["postgresql"]["track_functions"] %>     # none, pl, all
#track_activity_query_size = <%= node["postgresql"]["track_activity_query_size"] %>   # (change requires restart)
#update_process_title = <%= node["postgresql"]["update_process_title"] %>
#stats_temp_directory = '<%= node["postgresql"]["stats_temp_directory"] %>'


# - Statistics Monitoring -

#log_parser_stats = <%= node["postgresql"]["log_parser_stats"] %>
#log_planner_stats = <%= node["postgresql"]["log_planner_stats"] %>
#log_executor_stats = <%= node["postgresql"]["log_executor_stats"] %>
#log_statement_stats = <%= node["postgresql"]["log_statement_stats"] %>


#------------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#------------------------------------------------------------------------------

#autovacuum = <%= node["postgresql"]["autovacuum"] %>      # Enable autovacuum subprocess?  'on'
          # requires track_counts to also be on.
#log_autovacuum_min_duration = <%= node["postgresql"]["log_autovacuum_min_duration"] %> # -1 disables, 0 logs all actions and
          # their durations, > 0 logs only
          # actions running at least this number
          # of milliseconds.
#autovacuum_max_workers = <%= node["postgresql"]["autovacuum_max_workers"] %>   # max number of autovacuum subprocesses
          # (change requires restart)
#autovacuum_naptime = <%= node["postgresql"]["autovacuum_naptime"] %>    # time between autovacuum runs
#autovacuum_vacuum_threshold = <%= node["postgresql"]["autovacuum_vacuum_threshold"] %> # min number of row updates before
          # vacuum
#autovacuum_analyze_threshold = <%= node["postgresql"]["autovacuum_analyze_threshold"] %>  # min number of row updates before
          # analyze
#autovacuum_vacuum_scale_factor = <%= node["postgresql"]["autovacuum_vacuum_scale_factor"] %> # fraction of table size before vacuum
#autovacuum_analyze_scale_factor = <%= node["postgresql"]["autovacuum_analyze_scale_factor"] %>  # fraction of table size before analyze
#autovacuum_freeze_max_age = <%= node["postgresql"]["autovacuum_freeze_max_age"] %>  # maximum XID age before forced vacuum
          # (change requires restart)
#autovacuum_vacuum_cost_delay = <%= node["postgresql"]["autovacuum_vacuum_cost_delay"] %>  # default vacuum cost delay for
          # autovacuum, in milliseconds;
          # -1 means use vacuum_cost_delay
#autovacuum_vacuum_cost_limit = <%= node["postgresql"]["autovacuum_vacuum_cost_limit"] %>  # default vacuum cost limit for
          # autovacuum, -1 means use
          # vacuum_cost_limit


#------------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#------------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '<%= node["postgresql"]["search_path"] %>'   # schema names
#default_tablespace = '<%= node["postgresql"]["default_tablespace"] %>'    # a tablespace name, '' uses the default
#temp_tablespaces = '<%= node["postgresql"]["temp_tablespaces"] %>'      # a list of tablespace names, '' uses
          # only default tablespace
#check_function_bodies = <%= node["postgresql"]["check_function_bodies"] %>
#default_transaction_isolation = '<%= node["postgresql"]["default_transaction_isolation"] %>'
#default_transaction_read_only = <%= node["postgresql"]["default_transaction_read_only"] %>
#default_transaction_deferrable = <%= node["postgresql"]["default_transaction_deferrable"] %>
#session_replication_role = '<%= node["postgresql"]["session_replication_role"] %>'
#statement_timeout = <%= node["postgresql"]["statement_timeout"] %>      # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = <%= node["postgresql"]["vacuum_freeze_min_age"] %>
#vacuum_freeze_table_age = <%= node["postgresql"]["vacuum_freeze_table_age"] %>
#bytea_output = '<%= node["postgresql"]["bytea_output"] %>'     # hex, escape
#xmlbinary = '<%= node["postgresql"]["xmlbinary"] %>'
#xmloption = '<%= node["postgresql"]["xmloption"] %>'

# - Locale and Formatting -

datestyle = '<%= node["postgresql"]["datestyle"] %>'
#intervalstyle = '<%= node["postgresql"]["intervalstyle"] %>'
#timezone = '<%= node["postgresql"]["timezone"] %>'
#timezone_abbreviations = '<%= node["postgresql"]["timezone_abbreviations"] %>'     # Select the set of available time zone
          # abbreviations.  Currently, there are
          #   Default
          #   Australia
          #   India
          # You can create your own file in
          # share/timezonesets/.
#extra_float_digits = <%= node["postgresql"]["extra_float_digits"] %>     # min -15, max 3
#client_encoding = <%= node["postgresql"]["client_encoding"] %>    # actually, defaults to database
          # encoding

# These settings are initialized by initdb, but they can be changed.
lc_messages = '<%= node["postgresql"]["lc_messages"] %>'     # locale for system error message
          # strings
lc_monetary = '<%= node["postgresql"]["lc_monetary"] %>'     # locale for monetary formatting
lc_numeric = '<%= node["postgresql"]["lc_numeric"] %>'      # locale for number formatting
lc_time = '<%= node["postgresql"]["lc_time"] %>'       # locale for time formatting

# default configuration for text search
default_text_search_config = '<%= node["postgresql"]["default_text_search_config"] %>'

# - Other Defaults -

#dynamic_library_path = '<%= node["postgresql"]["dynamic_library_path"] %>'
#local_preload_libraries = '<%= node["postgresql"]["local_preload_libraries"] %>'


#------------------------------------------------------------------------------
# LOCK MANAGEMENT
#------------------------------------------------------------------------------

#deadlock_timeout = <%= node["postgresql"]["deadlock_timeout"] %>
#max_locks_per_transaction = <%= node["postgresql"]["max_locks_per_transaction"] %>   # min 10
          # (change requires restart)
# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.
#max_pred_locks_per_transaction = <%= node["postgresql"]["max_pred_locks_per_transaction"] %>  # min 10
          # (change requires restart)

#------------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#------------------------------------------------------------------------------

# - Previous PostgreSQL Versions -

#array_nulls = <%= node["postgresql"]["array_nulls"] %>
#backslash_quote = <%= node["postgresql"]["backslash_quote"] %>  # on, off, or safe_encoding
#default_with_oids = <%= node["postgresql"]["default_with_oids"] %>
#escape_string_warning = <%= node["postgresql"]["escape_string_warning"] %>
#lo_compat_privileges = <%= node["postgresql"]["lo_compat_privileges"] %>
#quote_all_identifiers = <%= node["postgresql"]["quote_all_identifiers"] %>
#sql_inheritance = <%= node["postgresql"]["sql_inheritance"] %>
#standard_conforming_strings = <%= node["postgresql"]["standard_conforming_strings"] %>
#synchronize_seqscans = <%= node["postgresql"]["synchronize_seqscans"] %>

# - Other Platforms and Clients -

#transform_null_equals = <%= node["postgresql"]["transform_null_equals"] %>


#------------------------------------------------------------------------------
# ERROR HANDLING
#------------------------------------------------------------------------------

#exit_on_error = <%= node["postgresql"]["exit_on_error"] %>        # terminate session on any error?
#restart_after_crash = <%= node["postgresql"]["restart_after_crash"] %>     # reinitialize after backend crash?


#------------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#------------------------------------------------------------------------------

#custom_variable_classes = '<%= node["postgresql"]["custom_variable_classes"] %>'   # list of custom variable class names