materials_i3_mk2mm.json

{
  "info": {
    "version": 3.3
  },
  "materials": {
    "prusa_pla": {
      "first": 1,
      "sort": 1,
      "name": "prusa_pla",
      "label": "Prusa PLA",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 3,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 4,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 5,
          "name": "draft",
          "label": "Draft - 0.3 mm",
          "parameters": {
            "layer_height": 0.3,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "solid_infill_speed": 60,
            "top_solid_infill_speed": 50,
            "top_infill_extrusion_width": 0.43,
            "external_perimeter_extrusion_width": 0.43,
            "extrusion_width": 0.6,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PLA",
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 2,
            "bridge_flow_ratio": 0.95,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.42,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.42,
            "solid_infill_extrusion_width" : 0.45,
            "perimeter_speed" : 40,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 30,
            "infill_speed" : 60,
            "solid_infill_speed" : 40,
            "top_solid_infill_speed" : 20,
            "support_material_speed" : 50,
            "gap_fill_speed" : 40,
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_speed": 20,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "solid_infill_extruder" : 1,
            "support_material" : 0,
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling": 1,
            "disable_fan_first_layers": 1,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "first_layer_bed_temperature": 55,
            "bed_temperature": 55,
            "first_layer_temperature": 215,
            "temperature": 210,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100,
            "standby_temperature_delta" : -5
          }
        }
      }
    },
    "prusa_abs": {
      "first": 0,
      "sort": 2,
      "name": "prusa_abs",
      "label": "Prusa ABS",
      "compatible_with": ["prusa_abs", "generic_abs", "pc-abs", "fillamentum_abs", "hips" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.74,
            "top_solid_infill_speed": 50
          }
        },
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "ABS",
            "first_layer_temperature": 255,
            "first_layer_bed_temperature": 100,
            "temperature": 255,
            "bed_temperature": 100,
            "bridge_fan_speed": 30,
            "cooling": 0,
            "disable_fan_first_layers": 3,
            "fan_below_layer_time": 20,
            "fan_always_on": 0,
            "max_fan_speed": 30,
            "min_fan_speed": 10
          }
        }
      }
    },
    "prusa_pet": {
      "first": 0,
      "sort": 3,
      "name": "prusa_pet",
      "label": "Prusa PET",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "retract_length": 5,
            "first_layer_temperature": 230,
            "first_layer_bed_temperature": 85,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 30,
            "max_fan_speed": 50,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "generic_pla": {
      "first": 0,
      "sort": 4,
      "name": "prusa_pla",
      "label": "Generic PLA",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 3,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 4,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 5,
          "name": "draft",
          "label": "Draft - 0.3 mm",
          "parameters": {
            "layer_height": 0.3,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "solid_infill_speed": 60,
            "top_solid_infill_speed": 50,
            "top_infill_extrusion_width": 0.43,
            "external_perimeter_extrusion_width": 0.43,
            "extrusion_width": 0.6,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PLA",
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 2,
            "bridge_flow_ratio": 0.95,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.42,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.42,
            "solid_infill_extrusion_width" : 0.45,
            "perimeter_speed" : 40,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 30,
            "infill_speed" : 60,
            "solid_infill_speed" : 40,
            "top_solid_infill_speed" : 20,
            "support_material_speed" : 50,
            "gap_fill_speed" : 40,
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_speed": 20,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "solid_infill_extruder" : 1,
            "support_material" : 0,
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling": 1,
            "disable_fan_first_layers": 1,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "first_layer_bed_temperature": 55,
            "bed_temperature": 55,
            "first_layer_temperature": 215,
            "temperature": 210,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100,
            "standby_temperature_delta" : -5
          }
        }
      }
    },
    "generic_abs": {
      "first": 0,
      "sort": 5,
      "name": "generic_abs",
      "label": "Generic ABS",
      "compatible_with": ["prusa_abs", "generic_abs", "pc-abs", "fillamentum_abs", "hips" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.74,
            "top_solid_infill_speed": 50
          }
        },
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "ABS",
            "first_layer_temperature": 255,
            "first_layer_bed_temperature": 100,
            "temperature": 255,
            "bed_temperature": 100,
            "bridge_fan_speed": 30,
            "cooling": 0,
            "disable_fan_first_layers": 3,
            "fan_below_layer_time": 20,
            "fan_always_on": 0,
            "max_fan_speed": 30,
            "min_fan_speed": 10
          }
        }
      }
    },
    "generic_pet": {
      "first": 0,
      "sort": 6,
      "name": "generic_pet",
      "label": "Generic PET",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "retract_length": 5,
            "first_layer_temperature": 230,
            "first_layer_bed_temperature": 85,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 30,
            "max_fan_speed": 50,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "pla_pha": {
      "first": 0,
      "sort": 7,
      "name": "pla_pha",
      "label": "PLA/PHA",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 3,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 4,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 5,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.3,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "solid_infill_speed": 60,
            "top_solid_infill_speed": 50,
            "top_infill_extrusion_width": 0.43,
            "external_perimeter_extrusion_width": 0.43,
            "extrusion_width": 0.6,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PLA",
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 2,
            "bridge_flow_ratio": 0.95,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.42,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.42,
            "solid_infill_extrusion_width" : 0.45,
            "perimeter_speed" : 40,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 30,
            "infill_speed" : 60,
            "solid_infill_speed" : 40,
            "top_solid_infill_speed" : 20,
            "support_material_speed" : 50,
            "gap_fill_speed" : 40,
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_speed": 20,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "solid_infill_extruder" : 1,
            "support_material" : 0,
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling": 1,
            "disable_fan_first_layers": 1,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "first_layer_bed_temperature": 55,
            "bed_temperature": 55,
            "first_layer_temperature": 215,
            "temperature": 210,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100,
            "standby_temperature_delta" : -5
          }
        }
      }
    },
    "woodfill": {
      "first": 0,
      "sort": 9,
      "name": "woodfill",
      "label": "ColorFabb Woodfill",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 3,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 3
          }
        },
        "normal": {
          "first": 1,
          "sort": 4,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 5,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.3,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "solid_infill_speed": 60,
            "top_solid_infill_speed": 50,
            "top_infill_extrusion_width": 0.43,
            "external_perimeter_extrusion_width": 0.43,
            "extrusion_width": 0.6,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 3,
            "bridge_flow_ratio": 0.95,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.42,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.42,
            "solid_infill_extrusion_width" : 0.45,
            "perimeter_speed" : 30,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 20,
            "infill_speed" : 40,
            "solid_infill_speed" : 30,
            "top_solid_infill_speed" : 15,
            "support_material_speed" : 40,
            "gap_fill_speed" : 30,
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_speed": 20,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "solid_infill_extruder" : 1,
            "support_material" : 0,
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling": 1,
            "disable_fan_first_layers": 1,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1.2,
            "first_layer_bed_temperature": 55,
            "bed_temperature": 55,
            "first_layer_temperature": 200,
            "temperature": 200,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100,
            "standby_temperature_delta" : -5
          }
        }
      }
    },
    "timberfill": {
      "first": 0,
      "sort": 10,
      "name": "timberfill",
      "label": "Fillamentum Timberfill",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 3,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 3
          }
        },
        "normal": {
          "first": 1,
          "sort": 4,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 5,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.3,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "solid_infill_speed": 60,
            "top_solid_infill_speed": 50,
            "top_infill_extrusion_width": 0.43,
            "external_perimeter_extrusion_width": 0.43,
            "extrusion_width": 0.6,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 3,
            "bridge_flow_ratio": 0.95,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.42,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.42,
            "solid_infill_extrusion_width" : 0.45,
            "perimeter_speed" : 30,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 20,
            "infill_speed" : 40,
            "solid_infill_speed" : 30,
            "top_solid_infill_speed" : 15,
            "support_material_speed" : 40,
            "gap_fill_speed" : 30,
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_speed": 20,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "solid_infill_extruder" : 1,
            "support_material" : 0,
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling": 1,
            "disable_fan_first_layers": 1,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1.2,
            "first_layer_bed_temperature": 55,
            "bed_temperature": 55,
            "first_layer_temperature": 190,
            "temperature": 190,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100,
            "standby_temperature_delta" : -5
          }
        }
      }
    },
    "xt": {
      "first": 0,
      "sort": 11,
      "name": "xt",
      "label": "ColorFabb XT",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 230,
            "first_layer_bed_temperature": 85,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 30,
            "max_fan_speed": 50,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "xt-cf20": {
      "first": 0,
      "sort": 12,
      "name": "xt-cf20",
      "label": "ColorFabb XT-CF20",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1.2,            
            "first_layer_temperature": 260,
            "first_layer_bed_temperature": 85,
            "temperature": 260,
            "bed_temperature": 90,
            "filament_max_volumetric_speed": 1,
            "min_fan_speed": 30,
            "max_fan_speed": 50,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "ngen": {
      "first": 0,
      "sort": 13,
      "name": "ngen",
      "label": "ColorFabb nGen",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "retract_length": 5,
            "first_layer_temperature": 230,
            "first_layer_bed_temperature": 85,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 20,
            "max_fan_speed": 35,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "ht": {
      "first": 0,
      "sort": 14,
      "name": "ht",
      "label": "ColorFabb HT",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 270,
            "first_layer_bed_temperature": 105,
            "temperature": 270,
            "bed_temperature": 105,
            "min_fan_speed": 10,
            "max_fan_speed": 20,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "cpe": {
      "first": 0,
      "sort": 15,
      "name": "cpe",
      "label": "Fillamentum CPE HG100/HM100",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "filament_type":"PET",
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 260,
            "first_layer_bed_temperature": 90,
            "temperature": 260,
            "bed_temperature": 90,
            "min_fan_speed": 80,
            "max_fan_speed": 80,
            "bridge_fan_speed": 50,
            "retract_length": 1.6,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "t-glasse": {
      "first": 0,
      "sort": 17,
      "name": "t-glasse",
      "label": "Taulman T-Glasse",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 0,
            "disable_fan_first_layers": 3,
            "fan_always_on": 0,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 240,
            "first_layer_bed_temperature": 90,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 0,
            "max_fan_speed": 0,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "edge": {
      "first": 0,
      "sort": 18,
      "name": "edge",
      "label": "E3D Edge",
      "compatible_with": ["prusa_pet", "generic_pet", "xt", "xt-cf20", "ngen", "ht", "cpe", "t-glasse", "edge" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PET",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 230,
            "first_layer_bed_temperature": 85,
            "temperature": 240,
            "bed_temperature": 90,
            "min_fan_speed": 30,
            "max_fan_speed": 50,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "pc-abs": {
      "first": 0,
      "sort": 19,
      "name": "pc-abs",
      "label": "E3D PC-ABS",
      "compatible_with": ["prusa_abs", "generic_abs", "pc-abs", "fillamentum_abs", "hips" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "ABS",
            "cooling": 0,
            "disable_fan_first_layers": 3,
            "fan_always_on": 0,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 270,
            "first_layer_bed_temperature": 100,
            "temperature": 270,
            "bed_temperature": 100,
            "min_fan_speed": 0,
            "max_fan_speed": 0,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "fillamentum_abs": {
      "first": 0,
      "sort": 20,
      "name": "fillamentum_abs",
      "label": "Fillamentum ABS",
      "compatible_with": ["prusa_abs", "generic_abs", "pc-abs", "fillamentum_abs", "hips" ],
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "ABS",
            "cooling": 0,
            "disable_fan_first_layers": 3,
            "fan_always_on": 0,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,            
            "first_layer_temperature": 240,
            "first_layer_bed_temperature": 100,
            "temperature": 240,
            "bed_temperature": 100,
            "min_fan_speed": 0,
            "max_fan_speed": 0,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "hips": {
      "first": 0,
      "sort": 23,
      "name": "hips",
      "label": "HIPS",
      "compatible_with": ["prusa_abs", "generic_abs", "pc-abs", "fillamentum_abs", "hips" ],
      "soluble": 1,
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "ABS",
            "cooling": 1,
            "disable_fan_first_layers": 3,
            "fan_always_on": 1,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "filament_soluble": 1,
            "support_material_threshold": 80,
            "support_material_contact_distance": 0,
            "support_material_interface_spacing" : 0.1,
            "support_material_synchronize_layers" : 1,
            "support_material_xy_spacing" : "30%",
            "support_material_with_sheath": 1,
            "first_layer_temperature": 220,
            "first_layer_bed_temperature": 100,
            "temperature": 220,
            "bed_temperature": 100,
            "support_material_xy_spacing" : "30%",
            "min_fan_speed": 20,
            "max_fan_speed": 20,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 20
          }
        }
      }
    },
    "pva": {
      "first": 0,
      "sort": 25,
      "name": "pva",
      "label": "Primavalue PVA",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "soluble": 1,
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PVA",
            "cooling": 0,
            "disable_fan_first_layers": 1,
            "fan_always_on": 0,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "filament_soluble": 1,
            "support_material_threshold": 80,
            "support_material_contact_distance": 0,
            "support_material_interface_spacing" : 0.1,
            "support_material_synchronize_layers" : 1,
            "support_material_xy_spacing" : "30%",
            "support_material_with_sheath": 1,
            "first_layer_temperature": 195,
            "first_layer_bed_temperature": 55,
            "temperature": 195,
            "bed_temperature": 55,
            "min_fan_speed": 100,
            "max_fan_speed": 100,
            "bridge_fan_speed": 50,
            "fan_below_layer_time": 100
          }
        }
      }
    },
    "bvoh": {
      "first": 0,
      "sort": 26,
      "name": "bvoh",
      "label": "Verbatim BVOH",
      "compatible_with": ["prusa_pla", "generic_pla", "pla_pha", "woodfill", "timberfill", "pva", "bvoh" ],
      "soluble": 1,
      "infill": 20,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "optimal": {
          "first": 0,
          "sort": 2,
          "name": "optimal",
          "label": "Optimal - 0.15 mm",
          "parameters": {
            "layer_height" : 0.15,
            "top_solid_layers" : 7,
            "bottom_solid_layers": 5,
            "perimeters" : 2
          }
        },
        "normal": {
          "first": 1,
          "sort": 3,
          "name": "normal",
          "label": "Normal - 0.2 mm",
          "parameters": {
          }
        },
        "draft": {
          "first": 0,
          "sort": 4,
          "name": "draft",
          "label": "Draft - 0.35 mm",
          "parameters": {
            "layer_height": 0.35,
            "perimeters" : 2,
            "top_solid_layers" : 4,
            "bottom_solid_layers": 3,
            "external_perimeter_extrusion_width": 0.7,
            "extrusion_width": 0.7,
            "infill_extrusion_width": 0.7,
            "perimeter_extrusion_width": 0.7,
            "solid_infill_extrusion_width": 0.7,
            "solid_infill_speed": 60,
            "top_infill_extrusion_width": 0.45,
            "top_solid_infill_speed": 50
          }
        },
        "default": {
          "first": 0,
          "sort": 99,
          "name": "default",
          "label": "",
          "parameters": {
            "filament_type": "PLA",
            "cooling": 0,
            "disable_fan_first_layers": 1,
            "fan_always_on": 0,
            "filament_diameter": 1.75,
            "extrusion_multiplier": 1,
            "filament_soluble": 1,
            "support_material_threshold": 80,
            "support_material_contact_distance": 0,
            "support_material_interface_spacing" : 0.1,
            "support_material_synchronize_layers" : 1,
            "support_material_xy_spacing" : "30%",
            "support_material_with_sheath": 1,
            "first_layer_temperature": 215,
            "first_layer_bed_temperature": 55,
            "temperature": 210,
            "bed_temperature": 55,
            "min_fan_speed": 85,
            "max_fan_speed": 100,
            "bridge_fan_speed": 100,
            "fan_below_layer_time": 100
          }
        }
      }
    },
    "default": {
      "first": 0,
      "sort": 99,
      "name": "default",
      "compatible_with": [ ],
      "label": "",
      "soluble": 0,
      "infill": 10,
      "infillRange": [
        0,
        80
      ],
      "quality": {
        "default": {
          "first": 0,
          "sort": 99,
      	  "name": "default",
          "label": "",
          "parameters": {
            "avoid_crossing_perimeters" : 0,
            "first_layer_height" : 0.2,
            "layer_height" : 0.2,
            "top_solid_layers" : 5,
            "bottom_solid_layers": 4,
            "perimeters" : 2,
            "filament_type": "PLA",
            "extruder_colour": "#FFFF00",
            "filament_colour": "#FF14E2",
            "filament_notes": "",
            "filament_soluble" : 0,
            "wipe_tower": 1,
            "wipe_tower_per_color_wipe": 15,
            "wipe_tower_width": 60,
            "wipe_tower_x": 180,
            "wipe_tower_y": 140,
            "clip_multipart_objects": 1,
            "deretract_speed": 0,
            "max_volumetric_speed" : 0,
            "filament_max_volumetric_speed": 0,
            "retract_before_wipe": 60,
            "single_extruder_multi_material": 1,
            "elefant_foot_compensation": 0,
            "bridge_angle": 0,
            "before_layer_gcode" :";BEFORE_LAYER_CHANGE\\n;[layer_z]\\n\\n",
            "layer_gcode" : ";AFTER_LAYER_CHANGE\\n;[layer_z]",
            "retract_before_travel": 3,
            "retract_layer_change": 0,
            "retract_length_toolchange": 4,
            "start_filament_gcode": "M900 K200",
            "bridge_flow_ratio": 0.95,
            "brim_width" : 0,
            "complete_objects" : 0,
            "dont_support_bridges" : 0,
            "ensure_vertical_shell_thickness" : 1,
            "external_fill_pattern" : "rectilinear",
            "fill_angle" : 45,
            "fill_density" : "10%",
            "fill_pattern" : "cubic",
            "extrusion_width" : 0.45,
            "first_layer_extrusion_width" : 0.42,
            "external_perimeter_extrusion_width" : 0.45,
            "infill_extrusion_width" : 0.45,
            "perimeter_extrusion_width" : 0.45,
            "top_infill_extrusion_width" : 0.45,
            "solid_infill_extrusion_width" : 0.45,
            "external_perimeters_first" : 0,
            "extra_perimeters" : 0,
            "extruder_clearance_height" : 20,
            "extruder_clearance_radius" : 20,
            "perimeter_speed" : 40,
            "small_perimeter_speed" : 20,
            "external_perimeter_speed" : 30,
            "infill_speed" : 60,
            "solid_infill_speed" : 40,
            "top_solid_infill_speed" : 20,
            "support_material_speed" : 50,
            "gap_fill_speed" : 40,
            "first_layer_speed" : "30",
            "max_print_speed" : 100,
            "travel_speed" : 120,
            "min_print_speed": 15,
            "bridge_angle": 0,
            "bridge_speed": 20,
            "gcode_comments" : 1,
            "infill_every_layers" : 1,
            "infill_extruder" : 1,
            "infill_first" : 0,
            "infill_only_where_needed" : 0,
            "infill_overlap" : "25%",
            "interface_shells" : 0,
            "max_volumetric_extrusion_rate_slope_negative" : 0,
            "max_volumetric_extrusion_rate_slope_positive" : 0,
            "notes" : "",
            "only_retract_when_crossing_perimeters" : 0,
            "ooze_prevention" : 0,
            "overhangs" : 0,
            "perimeter_extruder" : 1,
            "post_process" : "",
            "print_settings_id" : "",
            "raft_layers" : 0,
            "resolution" : 0,
            "seam_position" : "nearest",
            "min_skirt_length" : 4,
            "skirt_distance" : 2,
            "skirt_height" : 3,
            "skirts" : 1,
            "solid_infill_below_area" : 0,
            "solid_infill_every_layers" : 0,
            "solid_infill_extruder" : 1,
            "spiral_vase" : 0,
            "default_acceleration" : 1000,
            "perimeter_acceleration" : 800,
            "bridge_acceleration": 1000,
            "first_layer_acceleration" : 1000,
            "infill_acceleration" : 2000,
            "support_material" : 0,
            "support_material_angle" : 0,
            "support_material_buildplate_only" : 0,
            "support_material_contact_distance" : 0.2,
            "support_material_enforce_layers" : 0,
            "support_material_extruder" : 1,
            "support_material_extrusion_width" : 0.45,
            "support_material_interface_extruder" : 1,
            "support_material_interface_layers" : 2,
            "support_material_interface_spacing" : 0.2,
            "support_material_interface_speed" : "100%",
            "support_material_pattern" : "rectilinear",
            "support_material_spacing" : 2,
            "support_material_synchronize_layers" : 0,
            "support_material_threshold" : 45,
            "support_material_with_sheath" : 0,
            "support_material_xy_spacing" : "120%",
            "thin_walls" : 0,
            "threads" : 4,
            "xy_size_compensation" : 0,
            "cooling" : 1,
            "disable_fan_first_layers" : 1,
            "fan_always_on" : 1,
            "filament_diameter" : 1.75,
            "extrusion_multiplier" : 1,
            "slowdown_below_layer_time": 10, 
            "retract_length": 4,           
            "first_layer_bed_temperature" : 55,
            "bed_temperature" : 55,
            "first_layer_temperature" : 215,
            "temperature" : 205,
            "min_fan_speed" : 85,
            "max_fan_speed" : 100,
            "bridge_fan_speed" : 100,
            "fan_below_layer_time" : 100,
            "min_layer_height" : 0.07,
            "max_layer_height" : 0.25,
            "variable_layer_height" : 0,
            "standby_temperature_delta" : -5
          }
        }
      }
    }
  }
}