Skip to content

Latest commit

 

History

History
141 lines (103 loc) · 4.23 KB

bluepill_f103c6.rst

File metadata and controls

141 lines (103 loc) · 4.23 KB
Raw

BluePill F103C6

Contents

Hardware

Platform :ref:`platform_ststm32`: The STM32 family of 32-bit Flash MCUs based on the ARM Cortex-M processor is designed to offer new degrees of freedom to MCU users. It offers a 32-bit product range that combines very high performance, real-time capabilities, digital signal processing, and low-power, low-voltage operation, while maintaining full integration and ease of development.

Microcontroller STM32F103C6T6
Frequency 72MHz
Flash 32KB
RAM 10KB
Vendor Generic

Configuration

Please use bluepill_f103c6 ID for :ref:`projectconf_env_board` option in :ref:`projectconf`:

[env:bluepill_f103c6]
platform = ststm32
board = bluepill_f103c6

You can override default BluePill F103C6 settings per build environment using board_*** option, where *** is a JSON object path from board manifest bluepill_f103c6.json. For example, board_build.mcu, board_build.f_cpu, etc.

[env:bluepill_f103c6]
platform = ststm32
board = bluepill_f103c6

; change microcontroller
board_build.mcu = stm32f103c6t6

; change MCU frequency
board_build.f_cpu = 72000000L

Uploading

BluePill F103C6 supports the following uploading protocols:

  • blackmagic
  • cmsis-dap
  • jlink
  • serial
  • stlink

Default protocol is stlink

You can change upload protocol using :ref:`projectconf_upload_protocol` option:

[env:bluepill_f103c6]
platform = ststm32
board = bluepill_f103c6

upload_protocol = stlink

Debugging

:ref:`piodebug` - "1-click" solution for debugging with a zero configuration.

Warning

You will need to install debug tool drivers depending on your system. Please click on compatible debug tool below for the further instructions and configuration information.

You can switch between debugging :ref:`debugging_tools` using :ref:`projectconf_debug_tool` option in :ref:`projectconf`.

BluePill F103C6 does not have on-board debug probe and IS NOT READY for debugging. You will need to use/buy one of external probe listed below.

Compatible Tools On-board Default
:ref:`debugging_tool_blackmagic`    
:ref:`debugging_tool_cmsis-dap`    
:ref:`debugging_tool_jlink`    
:ref:`debugging_tool_stlink`   Yes

Frameworks

Name Description
:ref:`framework_arduino` Arduino Wiring-based Framework allows writing cross-platform software to control devices attached to a wide range of Arduino boards to create all kinds of creative coding, interactive objects, spaces or physical experiences.
:ref:`framework_cmsis` Vendor-independent hardware abstraction layer for the Cortex-M processor series
:ref:`framework_libopencm3` Open source ARM Cortex-M microcontroller library
:ref:`framework_stm32cube` STM32Cube embedded software libraries, including: The HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls; The Low-Layer (LL) APIs, a light-weight, optimized, expert oriented set of APIs designed for both performance and runtime efficiency