phoenix_live_component.ex

defmodule Phoenix.LiveComponent do
  @moduledoc ~S'''
  LiveComponents are a mechanism to compartmentalize state, markup, and
  events in LiveView.

  LiveComponents are defined by using `Phoenix.LiveComponent` and are used
  by calling `Phoenix.Component.live_component/1` in a parent LiveView.
  They run inside the LiveView process but have their own state and
  life-cycle. For this reason, they are also often called "stateful components".
  This is a contrast to `Phoenix.Component`, also known as "function components",
  which are stateless.

  The smallest LiveComponent only needs to define a `c:render/1` function:

      defmodule HeroComponent do
        # If you generated an app with mix phx.new --live,
        # the line below would be: use MyAppWeb, :live_component
        use Phoenix.LiveComponent

        def render(assigns) do
          ~H"""
          <div class="hero"><%= @content %></div>
          """
        end
      end

  A LiveComponent is rendered as:

      <.live_component module={HeroComponent} id="hero" content={@content} />

  You must always pass the `module` and `id` attributes. The `id` will be
  available as an assign and it must be used to uniquely identify the
  component. All other attributes will be available as assigns inside the
  LiveComponent.

  ## Life-cycle

  Stateful components are identified by the component module and their ID.
  Therefore, two stateful components with the same module and ID are treated
  as the same component. We often tie the component ID to some application based ID:

      <.live_component module={UserComponent} id={@user.id} user={@user} />

  When [`live_component/1`](`Phoenix.Component.live_component/1`) is called,
  `c:mount/1` is called once, when the component is first added to the page. `c:mount/1`
  receives the `socket` as argument. Then `c:update/2` is invoked with all of the
  assigns given to [`live_component/1`](`Phoenix.Component.live_component/1`).
  If `c:update/2` is not defined all assigns are simply merged into the socket.
  After the component is updated, `c:render/1` is called with all assigns.
  On first render, we get:

      mount(socket) -> update(assigns, socket) -> render(assigns)

  On further rendering:

      update(assigns, socket) -> render(assigns)

  The given `id` is not automatically used as the DOM ID. If you want to set
  a DOM ID, it is your responsibility to do so when rendering:

      defmodule UserComponent do
        use Phoenix.LiveComponent

        def render(assigns) do
          ~H"""
          <div id={"user-\#{@id}"} class="user">
            <%= @user.name %>
          </div>
          """
        end
      end

  ## Targeting Component Events

  Stateful components can also implement the `c:handle_event/3` callback
  that works exactly the same as in LiveView. For a client event to
  reach a component, the tag must be annotated with a `phx-target`.
  If you want to send the event to yourself, you can simply use the
  `@myself` assign, which is an *internal unique reference* to the
  component instance:

      <a href="#" phx-click="say_hello" phx-target={@myself}>
        Say hello!
      </a>

  Note that `@myself` is not set for stateless components, as they cannot
  receive events.

  If you want to target another component, you can also pass an ID
  or a class selector to any element inside the targeted component.
  For example, if there is a `UserComponent` with the DOM ID of `"user-13"`,
  using a query selector, we can send an event to it with:

      <a href="#" phx-click="say_hello" phx-target="#user-13">
        Say hello!
      </a>

  In both cases, `c:handle_event/3` will be called with the
  "say_hello" event. When `c:handle_event/3` is called for a component,
  only the diff of the component is sent to the client, making them
  extremely efficient.

  Any valid query selector for `phx-target` is supported, provided that the
  matched nodes are children of a LiveView or LiveComponent, for example
  to send the `close` event to multiple components:

      <a href="#" phx-click="close" phx-target="#modal, #sidebar">
        Dismiss
      </a>

  ## Preloading and update

  Stateful components also support an optional `c:preload/1` callback.
  The `c:preload/1` callback is useful when multiple components of the
  same type are rendered on the page and you want to preload or augment
  their data in batches.

  Once a LiveView renders a LiveComponent, the optional `c:preload/1` and
  `c:update/2` callbacks are called before `c:render/1`.

  So on first render, the following callbacks will be invoked:

      preload(list_of_assigns) -> mount(socket) -> update(assigns, socket) -> render(assigns)

  On subsequent renders, these callbacks will be invoked:

      preload(list_of_assigns) -> update(assigns, socket) -> render(assigns)

  To provide a more complete understanding of why both callbacks are necessary,
  let's see an example. Imagine you are implementing a component and the component
  needs to load some state from the database. For example:

      <.live_component module={UserComponent} id={user_id} />

  A possible implementation would be to load the user on the `c:update/2`
  callback:

      def update(assigns, socket) do
        user = Repo.get!(User, assigns.id)
        {:ok, assign(socket, :user, user)}
      end

  However, the issue with said approach is that, if you are rendering
  multiple user components in the same page, you have a N+1 query problem.
  The `c:preload/1` callback helps address this problem as it is invoked
  with a list of assigns for all components of the same type. For example,
  instead of implementing `c:update/2` as above, one could implement:

      def preload(list_of_assigns) do
        list_of_ids = Enum.map(list_of_assigns, & &1.id)

        users =
          from(u in User, where: u.id in ^list_of_ids, select: {u.id, u})
          |> Repo.all()
          |> Map.new()

        Enum.map(list_of_assigns, fn assigns ->
          Map.put(assigns, :user, users[assigns.id])
        end)
      end

  Now only a single query to the database will be made. In fact, the
  preloading algorithm is a breadth-first tree traversal, which means
  that even for nested components, the amount of queries are kept to
  a minimum.

  Finally, note that `c:preload/1` must return an updated `list_of_assigns`,
  keeping the assigns in the same order as they were given.

  ## Slots

  LiveComponent can also receive slots, in the same way as a `Phoenix.Component`:

      <.live_component module={MyComponent} id={@data.id} >
        <div>Inner content here</div>
      </.live_component>

  If the LiveComponent defines an `c:update/2`, be sure that the socket it returns
  includes the `:inner_block` assign it received.

  See [the docs](Phoenix.Component.html#module-slots.md) for `Phoenix.Component` for more information.

  ## Live patches and live redirects

  A template rendered inside a component can use `<.link patch={...}>` and
  `<.link navigate={...}>`. Patches are always handled by the parent `LiveView`,
  as components do not provide `handle_params`.

  ## Managing state

  Now that we have learned how to define and use components, as well as
  how to use `c:preload/1` as a data loading optimization, it is important
  to talk about how to manage state in components.

  Generally speaking, you want to avoid both the parent LiveView and the
  LiveComponent working on two different copies of the state. Instead, you
  should assume only one of them to be the source of truth. Let's discuss
  the two different approaches in detail.

  Imagine a scenario where a LiveView represents a board with each card
  in it as a separate stateful LiveComponent. Each card has a form to
  allow update of the card title directly in the component, as follows:

      defmodule CardComponent do
        use Phoenix.LiveComponent

        def render(assigns) do
          ~H"""
          <form phx-submit="..." phx-target={@myself}>
            <input name="title"><%= @card.title %></input>
            ...
          </form>
          """
        end

        ...
      end

  We will see how to organize the data flow to keep either the board LiveView or
  the card LiveComponents as the source of truth.

  ### LiveView as the source of truth

  If the board LiveView is the source of truth, it will be responsible
  for fetching all of the cards in a board. Then it will call
  [`live_component/1`](`Phoenix.Component.live_component/1`)
  for each card, passing the card struct as argument to `CardComponent`:

      <%= for card <- @cards do %>
        <.live_component module={CardComponent} card={card} id={card.id} board_id={@id} />
      <% end %>

  Now, when the user submits the form, `CardComponent.handle_event/3`
  will be triggered. However, if the update succeeds, you must not
  change the card struct inside the component. If you do so, the card
  struct in the component will get out of sync with the LiveView.  Since
  the LiveView is the source of truth, you should instead tell the
  LiveView that the card was updated.

  Luckily, because the component and the view run in the same process,
  sending a message from the LiveComponent to the parent LiveView is as
  simple as sending a message to `self()`:

      defmodule CardComponent do
        ...
        def handle_event("update_title", %{"title" => title}, socket) do
          send self(), {:updated_card, %{socket.assigns.card | title: title}}
          {:noreply, socket}
        end
      end

  The LiveView then receives this event using `c:Phoenix.LiveView.handle_info/2`:

      defmodule BoardView do
        ...
        def handle_info({:updated_card, card}, socket) do
          # update the list of cards in the socket
          {:noreply, updated_socket}
        end
      end

  Because the list of cards in the parent socket was updated, the parent
  LiveView will be re-rendered, sending the updated card to the component.
  So in the end, the component does get the updated card, but always
  driven from the parent.

  Alternatively, instead of having the component send a message directly to the
  parent view, the component could broadcast the update using `Phoenix.PubSub`.
  Such as:

      defmodule CardComponent do
        ...
        def handle_event("update_title", %{"title" => title}, socket) do
          message = {:updated_card, %{socket.assigns.card | title: title}}
          Phoenix.PubSub.broadcast(MyApp.PubSub, board_topic(socket), message)
          {:noreply, socket}
        end

        defp board_topic(socket) do
          "board:" <> socket.assigns.board_id
        end
      end

  As long as the parent LiveView subscribes to the `board:<ID>` topic,
  it will receive updates. The advantage of using PubSub is that we get
  distributed updates out of the box. Now, if any user connected to the
  board changes a card, all other users will see the change.

  ### LiveComponent as the source of truth

  If each card LiveComponent is the source of truth, then the board LiveView
  must no longer fetch the card structs from the database. Instead, the board
  LiveView must only fetch the card ids, then render each component only by
  passing an ID:

      <%= for card_id <- @card_ids do %>
        <.live_component module={CardComponent} id={card_id} board_id={@id} />
      <% end %>

  Now, each CardComponent will load its own card. Of course, doing so
  per card could be expensive and lead to N queries, where N is the
  number of cards, so we can use the `c:preload/1` callback to make it
  efficient.

  Once the card components are started, they can each manage their own
  card, without concerning themselves with the parent LiveView.

  However, note that components do not have a `c:Phoenix.LiveView.handle_info/2`
  callback. Therefore, if you want to track distributed changes on a card,
  you must have the parent LiveView receive those events and redirect them
  to the appropriate card. For example, assuming card updates are sent
  to the "board:ID" topic, and that the board LiveView is subscribed to
  said topic, one could do:

      def handle_info({:updated_card, card}, socket) do
        send_update CardComponent, id: card.id, board_id: socket.assigns.id
        {:noreply, socket}
      end

  With `Phoenix.LiveView.send_update/3`, the `CardComponent` given by `id`
  will be invoked, triggering both preload and update callbacks, which will
  load the most up to date data from the database.

  ## Cost of stateful components

  The internal infrastructure LiveView uses to keep track of stateful
  components is very lightweight. However, be aware that in order to
  provide change tracking and to send diffs over the wire, all of the
  components' assigns are kept in memory - exactly as it is done in
  LiveViews themselves.

  Therefore it is your responsibility to keep only the assigns necessary
  in each component. For example, avoid passing all of LiveView's assigns
  when rendering a component:

      <.live_component module={MyComponent} {assigns} />

  Instead pass only the keys that you need:

      <.live_component module={MyComponent} user={@user} org={@org} />

  Luckily, because LiveViews and LiveComponents are in the same process,
  they share the data structure representations in memory. For example,
  in the code above, the view and the component will share the same copies
  of the `@user` and `@org` assigns.

  You should also avoid using stateful components to provide abstract DOM
  components. As a guideline, a good LiveComponent encapsulates
  application concerns and not DOM functionality. For example, if you
  have a page that shows products for sale, you can encapsulate the
  rendering of each of those products in a component. This component
  may have many buttons and events within it. On the opposite side,
  do not write a component that is simply encapsulating generic DOM
  components. For instance, do not do this:

      defmodule MyButton do
        use Phoenix.LiveComponent

        def render(assigns) do
          ~H"""
          <button class="css-framework-class" phx-click="click">
            <%= @text %>
          </button>
          """
        end

        def handle_event("click", _, socket) do
          _ = socket.assigns.on_click.()
          {:noreply, socket}
        end
      end

  Instead, it is much simpler to create a function component:

      def my_button(%{text: _, click: _} = assigns) do
        ~H"""
        <button class="css-framework-class" phx-click={@click}>
          <%= @text %>
        </button>
        """
      end

  If you keep components mostly as an application concern with
  only the necessary assigns, it is unlikely you will run into
  issues related to stateful components.

  ## Limitations

  ### Live Components require a single HTML tag at the root

  Live Components require a single HTML tag at the root. It is not possible
  to have components that render only text or multiple tags.

  ### SVG support

  Given components compartmentalize markup on the server, they are also
  rendered in isolation on the client, which provides great performance
  benefits on the client too.

  However, when rendering components on the client, the client needs to
  choose the mime type of the component contents, which defaults to HTML.
  This is the best default but in some cases it may lead to unexpected
  results.

  For example, if you are rendering SVG, the SVG will be interpreted as
  HTML. This may work just fine for most components but you may run into
  corner cases. For example, the `<image>` SVG tag may be rewritten to
  the `<img>` tag, since `<image>` is an obsolete HTML tag.

  Luckily, there is a simple solution to this problem. Since SVG allows
  `<svg>` tags to be nested, you can wrap the component content into an
  `<svg>` tag. This will ensure that it is correctly interpreted by the
  browser.
  '''

  defmodule CID do
    @moduledoc """
    The struct representing an internal unique reference to the component instance,
    available as the `@myself` assign in stateful components.

    Read more about the uses of `@myself` in the `Phoenix.LiveComponent` docs.
    """

    defstruct [:cid]

    defimpl Phoenix.HTML.Safe do
      def to_iodata(%{cid: cid}), do: Integer.to_string(cid)
    end

    defimpl String.Chars do
      def to_string(%{cid: cid}), do: Integer.to_string(cid)
    end
  end

  alias Phoenix.LiveView.Socket

  @doc """
  Uses LiveComponent in the current module.

      use Phoenix.LiveComponent

  ## Options

    * `:global_prefixes` - the global prefixes to use for components. See
      `Global Attributes` in `Phoenix.Component` for more information.
  """
  defmacro __using__(opts \\ []) do
    quote do
      import Phoenix.LiveView
      @behaviour Phoenix.LiveComponent
      @before_compile Phoenix.LiveView.Renderer

      # Phoenix.Component must come last so its @before_compile runs last
      use Phoenix.Component, Keyword.take(unquote(opts), [:global_prefixes])

      @doc false
      def __live__, do: %{kind: :component, module: __MODULE__, layout: false}
    end
  end

  @callback mount(socket :: Socket.t()) ::
              {:ok, Socket.t()} | {:ok, Socket.t(), keyword()}

  @callback preload(list_of_assigns :: [Socket.assigns()]) ::
              list_of_assigns :: [Socket.assigns()]

  @callback update(assigns :: Socket.assigns(), socket :: Socket.t()) ::
              {:ok, Socket.t()}

  @callback render(assigns :: Socket.assigns()) :: Phoenix.LiveView.Rendered.t()

  @callback handle_event(
              event :: binary,
              unsigned_params :: Phoenix.LiveView.unsigned_params(),
              socket :: Socket.t()
            ) ::
              {:noreply, Socket.t()} | {:reply, map, Socket.t()}

  @optional_callbacks mount: 1, preload: 1, update: 2, handle_event: 3
end