The current MK3S extruder body is 0.4 mm loose(r)

[3Delights]

The user jonnieZG over on the Prusa Forum is reporting that: The current MK3S extruder body is 0.4 mm loose(r) and that it might be a good idea to change this as it is causing the extruder to wiggle.

Please see this forum topic:
https://shop.prusa3d.com/forum/general-discussion-announcements-and-releases-f69/the-current-mk3s-extruder-body-is-0-4-mm-loose-r--t27757.html#p128763

[jonnieZG]

User martin.a22 also pointed out here that it would be good to change the neck grip tolerances from +0.2 mm to 0.1 mm, so the neck socket diameters would be 16.1 mm and 12.1 mm. I added that to my mod here https://www.thingiverse.com/thing:3428292, but it might be a good idea to make the change on the official model as well.

[tstoegi]

Still no comment or recommendation from Prusa yet?

[jonnieZG]

This issue is fixed in R6, as all tolerances are set to the values proposed here. R6 introduces also some other improvements, so we can close this issue as solved.