Developed by Tashrif Billah and Isaiah Norton, Brigham and Women's Hospital (Harvard Medical School).

SlicerDiffusionQC

This is a complete slicer module for quality checking of diffusion weighted MRI. It identifies bad gradients by comparing distance of each gradient to a median line. The median line is obtained from KL divergences between consecutive slices. After above processing, it allows user to manually review each gradient: keep or discard them.

A similar software, based on MATLAB environment, was developed earlier by a group of Yogesh Rathi, Associate Professor, Harvard Medical School. The MATLAB SignalDropQCTool is available at here. On the other hand, the SlicerDiffusionQC is a faster, cleaner, and more user oriented version of that software.

Citation

If you use our software in your research, please cite as below:

Billah, Tashrif; Norton, Isaiah; Rathi, Yogesh; Bouix, Sylvain, Come, Carquex; Slicer Diffusion QC Tool, https://github.com/pnlbwh/SlicerDiffusionQC, 2018, DOI: 10.5281/zenodo.2576412

Installation

System requirement: The program has been extensively tested on Linux Centos7. However, it should run well on any Linux machine. But, we do not have test/support for other platforms (MAC, Windows) yet. We are working on it.

Download Slicer-4.10.0. Slicer Diffusion QC Tool is available as an extension to Slicer. From Extension Manager in Slicer, search DiffusionQC and install.

NOTE DiffusionQC should work with any version >= Slicer-4.9.

Usage

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -h

Checks the quality of gradients in a diffusion weighted mri.
Predicts each gradient as pass or fail.

Usage:
    diffusionQC.py [SWITCHES] 

Meta-switches:
    -h, --help                          Prints this help message and quits
    --help-all                          Prints help messages of all sub-commands and quits
    -v, --version                       Prints the program's version and quits

Switches:
    -a, --auto                          Turn on this flag for command line/automatic processing w/o Slicer
                                        visualization
    -i, --input VALUE:ExistingFile      diffusion weighted mri e.g. dwi.nrrd or path/to/dwi.nrrd, accepted formats:
                                        nhdr, nrrd, nii, and nii.gz; required
    -m, --mask VALUE:ExistingFile       mask for the diffusion weighted mri, e.g. mask.nrrd or path/to/mask.nrrd,
                                        accepted formats: nhdr, nrrd, nii, and nii.gz, if not provided then looks for
                                        default: dwi_mask.format in input directory, if default is not available,
                                        then creates the mask
    -o, --out VALUE:str                 output directory (default: input dwi directory)

See the following sample commands:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i sample/dwi/image.nrrd -a
path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i sample/dwi/image.nii.gz -a -o /tmp/

# with mask, notice the arbitrary combination of nrrd and nifti formats
path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i sample/dwi/image.nrrd -m sample/dwi/mask.nii.gz -a
path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i sample/dwi/image.nii.gz -m sample/dwi/mask.nrrd -a -o /tmp/

Please see Automatic processing and Visual processing below for details.

Tests

i) Download the sample dwi image. Type GradQC in Slicer>Modules search icon, and select it from the drop down menu. Load the sample dwi, check Create the mask and hit Process. If the process completes without any error, installation is successful. You can observe the output files in sample dwi image directory.

ii) From the command line, you can test as follows:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i sample/dwi/image.nrrd -a

ii) (Optional) You can clone the repository and run test as follows:

# Linux/MAC
git clone https://github.com/pnlbwh/SlicerDiffusionQC.git
cd SlicerDiffusionQC
path/to/Slicer --launch python-real Test/run_test.py

# Windows Powershell
path\to\Slicer-4.*\Slicer.exe --launch python-real .\Test\run_test.py | more

SlicerDiffusionQC/Test/Baseline contains reference results. If installation is successful, the above command will create some files in a temporary directory. Follow STDOUT to see success.

NOTE You need to have git lfs set up on your machine (run_test.py makes use of it):

Download Git command line extension

tar -xzvf git-lfs-linux-*
PREFIX=$HOME ./install.sh
export PATH=$PATH:$HOME/bin/
git lfs install

Automatic processing

Some command line calls are shown below. Although the examples show only nrrd format, you can use both nrrd and nii.gz formats with this software. A few more examples are given in Usage section. Notice the presence of -a flag at the end of each command shown in this section that triggers automatic workflow i.e. process given data and save modified data without visualization.

i) When you do not have a mask, you want the pipeline to create one, and you are okay with saving results in the input directory:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i path/to/input.nrrd -a

ii) When you have a mask, and you are okay with saving results in the input directory:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i path/to/input.nrrd -m path/to/mask.nrrd -a

iii) When you want to specify an output directory:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i path/to/input.nrrd -m path/to/mask.nrrd -o output/directory -a

The above command line calls save temporary .npy files and final results- inputPrefix_modified.nrrd and inputPrefix_QC.csv.

Visual processing

Type GradQC in Slicer>Modules search icon, and select it from the drop down menu.
Specify the input image, input mask, and output directory. Hit Process. Based on the power of your machine, it might take a few minutes to see the results on Slicer. The rest should be interactive.

The GUI is made in a nice way to load your inputs instantly with mask superimposed on the original image as a labelmap. The Interpolate feature is turned off so you are able to look at the actual signal drops and artifacts.

The CLI wrapper makes following command line calls and creates temporary files as explained below:

path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i path/to/input.nrrd -m path/to/mask.nrrd
path/to/Slicer --launch python-real /path/to/cli-modules/diffusionQC.py -i path/to/input.nrrd -m path/to/mask.nrrd -o output/directory

Saves inputPrefix_QC.npy, inputPrefix_confidence.npy, and inputPrefix_KLdiv.npy. The temporary files are loaded in Slicer GUI. After user interaction, when Save is selected, the results are saved as inputPrefix_modified.nrrd and inputPrefix_QC.csv.

If mask is not available, keep the Input Volume Mask field empty and check Create the mask. Then, inputPrefix_bse.nrrd and inputPrefix_mask.nrrd are created.

The following are run modes from GUI:

i) Slicer Visual Mode (checked) and result files exist: does not do gradient processing again. Uses existing result files to display on Slicer, waits for user interaction and Save.

ii) Slicer Visual Mode (checked) and result files do not exist: runs the whole program, uses created result files to display on Slicer, waits for user interaction and Save.

iii) Slicer Visual Mode (unchecked): irrespective of result files' existence, triggers automode and runs the gradient processing again. Since autoMode is triggered, Slicer GUI interaction does not open.

Switching among gradients:

Select each row in the table and the display will update with correspoding gradient.

Switching among slices:

Select a point in the graph and the axial axis display will update with corresponding slice.

Sure/Unsure and Pass/Fail:

Click the appropriate pushbutton to classify the current gradient on display. The text in the table will change accordingly. The gradients marked Fail will be discarded when saving as a modified image.

Next Review:

If you have many gradients and you would want to switch among the unsure predictions only, hit Next Review and the display will update with with next unsure classification.

Reset Results:

During your modification, if you would like to go back to the machine learning decision, hit this button.

Save:

Once you are done, Save the results and it will replace any previous modified image with the same prefix in your output directory.

NIFTI support

Slicer i.e. ITK can load only NRRD diffusion weighted images. It makes use of the "measurement frame" property present in the NRRD header. Since NIFTI diffusion weighted images does not have any such property, it cannot be loaded into Slicer. For that reason, SlicerDiffusionQC was developed as an NRRD-only tool. So, the way around was NRRD-->NIFTI conversion using DWIConvert. Over time, DWIConvert has not been found as a reliable converter due to bugs discovered. On the other hand, having both NRRD and NIFTI format of the same data is wasteful of memory. To overcome the above limitation, yet provide and elegant way of NIFTI-->NRRD conversion, we have developed an engineering solution of writing NHDR header of NIFTI file pointing to NIFTI as the data file. conversion/nhdr_write.py script writes an NHDR header of the given NIFTI data and the modified NIFTI data. When NIFTI diffusion weighted image is given to this software, it writes the associated NHDR header in the background, loads the NHDR header i.e. NRRD diffusion weighted image, does all the processing, and writes back modified data in NIFTI format along with NHDR header. As you probably realized, there is no extra step on the user for quality checking a NIFTI diffusion weighted image.

Executables

Clone the repository git clone https://github.com/pnlbwh/SlicerDiffusionQC.git in your local directory.

diffusionQC.py is the cli-module that can be run from the command line. On the other hand, GradQC.py is the GUI module that is loaded into Slicer.

The SlicerExecutionModel wrapper describes the input/output of this script for use by Slicer. The Slicer scripted GUI module code is within the SlicerDiffusionQC subdirectory.

Development mode

We welcome any contribution to this software. To facilitate contribution, we are providing the following instruction.

Clone repository

git clone https://github.com/pnlbwh/SlicerDiffusionQC.git

The modules of interest are diffusionQC/diffusionQC.py and SlicerDiffusionQC/GradQC.py.

Download Slicer

Download a fresh Slicer-4.10.0. It may be useful to remove your ~/.config/NA-MIC directory (mv ~/.config/NA-MIC ~/.config/NA-MIC.bak) so any old settings cannot get into the fresh Slicer environment.

Run using Python

diffusionQC/diffusionQC.py module requires a Python 2.7 interpreter. You can use an independent Python 2.7 or the one that came with Slicer download. For development work with Python 2.7, please make sure to provide a mask.

Independent

Install Python 2.7 with the following packages:

pip install plumbum pynrrd nibabel

Then

# Linux/MAC
export PYTHONPATH=path/to/SlicerDiffusionQC/diffusionqclib/
# Windows PowerShell
$Env:PYTHONPATH+="path\to\SlicerDiffusionQC\diffusionqclib"

~/miniconda2/bin/python \
path/to/SlicerDiffusionQC/diffusionQC/diffusionQC.py -o /tmp -i dwi_nifti_or_nrrd -m mask_nifti_or_nrrd -a

Slicer

cd Slicer-4.*-linux-amd64/bin
./python-real

from pip._internal import main as pipmain
pipmain(['install','plumbum','pynrrd','nibabel'])
exit()

Then

# Linux/MAC
PYTHONPATH=path/to/SlicerDiffusionQC/diffusionqclib/ /path/to/Slicer-4.*-linux-amd64/Slicer/bin/python-real \
path/to/SlicerDiffusionQC/diffusionQC/diffusionQC.py -o /tmp -i dwi_nifti_or_nrrd -m mask_nifti_or_nrrd -a

# Windows PowerShell
$Env:PYTHONPATH+="path\to\SlicerDiffusionQC\diffusionqclib"
path\to\Slicer-4.*\Slicer.exe --launch python-real path/to/SlicerDiffusionQC/diffusionQC/diffusionQC.py \
-o /tmp -i dwi_nifti_or_nrrd -m mask_nifti_or_nrrd -a | more

Work on GUI module

In the above, we have described about development in the CLI module diffusionQC/diffusionQC.py. Here we describe how you can contribute to the GUI module. Firstly, we need to append path/to/SlicerDiffusionQC/diffusionqclib/ to PYTHONPATH:

# Linux/MAC
export PYTHONPATH=path/to/SlicerDiffusionQC/diffusionqclib/
# Windows PowerShell
$Env:PYTHONPATH+="path\to\SlicerDiffusionQC\diffusionqclib"

Then, launch /path/to/Slicer-4.*/Slicer from the same terminal. If you have not installed the required packages on python-real yet, you can do it now from Python Interactor on Slicer GUI. Now, add the following path to Slicer>Edit>Application Settings>Modules>Additional module paths:

/path/to/SlicerDiffusionQC/diffusionQC
/path/to/SlicerDiffusionQC/SlicerDiffusionQC/

If no error shows up the Python console, all dependencies are solved and your loading is successful. Now search GradQC in Slicer>Modules search icon, and select it from the drop down menu. Finally, you should be able to follow Visual processing. However, please make sure to provide a mask.

Create mask using SlicerDMRI

So far we have described development infrastructure with provided mask. If you would like Slicer to generate a mask on its own, you need to install SlicerDMRI extension from the Extension Manager. Then, you can develop without providing a mask:

CLI module

path/to/Slicer --launch python-real path/to/SlicerDiffusionQC/diffusionQC/diffusionQC.py -o /tmp -i dwi_nifti_or_nrrd -a

If you would like the software to create a mask, you must use Slicer python-real. Independent Python 2.7 can not be used in this task.

GUI module

You can check Create a mask box upon loading GradQC.

Troubleshooting

On Windows Git Bash,

cd /path/to/SlicerDiffusionQC
export PYTHONPATH=`pwd`/diffusionqclib
~/Downloads/Slicer\ 4.10.2/Slicer.exe --launch python-real Test/run_test.py

does not seem to work but the following does:

cd /path/to/SlicerDiffusionQC
PYTHONPATH=`pwd`/diffusionqclib ~/Downloads/Slicer\ 4.10.2/Slicer.exe --launch python-real Test/run_test.py

import numpy error on Win and MAC can be solved following #38

Submit issues

Feel free to submit an issue on this github repository. We shall get back to you as early as we can.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Table of Contents

SlicerDiffusionQC

Citation

Installation

Usage

Tests

Automatic processing

Visual processing

NIFTI support

Executables

Development mode

Clone repository

Download Slicer

Run using Python

Independent

Slicer

Work on GUI module

Create mask using SlicerDMRI

Troubleshooting

Submit issues

Files

README.md

Latest commit

History

README.md

File metadata and controls

Table of Contents

SlicerDiffusionQC

Citation

Installation

Usage

Tests

Automatic processing

Visual processing

NIFTI support

Executables

Development mode

Clone repository

Download Slicer

Run using Python

Independent

Slicer

Work on GUI module

Create mask using SlicerDMRI

Troubleshooting

Submit issues