libratbag is a configuration library for gaming mice. It provides a generic way to access the various features exposed by these mice and abstracts away hardware-specific and kernel-specific quirks.
libratbag exports the devices over a DBus daemon called ratbagd, see the ratbagd DBus Interface description.
libratbag uses the meson build system which in turn uses ninja to invoke the compiler. Run the following commands to clone libratbag and initialize the build:
git clone https://github.com/libratbag/libratbag.git
cd libratbag
meson builddir --prefix=/usr/
And to build or re-build after code-changes, run:
ninja -C builddir
sudo ninja -C builddir install
Note: builddir is the build output directory and can be changed to any
other directory name. To set configure-time options, use e.g.
mesonconf builddir -Denable-documentation=false
Run mesonconf builddir to list the options.
To run ratbagd, simply run it as root sudo ratbagd. However,
ratbagd is intended to run as dbus-activated systemd service and installs
the following files:
/usr/share/dbus-1/system.d/org.freedesktop.ratbag1.conf
/usr/share/dbus-1/system-services/org.freedesktop.ratbag1.conf
/usr/share/systemd/system/ratbagd.service
These files are installed into the prefix by ninja install, see also the
configure-time options -Dsystemd-unit-dir and -Ddbus-root-dir.
Developers are encouraged to simply symlink to the files in the git
repository.
For the files to take effect, you should run
sudo systemctl daemon-reload
sudo systemctl reload dbus.service
And finally, to enable the service:
sudo systemctl enable ratbagd.service
This places the required symlink into the systemd directory so that dbus activation is possible.
libratbag has two main components, libratbag and ratbagd. The former is a library to access the devices. It consists of the front-end API and wrapper code, and the back-end HW-specific drivers:
+-----+ +-----+ +-----------+ +----------+
| app | -> | API | -> | hw-driver | -> | protocol | -> device
+-----+ +-----+ +-----------+ +----------+
The API layer is HW agnostic. Depend on the HW, the protocol may be part of the driver implementation (e.g. etekcity) or a separate set of files (HID++). Where the protocol is separate, the whole known protocol should be implemented. The HW driver then only accesses the bits required for libratbag. This allows us to optionally export the protocol as separate library in the future, if other projects require it.
As of commit 3605bede4 libratbag now uses a hwdb entry to match the device with the drivers. To access a device through libratbag, the udev property RATBAG_DRIVER must be set for a device's event node. Check with
sudo udevadm info /sys/class/input/eventX | grep RATBAG_DRIVER
If your device is not yet assigned the property, it is not in the hwdb. It
may however be supported by one of our existing drivers. Try enabling it by
adding the device vendor-id/product-id to the hwdb file in
hwdb/70-libratbag-mouse.hwdb. For example, for a HID++ 1.0 device, edit
the 70-libratbag-mouse.hwdb file and add an entry with RATBAG_DRIVER=hidpp10.
For the other drivers, look for the id of the driver in driver-{drivername}.c
file and do the same.
Once your device is added to the hwdb, install libratbag and trigger a hwdb update:
sudo udevadm hwdb --update
sudo udevadm control --reload
Then unplug/replug your mouse. RATBAG_DRIVER should appear in the udev
properties of your device with the value you previously set. If the property
is not assigned, the hwdb entry does not correctly match your device or the
installed udev rules/hwdb entries are not picked up by udev.
If the device doesn't work, you'll have to start reverse-engineering the device-specific protocol. Good luck :)
git clone https://github.com/libratbag/libratbag.git
Bugs can be reported in the issue tracker on our github repo: https://github.com/libratbag/libratbag/issues
libratbag discussions happen on the input-tools mailing list hosted on freedesktop.org: http://lists.freedesktop.org/archives/input-tools/
A number of device-specific notes and observations can be found in our "device-notes" repository: http://libratbag.github.io/device-notes/
libratbag is licensed under the MIT license.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: [...]
See the COPYING file for the full license information.
